Counting matching models…
🇺🇸 Welcome to Cincinnati, Ohio! ⚽ 🏟 TQL Stadium is a soccer-specific stadium in Cincinnati, Ohio, United States. It serves primarily as the home stadium of FC Cincinnati of Major League Soccer since May 2021. The stadium cost about $250…
Replaces 1 AcuTight cradle for your Thule roof-mounted cargo box 8523387001 Replacement Thule Snap Fit Cradle for AcuTight Mounting Systems on Thule Roof Mounted Cargo Boxes Print was made with petg-cf with 0.2 strength profil
This is a replacement cover door for the standard traxxas TQ transmitter remote. Remixed from torula to have a flat bottom and sized correctly for my remote. The original was too long and too thick. Width was pretty spot on. It's in the…
Hi I made very simple wall mount for the traxxas transmitter. Enjoy!
Simple ring for one hand/thumb steering with original Traxxas TQi remote control
This is an easy-to-print, easy-to-use one handed adapter for your Traxxas TQ or TQi transmitters. I recommend printing it with three wall loops and with 25% infill. Enjoy!!
Sklopný držák mobilního telefonu pro vysílačku traxxas, u mě vozidlo defender TRX4. potřebný spojovací materiál: Čtverhrané matice se musí přímo zatisknout do stavěcích šroubů. edit 9.1.2025: přidán model stavěcích šroubů pro vložení…
TQI Transmitter wall mount (holder) for mounting via screw or sticky tape RC transmitter to the wall for storage. This is sized for Traxxas TQI transmitter, it may fit other transmitters, but not guaranteed. I made another model, for…
VIDEO VIDEO high viscous fluid with particles Pump for broad range of speed and viscosity - easy to clean, works for water, oil, resin, soap, lather, slurry, cream, gel, ointment or silicone and paint. Or as kinetic sculpture/demo/fidget.…
LICENSE Copyright © Herr Brain 2023. This source describes Open Hardware and is licensed under the CERN-OHL-P v2 . You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-P v2…
Replacement compound gear for an Intek TQ81Bc paper shredder 7T Straight Press = 30-deg module = 1.61 36T helical, 15-degree Press = 20-deg module = 0.82 FreeCAD file included When printing, you could slice the bottom of the model at…
If you need to mount a GoPro (or any other camera) on your Traxxas TQi controller get that model and print it out! The camera mount is at 30° angle to let you navigate your RC model freely. I've tested it with GoPro 11 and 11 mini - at…
Espero que les guste :) . Pueden imprimir con los parámetros que gusten. La idea es pintar las lineas con pintura.
HIKMICRO TQ35 2.0 Honeycomb 6mm or 5mm killflash no need to put down lens cover used screw M3x40 + nut Print settings: 0,2 mm layer 8 walls no supports
A couple of first attempts at a case for the DTQSYS Head tracker . One version can be secured with servo screws. Might need a slight adjustment to the length of the lid pin that activates the calibration button.
Quick redesign to Dopins' Supermicro caddy, just adding a bit more clearance around the SATA/SAS ports to avoid some interference with the backplane connectors. Follow the original printing guidelines. 0 tops, 0 bottoms, 8% honeycomb…
Aerozono Space Technologies BS-1 Fully printable PocketQube Tech Demonstrator Two Award winning design at the Latin American Space Challenge (Award For Innovation and 1st Place in PocketQube ) This is our Webpage . Preliminary Design…
Initial version of the case, ideally you should have 6x6x8 tactile switch. Most likely, one of the lips holding the switch will fall off when you try to install it, this is something that I need to eventually fix. However, one lip can…
Ein Gehäuse für das recht große Pappgehäuse der Franzis CO2-Ampel / Luftqualitätsmesser https://www.franzis.de/maker/bausaetze/luftqualitaetsmesser-bausatz Für die Montage werden 6x M3 Schrauben (+ die vorhandene Schraube für die…
Many DIY microcontroller projects require to program / flash the uC (e.g. with a bootloader) before it is useable in the circuit. Smaller PCB often don't give the chance to access the uC chip at its ISP pins for flashing easily, so the…
The fan of my IKEA Vindriktning started to make too much noise, so I thought I'd give it an upgrade with a PMS7003 (I got this one: https://a.aliexpress.com/_EwyICG6 ). unfortunately, it didn't fit in the original casing, So I designed a…
When planning the button panel layout, I decided to add a panic button like the one on the Thrustmaster TQS. Since I had already printed all the parts before adding it, I designed it as a sliding part. For efficiency, it can also be…
If you need to mount your phone, camera, or any other device on your Traxxas TQi controller get that model and print it out! It's a popular mount used for offroad devices, phone holders for bikes, motorcycles, etc. The ball mount is at…
After replacing my brake discs with such that are only available as a 6-bolt version which forced me to use an adapter, the original part of the magnet mount would grind on the frame of my bike so I designed this replacement part with…
Print in separate parts then assemble with super glue. Supports required. Model is 1:1 scale, resize required. Photo is at 3% scale.
I used these: Thank you, MRiscoC. Take the Phone_holder_mounting and attach the screws like on the diagram, then take the Phone_holder_main and attach it with the screw. Fits iPhone 16, 15, 14, 13, 12, and 11 Pro and normal.
This is the ALTN Pitch Trim Lever for the PMDG 777-300ER MSFS 2020. Made for the Thrustmaster Bravo Throttle Quadrant. Fits great works great, enjoy.
Remixed this VTX antenna mount for CraftQuads LoFlo frame Category: R/C Vehicles
This wall mount is for the SmartQ H302S USB 3.0 Hub. Amazon.com: SmartQ H302S USB 3.0 Hub for Laptop with 2ft Long Cable, Multi Port Expander, Fast Data Transfer USB Splitter Compatible with Windows PC, Mac, Printer, Mobile HDD :…
Magnets can be helpful if you don't want to lose body pins during maintenance or a battery swap. You can glue magnets on the inside of the body, you can also add them to your transmitter. This is a simple design to add magnets to the…
As I replaced my TQ steering wheel with a thumbsteering, I had a leftover wheel. So I designed this stand, but with interchangeable mounting inserts so that you can display not only a TQ wheel but also a car wheel with 7mm or 12mm hex.…
Made this because I didn't like the card reader just hanging from the top of my computer's USB port. This is a simple two-piece mount that the reader sits in, is bolted together, and mounted to the underside of the desk. I designed this…
Wanted an easy way to see the status of the printers in our small farm. All the data is available in our Home Assistant instance via Octoprint, and I had a spare Kindle Fire 7 to use as a display. We manage our farm via an old Mac Mini…
Traxxas TQ series lanyard loop hanger Easy to print, no support Use TPU with 100% infill
Although I love working with Supermicro hardware, I wanted to replace the stock fans for my mobile racks CSE-M35TQB and CSE-M28SAB with Noctua fans, with the goal to make my self build NAS a bit more quieter. The stock SM fans comes with…
Das Modell kann in Tinkercad bearbeitet werden. ( https://www.tinkercad.com/things/h7BJmVUW4dn ) Der Code dazu findet Ihr in Makecode. ( https://makecode.calliope.cc/_PyoL2CHwtfWm ) Benutzte Hardware: Calliope Mini (…
I would appreciate any donation. https://www.paypal.me/JanSkvor
A quick release plate to easily remove your throttle from your cockpit, for the Thrustmaster TQS. For those like me who have a single sim rig for flightsim and simracing: Driving with a Throttle hitting your elbow sucks! So I…
This universal connector allows the use to connect any compatible accessory to a mounting point with a thickness of at least 2mm (aka the maximum thickness of iPhone cases for Magsafe compatibility). There are two options available for…
DTQSYS Head Tracker Case for DJI Goggle N3 Printed with petg, 0.15mm layer height, 0.4 nozzle, with supports.
This is a 3d printed adapter to attach the Thrustmaster Viper TQS throttle to the Wheel Stand Pro desk. You need: the 2 3d printed parts some bolts or screws, nuts and washers some adhesive pads The new Thrustmaster Viper TQS throttle has…
This is just a simple case for the avr-tqfp-programmer made by Hazar Karabay: https://github.com/hazarkarabay/avr-tqfp-programmer Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0.4 Infill: 15%…
Saw the idea in a video so I made one in free cad. I made one with recessed writing for front and one for rear diff lock configurations. To install you just remove the little nut, put the cover over the switch then reattach the nut. If…
Habe die Schelle mit einem Resin Drucker gedruckt. PETG geht auch, ist aber schwierig mit den dünnen Stegen welche die Knopfgummis Halten.
I shrunk the model a bit and got a box for TQFP32
Support me and check out the files in Cults3D https://cults3d.com/en/3d-model/gadget/atr-72-600-s-parking-brake-saitek-tq-fit This is a highly detailed 3D-printable parking brake flight simulation device designed specifically for the ATR…
Replacement Vitamix TQO Motor Plate Gasket Service Kit - 060065 Printed with TPU 95A 15% infill
Support me and check out the files via Cults3D Link: https://cults3d.com/en/3d-model/gadget/atr-72-600-s-gust-lock-saitek-tq-fit This is a 3D-printed gust lock simulator specifically designed to replicate the behavior and look of the ATR…
This is my entry for the Printables-Contest Thrustmaster Custom Shifter Knob Function The QUESTMASTER TQ3S replaces the shifter-knob of a Thrustmaster TH8S with a Meta Quest controller to add the following functionality to a sim racing…
As I replaced my TQ steering wheel with a thumbsteering, I had a leftover wheel. So I designed this stand, but with interchangeable mounting inserts so that you can display not only a TQ wheel but also a car wheel with 7mm or 12mm hex.…
A quick release plate to easily remove your throttle from your cockpit, for the Thrustmaster TQS. For those like me who have a single sim rig for flightsim and simracing: Driving with a Throttle hitting your elbow sucks! So I…
DTQSYS Head Tracker Case for DJI Goggle N3 Printed with petg, 0.15mm layer height, 0.4 nozzle, with supports.
It is an extremely tight fit, so be careful putting the winch in. It clips on the top of the remote like in the picture.
Had trouble finding the teeny tiny default flap handles in VR by feel. So I made this large one in airfoil shape, inspired by the 737. Printable without supports in the provided orientation.
Vorterant inline flow converter with 4 rotors and one progressing cavity. Using ∅2mm steel shafts.
4 Screws M3 50mm needed. 3mm input shaft Holes need to be reamed for smooth surface. Fit into ∅ 50(+)mm hole;
This is a printable model od processor in TQFP52 case Printing times with structure - 79g : 3h26m = MK4 4h44m = MINI/+ 6h41m = MK3S/+ Printing times without structure 67g : 2h37m = MK4 2h59m = MINI/+ 4h53m = MK3S/+ Version 1: Processor…
![[v2.2] QtQwiicCliq - DIN mount for Stemma Qt/Qwiic/Thing Plus/Feather/Raspberry Pi Zero](https://media.printables.com/media/prints/512753/images/4155220_203b39bf-2534-4a34-bd72-fcf5323b0e6e/pxl_20230625_030245459.jpg)
