231 models
Design The base is tilted by 14 degrees, which enables the optimal ejection of ground material. The tilting angle also helps to remove all the grist from the grinder. In addition, clogging of the chute is prevented. There is a platform at…
I've recently finished my screen accurate Graflex lightsaber project. This is one of the two display stands that I designed for the lightsaber. It has a daring kind of organic design with the symbol of the Jedi order on its bottom. It was…
Modern and functional desk accessory designed for FDM 3D printing. The 45-degree tilted body and geometric perforated structure provide quick access to writing tools while maintaining a clean, contemporary aesthetic. ☕ Personal &…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
This business card holder STL model features a sleek and modern hexagon design, with a 45-degree tilt that provides easy access to your cards while keeping them secure. The hexagon pattern adds a touch of visual interest and texture to…
Tilted Pen and Sticky Note Holder Keep your desk organized and stylish with this 3D-printed Slanted Pen and Sticky Note Holder. Featuring a minimalist design, it combines a slanted pen cup and a holder for sticky notes, perfect for any…
Here are two different spacers with 9.5° and 4.75° inclination for Gravitrax marble tracks. For the 9.5° sloped spacer block, the top track entry is 10mm higher than the bottom track entry. For the second spacer block with 4.75°…
Wireless MagSafe mount for an iPhone in a BMW iX. It is inserted into the original phone mount in the center console.
Two holders for various bits. Tilted by 30 degrees, so holders can be located close one above another. holes closer to board are deeper and are for longer bits. Print with 2-3 perimeters, 0.4 or 0.6 nozzle, 15% infill, 0.2 layer, but…
A simple stand for guitar amps or similar. The cross brace provides some extra stability, but you can also use it without. When using the cross brace, you will get 200mm spacing between the two feet. This will result in 300mm width for…
This is an adapter for the original Ender 3 (possibly other Creality printers aswell) spool holder arm, that is rotated by 90deg so the filament is pointing to the front of the printer for Direct Drive. It is also tilted backwards by…
I remixed the peacock here to try to make it easier to FDM print: https://www.thingiverse.com/thing:182242 I looked at how Cura was adding support with a 70% overhang and I saw that tilting the model about 10 degrees backwards would…
Simple wall mounts for mounting with countersunk M4 screws. Base plate is connected to wall mount using M3x12 mm (may be longer) into M3x4x3 inserts. Two variants are provided: Wall mounts with only one insert for the left and right end,…
Tilted holders for various drill bits - the one with more holes can hold up to 10mm drill bit, the other one up to 15mm drillbit Print with 2-3 perimeters, 15% infill,0.4-0.6mm nozzle, 0.2-0.3mm layer, any material will do. No supports…
Hello! This is TILTED ADAPTER for Nocuta (or other 40x40x10) fan AND matching Fan Covers! This tilted adapter has 4 benefits: Noctua Fan is REALLY quiet and reliable! You should upgrade! Fan is pumping cooler air (instead of warm from the…
Had problems with the visible area in the picture of the camera. Had to tilt it a little bit down, that is what this stand is for. Has a bajonett like the original wallmount. Used PLA, supports needed for the bajonett.
Obviously I don't own the LEGO ® brand, and the fact that this fits their bricks doesn't mean they support this model. Go buy their products if you want quality, this is just an homage to their brand, not a LEGO ® supported product. I…
This is a bracket specific to the model found here . Similar to that of @Booleans_2229039 found here , but with rounded flanges to fit @ViniS' model.
This base model is the best I could find. I only added a hole to reduce the printing time. At 18% infill the stability is not affected
Universal holders for various ratchet socket sets. 3 types - for ¼ ½ and ¾ sizes. I suggest to print with 3-4 perimeters (with 0.4 nozzle) - so You dont snap off the little holder cubes when taking off Your socket. Infill - 15% is totally…
If you place your Reolink E1 / E1 Pro / E1 Zoom Surveillance Cameras in a high position, you will not be able to see much of the room, especially if it is a small one. With this tilted base you will be able to make the camera frame more…
An optical illusion shows an impossible triangle when viewed from the correct direction.
I needed a tilted support. My camera is installed on the corner of my house's front wall. With this support, my camera now covers my house's front wall. I used 3x4x4 heat inserts for fixing the original support plate but you can also use…
This is a model for a bass body optimized for left hand comfort. The fretboard is not parallel to the body surface, but tilted down. Kinda like the Torzal basses, but without the twist. Also, the lower horn is shaped so that the bass can…
An Adapter that mount the spool holder on top of your printer to work with quinly. Tilt is set for 45 degrees so the spool is set back behind the frame a little bit. It works great for 1kg spools of filament for a direct drive setup. I…
Just a rather quick hack Remix, slicing the front off the original, and tilting it by 15 degrees, to have a little more FoV for Timelapses. Preheat view to the nozzle is just fine, but the first layers will not be visible while being…
👟🧱 Double-Tier Wall-Mounted Shoe Rack – Tilted and Compact Design 🧩 General Description Organize your space in style with this two-tiered, sloping wall-mounted shoe rack. Ideal for small spaces, this rack attaches directly to the wall and…
Showcase your prized Hot Wheels or other 1:64 scale die cast cars in style with this custom 3D-printed display shelf! Featuring a sleek, tilted design, each compartment perfectly displays up to 10 cars, making sure they stand out from…
The original design was perfect, but I needed some more tilt to it (30°)
Printed without any supports. There was some stringing and sagging but nothing major. Cleaned it up in less than 5 minutes and it was good to go. Holes are 3.2mm wide so M3 screw should go in without any problems. What's needed…
A tilted platform to keep underneath your mouse pad. I find this much more comfortable for my wrist, and a cheaper option than buying an asymmetrical gaming mouse. Fits a mouse pads sized 20 x 25 cm, you can always cut an old mouse pad…
This rack was designed to hold a small batch of microcentrifuge tubes while working with them. Suitable for both the 1.5 mL and 2 mL versions. Should fit any tube with an outer diameter of 11 mm. The rack comes in a straight or a tilted…
Handy stand to have your 3DS laying in front of you with a slight tilt. It's very comfortable to e.g. Wondertrade a lot without having to pick up the device all the time and offers a hole for your pen to rest. It fits all forms of…
A tilted stand to allow the camera to look further down. I use it to look further down while place on top of a shelf. This model includes a 15 and 20 degree stand. If you need other angles, just comment and I will add it.
I only adjusted the size of the current STL model (originally made for the G3) to fit the UniFi Protect Camera G4. This was a fairly simple modification, and full credit still goes to the original creator of the G3 model @ andrewjfreyer .…
English: I found this thing: https://www.thingiverse.com/thing:1962611 to mount my 24"-screen to the wall. since the case of my screen seams to be not the stiffest one, and the parts had a little bit loose fit, the screen leaned forward…
Flatbed printing at 5% infill is sufficient as the SC3 is very light. Printed on Creality Ender 3 V3 Plus in 3h.
This is a simple monitor stand that lets you tilt your desktop speakers up or down by a 18,4°. The stand can be printed without any support. Printer: Prusa Mini Filament: PLA Nozzle: 0,4 mm Layer height: 0,2 mm
Basic Versions I use on my Silakka54, modifications possible by Onshape ( LINK ) Update: 04.09.25 Added a tilted-corner and a tilted-corner-lifted
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) this is a quick print to save your cats from getting stuck in tiled windows its modeled after some wooden brackets i found on amazon, but i…
New version of my holder for EV charger cable Type 2 (Mennekes). It has tilted slot for charging gun, so it fits more cramped places. Slot has drain hole - so the moisture buildup can flow away. Its mounted by scews with countersunk head…
Tilted build plate holder for Anycubic Photon Mono M5 Allows resin to drain off prints after completion back into the vat Reccomend printing flat on build plate, no supports needed Standard resin is not sufficient…it will break after a…
Friction fit stand/holder for Unifi Protect G3 Instant. Cutouts for both microphone and USB-C cables. This model is tilted forward by 15 degrees and was designed as a table or above-cabinet mount to use the G3 Instant in an elevated…
A shelf to hold Gridfinity accessories at a 45 degree angle front and back extensions, added so it doesn't fall out
Printed with box on build plate and support for the hexagon adapter. Dimensions are 40mm x 70mm Fits in insert-empty.stl and similar.
I designed this to help angle my preamp, so that it was easier to see and adjust while I work or play games. Simply place and press the bottom of your preamp onto the stand. The bottom of the preamp should fit perfectly into the stand.…
Removed the jedi insignia for a much slick
106mm in diametre Work in progress, for now it is just a plate, I will later make it better to fit on the roof or a special lamp bracket. Category: Household
I created a tilted version - it is good for younger babies who don't yet hold the bottle high enough. This one is good also for the smaller bottles
Just remixed with much less time to print
Friction fit stand/holder for Unifi Protect G3 Instant. Cutouts for both microphone and USB-C cables. This model is tilted forward by 25 degrees and was designed as a table or above-cabinet mount to use the G3 Instant in an elevated…
I don't use the platform and cup, but it better when the machine is tilted.
Small stand with upward tilt to help with projection! (~8.5 degrees) Total height with Sonos beam on board is 105mm. ~20mm gap height in the rear. ~38mm gap height in the front.
I've bought a TP-Link Tapo C100 Camera to substitute one of my Reolink E1 cameras that broke (it's the third E1 that stops working in less than three years... stay away from this model!). Even though it can be tilted downwards, if you…
My Eureka Mignon Grinder has a (printed) base with 15° tilt to reduce it's retention, but my dosing cup kept sliding out of the holder often. This holder has a long neck to position it near the exit chute of the grinder, adding a negative…
A magnetic, tilted, minimal case for the Corne Choc Wireless keyboard. There is space for a 750mAh battery inside the case. There is also a slot for a power switch, placed under the microcontroller. I also added grooves on the front and…
I was building ergonomic keyboard called redox and I didn't have TRRS jack or teensy so I edited the case a little bit to house pro micro and usb c pinout board -…
Print needs support (from plate only) Its a tight fit and should work perfectly on an MK4 but may need a bit of resizing on different machines. (Cut at 47mm and 28mm in your slicer for quick test prints)
I made something for the OG players from fortnite
made hanging rack for different sizes of small paint bottles 27mm,35mm,40mm,30mm,25mm if your bottle is 25mm wide.. use 27mm.. leave a gap sizes listed are the inner hole size
Eureka Mignon Fork Remix Upgrade your Eureka Mignon grinder with this custom fork designed for use with a tilted bed in single-dosing operations. This remix of TrafficBroker's original design ensures a secure and precise fit for…
This is an adapter to tilt the Display to eliminate the glare from the sun. It is designed for my Joying 11.6" 2023 Headunit (SKU JY-UZD11N8) and a VW T5.2 Transporter Dashboard, but might also fit other headunits and dashboards. The…
I stumbled upon the Design by Psyclist and thought it was neat. Printed it aaand noticed it's hard to read because of the angle. So I decided to tilt it back a little. It works better now for my application. I just printed both from PLA…
A tilted stand for the Lego Space shuttle set. Uses the same holes as the original stand, so no changes needed. Printed with Esun PLA + , 3 walls 15% Gyroid. Supports needed.
This simple attachment allows for the build plate to be attached to the z axis after printing to allow for and ideal height and angle for resin to drip. Caution: The connector fits relatively snuggly, but is not a perfect fit, so I advise…
This is a tilted base for the Baratza Vario/Forte/Mahlkönig Vario home grinder. The tilt angle of 20 degrees helps coffee fall out when single dosing. The cup tray is a separate part and is designed to take M3 threaded insterts, and is…
Friction fit stand/holder for Unifi Protect G3 Instant. Cutouts for both microphone and USB-C cables. This model is tilted backward by 15 degrees and was designed as a wall mount to use the G3 Instant for a crib camera.
The original model is a fantastic idea, yet I it lacked the PCB holder. Instead of adding a tilted stand to your grinder, just replace the original base. As a benefit, the button is moved to the front left, which at least for me is…
Adapter for Bambu X1C printer screen that allows tilting it down by additional 45 degrees in case printer is up on shelf. Adapter has locking mechanism for both display and printer frame. Display has no collision when door is opened.…
This mod replaces the stock controller box. The heat sink is tilted 4 degrees to account for the aftermarket WTF rails.
Tilted keyboard feet (2 sizes)
Update 2026-03-18 Added modified keycap anchor key This is a slight modification of @bassamanotor remix, which is based on the original (see remix list) This prints face down with FDM instead of resin. Made the stems holes 4mm deep to fit…
Large ammeter perfect for surface mounting on laser cutter. Meter fits in the housing so can be mounted on top, front, or side of laser engraver. Parametric (Fusion 360) file can change the tilt angle (22.5, 30, or 45 degree).
Simple design of a light arm to turn an LED bar towards the printing plate. This design avoids the creation of shadows on the print from the hotend. It fits perfectly with the model I ordered on amazon , but can also be used with other…
Curved surfaces removed from keycap tops
a tilted rasier for eziviz security cam for internal usage to tilt the cam in a lower positioning operation to cover even the lower portion of view and bypass the tilt down limit of the camera
A easy model I created to lift my MSI GS75 for better cooling and typing experience, it's designed to have a slightly tight fitting so it won't easily fall out. Print instructions Because of the high temperature it might have to handle,…
This is a card holder for the 7th Continent. I use 1 card holder for state cards (red hand) as well as bonus cards (green hand). Furthermore I use 1 card holder for experience point cards. This can also be found on thingiverse:…
Tilted Build Plate Support for the Anycubic Photon Mono M5s Pro, remixed from an existing model and adapted to our own use. The design reflects practical adjustments made through hands-on testing in the studio. We opted to print it in…
Comfee AC 7000 adapter for tilted window or smaller door openings, no glue, minimal supports
My contribution is pretty much non-existent, I'm just uploading to save the next person a few clicks. All credit goes to @AMacG Opened FreeCAD and adapted the angle, as instructed by the original author.
This stand was created to support a variety of radios using the common battery slot on many HT radios and walkie talkies. Designed to support a radio on a flat surface and not fall over, enable it to be clearly viewed, allow operation of…
This is a stand conversion for the common Amazon Hygrometer. You can use this to conveniently transform the hygrometer into one that can sit on a shelf. You can easily snap the hygrometer into the "outer" casing; it'll hold tight as it…
This round, low-poly planter features a distinct angled opening that puts your favorite succulents on full display. The angled geometry catches the light across every surface, shifting colors naturally as you move around it. Originally…
Często potrzebuję użyć 1 lub 2 krople farby, a lubię korzystać z metalowych miseczek od Mr. Hobby i to rozwiązanie jest bardzo pomocne. Farba nie rozpływa się po całej powierzchni miseczki przez co nie wysycha zbyt szybko. Wymiarami…
The E3D Toolchanger tools are a challenging design due to the size, weight, and location constraints of the tool. For Hemera direct drive hotends, there is very little space for the part cooling fan, and most designs require the…
45 degree, tilted rack holders with clip.
This is a functional, 3D-printable kitchen sink caddy designed to organize dish soap, sponges, and brushes while keeping your countertop dry. The design features an elevated shelf for storage and an integrated sloped drain plate that…
Remix of the original model by MartinD, optimized for remote monitoring of my Prusa MK4 printer using a TP-Link Tapo C210 camera. The model needs to be printed with supports due to the cable guide and the bayonet mount.
I downloaded and was ready to print Lachrymose 's “ UBBI - Universal Bidirectional Bowden Interconnect - Rail Mounts” but OrcaSlicer reported problems with non-manifold edges and when I asked it to repair it (Windows service) for some…
I use this stand for my MiniCockpits MiniFCU to secure it with Velcro to an IKEA Elloven monitor stand. I've infilled the inlaid lettering with some white UV resin to finish it, but this is obviously not necessary for a functional stand.
This tilted bookstand creates a floating effect for your books — the stand hides neatly behind the cover, making it look like the book stands on its own. It’s a redesign of @Bignozz’s Baby Yoda Bookstand ( original model here ) To achieve…
For an alternative design, or a different storage capacity, please check these links: https://www.printables.com/model/1326070-15-ml-falcon-tube-holder-4x-6x-8x-10x or…
Printed of ABS, flap need 100% infill to have enough weight and close itself. Grease the hinge make smooth open close. Use foam window joint to silent the closing and make better seal, still not a air tight design. Main purpose is to…
Description: A cheeky little Easter bunny has made itself comfortable inside a cracked eggshell. With a playful expression and a shell that tilts slightly to one side, it looks like it just burst out a bit too energetically. This…
ENGLISH ------------- Only tested on T12-X, but can work on equivalent models with boxes of the same dimensions I found my T12-X soldering station a little too bulky, the screen not very visible and too dark. I also wanted to have all the…
I mounted my skadis 90° rotated, so none of the existing skadis stl's works. So I made this one as a remix from REDZC . You can download the other inlays here: link
Simple wedge design to achieve two things: -keep tilted windows from banging shut on a windy day -keep pets that try to climb though the window (and fail) from getting pinched to death in the window side
JPG Design3D A box to place letters for easy access, mounted to a tilted Ikea skadis. Designed for german "Standardbrief".
