Counting matching models…
update 2025/7 Easier to print, and fixed some minor issues. Improved version of cell phone holder ball mount base for VW Tiguan 2. Added a pair of bottom clip to prevent slipping and optimized ball position, makes it easier to access…
i used ironing on topsides, had it on peo plate ( yes it should have been a carbon pattern to be really sweet ) 0.2mm, 1st layer speed only 250mm/s2 because of peo-plate 15% infil ( gyroid, i wanted to avoid warp as muck as possible )
Tiguan Luggage Boot Cover Mounting
Trash (or storage) bin for VW Tiguan, may fit other cars as well. Installed in the rubber mesh at the passenger side, length of the mesh approximately 230mm. Made from two pieces, no need to glue them together, at least for my prints they…
This works on a Skoda Yeti/Octavia/Rapid/Superb or VW Tiguan. Instalado sin problema para sujetar el guarnecido bajo el capó de un Skoda Yeti, es común a otros modelos del grupo VW. Tried and tested on Yeti. the original part OE…
I had the instrument cluster speaker go out on my 2018 Tiguan. The speaker is what makes the blinkers click sounds and seatbelt dings and whatnot. In addition to not being able to hear alerts and the blinkers, the car will also disable…
Jedná se o remix modelu montáže držáku mobilního telefonu do VW Golf PLUS, Tiguan atd. Doplněno o verzi s 16 mm kuličkou.
Keine Ahnung, was sich Volkswagen dabei gedacht hat, aber die Lösungen, etwas zu verstauen, sind nicht gut durchdacht. Das Auto ist eine einzige Frauenhandtasche geworden. I have no idea what Volkswagen was thinking, but the storage…
Volkswagen Tiguan Allspace 2020 thrash can, print in vase mode with at least 0.8 mm external perimeters. I suggest printing with PETG, PLA could deform in the summer. I printed mine with 1mm nozzle 0.7mm layers from rPET. Print Settings…
Easy to print waistpaper basket for left and right front door for second generation Volkswagen Tiguan. It snugly fits in the rear part, leaving room for a bottle. Rounden inside corners make easy cleaning. Infill: 100% No support needed.
Latch for overhead sunglass holder in a 2021 tiguan; other years should work but I dont know what years are the same. I used ABS but PETG should work also. Detailed instructions can be found at:…
A flat projection of a 2020-2024 R Line Black Edition. Files are for a version with an eyelet for ornament hanging and without.
Ich habe eine passgenaue Spezialhalterung für den VW Tiguan 5n entwickelt, die die beiden werkseitig vorhandenen Schlitze oberhalb der Radioeinheit optimal nutzt. Die Halterung wird ohne Werkzeug einfach in die Schlitze eingesetzt und…
Printed with 5 walls
Universal seat (17 mm ball) for various car phone holders. Designed for installation in the upper card slot of the VW Tiguan. Reinforced design with a metal bolt at the base of the ball. Prints without supports. You will need: M4x20 screw…
VW trunk hook, Will suit Golf, Tiguan, Passat, Jetta. I used 90% infill with 0.2 layer height. Supports everywhere and also a brim. Printed face down (Shown in Pictures) Print time just over an hour. Enjoy - please post pictures if you…
This is a replacement end cap/slider pin for the retractable trunk/cargo cover (parcel shelf) of a Volkswagen Touran (2017, 5T model). The original parts tend to become brittle and break over time. Replacement of the whole Rolette is like…
This is a remix of DaGaLife's Tiguan wheel cap, for a VW Vanagon. Scaled up for a 56mm hole. The Vanagon's rear axle sticks out significantly past the wheel, so a tall cap is necessary to cover it. It holds OK by itself, but I added a…
Tiguan 2012 - Mophie phone mount. The mophie mount breaks easily - print and then reuse existing parts. Printed in asa/abs with supports. Print on it's side.
This keychain is based on the refined and versatile Volkswagen Tiguan 2017 , blending SUV practicality with VW style. Print with a 0.2 mm nozzle for finer detail. A perfect accessory for Tiguan owners and Volkswagen enthusiasts . Bring…
VW Tiguan 1 railing clip (N0200321) TPU A95 layer 0.2
A compact adapter for a phone holder, featuring a standard 17mm ball joint and designed to fit into the card slot. Tested on Volkswagen Tiguan 1 (facelift) I used PETG, 0.2mm layer, 40% infill and supports.
This is a small piece that fits over the power sunroof switch and prevents it from being operated. It is useful when a roof rack system is installed that doesn't have enough clearance for the sunroof to operate safely. I have designed…
Deutsch unten On long drives, I was always bothered by the wind blowing in my face from the vents. My eyes would get dry, and I wanted to turn the wind off, which wasn't possible. Every passenger I'd had to close the vents after a short…
32oz Hydroflask adapter for 2016 VW Tiguan Cupholder . I included a custom support from original model in 3mf with 0.2mm gap modified for: sparse infill, no top, and no perimeter (break away was trivially easy). Made in Polymaker ASA…
Holder for HS5 BS in Tiguan Category: Automotive
Speaker adapter for VW Tiguan 2 (front), compatible with VW mk5, Seat, Skoda (VAG with 20cm front speakers) I strongly recommend taping the top of the adapter with aluminum tape (see photo). This will protect the speaker from water coming…
I decided to use a cheap charger from one of the online portals and adapt it as a charger in a VW Tiguan 2. I bought myself a suitably long cable with angled plugs to complete the set. The original pocket lining must be removed. I printed…
This adapter fits into the cup holders of a 2025 Volkswagen Tiguan (North American Region) and accommodates a slim can of branded energy drinks (or equivalent 53mm can). Design features This has two alignment holes to fit around the…
Das Modell ist ein Ersatzteil eines Verschlissenen Hebels zur Verstellung der Lendenwirbelstütze und kompatibel zu 5G0 881 236 A 82V Das Original ist etwas schwächer von der Konstruktion. Die Toleranz ist nicht groß aber in meinem Fall…
While organizing my car I noticed that there were two holes in the floor that weren't utilized. I decided to create this mount to safely carry a 2.5 lb fire extinguisher I had. This is fitted into a 2023 Volkswagen Tiguan (North America).…
3d scanned the center console storage on a 2023 VW Tiguan as I couldn't find any 3d printed items for this model, only the 2025 and later. Remade it using 3ds max and exported to Bambu Studio. Note this also has the files for TPU inserts…
This mounts to the sunroof control area and physically blocks the controls when low profile roof bars are installed (such as the Thule Wingbar Edge ones), to prevent accidental operation that may damage the sunroof. It's designed to fit…
Ein Trenner um das Fach in der Tür zu unterteilen und die Warnweste an Ort und Stelle zu halten. Ich habe noch etwas Filz auf der Innenseite angeklebt - sitzt mit Druck und kann aber auch noch verschoben werden.
Magnetic Phone Mount that clips into the air vent of a VW Tiguan (2016-2026). A magnetic pad for your phone. Takes a single N52 disc 20x3 mm, glued into the recess on the back - so the magnet sits close to the phone and the grip is…
I had the instrument cluster speaker go out on my 2018 Tiguan. The speaker is what makes the blinkers click sounds and seatbelt dings and whatnot. In addition to not being able to hear alerts and the blinkers, the car will also disable…
This adapter fits into the cup holders of a 2025 Volkswagen Tiguan (North American Region) and accommodates a slim can of branded energy drinks (or equivalent 53mm can). Design features This has two alignment holes to fit around the…
Support en une seule partie pour Tiguan 2. Permet de poser un iPhone 12. Nécessite des supports ("tree" de préférence).
Easy to print Central object holder divider for second generation Volkswagen Tiguan. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15% Filament: Generic PLA or Generic PETG
Outside printed by TPU inside part printet by ASA or PETG or ABS. + 6pcs countersunk head screw M3/10mm
Lost the plastic part that hold de trunk floor cover string in place. Designed something that fits the OEM holes and string. Needs M4 or M5 screws.
It is a bottle holder for the trunk which makes transporting wine and sparkling wine bottles easier
This is a temporary replacement cap / plug For 2018 Volkswagen Tiguan (May fit others models even Porsche!) Washer Fluid
This is a temporary replacement cap / plug For 2018 Volkswagen Tiguan (May fit others models even Porsche!) Washer Fluid fill. For reference the original part number is 3Q0955455. Category: Other
Dieser passgenaue Smartphone-Halter wurde speziell für den Volkswagen Tiguan der Baureihe 5N entworfen. Er sorgt für einen sicheren, vibrationsarmen Halt deines Handys und fügt sich dezent in den Innenraum ein – ideal für Navigation,…
Wall holder for VW Tiguan Pre-Heater remote control, should fit also for other VW models if remote control is the same. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.15 Infill: 20%…
Printed with PLA 3 Wall loops 0.12mm layer height but standard 0.20 would be fine too Filament swap for the last 2 layers
2 Inlays, um den Raum in der Mittelarmlehne besser nutzen zu können. Die untere Ablage hat Fächer für eine Parfümflasche o.ä. mit einem Maximaldurchmesser von 56mm kleinen Schreibblock Stift meinen Airbag-Schlüssel ( Link ) einen AirTag…
A bag holder hook for attaching to the left side of the trunk in a 2025 Tiguan. Remove the original cover and turn the channel on this part using a coin.
Used the excellent Opencad file of Chris Hill (thanks!!!) to create a tray that would fit in the VW Tiguan 2023. Since I have an iPhone 14 Pro I had to adjust depth of the lens recess and also changed the cable holder to fit my version of…
uploaded v3 version print it with organic supports and exactly the way model is presented in stl file
![Volkswagen Tiguan trash can [bin]](https://media.printables.com/media/prints/573208/images/4584367_dbcf84d1-d150-46a4-872c-fa5c4514b40b/large_display_kosopen_573208.jpg)
