Counting matching models…
Venusaur pokémon has intricate flower on his back, which is quite hard or impossible to print on FDM printer in one piece (you would need soluble supports). Especially when printing smaller size figure. I used Venusaur body from…
Česká verze Model legendárního českého tříkolového vozidla Velorex optimalizovaný pro FDM 3D tisk. Vhodný pro sestavení, vystavení i sbírku českých technických ikon. English A model of the iconic Czech Velorex three-wheeler optimized for…
10mm hook for IKEA Tisken. This way you can hang things with a smaller diameter hole on the Tisken hook. For example a towel with a metal ring. Will upload a clean base as well so you can modify and create your own! Base model:…
3D Model of Toothbrush Holder Seperator Compatible with - IKEA TISKEN (Article Number 803.812.94) Hack for IKEA product to improve user experience Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing…
A solid Tisken base which can be used to add your own parts to it. Not designed myself, but remixed from 3 different models... All had somewhat the same flaw, they where not solid or had some design issues so it wouldn't be editable in…
Shower holder with two angles for Your shower head with Mount - Base fitting on IKEA Tisken suction cup hanger. I remixed and slightly modified the two original models to create my first very simple model. I hope it will be useful to You.…
Háčky na klíče s prohlubní na oboustrannou lepící pásku širokou 2cm. Rozměry věšáku 100x20x22mm
This is a IKEA TISKEN replacement hook remix of the IKEA STUGVIK / TISKEN attachment (exact size) printed in two parts with no support careful, it's a very tight fit
Prevent your napkins from flying around. Do not use supports otherwise you will not be able ta add the lid halfway the print You have to print the lid first. If you print the box ad a pause halfway so you can add the lid (see pictures). I…
velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer
No support - two part soap holder utilizing IKEA TISKEN for its base! Only thing you need is a IKEA TISKEN (← click to open). Print both parts, insert first part onto the IKEA holder and slide the second part in. This is second part of my…
Rebuilt in Fusion 360 from basic bodies, so it's easier to extend! It is easy to build your perfect [soap/tool/toy/brush/headphone/etc] holder right in Fusion 360 without messing with meshes. It fits very well, snaps in with a nice click…
I needed a Soapholder for my Bathroom and had some Tisken Vacuum Holders from IKEA laying around ( https://www.ikea.com/de/de/p/tisken-haken-mit-saugnapf-weiss-70381275/ ). I know that you can buy a Soapholder from IKEA directly, but why…
What you need IKEA TISKEN Printed Part(s) Soap Dish Holder Optional Soap Dish Container Soap Dish Hook Print Instruction Nozzle diameter : 0.40mm Use Default Prusa Slicer 0.20mm IS Structural Print Settings Filament : PLA or PETG Infill :…
Trophy award 2024: Model je inspirovaný plamenem, který má symbolizovat nadchnutí a “zapálení” do 3D tisku. Ve středu se nachází krychle, která je základním geometrickým tvarem, tudíž hodně používaným tvarem pro 3D modelování. Dohromady…
🎄 Vánoční perníčky z 3D tiskárny MK4 – ozdobte si Vánoce stylově! 🎁 Hledáte originální nápad na vánoční výzdobu? Vytvořte si s naší šablonou vánoční perníčky , které nejen vypadají skvěle, ale navíc dlouho vydrží a můžete je použít jako:…
Update 12.12.2023 -Drobné úpravy a dojasnění pravidel. Dále se pomalu pracuje na rozšíření, které by mělo hru oživit. Na hru budete potřebovat vytisknout: 8x Podložka Velká 10x Rovná kolej 4x Podložka Malá 10x Zatáčka kolej 6x Vlak 3x Y…
Why settle for just one hook when you can have two :-)
3D file of the original IKEA Tisken support to replace the original suction cup with custom hooks, wallmount etc. Example here: https://www.printables.com/model/319150-ikea-tisken-hook Support is needed. See gcode.
Why only use the IKEA TISKEN ridiculously small hook when you can replace it with by a longer one and maybe even use two or even three What you need IKEA TISKEN Print Instruction Nozzle diameter : 0.40mm Use Default Prusa Slicer 0.20mm…
Fast to print phone holder that you can mount to any smooth surface! Only thing you need is IKEA TISKEN (← click to open). Print both parts, insert first part onto the IKEA holder and slide the second part in. According to IKEA, each hook…
Jde o box pro cívky, který lze snadno nasadit přímo na originál držák na tiskárnu Průša MK3. Z držáku je třeba při montáži sundat pootočením nejdříve jednotlivé díly držáku. Nevyhazujte je, za chvíli budete potřebovat. Vložit do otvorů…
Kroniky Avelu - tisknutelné žetony a figurky Jedná se o kompletní tisknutelnou sadu všech žetonů a figurek. Rozměry přesně odpovídají původním předlohám. Chronicles of Avel - printables tokens and meeples This set includes all tokens and…
The base blate slides into the TISKEN suction cup, you can simply model your own holder/adapter on top. I've also included a finished holder for the LILLNAGGEN squeegee though it is a bit tricky to print.
I printed the hook with PET. Important!!! Immediately after you're done, remove the hook from the print bed and mount it while it's still warm and flexible! It was difficult to assemble the hook, but now it sits perfect. We needed a hook…
Napkin, paper towel, tissue box for IKEA Fantastisk Print with at least 0.30 dimension: 125 mm x 125 mm x 50 mm
velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer
pro zásuvku je zapotřebí 4 ks magnetu 10x10x2 ( dva nad sebou na každé straně) pro uchycení madla zásuvky šrouby průměr M3 délka cca 16 mm odkaz na magnetické vratné ovládání…
You'll need an Ikea Tisken/Stugvik suction cup. Printable without support, but your printer has to be able to handle 40° overhangs. I printed it in PLA+ from eSun. Should be sturdy enough :) Enjoy and let me know if you encounter any…
This toilet paper holder design allows you to save both space in your bathroom and your tiles from the drilling machine. You can find the IKEA Tisken towel hanger, needed for the installation, on the link below.…
Klíčenka - přívěšek na klíče se smajlíkem a nápisem 3D print. Vhodné např. ke klíčům od místnosti či skříně s 3d tiskárnami, filamenty…
Added dovetail to the base so it can be used with soap holder I designed (much easier to print as separate models).
Hook for IKEA TISKEN suction cup
Tiskací písmena české abecedy s diakritiými znaménky, která jsou pevně spojená s písmeny. Tisk je dvoubarevný. Do výšky 1,4 mm tisknuto průhledným filamentem (nebo bílou barvou), dále barevně tak, aby v konečném vzhledu vyniklo celé…
Lidské měřítko asi 176 x 150 mm materiál bílé PLA
velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer
Mixed two models to make a workable Ikea Tisken holder for the Gillette Venus razor
The IKEA TISKEN is a very strong suction cup that holds a hairdryer without any problems. The inner diameter is 73mm and probably fits many models. The print in the standard draft profile (0,3mm Layer) with PETG (heat resistance) takes…
Double hook designed to fit the IKEA TISKEN suction cup. The double hooks are designed to hold the IKEA Squeegee LILLNAG
IKEA Tisken have very good suction cups that hold a lot of weight for a long time, so I decided to make a window bird feeder that uses this type of suction cups. The model has two parts: the feeder and the insert for bird food (so it can…
IKEA TISKEN Hook A simple little hook to hang up swimwear, soap, or similar things. Installation Take the basket off the suction hooks Put the printed hook into the gap, and slide it forward. Reattach the basket the the suction hooks…
Holder for soap which draining the water instantly. Also work with IKEA's previous Stugvik suction hooks.
IKEA TISKEN Basis-Element - genutzt um den passenden Handtuchhalter zu erstellen
Just another IKEA Tisken soap holder. Uses this remix of awesome Tisken base , as it's much easier to print two models separately and connect them with light press fit afterwards. Features: border preventing soap from falling out bottom…
V2 of my Ikea Tisken toilet roll holder. Tisken compatible base by Aphelion32 on Thingiverse
To avoid drilling a hole in the tiles for a hair dryer holder I reused an Ikea suction cup and adapted a simple ring. It should fit any normal hair dryer
IKEA Tisken Hook Holder remixed to utilize 3M VHB tape instead of the suction cup.
I designed this tray to attached underneath the Ikea Tisken corner basket. The size of the hex pattern is wide enough to hold my razor which is a bonus. My setup: 1 x tray 3 x bolts 6 x nuts (maybe 9, see note below) 1.Drop in bolt from…
Dovolil jsem si předělat do češtiny anglickou verzi. Překlad není samosebou doslovný tak mě neukamenujte. Přeložil nebo spíš vložil jsem tam slova které mi přišla vhodnější.
Toto je kryt displeje na 3D tiskárnu Prusa MINI a MINI+. Toto je remix. Zde je originál: https://www.prusaprinters.org/cs/prints/14571-prusa-mini-lcd-cover
This hook is made to hang up towels, cloth etc on the IKEA Tisken. We use it in the bathroom, on th eback of the door. Printed in 0.24mm with 5 perimeters for increased stability.
Jednoduchý boxík na uspořádání nářadí nejen pro 3D tiskárnu, ale také pro kancelářské potřeby. --- A simple box for organizing tools not only for a 3D printer, but also for office supplies.
adapter to fix skadis on Tisken suction cup
The modularity was inspired by these modular drawers: https://www.thingiverse.com/thing:2539830 These are a set of modular drawers to be hanged from a tile or glass wall using the IKEA tisken suction cups:…
Printed mine with simple pla in vertical position for better layer strength
Velikost si před tiskem upravte podle potřeby.
Test pro nastavení středu tiskové desky. Printable area test
Tired of suction cups that just... suck (or don’t, when you need them to)? Here’s a simple fix! This 3D-printed holder is made to fit Ikea Tisken accessories but skips the unreliable suction cups. Instead, you use strong 30mm double-sided…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro vás dekorativní stojanek na vsechny mozné typy phone a hlavne iphone! Stojanek umožnuje take provlečení nabijeciho kabelu. Nesmí chybet na žadném stole :-) Tisknuto…
The classic IKEA Tisken shower holder has 2 positions, but neither of them suits me. So I needed to design a special holder that would encourage the water to flow straight down when the shower is mounted.
Jednoduchý box na 3D tiskárnu za použití stolku LACK (ikea). Tato konstrukce je opravdu velice jednoduchá, skládá se ze 4 prodloužení nohou stolku dvou pantů a madla pro otevírání dvířek. Budete potřebovat 18x vrut na upevnění bočnic (HDF…
Slouží k rychlejšímu a jednoduššímu dokončování úkolů. Místo stříhání a lepení obrázků z poslední strany stačí namočit razítko do razítkovací podušky a obtisk zvířátka přenést do prázdného políčka ve cvičení.
Kalibrace 3d tiskárny zjistíte jestli máte snížit teplotu nebo rychlost
Hello Ive designed this simple holder for a razer or a brush. It fits nicely around the half circle in the back of the whole seriies from IKEA TISKEN. Works good for me It was inspired by this one from Thingiverse…
This model remixes Loewekordel's Venus Razor Holder model and an IKEA TISKEN hook model, with some modifications for fitment, into a suction cup mounted razor holder. The holder was made specifically to fit a Venus razor but might fit…
This mount can be used in the IKEA TISKEN series of suction cups. Instead of the standard available toilet roll holder which comes with a perpendicular “stick”, this mount will hold the toilet roll parallel to the wall in a more standard…
This is a modification to allow the IKEA Tisken to hold a shower head. The printed modification simply snaps onto the Tisken hook. I printed this in ABS because it was what was already loaded. I used Voron settings (4 perimeters, 5 top…
Simple holder for a 20mm rod to insert into the IKEA tisken holder. You need 2 of the parts and a rod that is the length of the shower cabin, which is now simply inserted into the holder. printed with 50% infill made of PETG
Hook attachment for IKEA Tisken Basket. Usage : Push it over the “lip” of the Tisken basket with the hook facing outside. Hang something on it! Print : I recommend using PETG for the print. It will need to bend a little in order to fit on…
A small accessory holder compatible with IKEA TISKEN corner shelf. The inner diameter is 20 mm. It fits for most shavers, toothbrushes or whatever could get lost in the shelf ;) Print Settings It clips onto the shelf and therefore should…
Un distributeur de coton qui utilise le système Tisken de Ikea n'hesitez pas à aimer et poster vos makes A cotton dispenser that uses the Tisken system from Ikea do not hesitate to like and post your makes
This design uses inexpensive Tisken hooks and a Ø16 aluminium tube. We've been using it for 2 weeks and no problem has appear, but Tisken force depends a lot on the surface, though. We use Ø200mm paper rolls, but .stp is provided to…
Smart hanger for toothbrush which fits on IKEA Tisken basket series. Hanger for Gilette Fusion also available. Hanger base is common. Then just use hanger of you choice. No supports needed. 0.2 mm layer. PETG or better recommended due to…
Mini model 3d tiskárny original Prusa i3mk3s+.
Pistole na vodu poháněná malým čerpadlem. Baterii je potřeba vytisknout a složit podle instrukcí zde. https://www.printables.com/model/961003-baterry-pack-se-dvema-clanky-18650-aku-blok Tisk: Materiál PET-G nebo PLA, pravou a levou stranu…
Small circular bird feeder, that uses Ikea Tisken hook as a base of connection to the window. I thought that this is original and innovative idea, than I found out im not the first one who had it, so here is my try on this kind of feeder.
Print with custom supports on the clip.
Original suction cup holder didn't suck well (pun intended), so recreated one with M4 hole to screw it down (pun intended as well). Print as is, no supports needed, 0.2mm layer recommended, 10-20% infill, 3 perimeters. Created in onshape,…
Adjustment of the longer mounting grooves to set the optimum height.
Nechtělo se mi vrtat do zdi, tak jsem si držák upravil na rám Prusa tiskárny.
wolf footprint stamp for education - real size / razítko otisku vlčí stopy pro výuku - reálná velikost
IKEA Tisken basket hook for kitchen mounting. No support is needed. For 16mm diameter tubes.
Doppel Zahnbürstenbecher für IKEA Tiskenhalter / Double toothbrush cup for IKEA tisken holder
Velikost boxu je omezena pouze velikostí spojovací kulatiny a krycích desek. Kulatina ø10mm, dřevo, nebo kov, volba je na vás. Já použil dubové kulatiny. Krycí desky tlusté 3mm, materiál je opět na vás. Já použil plexisklo co jsem měl na…
Tisk vycházi na podložce tip top . Filament PET-G , 1,75mm Průša Tisk Trva cca 1d , spotřeba filamentu cca330g . Stojan na 8 tisk.podložek pro MK4 s toho jedna pro sklo.
Výuka zlomků je pro žáky I. stupně ZŠ náročná na představivost. Praktická pomůcka, se kterou mohou žáci pracovat jednotlivě nebo po dvojicích významně ulehčí pochopení významu zlomků.
Print with more infill to prevent breaks when someone pulls the towel. Adapter for this model. https://www.ikea.com/hr/hr/p/tisken-kuka-vakuumski-drzac-bijela-70381275/
pro snadnějsí tisk odnímatelná rukojeť velikost se dá libovolně upravit ve sliceru ---------------------------- Removable handle for easier printing the size can be adjusted freely in the slicer
Délka drážky pro tiskovou podložku je 256 mm. Šířka drážky je 1,2 mm The groove length for the print pad is 256 mm. The groove width is 1.2 mm
Hi, Here’s a small and easy-to-print holder that fits snugly onto an IKEA TISKEN suction cup. It allows you to hold a standard-size shower head. In my case, the shower head is made of metal it holds securely and can easily be removed.…
Účastníci vytvoří několik model letadel (celoplastový, kombinovaný, kluzák) na hraní a pokusy s leteckým modelařením. Během projektu si účastníci vyzkouší všechny fáze od 3D modelování až po tisk.
This is a holder for Oral-B toothbrush heads for IKEA Tisken basket. I printed it with PETG, it snaps on the basket with a little force, but when I try to remove it - it breaks. So just snap it on and leave it. Works with adult and…
I needed a sturdy adapter for my official and printed Tisken stuff. I remixed Dr. Joenzel 's model to be screw-fit but also take up the least amount of space possible, while continuing to match the aesthetics of Tisken hooks. Compatible…
A simple and versatile toothbrush and toothpaste holder compatible with IKEA Tisken products . Tisken suction cups are extremely strong and cheap and are available in a variety of colors. They are perfect for thinkering as the mouting is…
Model vychází z https://www.printables.com/model/1534297-3d-printer-bed-cleaning-spatula-fast-and-light-bed od GT 3D Makers (není upravovaný, ale využita myšlenka ). Model je ve vytvořen FreeCADu, přiložen i zdrojový soubor.
Rozměry: 47,5mm x 69,5mm x 15mm. Tiskárna: Elegoo Neptune 4 MAX Filament: Creality Ender PLA (oranžová) Namodelováno přes předlohu 2D omalovánky pomocí kružnic.
