Liczymy pasujące modele…
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
Wydruk około 7,17 €–8,76 € nettoWstępna wycena jednego wariantu
You might also like: https://www.printables.com/model/280185-design-reference-radius-ruler-innerouter-1-to-12mm In the computer everything looks huge, but in reality 1mm could be enough or may be too flimsy depending on what you’re trying…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
Star Wars Chopper: Thick Mini Version. Added an even thicker version (2/11/2025) Aptly nammed “Chopperthick.***” Small parts should be more stable. Thanks Ben for the feedback!
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Hats off to the original model: https://www.printables.com/model/228146-hanging-skull-planter-no-supports I simply thickened one area with Meshmixer to improve print reliability. This printed great with NO SUPPORTS and a 0.6 nozzle.
Wydruk około 7,90 €–9,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wargame Walls Thick Section 18 Because the fight goes on in the deep, dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part, citizen! Print these out today! Show your worth! Get back in the fight!…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena jednego wariantu
A thicker version of my previous phone stand for thicker covers.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
I have all my printers fitted with 0.6mm nozzles and the original models had a bit too thin walls for that to work well. I therefore made the walls 2mm thicker + moved the hole for the minifig base 1mm up. This model is based off the…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
Cable holder adaptable to various thickness tables
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
These side brackets are for my Venezuelan red tail boa to have something to climb on in her tote! I use bamboo for Snips to climb on so far so good. .30-layer height and 150% print speed. I used a solder iron to burn holes through the tub…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
I have received a lot of backlash on Reddit, calling this "gooning content", so before anyone calls this “gooning content,” please consider this: X: We must respect women and their bodies! X: You drew a woman with large breasts, you don't…
This print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives. The adapter will fit up to 4 2.5" drives instead and can fit all standard formats (so each of the 7mm, 9.5mm, and 15mm thick…
This is remix of https://www.thingiverse.com/thing:4596529 by thomasotwo@thingiverse I wanted those mountains higher and thicker. So I modified it in Blender to make it thicker and then I scale its height to 133% (10mm). It's still fits…
needed a tablecloth clamp for a 45mm thick table, remixed the great design by bramsky, and it works perfectly Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20 Infill: 50 Filament: Prusament PETG…
This is basically a port of the Thunder Thighs kit for the new Carbon 13 figure, with some cyberpunk styling added to my personal build As per requests on the older kits, this one includes pretty much all the parts, so you don't have to…
This remix adds a bit more material around the bolts for the hinges and latches so that they are less prone to breaking when adding the M3 bolts. I used the original 4mm latch. I printed the case in PLA and the hinges in PETG. You will…
This is a standard camera screw, as included with most tripods. Due to the tiny dimensions, I recommend printing it using the highest resolution/lowest layer height your printer is capable of. The part in the photo was printed at 0.12 mm…
--- Import from Thingiverse / Reupload This was my very first design some years ago and what started my 3d-printing journey. We don't have this planer anymore but this model may still be of use to someone. I also added my original…
This is a simple, cleanly designed tube model with an outer diameter of 16mm, a 1mm wall thickness, and a total length of 40mm. It’s ideal for use in prototyping, cable routing, lightweight structural supports, or custom hobby projects.…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
remixed from HP Elitedesk 800 g2/g1 SFF Server Face by magicGnome96
A pretty standard sized guitar pick with some triangles and circles for looks and grip
Wardrobe-Cabinet-Closet Shelf Brackets 18-19-21-25mm thickness - Reggi piano per armadio Shelf thickness: 18mm 19mm 21mm 25mm Easy to print, optimized filament usage Hardware: Screws as per assembly requirements If you download/enjoyed…
This model can help you when making 3d designs. Open this model in PrusaSlicer Set your desired nozzle, layer height, perimeters, and extrusion width Compare which dimension looks preferable. Typically, I find that the dimension that is…
Stand for TV remotes. It has six slots; three thicker, three thinner. Print with PLA or PETG, no supports needed.
Re-work of Player Box from C_Sharper's Brass Birmingham insert . His insert is great, but my thick tokens won't fit inside. Outside dimensions of the Player Box didn't change, so feel free to combine with the remaining parts from the…
Ever wanted a nice sample of wall thicknesses, but untrusting of those "flat-printed" thickness guides. Well, this is for you! The OpenSCAD file is provided so you can customize things to your liking. Three STL files have been provided:…
A 3D printable bumper that's actually good! This has been redesigned to be more durable than the stock bumpers and significantly easier to print. No need to place it at a weird angle and use tons of supports, this bumper can be printed…
I noticed after a lot of use stress from swinging causes the screw on the handles to fail. I filled in the bottoms of the handles to make it more durable. Aside from that design flaw, original handles are super fun to use. Added some grip…
When you are designing a new part, sometimes it is hard to know which exact wall tickness you should choose. These parts give you a good idea how strong your particular material is in the different wall thicknesses. They can also double…
1-5mm Visual guide for custom prints. Now you can see how thick it will be. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 20 Filament: 3D Solutech Pla Grey Category: 3D Printing
A collection of 18 calibration cubes (20×20x20mm) with wall thicknesses ranging from 5 mm down to 0.35 mm in small increments. Why use this set? Quickly spot over- or under-extrusion. Check if your slicer and printer produce accurate…
A normal doorhook like you know and for heavier thinks a stronger and thicker doorhook.
I have updated my previous design, by adding some extra measurements. I struggle to visualise small thickness's and hole sizes, so I created this rapid print to help me. It's not pretty, but it helps me, with a real life reference, when I…
The need arose for me to check the thickness of a nameplate slot. I can't get the calipers or ruler into a good angle, so I whipped this up to that I can just stick the individual ‘leaves’ into the slot to determine the best fitting…
A hook to hang stuff from that slides on to the edge of a 1/2" thick shelf
I made this specific for my cat bed perch. The cutout is made to fit my cat wall half hexagon cat bed. This is the link to the store I ordered my cat wall bed and shelving from https://rshpets.com/en-us . I highly recommend them! I did a…
Just a 25mm base with a bit thicker walls to avoid the layer line you usually get when moving to the “hollow” layers of the base. Still contains a small cavity for a magnet. I'll come back and fill this out with other base sizes at a…
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: Yes Infill: 50%-60% Filament material: PLA Filament brand: esun Filament color: white/brown
Remixed to support a door with insulation foam applied to it, total thickness of 6mm
The back panel and foam of my Formbot kit had a different thickness (4.5mm) so I remixed the base pieces. If you need even more you can change the fusion parameter "height" to your desired thickness.
Measures gaps. Added a key ring hole and 6mm - 11mm and .5 mm - 5mm The photo shows a couple that I cut in the slicer narrow gaps.
Cursed Gatekeeper Thick Mace is a free dark fantasy miniature for tabletop games, RPG encounters, DND, TTRPG, wargaming, collectors, and resin printing. The STL file is scaled to 82 mm height and is ready for resin printing. Download…
The current Multibuild nameplates for drawers etc do not fit the models so i made a fixed 77,5mm wide plate with 40 degree chamfers that fits perfectly the current drawer models. Use the step or freecad model files for customizing your…
walls: 3 infill: triangles, I used 10% density but you could probably go lower. filament type: I recommend PETG or stronger you have to print two of these, each one is around 150g when using 10% infill. This thing doesn't flex under the…
See https://www.printables.com/model/378521-laptop-stand/files for details. Use this model for the sides if you have a thicker laptop.
Firstly, if you want an arcade joystick mechanism more fit for an arcade control panel then click on this link: https://www.printables.com/model/987973-arcade-joystick-mechanism-version-3 That's my Arcade Joystick Mechanism - Version 3,…
A simple adaptor to connect the Makita 2012NB thickness planer extractor shroud to a 63mm flexible hose in a dust extraction system gcode reflects a PLA print, but as my mini hates PLA its a really slow config
These are modified versions of the APX-24 parts to fit my pump kit.
Remix of simple hole cover that should be compatible with any AeroGarden product. Additional layers on the top of the cover (base of the print) completely block out the light, reducing the possibility of algae growth in the water…
Thickend the tube and made the fuse hole 0.5mm smaller
Just edited the desk part with threads for thicker desks. Dont forget the support arm, it's shorter.
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
A nice little storage spot for precious items like rings and things. Scalable. No supports. Very strong. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
5mm and 10mm spacers to clip onto a 1.5 inch pipe to keep filament rolls from moving around when storing them. This can be used with the Ultimate Filament Dry Box. In the picture the black colored spacer is the original.
I tried to use usb cable fixer on printables / thingiverse, but I could not make the cable through the hole.
The standard chain starts to sag and beat against the case over time, so I decided to print myself a new one, however, I prefer the simplified drag chain termination and I would like to use the spool holder from @design8studio in the…
This is an adapter that allows you to attach the filament tube directly to the print head assembly without any connectors. It is recommended to use support normal when printing for the best surface finish. This drawing is applicable to…
I made the radius walls almost 3 times as thick as the original for a sturdier construction. Also, the holes didn't fit the rotary encoder that I had so make sure you measure those up before printing.
Just a 25mm base with a bit thicker walls to avoid the layer line you usually get when moving to the “hollow” layers of the base. Still contains a small cavity for a magnet. I'll come back and fill this out with other base sizes at a…
Vexanix did a great job on his design, but it wouldn't fit my phone with its case. I had an iPhone 12 Pro. It also fits my iPhone 16e. The brackets can hold a phone, with or without a case, up to 13.75mm thick and 149 mm tall. While I was…
31/08/2025 - // Update - Added Different Gasket/ Seal(s) for those who need or prefer different ones. Part Dimensions: Lid + Bottom - 4.75 in. Tall, 3 in Diameter Bottom - 4.35 in. Tall, 3 in. Diameter Lid - 0.75 in. Tall, 3in. Diameter…
I really liked the original design – definitely one of the best Jack-o’-Lantern models I’ve found so far! For my remix, I made the walls a bit thicker than the vase mode version to make it sturdier while still keeping it lightweight. I…
Stand for TV remotes. It has six slots; three thicker, three thinner. Print with PLA or PETG, no supports needed.
Custom made to fit my Warby Parker (Callum model), which use a significantly wider holderback width than the default. Graylynn 's remix of the original model does increase it to ~155mm, but it still comes a bit shorter for my…
This is a thick, heavy-duty protective case designed specifically for the iPhone 17 Pro , using official device dimensions for a precise fit. The case features a reinforced outer shell, strong perimeter bumper, and extra-thick walls to…
M10 Mount with thicker wall for thread
A letter holder with 3 dividers and a functional Skadis front, with a 2mm thicker bottom plate so you can put on slightly heavier things and have less chance of sagging.
Low-Profile Hold-Down Clamp – Digital File (STL & 3MF) Upgrade your laser engraving setup with this low-profile hold-down clamp, designed to securely elevate your material above the laser bed. By lifting the stock, this clamp helps…
Non era adatto lo spessore per il salisendi così ho deciso di progettarlo e stamparmelo da me.
Updated April 24, 2026 What's new More durability with thicker walls (2 walls) Completely redesigned geometry for cleaner file Updated lid now matches the shape of the container Printing Tips 3 Walls Save filament: 0 Top/bottom layers 0…
I needed an adapter for my Dewalt DW734 Thickness Planer to work with my Festool CT26 with the CT CYCLONE large particle debris separator. I couldn't find one so I made one, in two parts. Body and an o-ring. Main Body Printed in PETG 15%…
This is a riser/spacer for the bottom of the vacuum near the roller to replace the stock thin one with a thicker one to create more space/less resistance on the roller. I made it because my belt on the roller kept slipping on thicker…
The back panel and foam of my Formbot kit had a different thickness (4.5mm) so I remixed the base pieces. If you need even more you can change the fusion parameter "height" to your desired thickness.
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: Yes Infill: 50%-60% Filament material: PLA Filament brand: esun Filament color: white/brown
This is a simple holder for my iGaging Electronic Thickness Gauge. It holds the gauge and the 5 other tips for the gauge. This model mounts to a Dowel rod with a diameter of 1-3/8" or 35mm. STEP file included if you want to change how its…
This model is compatible with the lego system.
This is quick remix of Thomas H 3D 's Blum hinge damper adapter. It has the default values of that model (5mm screws with a distance of 32mm) as that works perfectly with the IKEA Billy bookcase.
This attachment is modified to fit the pegboard on my Harbor Freight Yukon workbench which is a bit over 1/8" thick.
I printed with Signal White PETG from Prusament. Slightly revised Brace9's remake of czargb's filament grommet to be shorter so it can be mounted on a 18mm chipboard Drill hole is unchanged at ¾" or 18mm.
This is a simple lithophane calibration square designed to help dial in optimal wall thickness and light transmission for your printer, filament, and light source. The model transitions smoothly from 0.16 mm to 2.08 mm in 0.08 mm…
It's a corner hanger for a desk where you can hang your headphones It's made for a 18 mm of a thickness of your desk board, it's a most popular thickness of forniture boards :333
Description This is a 49.9ml (1.69oz) shot glass. With 6 walls it has a good weight on bottom so its very stable. Rounded corners for easy cleaning. Print at .12mm layer height for smooth finish. Shot glass in pictures was printed in…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
ired of messy cables? This organizer is designed to fit perfectly on 37mm thick desks. It provides a secure grip to manage your power cords and USB cables. For the tech enthusiasts, I’ve included CAE stress analysis screenshots in the…
Say goodbye to cable chaos! This holder is specifically designed for 35mm thick desks to keep your 3-way power strip secure and accessible. Print Settings: Material: PLA (PETG for more flexibility) Infill: 20% - 25% Layer Height: 0.2 mm…
Changes I made it able to support a 10mm thick drive (instead of 7mm). I also added fillets and chamfers just to kind of polish it a bit. On my way toward doing a make of this nice design by Scott Gibb, I also created this remix. I used…
10-inch Mini-Rack - Rail Shim - 1U I created this 3.5mm thick, 1U rail shim for a 10-inch mini-rack to allow mounting thinner steel blanking plates and brackets flush with thicker 3D-printed brackets and blank plates. Typically the metal…
Housing for Zigbee round thermometer - hydrometer (Tuya or HA) diameter 40mm, thickness 14mm for outdoor use Pouzdro pro Zigbee kulatý teploměr - hydrometr (Tuya nebo HA) průměr 40mm, tloušťka 14mm pro venkovní použití
A stylized rose with thick petals and a solid stem. Perfect as a gift
I just cloned the model and made the second one a little taller and wider in my slicer, then exported as a single STL, haha. The original's walls were too thin to print very well with my machine. This is only the 4mm variant. I also cut…
