1 / 5
Tofu60 (Redux) Wrist Rest
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A perfect fitting wrist rest for the Tofu60 (Redux) with cutouts for rubber bumpers.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 142
- Makes
- 0
- Views
- 2,605
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Jakeu's Tofu60 (Redux) Wrist Rest
IMPORTANT:
- In order to print this model, you'll need at least 256x256x80 mm of space on your bed
- You'll have to install 3M™ Bumpon™ SJ5344 rubber bumpers (19.1 x 4.1 mm) for it not to slide on your desk and match the height of the Tofu60 Redux
- Optionally, this could be printed in TPU for added comfort
Models
There are two versions available:
- Jakeu Edition (my lettering on the front)
- Blank (no design)
Printing Instructions
- 0.08 mm layer height for the cleanest look (optional)
- Tilt the model and add supports as shown on the pictures
- If you still don't know how to print it, refer to the .3mf file
Finishing Instructions
- Mask with putty to hide print lines (optional)
- Sand down with 400→600→800→1200 grit sand paper
- One coat of plastic primer spray paint (white primer for the most pop on the colour)
- Two to three coats of colour spray paint
- Two to three coats of clear coat spray paint
- Cure for at least 2-3 days since it will get a lot of skin contact
Made by Jakeu - https://jakeu.gg