226 models
This model was created by Amao chan over on thingyverse. Check out the original creator: https://www.thingiverse.com/amaochan or the original post: https://www.thingiverse.com/thing:6086143 This is just a reupload!
Stack your hats! Makes a great gift if someone you know needs to stack some hats! Printed with PLA.
I found a mag pouch holster thing I liked and redesigned it from scratch in Fusion 360. I wanted to be able to print it assembled so you would not need screws. I made two versions one clip on one belt-fed on Monday I'm getting my blue…
It's a quick (and surely not the best) remix because I needed access to the inner micro-sd-card-slot. its WIP so feel free to react because I need to be sure the dimensions that worked on my Neptune 4 Plus are fine for you too.
Needed a hook to hold the curtains/black out shades during the day
So I have recently purchased some garden stakes, and instead like a normal human being and using some wire to connect them, I have 3D printed the connectors. They are quite sturdy and do not move around at all on the stake. The main stake…
Since I use my California also as my daily driver, the fridge cannot stay open by it's gasspring. Not only will I get a heartattack when the lid slams shut (which will eventually happend during a trip). But it also puts to much stress on…
howdy! my first printable, hooray! hopefully important tl;dr stuff bolded for anyone who doesn't want to read my word mess. just a warning before we start. please ensure the material you use to print this does not react poorly with your…
Super simple print vaguely modelled off an original part for size and general layout. Works best in PETG. 10 minute print. No supports needed.
A rod from our 15 year old laundry rack broke. After first trying with duct tape I designed a part for it. This has now lasted for two years and hopefully for a few more. Diameters are 12.5 mm and 3 mm for the rods. I added the Fusion 360…
Cable management thingy can be screwed into walls, furniture, etc., or use double-sided tape. Print Settings Printer: Tronxy XY-2 PRO Rafts: No Supports: No Resolution: 0.16 Infill: 20% Filament: Hatchbox PLA White Notes: Very simple…
Have you, like me, broken the small plastic piece for the camera on your Raspberry Pi? Then I have a little glimmer of hope for you. Print this file multiple times on opposite sides of the print bed with 5mm/s and 100% infill. This is a…
This is a simple, adjustable clipping point designed to provide clear feedback during RC drift practice. It features a sturdy, bolt-down base and a reinforced arm that holds a free-swinging marker, allowing for contact without disrupting…
The Clicky thingy is a clicker fidget where it's possible to change the clicker mechanism. Different clicker mechanisms have different sound and feel. Some are quite loud, and ablit stiff, and others soft with a lower click sound. I've…
first play with tinkercad... this is what happened lol Category: Pets
Replacement part for all standing guitar stands
Made it myself as a test on how to 3dmodel print in place bearings. It turned out quite well when printing it with a 0.6mm nozzle.
Fully parametric cable, filament, hose grommet kinda thing for passing stuff through an enclosure, desk, worktop, or whatever. Adjust to your needs using Fusion 360 (which is free to makers!) >> Open f3d file >> Modify >> Change…
This model can spin and hold your drink!
I saw something similar on the internet so i made one. First versions did not interlock segments, this looks good. If you come up with a nice name for this, please let me know. What it does? It is a structure made of interlocking segments…
Description Works with Echo Show 8 V2 - adds 15 degree tilt and lifts screen a few mm … couldn't find a model with magnets to hold it in place so quickly created this. Print … Easy to print - PETG / PLA or whatever 0.24mm layer height 15%…
The cable thingies have arrived! These little guys will grab any cable mess you have around so you better watch out! No, really. This cable thingy can hold on to any standard EU AC power plug (or Europlug) and organize the cable that…
TL:DR: A simplification of the stage/platform thingy as seen in UK Monster Jam arena appearances. Designed for 1:64 toy trucks, and may be suitable for similar-sized alternatives from other brands. First of all, this isn't a true scale…
It's a keychain spinny fidget thingy. .stp file included. Enjoy!
Reuploaded, to share in printables. This is a remix uploaded on thingiverse.com by mji1983 with the original its based on by Tattoed1980 , download it there to show the support. As of today I got aproval from Tattoed1980 to share it…
My mom saw a cool hair styling tool and wanted one, but it was $75! So I made a version that's printable. The tool helps to direct and lift curly hair for styling. The top screws into the handle using a modeled-in M22 thread. It should…
I like the XIAO ESP32 , I really do. It's tiny and seems to be one of the more reliable at connecting to Wi-Fi networks. That fondness for the device suddenly dies when you need to press either of the onboard buttons. They are tiny! But…
I was sick of having cutlery soaking in water so I made this riser. It's meant to work with ORDNING Stainless Steel Cutlery Stand and the EKIPERA plate. It prevents drying cutlery to come into contact with excess drain water. Edit feb…
Couldn't find anything to fit my door knobs (schlage) nicely, so I made these two. One for the exterior door's knobs, and one for the bedroom door's knobs Category: Replacement Parts
it's a heart thingy i made for vd! one version has a billion triangles, the smooth version is a smaller file size. i made this because i love you!
Can't have enough Star Wars wall art
The labels kept falling out, so made this. I designed it to be printed with layer hight 0.24mm. 4 layers in total, so prints pretty fast. Don't exactly know how fast, but when i came back after 15'ish minutes, 6 of them were done.…
I can't believe nobody has made this yet. In an effort to go 2.5Gbe, I bought an MR46 used on eBay for about $270 (Dec 2023). Price was low due to not having a ceiling bracket. Problem solved. EDIT: Don't print in PLA. Fell off my ceiling…
Keeps your Nintendo Switch cardridges together. If it does not fit onto your print bed, try disabling skirt/brim or turn by 45° on z axis. Made with blender, original files:…
Lost the main brush "thingy", the part that connects the brush to the head, and had to make one.
I'm not 100% that this part will fit as my frame was bend back into shape after crash. Be carefull when installing it as clips are wery brittle. Send me feedback and i will fix the part. Use heat resistant filament.
The main lever support (part number Y63X80000, see photo) was missing or has fallen off my right shift lever, I don't know. The lever stopped working and no longer shifted to the larger rear sprockets. My Repair Thingy replaced the part…
I made this to see how the contest works here but feel free to print it and throw it in addition to your valentine gift
got into the ranger reject manga and decided to model up the transforming pistol sword thingy they use. Category: Props
Pajero Gen3 Gen4? MK3 2000-2006 speaker spacer and cup protector thingy It was designed for Axton 16.5cm speakers. I thinned it a bit, and added the splash shield like the OEM part has and then some holes for wires and water weeps This…
A quick trace of an image I found online, with some added 3D aspects of my own.
I purchased some BarkBuster plastics for my motorbike handlebars a year or two ago and noticed that they only supplied clamps for one of the two mounting points (each). I had a slow weekend recently and copied the original clamps in…
PRINT WITH BRIM
It is supposed to make rods on FLSUN QQ-S PRO printer jiggle less (idk how to call it), so it doesn't mess up printing quality (as I've read). You can adjust tention of the rubber bands by rotating the hooks 100% infill, that's all I…
This is a small keyring holder that will fit into the Steelcase brand Cubicle slatwall. It is modeled loosely off their discontinued part, with several minor changes to make it a stronger print. You will need to print this with support.…
The block from the vzbot repo didnt work for me, so slightly changed it. Category: 3D Printer Parts
Put your zip tie on as tight as you can. Put the things on as shown. Grab the loose end with pliers or vice grips. Squeeze. End result... a crazy tight zip tie on whatever. Scale as needed for different sized ties. Suitable for stopping…
a thingy to stop the rotating thing inside
first attempt at publishing. work in progress. need to redo ring but trying to stay as thin as possible.
I honestly just want to see if anyone can print it. And it looked kind of neat. So theres that! Print instructions Category: Sculptures Summary I honestly just want to see if anyone can print it. And it looked kind of neat. So theres that!
WORK IN PROGRESS - carry it on ! I dont have time to continue it but been seeing interest on reddit for something like this fun for controlling spotify, seeing notifications and calendar events at a glance without using your phone. been…
If you are like me, you base your table top models after you paint them. I find this helps get underneath and around the model, the brush does not interfere with your base or basing materials, and or want to create more eccentric bases…
you can use the sticky things or just drill it into the surface you need it on, try to leave as little space as you can between it and the surface because it kinda holds the grinder in place. if it looks like the grinder doesnt fit dont…
My Underwood Portable was missing these thingies, so I went to designing and testfitting until I've arrived at a Version that fit's nicely. If you need both, remember to mirror one! Please ignore the absolute mess that is my printers…
This is a replacemant for the rubber case that comes with the Nordic Thingy:91, an IoT prototyping platform. This hardcase leaves the ON/OFF switch as well as the connectors free. The presliced model is printed in PETG and tested on a…
this is a pain paint pallet trough thingy for very liquidy paint, its deep.
Arts and craft butterfly, use either caller wire, or pipe cleaner to tie together. or Glue together . Go nuts try anything post if you come up with something interesting you made with it .Enjoy Print Settings Printer Brand: RepRap…
This is a "hat" that fits over the top of the Lulzbot Taz Y axis motor mount that allows a 14 mm dia x 5mm thick x 5mm shaft 605zz bearing to fit on the upper portion of the shaft just above the belt mount. This project also includes a…
This is a downspout thingy whatchamacallit
I ordered a bunch of small thermometer / humidity meter displays from Aliexpress so I could use them to monitor humidity levels in my filament boxes. I decided I also wanted to measure the levels in my shop, since it's in the basement and…
Print in PETG at 0.2 layer height 25% infill 3 outer walls organic supports on bed only works great.
I have a very tight build where I assumed the wrong esc dimension but luckily there was enough space at FC height so i designed a riser that sits on soft mounting grommets, added a holder for rx and a sort of doughnut where i could route…
My brother in law broke his nubby for his cheapo Cabelas knife, and asked if I could make another. I did, and here it is. Version 2 is the one I printed. I forgot to tap the screw hole. Version 3 I tapped it with an M2 bolt, but didn't…
28mm Weight lifting bar plug. 57mm to train your grip. works well. 15% infill 2 walls 0.2mm is tough enough to lift 60kg(I haven't check more weight) thanks. Category: Sport & Outdoors
Upload and slice the .stl file in your slicer software and feel free to print it!
The ClickyThingy is a mechanical clicky fidget for people who love a loud and crisp click/snap sound. Can be used For Focus: Keeps your hands busy while working or studying. For Relaxation: Used as an anti-stress accessory with satisfying…
Designed around m3 bolts, i think i used 25mm long ones to assemble and it was a tight fit.
Compression Gate Valve Tool Thingy. I have a few of these older-style hot water, valves in my home. Sometimes theyre in re awkward or difficult-to-reach places and because they haven't been used for a while and are - HARD TO TURN :( I…
Fits perfectly for racks with 4mm bar thickness. Screw spacer to object. Zip tie rack to spacer. Print instructions Category: Outdoor & Garden Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: low…
Recently one of my faux wood blinds purchased from Home Depot had a cam roller (barrel) snap. I began looking at the dozen or so different ones on Thingiverse and could not find one that matched my units measurements. I remixed the one…
its a door stopper thats all nothing intresting.I use gyroid infill:25% and 3 walls if you have a 0.4mm nozzle resolution of 0.2mm is perfect it creates little steps for friction.I recommend using more brim for getting nice sharp corners…
That clip? that keeps cords neatly coiled. Don't know what exactly it's called. No support needed.
This is a Raspberry Pi Zero Cover for the MK3 that includes a mounting point for the Adafruit CSI/DSI cable extender. Note: since the cover will no longer flex, it is a bit trickier to get into place, you'll want to insert the top two…
NEW Version 2! We have a little whale cover for our bathtub spout to protect baby from hurting themselves if they bump their head on it. Problem is my fat fingers can't pull up the diverter knob anymore, so I made this quick simple thing…
I was having some trouble anticipating how my color transitions would come out with these 2 tone and 3 tone filaments, but it seemed every roll changes drastically in the direction the colors are spooled. So I came up with this thing so…
Fidget toy with spiraling balls moved by magnets. It is a print in place model, where you have to pause your printer to put the magnets and the balls in. Additional hardware: 3 x 4mm steel balls (can be found in 608 bearings) 3 x 6x3mm…
grapple hook (DONT USE IT TO CLIMB UNLESS YOU HAVE STRONG AND DURABLE FILAMENT)
2 sizes wind cups and arrow 2 different styles of arrow
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
This is a simple stand to bind a 92mm fan to two raspberry pis in Geekworm cases. It requires no supports to print. Needs 2-4 m4 nuts and bolts, and 3mm rubber feet as spacers for the pis.
Like it says on the tin, it's a candy dispenser with a print-in-place rotating drum. It's intended for mini-chocolate bars, but still works fine printed at 50% for things the size of gumballs. The drum always resets so it should…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker I had a heap of spare 7mm stainless steel balls from spare…
My second hand SK280's original sinker plate rubber wheel broke, so I whipped up a quick replacement part, and printed it in eSUN TPU-95A , and it works so far. Let me know if you have any issues with the model, and I'll try my best to…
I inherited two Empoli glass "genie" bottles and bought a third recently. The plastic plugs that came with the bottles originally have all warped over time. I did some hunting and was not able to find a replacement available to purchase,…
It fits a tiny OLED and an LED strip. Use it to display whatever you can think of. Used with an LED strip, 0,96" OLED and a Wemos D1 mini. I've got it connected to Tibber(electricity company) API to display current energy price and…
This is a 90* fan attachment I made for myself but I uploaded it incase anyone needs to use it.
I got tired of the suction cups failing on my cat hammock and traumatizing my poor cat so I made a version to be screwed in to the window frame instead. I just used drywall screws. 22mm wide but here's the thingiverse file if you want to…
The thing slides into a steel tube of shelving for securely fastening it to the wall so it won't tip over. Following dimensions of steel tube: Width: ~26 mm Depth: ~45 mm Made for a M6 bolt with a hollow anchor for a plaster wall.
This is a meme from 5th grade that I designed in tinkercad. Try and guess what animal it is. I really don't know.
description? why are you looking at this? this probably means nothing to you atm. move on, you couldnt make this bc u have no idea what it is.
Custom Headrest Mount – Replacement for TFN BLOOM (TFN-HS-BT450BK) My TFN BLOOM (TFN-HS-BT450BK) broke after a year of use, so I designed my own headrest mount as a replacement. Important: Don't forget to separate the model before…
I wanted to bend a flash diffusor to test the really cool extremely cheap but really decent quality microscope lens macro tube create by thenickdue . 5 minutes in Fusion360 and one hour to print later… Light from above the subject! This…
Print it however you like i did it vertically but horizontally will be better but it will need more support. I print it on raft because for some reason petg supports stuck for good on the buildplate and raft is easier to remove. Filament…
A part that joins the frame sections of a dring rack. The frame rods are approximately 6mm diameter. I printed in PLA but other matrials may suit, even a stiff flex material might work. Print with the top down, basically legs pointing up.
The Creality nozzle declogger is a great tool that's available for very little money. The idea is that you poke this thing into a heated nozzle and boom, it declogs things. Unfortunately it doesn't come with a cover or a sheath or any…
![Foldable Wall Hook (Print in Place) with Snap When Retracted [Remix] by mji1983 on thingyverse](https://media.printables.com/media/prints/488549/images/3987065_8dead286-f540-4a79-bcb5-fdca98ef1f85/asdasdasda.png)
