Counting matching models…
This is my model of the Atlantis as seen in Stargate Atlanis tv series. Model is over 60cm in diameter and approaches 3 kilos. It has already built in preparation for the LED lights so if you want to make the towers and stardrive lit, you…
This is my project Destiny where i designed the Destiny from the SGU with attachable Seedship and a stand. The model is a kit and fits together without any glue whatsoever. For easier assembly, please take a look at the video series about…
This is the new and very much improved version of the BC-304 class from the show Stargate. Originally I intended to release it as a remix of the original one, but the changes are quite large so I decided to post it as an entirely new…
*** UPDATE *** My new DHD model is now available to go with your Stargate model- On Printables !! Download it FREE. *** UPDATE *** Crafted specifically for 3D printing, my fan-designed Stargate SG-1 model brings the iconic sci-fi portal…
This is my Stargate intended to be mounted on a wall. The gate is 80cm in diameter and it comes with separable Iris. The inner ring rotates and it has a preparation for eventual lihting. It is a kit and theoretically does not require any…
This is my model of the Puddle Jumper from the Stargate franchise. It has retractable engine and weapons pods. No interior though. It is little bigger, but in scale with my gates. Here you can see a video about the project includin an…
This is my model of F-302 from Stargate franchize. Once again, the model is designed entirely by me and is meant to be assembled with no glue at all. (Thou in my cas I had to use a little bit of glue to fix a gap that appeared). The…
This is my model of the Stargate in the off-world pedestal with DHD. The model is printable without any support material and could be assembled as a lego - no need for a glue. The inner ring of the gate could rotate and it has teeths…
Stargate Puzzle This is an easy to print basic Stargate Themed puzzle. The parts concist of the main stargate frame (that can be printed in 3 colors if you prefer) and 23 pieces that fit within the frame. I printed my frame in Inland…
This is a model of a Stargate that includes a working Iris. It comes with a pedestal based on the Tauri ramp in SGC. The Iris can be open and closed. For easy assembly, please watch the following video:
This is my 3D printed Chess with a Stargate theme so we have here Tauri and Goauld. Figures are labeled so that you know which figure is which and you can basically use any model you want as those are separate. In the future, I will…
This is a test of my own working Iris from stargate. At first I did not even consider to publish it, but after i published a video about it, i saw that there is a demand so here it is. The iris works, It fully closes and retracts. For the…
This is my project Teltak. Here I designed a Teltak or a Goauld cargo ship from Star Gate. The project comes in 2 versions. Static and Retractable. Static is - as the name suggests - model that is composed of three parts and is completely…
This is my own design for the coaster. It is in the shape of Stargate with Iris. It is little bigger but that is because I prefer “Tuplák” - 1 liter glass of beer and it fits to this coaster really nicely. The Iris has holes in it to lead…
This is my model of BC-304 from Stargate. I named it Ares. It is roughly 60cm long and arround 3 kilo. This is very complex model kit consisting of hundereds parts. I printed and assembled it over a month. The assembly may be kinda hard…
This is another of my Star Gate project. The Arora is 60 cm long and it has retractable third leg so that it can stand on its own without any stand. All fits togeher via pegs and holes. No need for a glue. Check this playlist for the info…
This is my model of the Ancient Cruiser from the Stargate Atlantis. The ship appeared only briefly in the episode Progeny. It is a kit, no glue required. The assembly is very easy but iI recommend to look at the assembly video just to be…
This is the project O'neill where I design a 3D printable model of the O'neill class from Stargate franchize. It is divided into several subassemblies. The model has one unique feature - a retractable landing leg so that it could stand on…
This is the mothership of Goauld Anubis. It has mechanism inside which allows it to retract the superweapons. All the moving parts are linked into that mechanism so one movement will do all. Appart from that, it comes with a fleet of 8…
This is my project of Ori Mothership as seen in the Stargate SG-1. It is around 40 cm long, consists of several pieces that come together like a lego. No glue needed. It has retractable landing legs so no pedestal is needed. I recommend…
This is my model of the Death Glider from the Stargate franchise. I made the model myself and printed it and painted it. The model has all the features seen in the show - foldable wings, retractable cockpit windows, retractable cockpit…
This is my model of the Stargate in the SGC pedestal. The model is printable without any support material and could be assembled as a lego - no need for a glue. The inner ring of the gate could rotate and it has teeths while the pedestal…
This is a model of the X-302 Prototype with the Stargate attached to it as seen in the episode 6x02 Redemtion. Models of the 302 is basically the same as my F-302 so use the instructions there to assemble it. There are only few changes to…
I remixed the design to print the main body as 1 piece so that no line would be visible when illuminated. I designed a hidden switch into the base to turn it on and off. (the center red crystal) I added an interior mount for the lights.…
I proudly present to you my most complex creation yet. Retractable Serpent helmet from Stargate. It has one complex mechanism that moves the whole assembly. It is in 1/3 scale. I highly recommend to watch the YT playlist about this…
This is a simple coaster based on the Milky Way Stargate of the TV series Stargate SG-1. I just added the iris to a design made by Tooner.it
A model of the Palace of Apophis. The model is my own design based on the Stargate movie and the series to connect them more. It has hangar bay for 2 detachable Gliders, Chamber for Apophis, Large Throne Room, Landing area for his…
This is my model of the space gate form Stargate Atlantis. It is basically the same model as before (the Milky Way one) but with different inner ring and three additional power nodes. The video about it is here: If you need further…
History/Story of the Naquadah Generator: https://www.gateworld.net/wiki/Naquadah_generator Prop utilizes Magnets to activate lights ( when Control Interface Handle is in the on position it activates a magnet activated switch turning it on…
This is my model of the Asgard Bilskirnir Class space ship from Stargate. It is once again assembled together as kit - with no glue needed. Not the best model I have done, but still. I uploaded the files in 7z so that the folder structure…
Stargate Dice Tower! Please leave comments and any recommendations. The base pieces and stargate pieces will need to be glued together. The Stargate should rest on top of the base, and it will sort of lock in place. The Stargate and Base…
This is my model of the Stargate from the Stargate Universe series. This s the Offworld gate in pedestal. It has a feature that the the entire gate spins in the pedestal with the help of 2 gears, An assembly video is here:…
Apologies for the photo, the models have moved on. The photo shows a 1:1 scale silhouette of the House Targaryen ornament and the House Stark ornament at 82% and 140% in height with fuzzy skin. Also attached is the source file for Fusion…
This DHD is a remix of a 3D model by "Adder" that I found on Google Sketch-Up 3D Warehouse. https://3dwarehouse.sketchup.com/model/9680dec40b8e7de4de23d525ec10a4eb/DHD I modified the design to make it 3D printable. You will need a printer…
This is my model of the Wraith Hive Ship from Stargate Atlantis. The model is a kit, but some small greebles could definately use some small amount of glue to secure them in place. I really struggle with the organic-based look of the…
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
USS Icarus from Stargate Work In progress Not my design, found it here https://www.turbosquid.com/3d-models/free-3ds-model-ship-space-spaceship/892602 I just made it printable. Have to be big (100%) for 0.4 nozzle Didnt print it yet. You…
The base stargate model i made for this lamp https://www.prusaprinters.org/prints/84419-milky-way-stargate-led-lamp in case somebody could find it useful. I grabbed the glyphs' svgs from Wikipedia, author:…
This is the first part of my own Stargate Jaffa Armour. This Armour will be an amalgamation of the Armour worn by Anubis in the Movie and the Armour of the Serpent Guards from the show. I call it “Roayal Serpent Guard Armour”. This part…
This stargate is designed to fit a 5V led strip with a switch (round hole) and a microusb to dip adapter (rectangular hole + support). The bottom lid is optional, i put one in mostly to make sure that my despicable soldering stays hidden.…
This is my detailed model of the Cheops Class Pyramid ship as seen in the movie Stargate and few episodes of the series. Though the ship is in its landed variant and cannot change, it has one big feature. The top can be open and show a…
Here is our version of Stargate from tv show Stargate SG-1. This is my new favorite print. well detailed & prints without supports. Hope to see a bunch of this printed this year. We are also on gumroad where we list cutup/slicedup props,…
This is my model of the Wraith Dart from Stargate Atlantis. The model is a kit and does not require any glue. It fits through my Pegasus Space-gate so you can nicely recreate the scene of it comming out of the gate. I really struggle with…
I didn't want to spend the time needed to print certain parts of the https://www.printables.com/model/560402-stargate-with-iris-80cm-in-diameter Chevrons with supports that were difficult to clean later. I also needed the central light to…
This is my model of the Wraith Cruiser from Stargate Atlantis. The model is a kit, but some small greebles could definately use some small amount of glue to secure them in place. I really struggle with the organic-based look of the Wraith…
Custom lithophane stand included. This was a test using LuBan instead of my usual applications. It needs work. Software used: Photoshop and LuBan Dimensions: 135xx 133mm x 3.2mm(3.52mm with frame). Print settings and information:…
5ft Lighted Stargate controlled by arduino (Just a heads up its a very long print 900+ hours) Not a beginner project. Need an understanding of wiring/soldering. Need a understanding of programming arduino boards to load my program.…
Created as a secondary stand imitating StarGate Command, for the incredible Kristian's Stargate: https://thestargateproject.com/ Demo: https://www.youtube.com/watch?v=SJy8u8dllmY&t=84s including ZPM as Chevron 8 The ramp needs M2.5x12mm…
This is my version of the original BC-303 version of Daedalus made for the 8th season of SG-1. This version was unfortunately scrapped for the BC-304 Daedalus Class but we can actually see the top view of the original concept in the…
Remixed from the 3 sources listed. The ring is approximately 190mm diameter and the height with the stand is 205mm. Remixed from: https://www.thingiverse.com/thing:87691 https://www.thingiverse.com/thing:2483545…
Naquadah Generator used in the TV series Stargate SG-1, Atlantis, and Universe. Please note that there is a print list that specifies quantities and colors of parts. There is a drawing to help you associate the part names with their…
Just a simple Stargate Ornament - just in time to trim a tree Print instructions Easy print using PLA! I designed this with a little play between the Stargate "stem" and the Staircase Unit - you can either glue it in place, or slide in a…
Simply print flat on the bed whitout supports
my costum Stargate & DHD - Decoration width: 13cm; height: 19cm; length: 21cm enjoy :) Printer: BQ Witbox 2 Material: PLA, white Layer height: Base: 0,2 mm; Gate: 0,1 mm; DHD: 0,1 mm Use the "Ereignishorizont zum Ausschneiden.pdf" file to…
This is my model of the Ancient/Asuran Light Corvette from the Stargate Atlantis. The model is a kit and does not require any glue. The antennas are skipped modelwise and are done with toothpicks. I divided the model based on the color of…
There's 2 STL versions attached with different sizes, also a Blend file in case you whant to make an edit. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 5% Filament material: PLA Notes: Blend file is configured in…
AOcolossus hope this is what you were after, I wasn't sure what size you wanted it or if you need it split print ready or hollowed so it can be worn on the head? Cheers Jace. Oh and do you still want Horrus done too in a similar fassion?
Badge de l'expédition Atlantis de la série Stargate Atlantis, fixer 2 petits aimant 6*2 et il ira parfaitement sur votre réfrigérateur ou autre ;) Possible aussi de l'adapter pour le fixer autrement. Pour un meilleur rendu faire un…
This model as been cut into several sections for an easier print. The rim is separated for the pyramid. This makes it possible to print them in different color. The rim section connects via the 3 stud to the pyramid section. Fist glue the…
Based on rotaruadrian work https://www.deviantart.com/rotaruadrian/art/Stargate-Coverstone-Cartouche-792557313 Two cartouche versions to print glyphs separately or not. You can use special double-sided tape to attach it to the wall, or…
Remix of the Stargate Coaster by Pastry This thins out the coaster's thickness and also splits the wormhole event horizon insert into its own piece. If someone wants to model up an IRIS insert that could be a handy option to add to the…
This is my take on the Ori Fighter form the 10th season of Stargate SG-1. The model is a kit and comes together. It has the same stand as my other fighters. It is in scale with my Stargates. Because the model is very simple, I will not do…
Time and material saving The model has been designed to enable fast, simple and material-saving printing. There are larger and more detailed models, but these require a much larger print area or the printing of several parts. Improvements…
A Stargate Atlantis Themed Door Controller that I remixed from a 3D model by "Ksst" that I found on Google Sketch-Up 3D Warehouse. https://3dwarehouse.sketchup.com/model/d647c7413566a8e9fae947e64ee50374/Atlantis-motion-sensor I made space…
This was personal request from AOcolossus216 to have this PDO file converted to .STL Hope it works well for you and I look forward to seeing some finished photos of it completed ; ) Please note this file was originally uploaded to the net…
This is my own design of how I imagine the standard Ori Stargate they use in their Galaxy. It is amalgamation of the SGU and SG1 gates with some Ori design thrown into it. The model also comes with its own pedestal for the Gate. This gate…
This is a model of the Vanir Cruiser I designed. Just like the one shown in the SGA 5x10/11, it comes with several features. All the moving parts shown in the show are presented on the model as well and all are movable. I had to take few…
kit bashed the aurora and 304 to make this thought it was a cool looking ship so I tried to make it
This is the second part of my own Stargate Jaffa Armour. This Armour will be an amalgamation of the Armour worn by Anubis in the Movie and the Armour of the Serpent Guards from the show. I call it “Roayal Serpent Guard Armour”. This part…
This is a remix Made to work on the Bambu with a 4mm nosel. I also built in custom support for the iris item 3. Added More Clearance so the iris does not lock up and the ring moves easier. That way, you don't have a bad overhang when…
Remix of original model, all credit for the design goes to the original - https://www.thingiverse.com/thing:856114 Original model caused issues when imported into Slic3r. All I have done to this model is repair issues using blenders…
I build this by butchering martin's Aurora and adding extra parts to fill in the gaps
Crafted specifically for 3D printing, my fan-designed Stargate Atlantis deluxe model brings the iconic sci-fi portal to life. Measuring over 27 inches (685mm) in width, the design showcases intricate detailing on both the front and back.…
A set of coasters inspired by the Sci-fi TV show Stargate SG1.
Greetings everyone! I've been working on creating a replica of the Destiny shuttle from the Stargate universe. This one is a low poly sample file. The highly detailed model is moved here:…
I've been wanting a good collection of stargate minis (especially Jaffa Serpent Guard) for a while, but tracking something down has been nigh impossible, so I figured I'd just make my own and share them with the world. I used…
This ship is never shown in the show and as far as I know is only in the EAW mod but I wanted to add more detail so it would look a bit nicer to 3d print go play the mod…
Please do not print and sell this model, its for FREE personal use only. This is a detailed model kit of the Stargate M.A.L.P from the Stargate TV series. I designed this from scratch as a homage to the creative talents from the TV series…
This is my first attempt at making a STL file in Fusion 360 so please be kind, Thank you.
Inspired by a location from the sci-fi universe of STARGÅTE , MiniWorld 3D brings you a classical ancient Egyptian building, consisting of two obelisks and a long ramp leading up to a twin faced palace, with a descending tunnel. In…
The source marked this model as adult content.
Crafted specifically for 3D printing, this is my fan-designed Stargate Dial Home Device (DHD) display model. It makes an impressive centerpiece for any display. Measuring 7.5(H) x8.5(W) x6.5(D) inches or 190(H) x 215(W) x 165(D) mm, this…
REMIX de https://www.thingiverse.com/thing:3176195 se escalo el objeto a una dimensión mayor (11cm de altura) se agrego el lema de la casa Targaryen "FIRE AND BLOOD" Category: Office
A fully printable clasp based on the one worn by Daemon Targaryen (Matt Smith) in the upcoming Game of Thrones prequel House of the Dragon. Included are the left and right clasps with a snap fastener to hold them together and a smaller…
Perhaps in homage to one of my all time favorite TV shows, or maybe in hopes that it will actually send my cats half a galaxy away to use the litter box, either way it makes me smile. (The cats are indifferent.) The portal allows them…
This is my model of the Stargate as it appeared in the show Stargate Universe - Destiny type gate. The model is intended to be hung on a wall just like my previous 80cm gate. The model has already prepared cable management and the white…
11-30-2022 Update - See the New Version of the GSTP (Gameboard Segment Test Print). New STLs and a pre-sliced file have been included Update: Added a photo to show the size of the gameboard - it includes the industry standard “Toaster…
A Game of thrones inspired signet ring for House Targaryen with detailed texture and relief symbol. Uses the cylinder as a modyfier to change color, with just one filament change; works best with .2 nozzle. Size chart In the file the ring…
Stargate SG1 REPLICATOR from serial stargate
Game of Thrones coaster - Targaryen Diameter : 100 mm Dessous de verre/décoration Game of Thrones coaster - Targaryen Diamètre : 100 mm
Originally started with the idea of recreating the Atlantis logo located in the City. I drew the logo in SVG to cut it out of the wood. See my final photo. To be able to share it with you, I made an STL version, you can also find the svg…
This was a quick 20m job in openscad, importing a House Targaryen symbol and making it into a plaque. Wanted to try out the colour swapping based on layer on my Prusa i3 MK2S and this seemed like a good idea. Really loved how it turned…
Hi AOcolossus let me know if it needs any further modification, I've thickened the shell smoothed it a little and split it up in sections to help with the printing process. Good luck and post some pics where you can, Cheers Jace ; )
This is the missile of the F-302 from Stargate, designed by taichl. For easier printing I made some minor changes and integrated the support material in the STL file. You can remove the support material with a side cutter. For more…
Easy printing with PLA Smooth with adjust Paint and glue I have also left enough space to include an LED strip A stand is still coming Have fun with it
Merlin's Phase-Shift Device is a Prop based on the one seen in Stargate SG1 (episodes 9x18, 10x12, and 10x13) Assembled dimensions 21.9 x 11.5 x 3.4 inch (555 x 292 x 86 mm) Parts to print: 1 - L1-A 1 - L1-B 1 - L1-C 1 - L1-D 1 - L2-A 1 -…
This is the third part of my own Stargate Jaffa Armour. This Armour will be an amalgamation of the Armour worn by Anubis in the Movie and the Armour of the Serpent Guards from the show. I call it “Roayal Serpent Guard Armour”. This part…
