24 models
Because I wanted to be about to chain the arm segments together via 2 arms > 1 arm > 2 arms > etc. I created a threadless arm to let the bolts pass through and let me chain these infinitely without ending up with some joints having two…
This unique soap dispenser was designed to work with a Natural Wunderz disposable soap pump I had. The threadless design should allow for easier adapting to different pumps. The internal space was designed for ease of printing and the…
I create a threadless base. It's easier for a one-year-old Print it in one or two pieces. Same setting as the original.
Update 9 Jan 2020: Thanks to zachariazh for pointing out that you can pay nearly 20€ for what is basically the same exact thing from Extralite , the Italian manufacturer of super lightweight weight weenie parts. The only thing you don't…
Threadless Saw Guide for Steerer Forks This 3D-printable tool is designed to assist in shortening bicycle steerer tubes—whether steel, aluminum, or carbon —inspired by professional cutting guides like the Park Tool SG-6. It provides an…
I used Scotch-Brite non-scratch scour pads as my filter medium, but sponge or some other similar material should work too. The attached photos show the assembly steps. If you find that you need a tolerance in-between what's provided, use…
I remixed my nuts so that there is no thread and it can be cut as you secure it to the fastener.
Hello! UPDATE 1 - 16.7.25 → I've replaced the carbon shim for a new version with only 1.8mm width compatible with a parktool carbon saw blade. I've drawn up a saw guide to shorten the carbon/steel/aluminium steerer tube of your bike!…
Various sized Headset spacers for nearly any application
A centered light holder for threadless (A-head) stems. Small print and an extremely simple attachment system. The holder is attached with a single piece of bungee cord that keeps both the light and the holder in place. The grooved version…
Remix of https://www.thingiverse.com/thing:4728452/files for Woom 6 headset (in my Woom 6 inner tube diameter was smaller, so I have redesigned the inner part). I've uses the "outer_collar" from the original project. Works nicely with…
Universal HEXAGONAL threadless container was designed for medicines, but use it for anything you want :) . The lid is designed so that it will always be exactly aligned with the edges of the base. I made 2 versions : Beveled (marked B in…
Threadless stem model. 1.125" steerer clamp, 31.8 mm handlebar clamp. I think it's threaded for 5 mm bolts on the clamp, & 4 mm bolts on the faceplate. Absolutely unacceptable for 3D printing. This will certainly break. A ton of torque is…
This is a 3D Printable Pure Nylon (no fibers) MacRide (or Mac Ride) Seat Headset Spacer model for 1-1/8 steer tube. Preferred thicknesses are 12.5mm & 20mm. Printed in Easy PA, 100% infill, zero supports, 3+ walls. Save yourself 22$ USD…
This is a set of 3D shapes to make sockets for 3mm machine screws. Lengths are 5mm, 10mm, 15mm and 20mm. You can import these in your 3D design to use as Boolean Cutters or add as Shapes to PrusaSlicer 2.4 (or newer) to use as Negative…
IMPORTANT: You will either need to add your own threads or undersize the print so the hole of the nut is smaller than the threads. That way it can self tap when screwed on. --------- If you need a nut for any type of pipe this will work…
Shim that adapts the much more common 1.125" (1 1/8") threadless stems to clamp on to 1" steerers. Cut down to match the height of your stem, or if smaller, make it the largest percentage below 100% possible. It would be much better to…
I removed the threads for the jar.
Inspiration EVT makes loads of great tools. Here is one such tool . Here is a video of it in use: Improvements over original I added a flange to the end to prevent it from falling through the stack of spacers & stem. Rev 2 Improved…
Removed the threads from the bottom jar.
Made this threadless nut with a 4.8mm hole and a 35mm base to hold up a blastic cover above my feet in my Holden Crewman Category: 3D Printing
https://cad.onshape.com/documents/6278a18925f0b0442de53e49/w/55678751a0e55e20ceb31045/e/73a41f8f28670a98b493425b?renderMode=0&uiState=68b31797391bb0c23a19770a
I found that the threaded shaft piece for the model didn't print well for me, and got stuck when trying to screw in the other pieces, so I designed a threadless version. The diameter of the shaft is designed so that it will fit with the…
Quick test of a threadless leadscrew concept for another project. Made from parts I had on hand to fit a 2.5" guide post. Printed with 0.4 nozzle, 4 walls, PETG. Materials required: 21x15x4 roller bearings M8 flat head cap screws Rod or…
