Search results: thick

Laptop Stand - Remix for Thick Laptop

See https://www.printables.com/model/378521-laptop-stand/files for details. Use this model for the sides if you have a thicker laptop.

Slimline Joystick Mechanism - 19mm thick - Good for a Thumbstick

Firstly, if you want an arcade joystick mechanism more fit for an arcade control panel then click on this link: https://www.printables.com/model/987973-arcade-joystick-mechanism-version-3 That's my Arcade Joystick Mechanism - Version 3,…

Makita 2012NB thickness Planer to 63mm hose adaptor

A simple adaptor to connect the Makita 2012NB thickness planer extractor shroud to a 63mm flexible hose in a dust extraction system gcode reflects a PLA print, but as my mini hates PLA its a really slow config

Thick Pump Kit Dust Cover Remix

These are modified versions of the APX-24 parts to fit my pump kit.

Simple Hole Cover with Thicker, Light Blocking Top for AeroGarden

Remix of simple hole cover that should be compatible with any AeroGarden product. Additional layers on the top of the cover (base of the print) completely block out the light, reducing the possibility of algae growth in the water…

Thicker tube for reloadable firework mortar

Thickend the tube and made the fuse hole 0.5mm smaller

Thrustmaster T16000M HOTAS Desk Mount Thicker Desk

Just edited the desk part with threads for thicker desks. Dont forget the support arm, it's shorter.

EOTech / Holosight / Reddot Lens-Protector Killflash Slim for 3mm thick Plexiglass

I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…

Thick Heart Dish 2 Versions

A nice little storage spot for precious items like rings and things. Scalable. No supports. Very strong. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

8mm PVC Spool Spacers (1.5'' ID / 1.9" OD) Thickened

5mm and 10mm spacers to clip onto a 1.5 inch pipe to keep filament rolls from moving around when storing them. This can be used with the Ultimate Filament Dry Box. In the picture the black colored spacer is the original.

Ender 3 S1 usb cable fixer for thicker amazon basic cable

I tried to use usb cable fixer on printables / thingiverse, but I could not make the cable through the hole.

Thick drag chain kit for adventurer 5m (Minimal DIY Enclosure)

The standard chain starts to sag and beat against the case over time, so I decided to print myself a new one, however, I prefer the simplified drag chain termination and I would like to use the spool holder from @design8studio in the…

PTFE Tube Fitting Mount (Thick version) – No Connector Needed – Compatible with Elegoo Neptune 4 Series

This is an adapter that allows you to attach the filament tube directly to the print head assembly without any connectors. It is recommended to use support normal when printing for the best surface finish. This drawing is applicable to…

Trim Wheel Case with Thicker Walls

I made the radius walls almost 3 times as thick as the original for a sturdier construction. Also, the holes didn't fit the rotary encoder that I had so make sure you measure those up before printing.

25mm Base - Thick Wall

Just a 25mm base with a bit thicker walls to avoid the layer line you usually get when moving to the “hollow” layers of the base. Still contains a small cavity for a magnet. I'll come back and fill this out with other base sizes at a…

Jeep Wrangler Horizontal Phone Holder up to 13.75 mm Thick

Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro. It also fits my iPhone 16e. The brackets can hold a phone, with or without a case, up to 13.75mm thick and 149 mm tall. While I was…

Thick Sealed Screw Top Container

31/08/2025 - // Update - Added Different Gasket/ Seal(s) for those who need or prefer different ones. Part Dimensions: Lid + Bottom - 4.75 in. Tall, 3 in Diameter Bottom - 4.35 in. Tall, 3 in. Diameter Lid - 0.75 in. Tall, 3in. Diameter…

A spooky witch’s cauldron with a round pot, three short legs, and a thick rim

Cauldron

Jack-o’-Lantern thicker walls and open face

I really liked the original design – definitely one of the best Jack-o’-Lantern models I’ve found so far! For my remix, I made the walls a bit thicker than the vase mode version to make it sturdier while still keeping it lightweight. I…

Remotes Stand (3 thick, 3 thin)

Stand for TV remotes. It has six slots; three thicker, three thinner. Print with PLA or PETG, no supports needed.

Modular Glasses Display Stand (165mm Width for Thicker Frames)

Custom made to fit my Warby Parker (Callum model), which use a significantly wider holderback width than the default. Graylynn 's remix of the original model does increase it to ~155mm, but it still comes a bit shorter for my…

iPhone 17 Pro Thick Protective Case | Heavy-Duty 3D Printed Bumper | Shock-Resistant TPU/PLA Case 3MF

This is a thick, heavy-duty protective case designed specifically for the iPhone 17 Pro , using official device dimensions for a precise fit. The case features a reinforced outer shell, strong perimeter bumper, and extra-thick walls to…

Neptune 3 Pro Filament Guide for Sensor w/ thicker walls

M10 Mount with thicker wall for thread

Skadis Letter Holder - Thicker Bottom Plate

A letter holder with 3 dividers and a functional Skadis front, with a 2mm thicker bottom plate so you can put on slightly heavier things and have less chance of sagging.

Laser Elevated Magnetic Hold Down for Honeycomb Bed - Metric Thickness Material Laser Clamp 3D STL File

Low-Profile Hold-Down Clamp – Digital File (STL & 3MF) Upgrade your laser engraving setup with this low-profile hold-down clamp, designed to securely elevate your material above the laser bed. By lifting the stock, this clamp helps…

Soap dish thickness

Non era adatto lo spessore per il salisendi così ho deciso di progettarlo e stamparmelo da me.

UPDATED Miniature Rubbermaid Storage Bin with Stackable Lid - Thicker Walls - Durable

Updated April 24, 2026 What's new More durability with thicker walls (2 walls) Completely redesigned geometry for cleaner file Updated lid now matches the shape of the container Printing Tips 3 Walls Save filament: 0 Top/bottom layers 0…

Dewalt DW734 Thickness Planer Dust Port to Festool CT Series Hose Adapter/Reducer

I needed an adapter for my Dewalt DW734 Thickness Planer to work with my Festool CT26 with the CT CYCLONE large particle debris separator. I couldn't find one so I made one, in two parts. Body and an o-ring. Main Body Printed in PETG 15%…

Oreck XL21 Carpet Riser (helps it work on thicker carpet)

This is a riser/spacer for the bottom of the vacuum near the roller to replace the stock thin one with a thicker one to create more space/less resistance on the roller. I made it because my belt on the roller kept slipping on thicker…

Magnet panel base for different thickness

The back panel and foam of my Formbot kit had a different thickness (4.5mm) so I remixed the base pieces. If you need even more you can change the fusion parameter "height" to your desired thickness.

Coffee Mug Bookmark (Thicker)

Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: Yes Infill: 50%-60% Filament material: PLA Filament brand: esun Filament color: white/brown

Thickness Gauge Holder

This is a simple holder for my iGaging Electronic Thickness Gauge. It holds the gauge and the 5 other tips for the gauge. This model mounts to a Dowel rod with a diameter of 1-3/8" or 35mm. STEP file included if you want to change how its…

Lego Compatible 74698.dat Tile Round 2 x 2 - Thick Lifting Ring

This model is compatible with the lego system.

Blum hinge damper adapter with snap fit (thicker flanges)

This is quick remix of Thomas H 3D 's Blum hinge damper adapter. It has the default values of that model (5mm screws with a distance of 32mm) as that works perfectly with the IKEA Billy bookcase.

turbo darts and launcher for thicker rubber bands

see original model for assembly

Tablet stand for Lenovo K11 Plus (and anything else 7.5mm thick)

spin fidget thicker

its thicker

Sy's Peglock Attachment For 1/8" Thick, 1" C-C, Pegboard

This attachment is modified to fit the pegboard on my Harbor Freight Yukon workbench which is a bit over 1/8" thick.

Wide funnel grommet for chipboard with 18mm thickness

I printed with Signal White PETG from Prusament. Slightly revised Brace9's remake of czargb's filament grommet to be shorter so it can be mounted on a 18mm chipboard Drill hole is unchanged at ¾" or 18mm.

Lithophane Thickness Tester (0.16–2.08 mm)

This is a simple lithophane calibration square designed to help dial in optimal wall thickness and light transmission for your printer, filament, and light source. The model transitions smoothly from 0.16 mm to 2.08 mm in 0.08 mm…

Headphones hanger to a 18mm thickness of a desk

It's a corner hanger for a desk where you can hang your headphones It's made for a 18 mm of a thickness of your desk board, it's a most popular thickness of forniture boards :333

Shot Glass with Thick Bottom

Description This is a 49.9ml (1.69oz) shot glass. With 6 walls it has a good weight on bottom so its very stable. Rounded corners for easy cleaning. Print at .12mm layer height for smooth finish. Shot glass in pictures was printed in…

Thick Jasmine

These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…

Thick Lady

Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…

Thick Nun

Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…

Thick Woman Tight Dress

Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…

Desk Cable Organizer (37mm Thickness)

ired of messy cables? This organizer is designed to fit perfectly on 37mm thick desks. It provides a secure grip to manage your power cords and USB cables. For the tech enthusiasts, I’ve included CAE stress analysis screenshots in the…

Desk Power Strip Holder (35mm Thickness)

Say goodbye to cable chaos! This holder is specifically designed for 35mm thick desks to keep your 3-way power strip secure and accessible. Print Settings: Material: PLA (PETG for more flexibility) Infill: 20% - 25% Layer Height: 0.2 mm…

Enclosure for SATA 2.5 inch Hard Drive - for 10mm thick drives

Changes I made it able to support a 10mm thick drive (instead of 7mm). I also added fillets and chamfers just to kind of polish it a bit. On my way toward doing a make of this nice design by Scott Gibb, I also created this remix. I used…

1U Rail Shim for 10-inch mini-rack (3.5mm thickness)

10-inch Mini-Rack - Rail Shim - 1U I created this 3.5mm thick, 1U rail shim for a 10-inch mini-rack to allow mounting thinner steel blanking plates and brackets flush with thicker 3D-printed brackets and blank plates. Typically the metal…

Case for Zigbee round thermometer (Tuya or HA) diameter 40mm, thickness 14mm

Housing for Zigbee round thermometer - hydrometer (Tuya or HA) diameter 40mm, thickness 14mm for outdoor use Pouzdro pro Zigbee kulatý teploměr - hydrometr (Tuya nebo HA) průměr 40mm, tloušťka 14mm pro venkovní použití

Stylized Rose Stem With Thick Petals Leaves And Bud Detail

A stylized rose with thick petals and a solid stem. Perfect as a gift

Thicker 4mm PTFE Tube Cutter (45-degree)

I just cloned the model and made the second one a little taller and wider in my slicer, then exported as a single STL, haha. The original's walls were too thin to print very well with my machine. This is only the 4mm variant. I also cut…

Icom 2100H ham radio speaker gasket, original and thin variant for thicker speakers

When replacing the broken speaker on my Icom 2100H, the replacement speaker was slightly thicker than the original, such that the speaker and case didn't fit cleanly in place. I duplicated the original design precisely, then made a…

IKEA LACK SHELF (or any other 50 mm thick shelf) holder for photos or messages

I originally created this to block light from an LED strip that was shining into my eyes. I also designed it this way so I can store some notes or photos there and keep all my deadlines and things I like close and clean.

Skadis Universal Drawer - Drawer with thicker walls

I used PLA from fila3D.ca to print the drawer. Print settings: Prusa Mini+ 15% infill Gyroid for stronger walls

Thick girl vault dweller fallout

Thick girl vault dweller fallout who is ready for combat. One version with a base included, but the one without is pretty stable. Be careful removing the support around the sword and hand. It might need a snip or two and a but of a…

Jeep Wrangler Horizontal Phone Holder Up To 17.75 mm Thick

Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro that I always had either the Imperial Cog, Rebel Alliance, or SpaceX case with built in two credit card holder that I designed (see…

Jeep Wrangler Horizontal Phone Holder Up To 18.6 mm Thick

Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro that I always had either the Imperial Cog , Rebel Alliance , or SpaceX case with built in three credit card holder that I designed.…

soap dish for shower cabine 5mm glass plate thickness

soap dish for the shower cabin

Cabinet door hook (17mm door thickness)

I created this model in order to be able to hang things from cabinet doors. It is nominally designed for doors with 16-17mm thickness. There are 2 variants. Variant 0deg : the door is clamped with using parallel elements. Can have some…

Thick Bear

Pappa Bear got that bbl

FLSUN QQ-S Cooling Duct with Thicker Body and Anti-vibration Clip

The original version was great when I had the stock hotend, but now I have a different one that needed more depth for the fan to be blowing in the correct spot for filament cooling. And, because I changed my entire hotend setup, save for…

Thickness Plates for Measuring Thickness on Lucy Clay Machine

Be careful when using them: do not damage the rollers and never use filaments containing metal . For best accuracy, place two identical plates — one on each end of the rollers — when testing the gap. This ensures the rollers are set…

25mm thick closet blinds/bifold/french door magnetic catch

I converted a 25mm thick closet bifold door to french doors by duplicated the bifold hardware on both sides (I didn't want to mount hinges). I made this door catch to keep the new french doors from swinging too far inward as well as…

Peg board hook for 4mm thickness board

Remix of "Customizable Pegboard Hook ver.2" for 4mm thickness PEG board by stretching 1.5mm

IKEA Stuva Hook - Thickness Variations

Ikea Stuva hook with many variations of thickness. 10, 20, 30, 40mm You can use for the Stuva changing table, for the bed or any other application. There is also the step file in case changes are needed.

Samsung Galaxy S20 Cover Thickened and Notched

Original model kept breaking edges, even across layer lines, so I made the walls thicker which made the need for an actual notch for buttons much more apparent. Photo shows my logo added before slicing.

Terry Pro Organizer 16 | Cubicle Hanger | For 1 7/8" Thick Wall

Simple Hanger intended for the Terry STORE-AGE SPA Pro Organizer 16 storage case. Fits over the top of a 1 7/8" cubicle wall. distance from the bottom of the case to the outer edge of the handle is 1 7/8" (coincidentally) Designed to be…

Thicker Deadlock logo coaster

Btw I printed mine from Polymaker ToughPC and applied oil paint due to lack of AMS. (grey smears aren't skill issue - they are a significant detail)

.071 thick guitar pick with keyring hole

I wanted a pick that was in between a .051mm and 1.0mm and close to the size of my Gibson picks but just a tad more uniform in size to fit my finger knuckle better, so I made it .071 thick and designed it after a pick I bought from Gibson…

Mouthpiece Labs -- sax mouthpiece forms with various beak thickness

These are mouthpiece shapes with various beak thicknesses. For real saxophone mouthpieces, we have a parametric mouthpiece modeling engine at mouthpiecelabs.com . Visit the site the create yours! Testing instructions: pick Soprano, Alto,…

Lego Compatible (2012.dat) Minifig Breathing Apparatus 2 Thick Tubes (SW Cad Bane)

This model is compatible with the lego system.

Blackmagic Design 12g Video Assist 7” Thicker Cover (fixed)

Original cover was way too thin, flimsy in PETG so I made it about 3mm thick and fixed the STL errors. Enjoy!

Shower Glass Thickness Gauge

This is a simple measuring tool designed to quickly determine the thickness of shower glass panels. Its comb-style design features calibrated slots ranging from 4 mm to 12 mm , with 1 mm increments , allowing you to precisely identify the…

Cyber Thunder - Carbon 13 thick conversion kit

This is basically a port of the Thunder Thighs kit for the new Carbon 13 figure, with some cyberpunk styling added to my personal build As per requests on the older kits, this one includes pretty much all the parts, so you don't have to…

Easter book mark Thick

This model is a Easter themed book mark. I haven't printed it yet so I don't know what settings to use.

ESRack - Mounting Brackets Thick

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

The Drawn Line - Thicker Printed Priming Bar

Uglier, wider, less flexible printed priming bars to help prevent catch slippage. Now requires longer 16-18mm screws.

Filament spool holder adapter from thick frame to default Prusa model for 6mm frame

My printer was built around 10 mm steel thick frame. So the standard spool holder is insufficient and I had it printed already. So I designed this to accomodate the spool holder for standard 6 mm thick holder. Snaps on the frame and then…

Frame Adapter for Einsy box for Prusa MK3 for custom thick frame

If you plan to build custom Prusa MK3 with thick steel frame you can use this part to hold Einsy box in place on frame with zipties. Feel free to remix for various thicknesses. The tabs on bottom are not really useful but the top one is…

Voron 2.4 270° Front Panel Hinge - Removable (support thicker foam)

my acrylic panels had some thicker foam on them so the originals wouldn't close. extended the hinges by both 1 and 2 mm. i needed the 2mm longer hinges to be able to close my doors.

Samsung Galaxy A55 Protective Case (TPU) slightly thicker

Printed with FLEX Semisoft TPU A85 from extrudr (SKU: 9010241122028 ) on BambuLab A1mini. Printed on Bambu 3D Effect Plate (Carbon Fiber)

ROCKBROS phone holder fix for thicker phones with cases

Fixed phone holder hold for thicker phones with cases. Version 3 - working. Printed in PETG. I'm also including the FreeCad project. My phone didn't fit in the holder with the case, so I designed a cover to fit inside and hold it.…

Longer arms for the thicker Carbon 13 Type F

Uses the same bones as the original

Self-Bow Limb Thickness Marking Gauge

I designed this model after being frustrated every time I would mark self bow limb thickness on a stave with crown. It prints best in PLA due to the significant overhangs but it got by with PETG as well so shooters preference depending on…

Modular Stackable Storage Bins – Thick & Thin (Supports Needed)

Stackable Organizer Box – Heavy Duty & Light Version Clean and practical modular storage bins for your workshop, desk, or makerspace. I designed two versions to fit different needs: 1. Heavy Duty Version Thicker walls and stronger base –…

Front Screen Only Thick Z Fold 7 Case

Front screen only, thick protective case for the Samsung Galaxy Z Fold 7, remixed from Allison F’s “Thin Samsung Galaxy Z Fold 7 Case with Camera Bump.” I adjusted chamfers, fillets, and overall geometry to more closely match my broken…

Lego Mandalorian Armor (Plain or Tribal) - Thicker neck plate

I really liked the armor made by 3Dforlife, but the first two sets I made split while trying to remove the supports. I modified his armor and made the neck plate thicker (which helped a lot). I added the tribal versions just for kicks.…

10 to 105mm hollow pyramids with ~2.5mm thick walls

My hollow spheres are popular so I decided to work on other shapes as well. Basically made pyramids in tinkercad going up in 5 mm increments then cut a hole inside with a pyramid that was 5 mm smaller and centered inside. The size of the…

Plant hanger for thick shelves

I have thick 1.25" shelves around a large south facing window that i wanted to hang plants from without putting holes in the shelves. I printed this to mount on the shelf allowing for 2 hanging position based on the size of the basket.…

10 to 105mm hollow cones with ~2.5mm thick walls

My hollow spheres are popular so I decided to work on other shapes as well. Basically made cones in tinkercad going up in 5 mm increments then cut a hole inside with a cone that was 5 mm smaller and centered inside. The size of the model…

Yet another retainer shelf clip for 5/8" thick shelf with 1/4" peg

This is yet another retainer shelf clip for a 5/8" thick shelf with 1/4" peg. My cabinets were missing a few of these, so I used a micrometer to measure the original clip and produce a new one with some modifications. @Wyldesyde007…

Thicker Funnel for CANVAS CC2 threads

Printed perfect with: No Supports PETG or similar Shout out to Slava for the original design!

8000mAh Back for the LilyGo TDeck Plus (Thick Remix)

Remix of model by by Alley Cat that has additional 4mm thickness. This allows a variation of batteries and antenna wires to fit more comfortably beneath the PCB. Additionally the speaker gets relocated to the bottom below the usb-c (no…

Modern Catch All Tray Bowl with thickened base

A sleek and minimalist catch-all tray bowl designed to bring both style and organization to your everyday space. Featuring smooth, flowing lines and a shallow, gently curved form, this piece offers a perfect balance between function and…

Wallmount with spacer for 2mm thick plates

screw in wall mount with spacer for flat object 2mm thick. spacer is 15mm hole for screw is 5mm plate thickness 2mm I printed 3 for mounting a round 60cm steel plate to a wall outside. I didn't want to drill holes trough the plate as that…

15-105mm hollow half cylinder ~2.5mm thick walls

My hollow spheres are popular so I decided to work on other shapes as well. Basically made half cylinders in tinkercad going up in 5 mm increments then cut a hole inside with a half cylinder that was 5 mm smaller and centered inside. The…

Spool Rod Spacer for 5/16 inch or 8mm thick rod

Part of my filament path design - This is a simple part that took a minute to design, but serves an important purpose. If you have a spool holder and need a spacer between parts you can size this according. The hole is 8.2mm in diameter.…

Ass-Saver for Ergon Saddle with Topeak Fixer - Thicker Version

I love the Asssaver from 3DBen, but with a full-suspension bike and a dropper post, i trashed two of those puppies while jumping with the dropper post set down. It wobbled a little too much and one time it just snapped, the second time it…