1 / 1
Sunroof switch block for Tiguan — image 1

Sunroof switch block for Tiguan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a small piece that fits over the power sunroof switch and prevents it from being operated.

Rating
0 / 5
Likes
3
Downloads
46
Makes
0
Views
850
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a small piece that fits over the power sunroof switch and prevents it from being operated. It is useful when a roof rack system is installed that doesn't have enough clearance for the sunroof to operate safely.

I have designed this to fit a Tiguan 2nd Gen Facelift (tested on NAR 2021 Tiguan).

Printing instructions
  • Choose which version you'd like (no text, or “LOOK UP”)
  • Print as-oriented in the .stl file, with the friction dots up
  • Choose a material that is appropriate for automotive use
Operating instructions
  • To install, gently push it over the power sunroof switch; it will be held in place by friction
  • To remove, push one end inward to tilt the opposite end down. Grab it and remove gently.
Troubleshooting and safety notes
  • The friction fit requires the sizing to be precise, and different materials might require some tuning. If it doesn't work as expected, try scaling the z-axis.
  • Make sure that the power is off when installing or removing this, so you don't accidentally operate the power sunroof switch!
Other notes
  • If you'd like a small variation on this design to fit another car, let me know (e.g., length, width, different text, etc.)

Tags