P
Printablescalvindonger
Finger Chopsticks
Hi everyone this is a finger chopstick I made. It has offset teeth for better grip of small objects.
- Downloads
- 11,853
- Likes
- 1,192
- Rating
- 4.95
Search results: ticks
Counting matching models…
P
Printablesfuchsr
Customized Sanding Sticks with Labels
Customized version of https://www.thingiverse.com/thing:2404850 , with added labels on top, to show the grit of sandpaper used. They go from 80 to 3000. If your sandpaper is a different grit, there's a blank top template provided. With…
- Downloads
- 11,825
- Likes
- 5,090
- Rating
- 4.9
P
Printablesrolli-on-fire
Snack Gripper - ergonomic snacking tongs/sticks
When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…
- Downloads
- 4,483
- Likes
- 981
- Rating
- 4.87
P
PrintablesBalulo3Dmaker
chinese chopsticks clip
A simple yet elegant chopstick clip. Keeps chopsticks aligned and secure before, during, and after use. A discreet acces
- Downloads
- 3,481
- Likes
- 1,254
- Rating
- 4.63
P
PrintablesMarkus
Finger Chopsticks - Stick to the finger mod
I like the Finger Chopsticks from @MrDaedelus but they often slip from my fingers. It's also not possible to strech the chopsticks so i made a modded version. Normal: Diameter of the finger rings is around 22mm or 0.9 Wurstfinger. Small:…
- Downloads
- 3,042
- Likes
- 246
- Rating
- 4.76
P
PrintablesMichael
Chopsticks Clamp
I saw something like this at a restaurant and was able to make a similiar item for use at home. The print works well out of PLA filament and the fun colors are great for kids. Print time is about 8 minutes Of all the utensil holders I've…
- Downloads
- 3,006
- Likes
- 953
- Rating
- 4.7
P
Printablesfifindr
Snack Finger Chopsticks
Enjoy snacking while keeping your hands clean with the Snack Finger Chopsticks ! Perfect for gaming, working, or just enjoying your favorite snacks without the mess. These lightweight, ergonomic chopsticks allow you to grab chips,…
- Downloads
- 2,806
- Likes
- 816
- Rating
- 4.97
P
PrintablesJackson
USB box V2 10 sticks
This is version two of my usb box. This is a box for storing usb sticks. I designed this new version to replace my old version with a better one. I use it to store my OS installers. It's a must have for anyone in system building or system…
- Downloads
- 1,982
- Likes
- 224
- Rating
- 4.95
P
PrintablesMrDaedalus
Finger Chopsticks - Updated
Made the finger holds a little more robust. V2 changes: changed teeth at the end of stick.
- Downloads
- 1,759
- Likes
- 156
- Rating
- 4.97
P
PrintablesJoker_G
Sidestick Grip for Virpil Thrustmaster VKB Joysticks
Don't forget to like and comment. I want a joystick grip that looks cool and feels like it's the real deal. Voilà This joystick grip has been inspired by the original sidestick, which is installed in Airbus airliners. Based on this…
- Downloads
- 1,713
- Likes
- 77
- Rating
- 0
P
PrintablesFabianMbaso
Finger chopsticks
Finger Chopsticks. Category: Kitchen & Dining
- Downloads
- 1,501
- Likes
- 117
- Rating
- 5
P
PrintablesXaasta
Xbox Drone Controller Sticks
Sticks to put on your Xbox controller to make it feel more like a drone controller.
- Downloads
- 1,410
- Likes
- 157
- Rating
- 4.89
P
PrintablesQuatro
Legion go thumbsticks
Introducing custom 3D printed thumbsticks designed exclusively for the Legion Go handheld! Elevate your gaming experience with these meticulously crafted thumbsticks tailored to enhance comfort, control, and precision during gameplay.…
- Downloads
- 1,356
- Likes
- 52
- Rating
- 0
P
PrintablesGeert Bevin
Wearable Chopsticks with Sleeve
Inspired by Snactiv ( https://snactiv.life ), these are wearable chopsticks that allow you to snack without getting your fingers dirty. Perfect for when you're working, gaming, chilling on your phone, ... A sleeve is included to keep the…
- Downloads
- 1,321
- Likes
- 168
- Rating
- 4.86
P
Printableskrisvda
Triple & quadruple gravity broom holder + gear for smaller diameter broom sticks
A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…
- Downloads
- 1,224
- Likes
- 160
- Rating
- 4.81
P
PrintablesRob5251
Sanding Stick Screws (Bigger) for fuchsr's sanding sticks
Remix of the sanding stick screws for the Customized Sanding Sticks by fuchsr Customized Sanding Sticks with Labels by fuchsr | Download free STL model | Printables.com Increased the height of the knobs from 3mm to 7mm and added small…
- Downloads
- 1,190
- Likes
- 147
- Rating
- 4.93
P
PrintablesFormFutura B.V.
Ribbed Glue Gun Sticks
Introduction You have a little bit of filament left so these Ribbed Sticks can be used for fixing and glueing your other projects. To prevent wasting all the small bits and pieces. The ridges make sure your glue gun can grip the stick.…
- Downloads
- 1,113
- Likes
- 680
- Rating
- 5
P
PrintablesMerganMcFergan
Kid's Drum Sticks
My daughter’s set of tiny toy instruments came with drumsticks sized for adults. Fortunately, the formidable forces of fabrication can fix that. Here is a set of drum sticks designed for little hands. Hopefully this helps your little…
- Downloads
- 1,071
- Likes
- 77
- Rating
- 4.6
P
PrintablesHenry Crete
Bowl with chopsticks Hair piece
Little Bowl to go in your hair
- Downloads
- 1,031
- Likes
- 1,039
- Rating
- 4.93
P
Printablesfirstgizmo
Sanding Sticks with Labels
This sanding stick takes strips of sandpaper and holds them firmly in place while using. It also comes with customized plates showing the used grain size. Printing: Print as you desire. 0.4 and 0.6 nozzles worked fine for me. 0.2…
- Downloads
- 1,008
- Likes
- 243
- Rating
- 4.86
P
PrintablesJordan Husney
Kids' Chopsticks / 筷子 / 箸 Trainer
Model is fully parametric, download the .f3d file to adjust and size for any pair of chopsticks. Recommended to print in PETG (or PA if you've got it), model oriented on its side so the fibers run through through spring component for…
- Downloads
- 996
- Likes
- 388
- Rating
- 4.83
P
PrintablesBerlinCoding
Snacksticks
You like to eat snacks while gaming or coding, but you are annoyed about getting a filthy keyboard, mouse or gamepad? Then this little tool will help to keep your hands clean. Yes it’s not a new idea … originally it’s inspired by snactiv,…
- Downloads
- 977
- Likes
- 162
- Rating
- 4.84
P
PrintablesGiskardReventlov
Steam Deck lightweight front cover - protects joysticks and screen
I needed a simple and lightweight front cover to protect the joysticks and the screen when traveling light, so I made one. Two versions: partial cover and full front cover: Prints as a single piece in the P1P and X1C (and any larger…
- Downloads
- 963
- Likes
- 124
- Rating
- 5
P
PrintablesThe 3D Printing Warrant
Popsicle sticks
I did not make these files just sharing them on this platform. You can find the original files here: https://www.thingiverse.com/thing:2907072/files (3) Different sized craft sticks. Regular = 114x10x2 mm Mini = 63x10x2 mm Jumbo =…
- Downloads
- 919
- Likes
- 38
- Rating
- 5
P
Printablesfuchsr
Stand, pegboard holder and cutting guide for Sanding Sticks
Folks have created stands and cutting guides for my sanding sticks https://www.printables.com/model/22236/ but I wanted a version that integrates the cutting guide into the stand. So here it is. I also include a version for standard US…
- Downloads
- 881
- Likes
- 173
- Rating
- 5
P
Printablesprntmkr
Tick Removal Tool – Remove ticks fast & easy!
Intro A tiny, wallet-friendly 3D-printed tool that helps you remove ticks quickly and safely — without squeezing them and increasing the risk of infection. This compact design acts like tiny tweezers to grip ticks close to the skin and…
- Downloads
- 823
- Likes
- 152
- Rating
- 4.92
P
PrintablesSirJohn2024
USB sticks, memory cards and caps holder
A remix of "USB SD and MicroSD holder for wide USB sticks" by Lalo_Solo ( https://www.thingiverse.com/thing:2637487 ), with added tray for caps and other stuff.
- Downloads
- 771
- Likes
- 74
- Rating
- 5
P
PrintablesAlexandru C. Vernescu
Space Drum + sticks
Print the drum parts with support , Sticks without ;)
- Downloads
- 732
- Likes
- 233
- Rating
- 3
P
Printablesfonzy
LST sticks
sticks for low stress Training. easy to print with rounded edges to minimize injuries to your ladies different lengths and thicknesses ---------------------------------- Sticks für Low Stress Training. Leicht zu drucken und mit…
- Downloads
- 666
- Likes
- 108
- Rating
- 5
P
PrintablesLins
Gaming Chopsticks - Long & Sturdy
Hi. This is my gaming chopstick model. It's long, thick, strong, and grippy. I made it in Fusion 360. Thanks! I am new to 3D printing. My print profile is on Makerworld.com, but it contains 2 plates with 2 sizes, and I added a small .1mm…
- Downloads
- 664
- Likes
- 33
- Rating
- 5
P
Printablesdevlab
PS4 thumbsticks
This is a remix of thumbsticks for PS4. My son needed them to play Fortnite, and they seem to work well for him. The top parts of the thumbsticks are remixed from PS4 Thumbstick Mods by philbarrenger . Top parts have to be printed with…
- Downloads
- 645
- Likes
- 83
- Rating
- 5
P
PrintablesLuBi Tech
PS4 Controller Sticks for FPV Drone Simulator
If you don't have yet the real fpv controller you can start training in a flight simulator using the sticks and your ps 4 controller. It's not the perfect solution but it will do the works till you get a real controller. Print tips: no…
- Downloads
- 637
- Likes
- 28
- Rating
- 5
P
PrintablesSketch Me To
lollipop sticks & French Cleat Holder
This set of 3D printed lollipop sticks is designed as a simple, low-filament consumable for general stirring, mixing, and craft work around the workshop or hobby space. The sticks are intentionally basic, making them ideal for epoxy,…
- Downloads
- 634
- Likes
- 137
- Rating
- 5
P
PrintablesToyLab
Handy Chopsticks
Handy Chopsticks – Fun & Functional 3D Printed Sticks Handy Chopsticks are a fun and clever tool designed for gamers who don’t want to choose between eating and playing. Each stick ends with tiny hands that help you grab food easily…
- Downloads
- 602
- Likes
- 149
- Rating
- 4.67
P
PrintablesKempy
Hall Effect Joysticks For the Space Mouse
I feel that this is a major step up for the open source Space Mouse. The current potentiometer joysticks used have two main issues: They work by wiping a metal contact on a carbon track - the carbon track will eventually wear out. There…
- Downloads
- 597
- Likes
- 102
- Rating
- 5
P
PrintablesFoppemoa
Sanding Sticks, 10mm and 25mm versions
A remix of the sanding sticks and customized labels to be 10mm and 25mm wide. The photo shows the 10mm ones to the left, the original sanding stick in the middle and the 25mm versions to the right. They use the same printed screws as in…
- Downloads
- 594
- Likes
- 112
- Rating
- 4.63
P
PrintablesNix
Cutting guide for sanding sticks
Just a tool I made to get precisely sized strips of sand paper for the printable custom labeled sanding sticks
- Downloads
- 572
- Likes
- 136
- Rating
- 5
P
PrintablesZANXL
Fpv Drone piloting sticks for ps5 controller
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
- Downloads
- 565
- Likes
- 42
- Rating
- 3
P
PrintablesManuelM
Sushi Chopsticks w/helper
These chopsticks are designed especially for enjoying sushi, but they’re also great for other Asian dishes like ramen, dim sum, or pad thai. The built-in support makes them ideal for beginners or anyone looking for a more comfortable…
- Downloads
- 564
- Likes
- 64
- Rating
- 5
P
PrintablesSaddamCZ
Two-part Drumstick Holder (6–8 drumsticks)
A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing or any vertical tube between 20 and 45 mm. The inner diameter of the holder cup and ring is 7 cm (2 3/4"), so it can hold 6 to 8 drumsticks ( a smaller version for 4…
- Downloads
- 556
- Likes
- 69
- Rating
- 5
P
Printablesgskollnau
Chopsticks
Chopsticks for decoration. If you want to eat with them, first cover with food-safe varnish. Its possible, the sticks were infested with bacteria, if you do not.
- Downloads
- 539
- Likes
- 35
- Rating
- 5
P
PrintablesKempy
Smaller SpaceMouse with Hall Effect Joysticks, PCB Wiring and BALLS OF STEEL!
Having ball bearings running in metal sleeves results in a smooth action and a more compact SpaceMouse. Hall effect joysticks eliminate dead zones and enable much finer control. The only issue you need to be aware of is manufacturing…
- Downloads
- 531
- Likes
- 159
- Rating
- 5
P
PrintablesCaracolmaker
sushi chopsticks
In the slicer I remove the first milimeter from the bottom or to avoid putting supports. Print instructions In the slicer I remove the first milimeter from the bottom or to avoid putting supports.
- Downloads
- 509
- Likes
- 41
- Rating
- 5
P
Printablesflipmarley
Geodesic Dome hubs for popsicle sticks
This is for standard size popsicle sticks which I measured to be 113mm x 9.5mm x 2mm. Print a single hub to test the fit of your popsicle sticks and adjust the XY Size Compensation until the stick is snug, but not too difficult to fully…
- Downloads
- 509
- Likes
- 104
- Rating
- 4.71
P
PrintablesNebulaNoob
Team Rose Figurine Set: Amy, Cream, Big, and Sticks
Third set of Sonic figures based on Team Rose (and Sticks lol). Set inludes · Modern Amy · Cream and Cheese · Big · Sticks (STILL PAINTING, WILL UPDATE WHEN DONE) All my figurine and statue models will always and forever be free! If you…
- Downloads
- 495
- Likes
- 48
- Rating
- 5
P
PrintablesEthans prints
Drum sticks
Drum sticks which should be printed with stronger filliments to put up with use.
- Downloads
- 479
- Likes
- 25
- Rating
- 0
P
PrintablesJackson
USB box V2 5 sticks
If 10's to big here is a 5. This is version two of my usb box. This is a box for storing usb sticks. I designed this new version to replace my old version with a better one. I use it to store my OS installers. It's a must have for anyone…
- Downloads
- 478
- Likes
- 32
- Rating
- 5
P
Printables3D P Gone Wild
Gaming Chopsticks
I modeled these after some gaming chopsticks I saw and wanted to see if I could make something similar. These are not perfect by any means but they work. They are a little weak in the finger loops, but if you print with a higher infill it…
- Downloads
- 457
- Likes
- 40
- Rating
- 4.5
P
PrintablesAmanda Matthes
Playing card suit hair sticks
Needed a last-minute costume for an Alice-in-Wonderland party. These let me create a crazy hair style to go with a red and black suit. They are quite chunky. I scaled them down to be 19cm long and they still could have been skinnier.
- Downloads
- 457
- Likes
- 142
- Rating
- 5
P
PrintablesLalo_Solo
USB SD and MicroSD holder for wide USB sticks
This holder can allocate 8 wide USB sticks, 8 SD cards, and up to 15 MicroSD cards. Ideal for your desk, to keep your portable storage in a single place when you need them. It has holes to prevent from dust accumulation, and reduce a…
- Downloads
- 440
- Likes
- 63
- Rating
- 4.86
P
PrintablesLoboTheSequel
Xbox Thumbsticks
Xbox thumbstick extenders three heights 9.5mm, 14mm and 21mm. Both convex and concave versions.
- Downloads
- 421
- Likes
- 36
- Rating
- 5
P
PrintablesD3D
Truss Sticks and 2 Way Vertical Corner
More: https://www.prusaprinters.org/prints/47041-complete-truss-accessory-pack Truss can be printed with no supports, but an stl with custom supports is included. 0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill…
- Downloads
- 399
- Likes
- 59
- Rating
- 5
P
Printablessupercoolguineapig
mouse chopsticks
a way to not get your finger or mouse dirty
- Downloads
- 396
- Likes
- 68
- Rating
- 4.88
P
PrintablesLynola
finger chopsticks
Idea came from convention giveaways. Theirs was too small. Created this one for larger fingers.
- Downloads
- 396
- Likes
- 37
- Rating
- 5
P
PrintablesPRINTER
Contour duplicator with wooden ice sticks
Contour duplicator with wooden ice sticks Simple tool to use with wooden ice sticks 114 x 10 x 2 mm. Partlist: 2x ISO 4762 - cap screw - M3 x 12 2x ISO 10511 - self locking nut - M3 Model printed with: Prusament PETG prusa orange
- Downloads
- 388
- Likes
- 502
- Rating
- 5
P
PrintablesMadigan
Ultimate Snack Gripper Chopsticks
Features… Aerated handle with grip bumps for comfort, lightness, ease of handling and no-slip. Subtle, yet effective 3° bend at end of sticks for a solid grip on those snacks. Teeth at the very tip perfectly come together for picking up…
- Downloads
- 384
- Likes
- 55
- Rating
- 5
P
PrintablesRuvim Kub
Stand for cotton swabsticks and discs
Stand for cotton swabsticks and discs
- Downloads
- 372
- Likes
- 69
- Rating
- 5
P
Printablesmoebis
Chop Sticks and Case
Chop sticks and case was printed on Bambu X1 Carbon at 0.16mm layer height. I suggest printing the chop sticks in food safe material (I used wood PLA with a food safe varnish) at 100% infill. The case can be printed at 15% infill.
- Downloads
- 371
- Likes
- 27
- Rating
- 1
P
PrintablesThorin Oakenshield
Japanese Chopsticks holder
Chopsticks holder with Japanese symbols - Mount Fuji, Bonsai, Torii gate, Rising red sun, Katana holder You can print the relief in one color or in multi-color, I added g-code for multi-color printing You can find another Chopstick holder…
- Downloads
- 368
- Likes
- 180
- Rating
- 5
P
Printableszacharow.makes
Hexagonal Sushi Sticks Helpers
A small helpers for sushi sticks . They work with a premium sticks and cheap "to go" ones. Printing Notes Print in PETG (best flexibility) but PLA will work too. Try with auto supports in holes for sticks. Quick, simple, and practical…
- Downloads
- 365
- Likes
- 85
- Rating
- 4.6
P
PrintablesNico
Lenovo Legion Go Thumb Sticks - Various Sizes
I searched high and wide for a replacement stick for my Lenovo Legion Go that was both easy to print with minimal Supports and comfortable to use. While there are some decent options already out there, they weren't really what I was…
- Downloads
- 357
- Likes
- 21
- Rating
- 4.75
P
PrintablesGnomehenge Workshop
Kpop Demon Hunter Hair sticks
Simple hair sticks inspired by huntrix and saja boys logos. printed great in pla and petg. works well with single color printer. I paused and swaped colors for a few different versions of each. 1 version of saja boys, 2 versions of…
- Downloads
- 342
- Likes
- 74
- Rating
- 0
P
PrintablesWindy
Drum sticks holder & emergency key
This is a holder for 4 hickory drumsticks of size 5A (which is my favourite size), but it can also hold slightly thicker drumsticks for example 3A. And because I usually forget my drumkey, I included an emergency key. As it is a plastic…
- Downloads
- 341
- Likes
- 60
- Rating
- 5
P
PrintablesSolar3dp
mini hockey sticks right and left hand
mini hockey sticks right and left hand
- Downloads
- 339
- Likes
- 13
- Rating
- 0
P
PrintablesTatie Devouvres
Miniature 1/12° Candlesticks
A few simple candelsticks (modelled in Fusion 360 for my Christmas Book Nook)
- Downloads
- 338
- Likes
- 119
- Rating
- 5
P
Printablespiero menetti
Radiomaster TX16S gimbal and sticks protection NEW!
Protect gimbals and front sticks. New version with upper stick protection! Assembly the two parts with pressure, once in right position the upper part rotates freely. Insert the gimbal protection first, then rotate the other part: on the…
- Downloads
- 331
- Likes
- 29
- Rating
- 0
P
PrintablesODCA Props
Nightwing escrima sticks (Gotham Knights)
Newest addition to the bat family arsenal, Nightwing's escrima sticks, grom the game gotham knights this was based on a mix of concept art and some of the ripped game models concept art source here modeled this in as many pieces as i…
- Downloads
- 320
- Likes
- 73
- Rating
- 5
P
PrintablesNokedli
Gaming Chopsticks
This is an improved design of the Gaming Chopsticks. The model has been properly redesigned in CAD (the original has some artefacts and inaccuracies), while also adding several improvements. Changes include: - wider finger support for…
- Downloads
- 319
- Likes
- 25
- Rating
- 5
P
PrintablesRheeno
Fruchtzwerge selbstmach Eis - Sticks (Smilies)
Ein paar einfache “Fruchtzwerge-selbstmach-Eis-Sticks” im Smilie-Design. Da bei jeder Packung immer nur einer dabei ist, kann man immer Ersatz gebrauchen. Ich habe das Ganze mit Prusament PETG gedruckt, wegen der Lebensmittelechtheit und…
- Downloads
- 316
- Likes
- 21
- Rating
- 5
P
Printablesrbid
Seedlings/Small-Plant Support Rings (to be used with bamboo sticks)
I grow hot peppers, and when the seedlings go out from the propagator, they sometimes need some support, therefore this was the motivation to create ones. I can get for a cheap price bamboo sticks from various diameters (3.38mm, 4.00mm,…
- Downloads
- 316
- Likes
- 81
- Rating
- 5
P
Printablesmepi0011
Bathroom shelf organizer for lipsticks and other items
There are no special requirements for printing the model and it can be printed with PLA.
- Downloads
- 310
- Likes
- 66
- Rating
- 5
P
PrintablesXTB09X
XBOX accuracy thumbsticks
High accuracy thumb sticks improve game performance by 10% when playing various games
- Downloads
- 301
- Likes
- 20
- Rating
- 1
P
PrintablesSvanGool
Additional labels for Customized Sanding Sticks
This is an extension of the set introduced by Customized Sanding Sticks with Labels ( Thanks Fuchsr ! ). In order to make the set on the included photo you can e.g. purchase set(s) over here…
- Downloads
- 298
- Likes
- 76
- Rating
- 5
P
PrintablesOurAngryBadger
Extension Sticks for DJI Smart Controller
Print extension sticks for your DJI Smart Controller! Extra length = better accuracy when controlling drone or gimbal movements. These fit directly on top of your existing sticks, with a snug fit. Can be removed and put back on later for…
- Downloads
- 298
- Likes
- 27
- Rating
- 5
P
PrintablesSaddamCZ
Two-part Drumstick Holder (4 drumsticks)
A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing. The inner diameter of the holder cup and ring is 5 cm (2"), so it can hold 4 drumsticks ( a bigger version for 6–8 drumsticks is available here ). It clamps onto…
- Downloads
- 297
- Likes
- 50
- Rating
- 4.8
P
PrintablesEcholalia
Customizable Stickshift Keychain Fidget (Gyroscopic and Magnetic, .blend included)
This is a fidget that you can put on your key chain to add some personality, or keep as a standalone toy. It can be easily customized through your choice of the different provided STLs, or even further by using the provided blend file.…
- Downloads
- 296
- Likes
- 98
- Rating
- 5
P
PrintablesThump2010
Odin 2/Retroid Pocket 5 Thumb Sticks
I lost the thumb stick to my Odin 2 and didn't want to pay $10-$30 on etsy to buy a set so I designed my own and they worked out great. My sticks are 2mm taller than the original to give you a little extra control and for the taller ones…
- Downloads
- 292
- Likes
- 17
- Rating
- 5
P
Printablesbraga3dprint
Baby Yoda's Force-Fueled Chopsticks Holder
The Baby Yoda's Force-Fueled Chopsticks Rest is a must-have for any Star Wars fan. This model features the adorable character from The Mandalorian series using his force powers to hold up the chopsticks. It is a simple and functional…
- Downloads
- 290
- Likes
- 128
- Rating
- 0
P
PrintablesMiguelM
Broom Bracket for threaded broomsticks
The thread is set to fit 3/4" ACME (see pictures), wich is a standard broomstick thread at least in europe. The thread has been carefully set though a LOT of dimension iterations. A simple version is uploaded to edit. A 120º full bracket…
- Downloads
- 289
- Likes
- 91
- Rating
- 0
P
PrintablesBlueFalcon1066
Chopsticks
Wanted to see what I could come up with in 10 minutes on fusion. Not sure if they're food safe, but they can pick stuff up just like real chopsticks. I did 100% infill and printed them diagonally for max strength. Print Settings Printer…
- Downloads
- 288
- Likes
- 33
- Rating
- 0
P
Printablespixelconnect
Gridfinity Storage Boxes for USB-Sticks, SD and MicroSD cards, and Sony A7 batteries
Three storage boxes based on the Gridfinity 2x1 footprint for: 12× USB sticks 7× SD cards + 2× SD card cases + 8× MicroSD cards 2× Sony Alpha A7 batteries Drei Aufbewahrungsboxen auf Gridfinity 2x1 Basis für: 12x USB-Sticks 7x SD-Karten +…
- Downloads
- 287
- Likes
- 43
- Rating
- 5
P
Printablesjeepers01
Glue mixing applicator sticks for epoxy
Glue mixing applicator sticks for epoxy. Seven various glue applicator sticks for epoxy mixing and application. They are 60mm long but they can be scaled to any size required in your slicer software. Quick to print. Printed in PLA with no…
- Downloads
- 285
- Likes
- 34
- Rating
- 5
P
Printablesadsiemer
Simple Candle Sticks
Made these for my wife and thought I would share. There are three sizes. Using PrusaSlicer's variable layer height makes the parts look great and print in a few hours! small - 135mm medium - 170mm large - 205mm
- Downloads
- 280
- Likes
- 55
- Rating
- 5
P
PrintablesAL_3D
Halloween Cocktail Sticks
There are two versions of each design: one has the spike on the top and one on the bottom. (For useage on top or in the glass) The sticks are about 10 cm (~ 4 inch) long, let me know if you need a longer version. Print with 0.2 mm layer…
- Downloads
- 278
- Likes
- 79
- Rating
- 5
P
Printableslogicalplanet
Dragon Hair-Sticks
My wife challenged me to come up with some hair-sticks for her. This is what I thought was appropriate... I mean she is not a complete "dragon lady" but she still has time. Haha. Check out my other designs at… https://logicalplanet.com/…
- Downloads
- 278
- Likes
- 80
- Rating
- 0
P
Printablesrjorgenson
Sandpaper Cutting Template for Sanding Sticks
This is a template I made and printed to make cutting strips of sandpaper easier for these sanding sticks https://www.prusaprinters.org/prints/22236-customized-sanding-sticks-with-labels Height is 3mm but you can adjust the Z up or down…
- Downloads
- 276
- Likes
- 51
- Rating
- 5
P
PrintablesDarak
Holder for Customized Sanding Sticks with Labels
I designed this holder to hold both 100% scale sanding sticks and 122.3% scale sanding sticks, more on the 122.3% scale later, the holder will hold a total of 16 sanding sticks, the original size in the front, and the larger one in the…
- Downloads
- 274
- Likes
- 80
- Rating
- 5
P
PrintablesFrank
Chopsticks Holder
Chopsticks holder for kids. We got them at the restaurant and modeled one for the others kids. They work great. I printed in PETG. 100% infill and .15 layer height. They are suitable for chopsticks between 6.8 - 7.3 mm. But you can scale…
- Downloads
- 273
- Likes
- 34
- Rating
- 5
P
PrintablesBigTexPreach
DualSense Edge Extended Sticks
I have been playing with extended joystick caps for years, when i purchased the DualSense Edge i found the sticks to be just a tad to short so I made these. I am glad to alter them in any way folks would like if they don't care for this…
- Downloads
- 263
- Likes
- 18
- Rating
- 0
P
PrintablesMrPsycho1987
Popsicle Sticks + Stand (Make It Mini)
These models are replicas from the Make It Mini posicle set. You can make an endless supply of posicle sticks and stands, especially useful if you have the Make It Mini popsicle resin mould. On the left side of the pictures are the…
- Downloads
- 262
- Likes
- 60
- Rating
- 0
P
PrintablesKrail3D
Modular Desktop Organizer for Micro SD-Cards, SD-Cards and USB Sticks
I needed a way to store my Micro-SD and SD Cards, instead of having them laying around everywhere. After i finished the Card Organizer i thought i could add USB Stick Holders, too. You can either glue the Modules together or use a short…
- Downloads
- 257
- Likes
- 39
- Rating
- 5
P
Printablesm_collectable
Hockey Puck Phone Picture Card Stand Holder - Multiple Variants Heart Sticks Goalie Mask Engraved
Great for your hockey fan. Hold your phone, tablet, picture, photo, business card or even hockey card with these engraved hockey pucks. There are two groove widths: 15mm wide or 10mm wide. The larger one holds my iPhone 15 with case…
- Downloads
- 253
- Likes
- 24
- Rating
- 5
P
Printableste.3D
Chopsticks Trainer/Helper
a simple and quick to print chopstick trainer or helper for sticks around 6mm diameter. insert sticks from side with gap. best to print in PETG for flex and strength, a little support can be used for nice shaped holes, 2 perimeters should…
- Downloads
- 252
- Likes
- 20
- Rating
- 5
P
PrintablesPrintical
Geometric Cocktail Stirring Sticks
Print in different colors to use them as drink identification at parties! Use 0.3mm layer height
- Downloads
- 251
- Likes
- 71
- Rating
- 5
P
Printablesm00nd0gg
Larger Textured Odin 2 Thumbsticks
I printed these in clear PETG with two walls and 20% gyroid infill. They feel good and glow well!
- Downloads
- 250
- Likes
- 13
- Rating
- 0
P
Printablesdylan3dprint
Nightwing's Escrima Sticks
Nightwing's Escrima Stick from Batman Arkham City
- Downloads
- 249
- Likes
- 30
- Rating
- 0
P
Printablestimqui
Eccentric Thumbsticks for PS4 Controller
I've made several variations, let me know which suits you best. Based on your feedback I am ready to create additional variants. The main idea is that eccentric thumb position still works and could be better accesible (even for people…
- Downloads
- 249
- Likes
- 74
- Rating
- 3.67
P
Printablesbetaiv
Snack chopsticks
This chopsticks allow you to eat messy stuff without making your table dirty. PETG is preferable since PLA will eventually break.
- Downloads
- 248
- Likes
- 24
- Rating
- 5