1 / 1
Sunroof switch block for Tiguan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small piece that fits over the power sunroof switch and prevents it from being operated.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 850
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This is a small piece that fits over the power sunroof switch and prevents it from being operated. It is useful when a roof rack system is installed that doesn't have enough clearance for the sunroof to operate safely.
I have designed this to fit a Tiguan 2nd Gen Facelift (tested on NAR 2021 Tiguan).
Printing instructions
- Choose which version you'd like (no text, or “LOOK UP”)
- Print as-oriented in the .stl file, with the friction dots up
- Choose a material that is appropriate for automotive use
Operating instructions
- To install, gently push it over the power sunroof switch; it will be held in place by friction
- To remove, push one end inward to tilt the opposite end down. Grab it and remove gently.
Troubleshooting and safety notes
- The friction fit requires the sizing to be precise, and different materials might require some tuning. If it doesn't work as expected, try scaling the z-axis.
- Make sure that the power is off when installing or removing this, so you don't accidentally operate the power sunroof switch!
Other notes
- If you'd like a small variation on this design to fit another car, let me know (e.g., length, width, different text, etc.)