473 models
Lámpara para litofanías compuesta por base, tapa y 4 litofanías. Vais a necesitar los siguientes materiales: 8 imanes 5x3mm https://amzn.to/3vsHRUv Casquillo para bombilla E27 https://amzn.to/3TBWgWi Bombilla E27 https://amzn.to/43GyKMw…
This housing is designed to hold the Time of Flight and LED (ToFnLED) board for Gaggiuino over the water tank using magnets. The board slides in from the end, clipping in with the flex arm clip. If the board needs to be removed it can be…
The B-52 Stratofortress is an American long-range strategic bomber. The B-52 was put into service in 1955 and has remained in service for over 60 years. The USAF projects that it will serve another 30 years before it is retired. Since its…
dowel for styrofoam insulation. No pre drilling needed. prints without support in 0.2mm layer hight Installation: Screw wall plug into non-plastered insulation material without pre-drilling with an electric drill or screw driver and T30…
Why and what for This will allow you to connect 4mm OD (standard size) PTFE Tubing to Autofeeders of Snapmaker U1. You can customize all the colors. Discussion topic -…
This is a Dremel / Rotary tool cutting mount for precision cuts of rods, screws, bolts, drill bits, tubes and more. I wanted to do the Pin Mod on my Voron 2.4r2 and I didn't have an accurate method to cut the pins to size. I ordered the…
This model is a detailed 3D printable replica of the legendary Tofaş Şahin , one of the most iconic cars in Turkish automotive history. Known for its simple yet robust design, the Şahin has become a cultural symbol, widely remembered for…
This is a cult car model in Turkey. It had been sold over a million unit. It also known as "bird series" car. Instructions I've found the model in 3D warehouse. Below is the link for the original .skp file which i added at the file…
Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…
This model uses an internal passage to route the fishing line through the tip to the tie point.
The world-famous US strategic AirForce bomber called the B-52 Stratofortress is borought to you by VualtChaser Settings: Printer: Prusa MK3 Slicer: PrusaSlicer Infill: 5% Retraction: No Nozzle Size: 0.40 Supports: Yes. How to print: To…
Heyho :) This is my Frame press for many different tasks. I personally use it for Tofu or to glue (long) things together in my workshop. Of course I don't mix them up xD You can use the press with one Frame set or even more. With the…
Female thread to fit Siraya, BlueCast, PowerResin, ApplyLabWorks and probably others. Male Thread to Elegoo/Anycubic/Prusa (old) brown resin bottle Lid. Double check your printers tolerances! I have printed these threads using PETG with…
Inspired in the new Ortofon Concorde MK2 model. Use the model with guide if you can, depends on if the broken finger lift has left a hole.
English Introduction: This 3D print template allows you to create a scraper with a plastic blade that won't damage your print bed. The plastic blades are printed with a 0.2mm nozzle, and it's recommended to use the provided print profile.…
ArduCam IMX519 https://www.arducam.com/product/imx519-autofocus-camera-module-for-raspberry-pi-arducam-b0371/
Hand Wash only! make sure you print two screws and two posts. You will only need 1 of the top and bottom plate.
I couldn't find a good angle grinder disc holder that printed without supports, so I put this together. Print on the flat bottom and it should work without additional supports. Any filament will work, but I use PETG as the default for…
Do you need a last minute gift? This might help you :-) All you need is a photo. You can resize the model to all photo sizes. I hope you like it and you can use it. In Germany you can print at most “dm-drogerie markt” for 50cent a 15x20cm…
Designed a couple of BMW e30 Brake/Fuel line clip. Should not be sold for 30 bucks, like some a....s are doing it. Have fun, keep printing
Lampara litofanía Star Wars. Tenéis todo el proceso paso a paso explicado en el video. Tamaño de litofanías: 109mm x 142mm x 2,8mm Materiales necesarios: Web para hacer las litofanías: https://tool.itslitho.com/ Portalámparas:…
Soporte tipo lámpara para cuatro litofanías con luz led en la base. No requiere soportes. Fácil de imprimir.
Da ein User hier nach einem Alu Profil gefragt hat habe ich einfach mal eines gezeichnet und hier für euch hochgeladen. Ob sowas Sinn macht ist die Frage aber das dürft ihr selbst entscheiden. Das ganze im Slicer einfach auf die…
Little hook you can attach to the back of your picture frames.
Soporte para litofanía semicircular con luz posterior tipo led. Fácil de imprimir, no requiere soportes. Liviano y estable. Print instructions Luego de imprimir se coloca una lámpara tipo led. La litofania de tamaño 10 x 10 se coloca con…
A simple tofu press. Printed at 15% infill.
Lampara litofanía a color de Super Mario. Dejamos los diseños necesarios para poder poner las imágenes a color detrás de cada litofanía, pero recordar ajustar los tamaños correctamente. También podéis utilizar las imagenes que más os…
Holders for 4.5 inch flap disks or cut off wheels with a 7/8ths arbor. The taller model is 4 inches tall, which should fit in most medium height toolbox drawers. It has its full circumference up one half-inch before the cutouts for…
This is a cover case for Samsung Galaxy A25 without cutoff for volume and power button. I remixed the model from Johan Fuhri, I cover the big cutoff with two button for pressing the volume and power button. I don't use the fingerprint…
After seeing the great upload from This Noise I remixed this into one piece and made it a bit thicker. A simple colour swap is all that is needed. No special printing parameters but I did turn ironing on.
Minor modifications to fit the square camera of the Arducam autofocus camera. The lower pins were moved as well by 0.8mm to have the board fit easier into the case.
Tofaş Rearview Mirror Ornament
Print in place Twin Concorde Flightcase Replacement – 3D Printable Model This 3D-printable replacement for the "Twin Concorde Flightcase" is designed to securely store and protect two Ortofon Concorde-style DJ cartridges. The case…
Hi! I had always wanted a tofu press, but most are rather expensive, hard to get, or require you to check on them often to adjust the pressure. So I designed one of my own, it is easy to print (no supports), easy to use, and works great!…
Skull And Spine Toff / Finial. Glue/Add to top of pole or staff gcode is pre-spit with dowel connector. (organic supports)
Creado en Creality Ender 3 V3-KE, al 20% con boquilla de 0,4, Cama 50º y boquilla a 220º. Accesorios de Aliexpres y cableado personal, no hay que tener mucha idea de electrónica, es básico solo alargar cables, con 4 pilas de 3,7v. dan una…
Lámpara para litofania triangular hecha en tres partes cuerpo tapa y patas. Las medidas de las litofanias son de 100x90x3. Bombilla E14 LED. Se aztualizó, para unir la tapa al cuerpo con tornillos de M3x12, se recomienda roscar con macho…
This is a vented case for a "Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module" found on Amazon . Sold by many sellers and should work with any of them. Both the top and bottom of the case have vents cut in…
Printed in PET-G. done mostly at 0.3 layer height with 70% (or better) infill for strength. Supports needed for the outside box, sieve and press (organics work well). Assembly is as shown in the photos. Take care putting in the 4 pegs…
So, the other day i dropped my bottomfed Mod and it perfectly landed heads first on the ground. Intrestingly the drip tip scattered into a douzen pieces. Well since we're here, lets design a custom one. You can either print it as is,…
These floating handles will mean you are less likely to lose them in the murky depths of your water bowl. I like using 20lb fishing line as it holds up quite well.
This is a swift remix of the original model, enlarging the aperture for a better fit of the lens, ensuring clear camera lens and enabling proper function of the motorized lens, also known as autofocus. Note: The picture illustrates a…
he diseñado un cubo para 4 litofanias con la parte de abajo hueca para poder ponerle un porta-pilas para no estar con cables de por medio, con un hueco en un lateral para poner un interruptor soldado a los cables de los leds y a las pilas.
As I didn't found an enclosure that checked all the boxes, I've designed it myself. It's a an enclosure with a print in place hinge and embedded magnets. Has the space for the soldered wires that are going to stick through the back. The…
The starship and its cloudy take off base (2 pieces)
Quick mod to fit in the Arducam 16MP Autofocus camera board based on the Sony IMX519 sensor. Due to slightly lower supports I had to use tiny screws, but that's easy to fix.
so... back to planes Anyways, here's the B-52H. I mismeasured and the wings ended up a little chunkier than I'd have liked, but it's not abhorrent. It should print with minimal supports, only on the engines and the little antennas along…
Print all files I have provided. Color change at layer height is required to get the lines for the road and parking lot. I used some slicer and Fusion360 trickery with my personal build in order to get different colored lines. In addition…
Support distributeur nourriture poissons EHEIM AutoFeeder 3581
video de como hacer litofania llavero aquí: https://www.youtube.com/watch?v=j1qnoJOoaa4
A 3D-printable dowel for fastening lightweight objects with screws to external thermal insulation systems such as EPS or Styrofoam façade insulation. Compared with similar insulation dowels, this version uses slightly steeper threads.…
This is an eight-leaf overhang torture test, with overhang angles from 40 to 80 degrees in 5 degree steps. Each angle section is labeled on both sides for readability. The base of the model is labeled to help identify the original print…
Just as in johanncc's original, this model requires no supports. It's a minor modification, just making room for the extra module underneath the lens.
Base para lámpara luna o litofania. Puedes incorporar casquillo con tubillón roscado para dejarlo fijo y un muelle de tulipa para sujetar la lámpara. Imprimir con la parte plana tocando la base de impresión para evitar soportes.
Jakeu's Tofu60 (Redux) Wrist Rest IMPORTANT: In order to print this model, you'll need at least 256x256x80 mm of space on your bed You'll have to install 3M™ Bumpon™ SJ5344 rubber bumpers (19.1 x 4.1 mm) for it not to slide on your desk…
Fit your larger Inland/esun/yousu bottles in the Anycubic M3 lines autofill cap. took me quite a few versions of printing and testing to dial things in how i wanted them but it works great!
Bola de Navidad Es una bola diseñada para insertar una imagen de una litofania. La bola es una semiesfera con un agujero trasero para insertarle una luz led del árbol de navidad y poder disfrutar de la imagen en el árbol. Impreso en PLA…
Hier zwei verschiedene Modelle von Trichtern die ich mir für die Werkstatt hergestellt habe. Einen großen mit großem Durchlass zum betanken von Fahrzeugen wie Vespa PK50 oder Traktor und einen etwas kleineren mit integriertem Gewinde.…
Kristoff from Frozen movies. Little remix of original model from Mohammed Suhail.
Remix meines 1/6 Modells, ohne Text-Prägung, vier verschiedene Maßstäbe von 1/10 bis 1/16. STL only.
Do you ever open your rotary tool box only to find your cutoff wheel has broken? These brittle discs don't stand up very well to rolling around in your case while attached to the spindle, but I hate going to the trouble of unscrewing the…
Ortofon Concorde MK2 fingerlift Print settings: Printed with PETG 0.10mm DETAIL No Brim/No support
Need a last minute present? How abut a sweet image frame :) Please share the love, everyone needs it. Print the "Love"-Photo-Frame in default or any scaled size. Just cut out the photo, insert it and add the backsinde. Ready! Have fun, be…
This is a 2020 extrusion mount for a 16 MP Arducam Autofocus camera customized for my Voron Trident. Mount it in this order: Use an M3x8 SHCS and an M3 hammerhead nut to attach the 2020_extrusion_mount to the extrusion. Use an M5x12 BHCS…
Luego de imprimir se puede colocar en la parte posterior una iluminación tipo led. La litofania de tamaño 10 x 10 se coloca con pegamento en la parte frontal. No requiere soportes.
based on this open source image : https://creazilla.com/fr/nodes/7949345-black-cat-silhouette
Dose zum schrauben für Fotofilter mit 58 mm Durchmesser. Die Dose hat innen einen Durchmesser von 64 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit…
Mix of two focusers from calli and jslafas with my edits to make it suitable for nema 14 and basically no disassembly required except removing VisualBack and screwing it back with spacer and base UPDATE I have added baseplate for nema 17…
Vespa Kunstoffbuchse für Motordeckel ---------------------------------------------------------------- Vespa plastic hinge for motor hood
Yellow boxes in the .3mf are modifiers to ensure the hooks are printed solid.
Este diseño es una modificacion de este de aqui: https://www.thingiverse.com/thing:2770308 En el añado un hueco para poder usarla con un conector micro-usb como este:…
Boeing B-52 Stratofortress Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Designed for the 1st generation rockets of "Die Sternenfahrer von Catan" von Cosmos. Brim and support on build plate only are required. The replacement ring require to remove the existing (often broken) boosters' fixations. I did use a…
Helfer für Schraubverschlüssen an Kunststoffdeckeln - Dieser kleine Helfer erleichtert das Öffnen von Schraubverschlüssen an Flaschen dmit einen Kunststoffverschluss . - Es wurde ausgelegt für Schraubverschlüsse von Ø30mm für…
Fiat 124 (1976) / Murat 124 – STL release Single-piece, watertight mesh. Scale as needed in your slicer (STL has no units). Feedback welcome.
Description If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Case for ElectroCookie Mini PCB Prototype Board . This housing is designed to accommodate a VL53L0X Time-of-Flight (TOF)…
VELA DEL NACIEMIENTO LITOFANO, #CHRISTMASXCULTS https://cults3d.com/:1582995
TwistOff/ TO jar lid parametric model for fusion 360. Use the .f3d-file to adjust parameters. Please keep in mind that the norm-diameter is not equal to the glass rim outer diameter. If you only have the glass, please refer to the below…
I wanted a tofu mold I can take apart and didn't find one I liked so I made one. Actually, two, first one was waaaay too large, so I had to make smaller too. :) But that's great for cheese! First I made round holes when I started to…
Added v2. flat top and holes (6mm) to hold the top down instead of using heavy object Added little tap in the middle for the top to easily remove from the case. The new case contains 4 holes for the leg attachments. The leg attachments…
Litofania de Miyabi de ZZZ ancho de 3mm dimensiones 150x95 mm imprimir 100% relleno y configuración litofania
Happy 10th anniversary to the Raspberry Pi! <Description> Ultra small Pi Zero Case with Arducam 16MP autofocus camera for Tripod. PiZero_case_8_1_Zero_Case_withPiCamera_Top is Top Case.…
Kunststoff Palette Mastab 1/10
Model was helped made using https://github.com/Le0Michine/FusionGridfinityGenerator
Stofzuig monden voor op de slang van een Festool stofzuiger te plaatsen, voor op kleinere plekken te kunnen stofzuigen. Vacuum nozzles for placing on the hose of a Festool vacuum cleaner, for vacuuming in smaller places. Ludo
The Enhanced Buffer Lid Autofeeder with a small kick feature that improves the smoothness of filament insertion.
litofania de goku ultrainstinto
A wall mounted holder for the standard 4.5 inch angle grinder disks. There are two versions. One that holds 15 disks, and the other that holds 30. They fit flap disks as well as other disks like scotch brite pads. The holder sits at an 8…
Rotate for better positioning. No supports needed. 10%infill is enough. ------------------------- Rotar para posicionar mejor. No requiere soportes. 10% de relleno es suficiente. Video de referencia:
Autofill Adapter for Elegoo Jupiter Female thread to fit Monocure, MACK4D, Wanhao, Monoprice, eSun and probably other premium aluminum resin bottles. Male Thread to Elegoo/Anycubic/Prusa (old) brown resin bottle type. Double check your…
Dose zum schrauben für Fotofilter mit 55 mm Durchmesser. Die Dose hat innen einen Durchmesser von 60 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit…
Luego de imprimir se puede colocar en la parte posterior una iluminación tipo led. La litofania de tamaño 10 x 10 se coloca con pegamento en la parte frontal. No requiere soportes.
Scanning film with the Plustec scanner always took me a bit too much time, which led to some rolls sitting on my desk for months, waiting to get digitized. I figured that most of the time is spent cutting and loading the film into the…
Object Description: Ersatz für Kunststoffschiene-Halterung 538.002.45.01 von MEPLA. Diese wurde in Häcker-Küchen und von anderen Küchenherstellern in Schubladen verbaut. Die Schienen sind nur noch selten gegen gutes Geld oder vielleicht…
Mount for EHEIM autofeeder+ to mount on Juwel auarium in basic place. Print in 2 parts. No support need Current setup: EHEIM autofeeder+ and Juwel Rio450
![[OEJL] TwistOff Jar Lid Collection - Parametric](https://media.printables.com/media/prints/f12fa77b-0858-443c-9ec4-de8ed4a9d41b/images/12091098_f339ee7a-0aa2-4cea-9910-53c967c296d8_b1dfc7fc-7c99-4afc-a76d-5514430fbfef/gmail_images20260218_221923.png)
