Counting matching models…
Want a commercial license to sell my prints? Join as a member to my Patreon https://www.patreon.com/c/Salvadori3DArtworks or my Thangs https://thangs.com/designer/Salvadori3D Thrilled to introduce my newest flexi model - this adorable…
A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30…
Cute articulated Dachshunds from https://www.thingiverse.com/coyotelc 3 lengths available from short to super long. Print-in-place. If your printer can do fairly decent overhangs, then supports are not necessary. If you like this model,…
Minecraft sword converted into a toothpaste or cream squeezer. Choose from 12 variants: four styles with either flat or pixelated texture top, original or smoothed corners/edges, each in three slit thickness options: 1mm, 1.5mm or 2mm.…
A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…
Want a commercial license to sell my prints? Join as a member to my Patreon https://www.patreon.com/c/Salvadori3DArtworks or my Thangs https://thangs.com/designer/Salvadori3D Introducing my latest creation—a lovable little pup that’s sure…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of countersunk screws with Phillips drive according to ISO 724 , ranging in sizes from M2.5 to M10, each available in lengths of 10 mm, 16 mm, 20…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
A print in place model of a sausage dog with a keychain loop. Watch the sausage dog dangle from a keyring! The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down…
Printing instructions Deathstroke comes in two pieces: a main bust part, and a base part, to be printed separately. FDM This one is an easy one on FDM printers. No supports required for either part! Resin As usual this one comes…
Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Hex screws according to ISO, ranging in sizes from M5 to M20, each available in lengths of 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40…
These are lego compatible technic bricks. The models here are only a selection for convenience. All length sizes can be configured on the Perfect Printable Bricks website . If these don't fit quite right with your legos you can fix that…
Print on Prusa MMU Everybody needs a Hearthstone. Stone Filament: https://smile.amazon.com/ZIRO-Printer-Filament-1-75mm-Marble/dp/B01IIAC2MW/ref=sr_1_2?ie=UTF8&qid=1521210609&sr=8-2&keywords=ziro+pla&sa-no-redirect=1 Teal Blue Filament:…
Circle of fifths with template highlighting major and minor chord progressions
➡️ Check out also mega long millipede Info: for those who likes it long in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws with Ribbed Socket head according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm,…
Like the original supplied, my model has an end-stop in the flange to prevent it from falling off due to turning too far. I have completely redesigned this holder, which has allowed me to create different lengths and refine the mesh…
I absolutely love that Josef Prusa includes spare hardware with his products. To date, I have built 3x Prusa MK3 printers, 3x MMU2 units, and then upgraded them all to 'S' which has left me with a ton of various M3 screws. I recently…
F32H32. Is smaller than osVAC-original. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
A few lengths of simple under-substrate cave that your fish can explore and you can watch them in since this goes against the front glass. Substrates and plants can be put all around it and in the center hollow. Just keep the tunnel…
This is a slim, simlpe Player Board for Oathsworn: Into the Deepwood. It keeps cards, cubes, tokens and animus in place. There are two versions: One with slots for tokens and one without. I prefer a clean design without token slots.…
EN Bullet Journal (also known as Bujo) is a mindfulness exercise designed as a productivity system. It is a method of personal organization developed by digital designer Ryder Carroll. This system helps calm the mind, organize thoughts,…
V 1.1 28. Feb. 2024: The katana has been extracted into a new set to meet the new license requirements V1.0, 26. Jan. 2024: first release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is…
Print one-offs as needed or use the included batch sets to print either: 20 regular zip ties (~170mm length) 16 long zip ties (~198mm length) 2 longer and 1 longest zip ties (~252mm x2, ~276mm x1) Note: all models and batches assume a…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Knurled Thumb Screws, ranging in sizes from M2.5 to M30, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm, 60 mm, 70 mm,…
Update 2022-01-16 Making Of Video with FX: Parts for my Death Star Bay 327 Diorama. I build this to show my Star Wars Spaceship Models in the right place. The base case is made from 10mm waterproof plywood. Lighted Spacedoor ring i cut…
This is a custom terrain pack for the boardgame Oathsworn. I gathered a bunch of existing objects (thanks to the awesome designers!!), scaled them appropriately and put them on matching hex bases. I felt like treestumps and ruins look…
These are lego compatible beams. The models here are the most common for convenience. All lengths can be configured on the Perfect Printable Bricks website . If these don't quite fit right with your bricks you can fix that by changing the…
I integrated a slip ring into M32H32. Ich habe in den M32H32 einen Drehring eingebaut. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis…
The design in question is for an extension or add-on accessory for a caliper, known as a radius finder . This tool is specifically engineered to measure circumferences that are beyond the reach of the caliper's existing jaws, due to their…
A print in place model of a sausage dog without supports. The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down depending on your requirements and imagination! The…
I created 3 conjoined katana sheaths to replicate the iconic ones used by Zoro in One Piece for the Dummy 13 figure. For more Dummy 13 and One Piece related designs, please look at my other models. I hope you enjoy my designs! :)
So many people have suggested these masks would be great for Paint ball and or airsoft ; ) I quite agree, so what better than one with a little attitude. Another evening of trialling modeling free hand, which I'm starting to really enjoy…
A basic chain intended as a keychain fob but also just fun to play with. Recommended: Print with 6+ walls to give it some weight. It makes it feel much nicer. Make sure your dimensions and elephant-foot compensation are decently tuned.…
Starwars Deathstar nigh lamp with RGB LED. There is no hole in the Deathstar for the 8mm LED just in case you want to use the model somehow different or put the LED somewhere else. Just drill the 8mm hole ;)
Printing instructions STL is oriented correctly No support required Minimum bed size at current scale = 160mm x 160mm (V0 owner will have to scale down) For added rigidity, use 4 perimeters, 40% infill About 1h print (on a Voron), 22g of…
These are 40x40mm, 40x20mm and 20x20mm V-Slot Linear Rails. I am working on a project to make a perfect scale model of my Ender 3 Pro, I figured this might be a useful model unto itself. Each rail is uploaded in the following lengths:…
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
Replica of the box from Hearthstone. If you add hinges it can be used as an extremely handsome container. The photos shows the prop after the printed pieces have been glued together, seams filled, sanded, and painted. We filmed a video on…
While the provided insert for the tokens is above and beyond what has been provided with other games, I still felt that there was some wasted space beneath the tokens. In addition I felt that trying to fit the tiles beneath the tokens…
just insert wick, snap together, i recommend you use a clamp to hold together, place upside down (wick facing down) pour candlewax into hole Sell my prints commercially by joining my Patreon Join my Patreon to gain access and commercial…
This is a set of RPG dice. Its meant for printing master models, on high resolution printers to make molds off, for resin casting. But they also can be printed in larger scale as decoratives. They're called Elizabeths Dice, because…
Another awesome model from Pepakura.com Unfortunately there was no reference to the original modeller, so no credit available. Please note the sizing will need to be checked to suit your needs and since I have upgraded to a Crealty CR-10…
DeathStroke Inspired Helmet Enjoy Category: 3D Printing
20cm mech, articulated For PERSONAL USE For commercial license , subscribe to Patreon 7$ https://www.patreon.com/c/KmechToys
A collection of Headless Hex screws according to ISO 4026 (DIN 913), ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75…
Introducing the Deathstar twist fidget, remixed from the original model by tato_713 found here https://www.printables.com/model/57266-death-star-scaled-one-in-two-million A huge thank you to Tato_713 for allowing me the use of his…
Print 1x handle and 1x shaft, with length of your choice, and glue them in place. Print shaft with a relatively stiff material. PLA, PLA+, PLA-CF, PETG-CF and PC-CF. Do not use PETG, ABS, ASA, and Nylon, they either fail to maintain…
A collection of Headless Slotted screws according to ISO 724 , ranging in sizes from M2 to M12, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75 mm, 80…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A comprehensive collection of Cylindrical / Parallel Dowel Pins according to ISO 2338 , ranging in diameters from M0.8 up to M30 . Each size is available in a…
To wear it on keys just scale it down to like 25-30% in slicer Updated version: V2: The ring is pushed more down into that model so it won't break so easily V3: The hole for the key ring is directly inside the hearthstone itself so there…
Articulated slugs from https://www.thingiverse.com/mcsim/designs 3 lengths available from short to super long. Print in place. No supports required. Individual sections are also available for remixes; i.e. head, body, tail. If you like…
Fortnite DeathStroke Inspired Sword Enjoy I don't mind if you make and sell my models that's fine, But this can Not be tolerated. If you have a etsy account please leave some negative feedback on this guy.…
🇺🇸 Welcome to Washington D.C.! In 2020, MiniWorld3D founder Dany Sánchez visited Washington D.C. and became inspired to recreate the National Mall for the MiniWorld3D collection. Here is the first one, the National Museum of Natural…
I recommend to print both bowls with the flat side down. You may need to sand the posts on the “top disc and posts” STL because they will probably be a tight fit. I modeled the magsafe charger plate to fit this one: https://a.co/d/8yQnzZa
I created a years worth of fun hair accessories for something new each month. Many are big enough for a large bun but several are smaller for a small ½ bun or for use as a barrette instead of bun holder. All files should be printed at…
Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Headless Torx screws according to ISO 724 , ranging in sizes from M3 to M16, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25…
Stone and Grass Paths - Remixed PlayTile, compatible with StageTop 3D Printed Gaming Tables. They have a 1 inch grid for D&D, but also have versions without the grid lines. All tiles are StageTop quarter tiles (4" x 4") and tested with…
Print settings are up to you, there are no special settings needed. They are designed to not require supports if you print with the long part of the body facing up. Print on a textured bed as that surface will be the front of the VF. Each…
BOM: Printed with ROSA3D High Speed PLA Gray Need a quick fix to hang a small picture frame, a thermostat, or a lightweight shelf? These printable expansion anchors are designed for small household tasks. Designed specifically for a 6mm…
Component replacement for Lord of the Rings: Journeys in Middle-Earth: Shadowed Paths expansion. File names say how many copies are needed for each. Nest Web and Nest Base are glued together afterwards. I added some webbing on the eggs…
I really liked both of these designs and wanted to combine them so that you could still slot cards underneath the player board and while also using as little filament as possible. I don't really know true 3d modeling design but I do know…
I remixed the great tray that Jakob Fromm made to add token symbols to show where they all go, as well as modeling the Oathsworn logo into the lid. The print pictured was printed in PETG at 2.0 quality.
When assembling in to the bottom I put some of my failed castings, some rusty washers and nuts for he weight, and sealed with the lid (maybie sand would better). After that simply glue together, I used a gluegun for that. I printed the…
Thanks Armand7734 and JMVent. I created this model because the monsters' miniatures of Oathsworn didn't fit in the models previously uploaded here. I made two versions, one with a hole in the center to save on filament and another one…
Note: This is currently a prototype. Print at your own risk while I sort out everything. If you do print it, I would love feedback to improve this further. Supports SleeveKings sleeves or smaller Magnet Size (optional): 8x1mm These have…
Player dashboard for Oathsworn companions. Each of the 2 base versions comes again in 2 versions, one for sleeved cards (sleeves that come with the game), the other for unsleeved cards. 12/14: added version without token bar
DeathStroke Arkham Knight Inspired Helmet Enjoy Category: 3D Printing
These little long badger dogs now complete with shiny glass eyes! :) 3 variations provided. They differ in length. All of them use 6mm glass eyes. Files are named accordingly. I printed all 3 of them without supports. Maybe use a brim if…
Knomi mount for the voron V0.2 stealthskirts.
Long GoPro thumb screw, for my floating case . A M5 60mm bolt with hex head needs to be inserted. Screw in an M5 nut to pull in the screw all the way. I added later shorter versions also for 30, 40, 50mm bolts. See download files. Print…
I printet with PLA 0.2 mm Leyerheight. The fit of the inner Cylinder is tight, so you need to sand one half a bit down to remove the upper part easely.
Different width Sram Level TLM/Ultimate bleed blocks (part.no. 11.5015.014.090). The bleed block comes with multiple sizes: * 12mm (default) - Use when bleeding brakes which afterwards will use new pads * 11mm - Use when bleeding brakes…
Thanks user Armand7734 on thingiverse for the excellent model! I just added a little triangle to act as an arrow of where the model is facing (when this is used with standees, might not be clear). Add a filament change command at the…
Simple yet effective motor wire protectors. The protectors sit on top of your motor wires and are secured to the arm of your quad with two zip ties. This saves weight and allows for easier maintenance than wire protectors which go all…
DeathStroke Black Ops inspired Helmet Enjoy Category: 3D Printing
Pulled the Raeshalare Deaths Whisper .obj from the game files and designed a stand for it. I split the bow in half for easier printing then glued after.
StarWars DEATHSTAR Light Up Book Ends! These are great bookends for my collections. Heavy enough to use with any books and glow with fitted area for standard tea light! 10" tall and 7" wide Enjoy and happy printing! Includes BOTH sides of…
2023.10.24: Updated Colors since they were completely out of order. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap…
This is set of sheaths (small, medium and large) for the Ikea 365+ 3-piece knife set. Printed on a CoreXY printer standing upright with a brim. In this orientation, no supports are needed, but it might not be viable on bedslinging…
Rumaged through my saved Pepakura folders and was once again inspired by Killonious great work on his helmets. Please note these files were freely uploaded to the internet via Pepakura.com. I can not take credit for these models, only the…
Organizer for Oathsworn tokens, coins and other things. Lids have names on them. Remix from https://www.thingiverse.com/thing:5446442
Deathstroke mask. You can scale the mask to fit your head. The file contains two parts for easier assembly.
This is a remix of https://www.thingiverse.com/thing:3272290 I made changes to the sizes so that the sheath fits flush on the knife and added other sheaths for other knifes. BeaverCraft wood carving sheaths. You should rotate the items in…
This is a simple 2D Wallart of the iconic Deathstar from Starwars. Its a very easy print with no special requirements.
3D Printable GT2 Pulleys. Proposed to Print in ABS Designed to be used with M3 Heat inserts and M3 grub screw.
If printed on edge no support is needed but bed attachment can be a challenge. Eye on top will accommodate a thin cord to allow easy removal and a way to secure the stick into the bag.
Forever cure your need to fidget with this gizmo! Assembly is simple and uses only 3D printed parts
AU $2 Trolley Token. Use the new / improved “easy out” paddle version. Or if that doesn't work on your style of trolley the original, in either coin (if you are a rules stickler) and paddle forms, all with keychain holes. For maximum…
DeathStroke Rebirth Inspired Helmet Enjoy Category: 3D Printing
Drains into sink, drip try is sloped to avoid pooling. Separates into 3 parts for easy cleaning (and printing). Supports are only required for the large overhanging beam (dish cloth holder) Can house up to 3 brushes, 3 sponges and a dish…
This is the same great design, but without the slots for the mini sheets. It also has a wider base for stability, a cutout to save materials, and sealed slot-bottoms so the sheets don't scratch my wood shelves. Print instructions PETG…
Help grow their brains! This model will help kids with the early stages of maths. Operations like addition, subtraction, and multiplication can be performed. You can print the blocks as one file and break off/trim the small connectors or…
![Tamiya TT01 wheel hexes [different widths]](https://media.printables.com/media/prints/425363/images/3518554_bf45835a-4fb6-46ab-9f83-35d3528e8070/20220117_114136.jpg)
