Counting matching models…
This model is also editable on Tinkercad This model is only for the TKL keyboard (the one without a number pad), if you have one with the number pad, the circuit board will not fit into this box. !!! C plate must be printed with 0.1mm…
Yet Another Filament Clamp - keine fetzigen Namen, nur eine optimierte Filamentklemme! Schnell gedruckt und einfach angebracht. Kein Schnickschnack!
1x1 keycap for Logitech G915 TKL with Bitcoin logo. I used supports to the bed, using needle nose pliers made removing them simple. Careful not to grab the nibs. --- If you feel like tipping me, send a bitcoin lightning payment to…
You can modify it on Tinkercad. https://www.tinkercad.com/things/liW1dUVhePl-touch-id-boxwith-battery Please refer to the installation method as follows: https://www.printables.com/model/355924-clickable-touch-id-box-tkl-board-wired It is…
THIS IS A PROTOTYPE This is a set of a TKL (normal size, full height TKL 80%) and matching NumPad. Both consist of a plate, on which the switches are mounted, a "pcb" on which the hot swap sockets are placed and a base, in which the USB-C…
Sizes of the models (Width): Size Width (mm) 60% Mini 293 65% - 311 80% Tenkeyless 366 100% Full Size 399 Printing Instructions: Resize: If needed (already common sizes), resize the model to fit your specific keyboard. (Needed width/model…
I designed a phone stand for Logitech G915 TKL keyboard. I have tested this with iPhone 12 and 16 pro max. Although, not tested, this but it should be fine with iPhone 11 all the way up to 16. Maybe even with some android phones as well.…
Clamp for secure and damage-free clamping of cylinder pins and wooden dowels. Suitable for shortening or reworking cylinder pins or wooden dowels with a file or saw. Clamping diameter 12, 10, 8, 6, 5 and 4 millimetres. Update I have added…
The idea came from the problem i had where the charging cable i would often use to charge my phone when lying in bed would always fall down whenever i didn't need it and had unplugged it from my phone. Now it can finally rest here, beeing…
I was looking for wrist rest designs, but could not find anything I liked. This is the second major iteration of my 3 part design. Adjusted the drop off angle after long term use. Now it is more comfortable. I recommend printing the pads…
Download the new version instead: https://www.printables.com/model/1011638-mxx-tkl-v11-custom-mechanical-keyboard For this Keyboard you will need: A standard 88% pcb: Compatible pcbs include: H88c, Mechlovin' Infinity 87.5, Galatea,…
For this Keyboard you will need: A standard 88% pcb: Compatible pcbs include: H88c, Mechlovin' Infinity 87.5, Galatea, MNK88-T, ApolloH Hotswap 88, other a.87 spacing f13 layout usb-c pcbs (may or may not work with usb mini pcbs cannot…
This is one of my keyboard designs I made with my keebcu keyboard customizer. It is a smallTKL mechanical keyboard with ISO layout which can be printed on smaller printers such as Prusa Mini. Small TKL is TKL keyboard but squeezed…
I got the new TKL from logitech and noticed it had bluetooth on it and had to make this. I partially used an existing stand mount from https://cults3d.com/en/3d-model/gadget/2-in-1-asus-rog-ally-case-stand . So now you can play with a…
keebcu - andimoto smallTKL - mechanical keyboard This is one of my keyboard designs I made with my keebcu keyboard customizer. It is a smallTKL mechanical keyboard which can be printed on smaller printers such as Prusa Mini. Small TKL is…
Eine Abluftklappe für Marley 110 x 54 mm Flachkanal. Die Klappe wird nur auf einen Kanal aufgesteckt und links sowie rechts mit je 2 selbst bohrenden Schrauben gesichert. Die Klappe selbst wird mit 2 kleinen Schräubchen, oder eingeklebten…
Print the rest of the parts from Calvin's original model , and follow their excellent assembly instructions. I printed the box at 0.10mm (DETAIL) layer height, but it should print fine at 0.20mm (QUALITY). I painted supports on the USB-C…
They feet for the Glorious GMMK TKL keyboard broke, so I made a replacement. Measurements if you are interested: The FreeCAD model is partially parametrized. isize → inset size, width of the walls Rod Diameter → diameter of the rods…
Simple Mysterium TKL Keyboard Stand to angle the keyboard a bit. If you use feet like these , and you think they aren't enough, this stand may be the right accessories for you.
I was looking for wrist rest designs, but could not find anything I liked. I made it a 3 part desig to fit on most printer sizes. I recommend printing the pads from TPU with 5 % Gyroid infil l. Middle part design is already updated…
Keyboard for CherryMX switches
For tkl or smaller version cover keyboard now size 379mm by 193mm by 80mm no more dirty keyboard enjoy now !
Updated 8/25/2025 Fixed cherry mx stabilizer top Updated 7/10/2025 Added a cherry mx stabilizer top. Use top_left_cherry.stl and top_right_cherry.stl Note: Not Tested, may be too tight Updated 8/12/2021 Added a teensy mount as well as…
A simple and easy to print replacement belt clip. You can, but I would not recommend using "simple" PLA. The reason is it's brittleness and its low stress resistency. Aufgrund geringen Stressresistenz von PLA und das Bruchverhalten würde…
Made to fit my Keychron K8 TKL keyboard into the Corsair k63 Lapboard. my keyboard feet are extended fully and these adapters lock the keyboard in place using the keyboard clips the Lapboard comes with. With a thin enough cable i can plug…
Beim VW Tiguan 7-Sitzer werden die Gurte der 3. Sitzreihe bei Nichtbenutzung in Halterungen im Kofferraum gesteckt. Leider rutschen sie im Alltag allzu schnell heraus und behindern das Rollo der Kofferraumabdeckung. Deshalb habe ich mir 2…
Since my first published keybboard was The1987 (https://www.printables.com/model/299777-the1987-a-modular-retro-inspired-87-key-mechanical) and it's fairly popular, and its designed around the Phantom circuit board and Teensy 2.0, which…
flexible cable clip / selbstklebende, schraubbare u.flexible Befestigungsclips → Sizes ca. x = 17, y = 14, z = 8, h = 7.5 | x = 21, y = 17.5, z = 10, h = 9 x = 25.5, y = 21, z = 12, h = 11 | x = 29.5, y = 24, z = 14, h = 13 → 0.4 Nozzle →…
This is a set of plates to go under the keys on a keyboard. Printed in white, it reflects more light from behind the keys. Fits a Royal Kludge RK87 Sink87G – not sure what else. The teal-backlight photo shows before/after. I wasn't happy…
Wrist rest for the Logitech G915X TKL This wrist rest mounts with the screws into the bottom of the keyboard. No need for additional hardware. Print settings. Layer height 0.2mm Support: Yes (I used Normal, not tree) Infill: 5% For a…
Eine Ersatzklemme für mein Featherboard von NEW für die Bosch GTS635-216.
Die Halterung ist mit einem nicht dicken Bithalter kompatibel.
Spacebar for Ozone Strike Battle TKL, but maybe it can fit even more keyboards, please check the dimensions before print. Printed in Prusament PLA Marble, but PETG should not be a problem either.
Is shrinkflation amusing yet? Less 2187 for more...something Since I recreated The1987, it followed suit that i should include this one as well. Its the more modern design with a small sprinkle of cyberpunk. The2187 is the pretend future…
Do you like Lego? Do you have an Apex Pro TKL keyboard? Well you're in luck with this printable that adds a brick-compatible extension to your keyboard. Customize it with your favorite creations or arrange your favorite mini figures to…
Citroen C3 Picasso Magnetklappe Gepäckraumboden / Rücksitzlehne. Für die beiden Klappen, welche magnetisch an der Rücksitzlehne Richtung Kofferaum angeklappt sind. Diese werden heruntergeklappt, wenn man die Rücksitze zur Vergrößerung des…
Luftklappe für mein BWWP Projekt, dokumentiert im AkkuDoktor Forum: https://akkudoktor.net/t/meine-ochsner-europa-333-genius-bwwp-homeassitant-pv-ueberschuss-diy-zu-und-abluft-klappensteuerung/28272/2?u=kalleknall Gesteuert durch einen…
I had an apex 7 tkl I wanted to use on my sim, and modified this mount to hold it very securely. The keyboard is held solely by friction, and is quite tight. The riser requires M3 heatset inserts, and is fastened using m3x8mm BHCS with…
A simple attachable tablet stand I made for the Redragon K622 Horus TKL keyboard. Requires padding for a secure attachment.
UPDATE: I'm mad. Absolutely mad... I made this: Disclaimer: this project was printed by JLC3DP at my own expense, no affiliation, but I do have to say; amazing service. I do however NOT recommend ;P Because then my keyboard is no longer…
Groove buttons to connect the table top with the base assembly. You need usually 2-3 per side. Printing Material doesn't matter, i used PETG because it is my standard material and a 0,6 mm nozzle with standard profile. I printed with the…
A Heartkluchifs 3d fractals. Happy printing.
Wohin mit Eintrittskarten, Notizzetteln etc? An deinen Spiegel! Wenn du einen Spiegel vom Typ Nissedal von Ikea hast, kannst du diese Klemmen benutzen, um die Dokumente daran zu befestigen. Werden einfach auf den Rahmen geklemmt, keine…
Zur Befestigung werden zwei 5- oder 6-mm-Schrauben benötigt. Die Größe der UPS-Schnittstelle beträgt 32 mm in der Dicke und 105 mm in der Breite. Theoretisch kann dieses Modell als Basis für die Befestigung anderer Mini-UPS oder Boxen…
A handwired TKL keyboard with an integrated PMW3389 trackball, a 5° tilted case, two extra USB ports, QMK and Vial firmware. I wrote up the whole build on my site: https://salavat.me/trackboy/
I have been using variations of this stand for all my keyboards for several years now, printed in standard PLA. Whenever I need space on my desk, I park the keyboard right in front of the monitor. In seconds, that opens up enough room…
UPDATE: I'm mad. Absolutely mad... I made this: Disclaimer: this project was printed by JLC3DP at my own expense, no affiliation, but I do have to say; amazing service. I do however NOT recommend ;P Because then my keyboard is no longer…
Spacebar for Ozone Strike Battle TKL, but maybe it can fit even more keyboards, please check the dimensions before print. Printed in Prusament PLA Marble, but PETG should not be a problem either.
A simple Holder for an iPhone onto a Logitech G Pro TKL keyboard. A friend asks me about a holder, that he can use his iPhone as a Streamdeck, with the original app from elgato. So I designed one. I have printed the holder out of PETG…
If your using the app for a button/macro pad like the Elgato Streamdeck. It should fit all MagSafe-holders with a maximum diameter of 58mm. It slides into the cable mount on the bottom and can't move because of the cable clips.
Cable relief designed to prevent strain on the G413 TKL SE USB cable. Material: PLA Layer height: 0,12mm (or smaller) Estimated model printing time (0,10mm layers, PLA, P1S): 17m40s *(note): Don't forget to split the main STL or STEP file…
Die Mastklötzchen stützen den Mast und werden in die Lücke vor dem Wellenbrecher und den Mast eingeschoben. Mehrere von diesen Klötzchen können zusammen gestapelt werden
I wanted a dust cover for my new keyboard, so I designed one. The one on the photo is the first prototype, the design file contains the final version which is a little more aesthetically pleasing. Fits diagonally in my printer's 350mm bed.
This is a keyboard holder for mini TKL keyboards. It's made for the slightly angled bucket seat bracket made by https://sim-lab.eu/ . It works best with keyboards around 30cm. The Logitech MX Mini is perfect, for example.. The REAR…
I wanted to make a custom hanging bracket for my chair and my wireless keyboard. I came up with a multi piece system but the key is this foot/bracket that fits the keyboard perfectly.
![Keyboard Cover V.[TKL]](https://media.printables.com/media/prints/921458/images/7031738_e4bf72b3-2ff3-4b40-8872-329c0d47b16a_23c1d9d9-5315-4756-a244-b0fcc6de48c5/snimek-obrazovky-2024-06-23-203612.png)
