52 models
This model allows a mounting of the Kistenberg's TRUCK STORAGE BIN 12 (KTR12) on perforated wall steel plates produced by the Element System. The KTR12 box:…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
This model allows a mounting of the Kistenberg's TRUCK STORAGE BIN 16 (KTR16) on perforated wall steel plates produced by the Element System. The KTR16 box:…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
This is replacement handle for the Bessey GTR 120/60 Guide Rail Standard Clamp (seems to be identical to Bosch Professional clamps for the FSN 70 or FSN 140). The original handle is simply round and therefore has very little grip. So I…
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
The steering cylinder on a Garmin TR1 autopilot needs to be cushioned with little plastic bushings so as to prevent metal on metal and the associated corrosion that comes with that. The original bushings are hard to get. Use the slicer…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Lara Croft turned gold in the iconic Palace Midas death cutscene.
Upgrade your Ryobi RTR18-0 Cordless Trim Router with this handy adapter plate! Now you can achieve perfectly straight cuts by attaching your router to a Festool rail system. Key Features: Precision fit for the Ryobi RTR18-0 (Bare Tool)…
Remixed from Giobby66 magazine, set to size and added cutouts for fitment to be used as a tool. It is a non working magazine, only for display, stand, vise block, or dummy mag Print Settings Printer Brand: Creality Printer: Ender 3…
This will clamp onto anything that is about 31.5mm X 56mm, at a 14 degree angle, and has totally rounded edges (like the arm of the TR150 treadmill). It is made to attach to the right (starboard) side of the treadmill from the perspective…
A small RC Truck in 1:24 scale. It can drift and is quite fast. This is just the .STEP for tinkering around, not a fully fledged model ready to print. Enjoy.
Used @quirtz great parameterized plug to create an exhaust plug for washing a Yamaha TTR110 without getting water in the exhaust. I used ASA and fuzzy skin give it a little more grip but smooth and PLA should be fine. Both codes attached…
Idea behind the design was that adapter should sit tightly without usage of any magnets or screws, and the lens should not fall when adapter is installed or removed. The adapter has an insert that fits into a groove and firmly holds the…
Print in 100% (PLA) for strength.
Support Do you like this design? If so, consider buying me a coffee – it would truly make my day! PX21 / TR133R / V21PX / PX-21 / UG-523 Battery Adapter (for Praktica) This is a battery adapter designed to replace the discontinued PX21 /…
Easy printable dividers for Kistenberg (Prosperplast Brand) Truck storage bins 4" KTR12 115x80x60mm 8" KTR20 195x120x90mm Printing instructions: 0.4 nozzle 0.2mm Speed no Supports
A remix of a very nice IEM case from @KnifeLover_2335150 with larger dimensions! This remix require 6mmx3mm magnets instead of 6mmx2mm in the original Both a regular case and a case with a divider have been included in the remix. The…
This is a remix of https://www.printables.com/model/532599-anbernic-rg505-grip, thank to Amoory for this design ! 15/09/2023 : Uploaded KTR1_grip_v3.stl file. The sharp angle near the joysticks have been cuted out. Print it as it come,…
This is being used in my small camper to help monitor my Lifepo4 battery. I printed in ASA and found best to print with top down and use tree supports.
Should of course also work on T30/T40. Print the two parts and screw them on the rails of the T50RP. The screw hole has a diameter of 2.5mm. Works well with a ~12cm 90deg to 0deg 3.5mm cable between Fostex and Fiio.
Base for the radio receiver Retekess TR110 with a small angle for comfortable viewing of the screen
This is a holder to attach Fiio BTR5 or BTR15 Bluetooth amp to AKG headphones. Comes with two different attachments, one for K240 and another for K712. Those are the models I've tested this with but should fit other models with similar…
A protective case for your beloved KTR1 handheld. Should also work with the joystick top configuration. Just slide the KTR1 in it then toss in your bag. It also double as an uncomfortable grip if you really want to.
Best printed on the side with support everywhere.
The belt clip supplied with this Reketess radio is tiny and very flimsy. This replacement clip fits nicely and uses the same screws. Print on its side at 100% infill with supports for maximum strength. It may need a little tidying up…
I was in need of mounting brackets for Kistenberg Truck storage bins KTR12 and KTR20 and found the version of Vookimedlo quite usable. The mounts should fit to the Element System wallpanel or any panel with 45mm distance between the…
Foot for Technics cassette deck.
EDIT: The first version I uploaded should work with a bit of filing or sanding. The issue is that the thread engaged into the carburetor is too long. The base of the thread sets the most retracted position of the choke needle. Mine pushes…
Stand for use with a laptop or cellphone on the XTERRA TR150 treadmill. with laptop I use it with walking speeds. the device can hide the machine LCD. 2 stands needed. Printed on PLA has worked out well.
I designed this case riser for my Thermaltake TR100 to improve cooling and also direct the air out on a specific side. I felt there was a lot of “stagnant” hot air below the case which often was blew towards my keyboard and it didn't feel…
Simple cupholder for Track Racer TR40 - TR160 simracing rig. It will fit in any 40mm/M8 aluminum profile. You need one t-nut and M8 bolt to attach it.
Mill perfect circles or arcs with a circular guide rail for your Ryobi RTR18 I just made this because I thought it would be a fun thing and hope someone in this world needs one! :-) I provide a few different sizes 250, 300, 400, 500, 600,…
The LifeSpan TR1200DT is an older generation treadmill for walking desks. It has two leveling feet at the front, which consist of a metal core and a plastic puck. The original ones seem to be cast, and might have been rubbery, but turned…
Case for the FiiO BTR17 . Version 1.2 - Optimised latch and 3D model cleanup. Unlike the included case, it is designed to latch onto the device, reducing the risk of the Portable Bluetooth Dongle/DAC and Amp falling out. This has also…
This Support with Insert M6 for Ø12 mm Optical Post (TR150/MJP, Thorlabs) is designed as a cost-effective replacement for the metal supports typically used in the Motorized Optical Mounts/Stages project by n.leinad. Made from PLA, it…
This is a small remix of bed holder bracket to enable usage of Igus RFRM-2525TR10x2 There are two versions with only 0.4mm difference in hole diameter just to be safe. I tested "tight fit" one and works great. Post-Printing Components are…
A quick CAD model of the TR16 screen and 100A shunt Category: Electronics
Bonjour, Pour passer le temps, je ne fais pas de ronds dans l'eau, mais des ronds dans le bois. Ce pivot va vous permettre de faire des ronds de 16 cm de diamètre. Celui se monte à la place du guide de l'affleureuse. Il utilise les deux…
Use your RYOBI RTR18 with your DeWALT Guide Rail and get a straight line without problems Three different sizes depending on the size of the router tool. 90, 95 and 100 mm from inner edge of the Guide rail to the center of the tool (see…
I needed a wireless charger in my truck. It's a 2015 Ford F150 with a Maestro FTR1 dash kit. This thing goes in the pocket where the climate control used to be. Requires an Anker Powerwave Pad ( https://us.anker.com/products/a2503 ), and…
Take off the original stand. There are four screws on the side of the base. Print the model with no supports with the material of your choice and any layer height. The model is supposed to be a friction fit and is non-distructive, meaning…
Sonderschraube Variogewinde TR4 bis TR11 x3 SW 13, 15, 17 Für Verschraubungen, bei denen das Innengewinde nicht genau bekannt ist. Custom screw variable thread TR4 to TR11 x3 AF 13, 15, 17 For screw connections where the internal thread…
certaines jantes ont un trouve valve de 15mm, et la majorité des chambres a air ou valves sont en 13 mm. cet adaptateur permet de monte une chambre a air avec valve de13 mm dans une jante en 15mm (jantes aluminium par exemple) some rims…
CopyRings for you RYOBI RTR18 Print the desired CopyRing and screw in place, use the tool if you want The following sizes are available Outer diameter (mm) Inner diameter (mm) 17 9 20 12 24 16 27 19 30 22
This custom-fit organizer is the perfect companion for your Canon PIXMA TR150 Wireless Portable Printer. Designed specifically for a travel carrying case sized 14.2in x 13.2in, it provides a neat, compact solution for storing all the…
When converting a Ryobi RM480e/RM480ex riding lawnmower to lithium batteries, a replacement battery gauge is needed for accurate charge information. The TR16 (w/ a 100A shunt/sensor) is a good choice, but it needs a slightly larger…
This USB Dongle Organizer / MicroSD and SD card holder will fit snugly on the side or top grills of Thermaltake's TR100. IF they fit on other ThermalTake cases, Let me know! I'm including the STEP file of the grill pattern in case you…
Used to convert to the newer, cheaper and better available STR3 and STR4 boards. Can be used to convert WMMT3 cab to ES3
Travel case for the portable router Cudy TR1200. Didn’t bother with hinges or latches—just a simple, (very) thin box. Width = 124mm; length = 84mm; height = 32mm.
Simple cupholder for Track Racer TR40 - TR160 simracing rig. It will fit in any 40mm/M8 aluminum profile. You need one t-nut and M8 bolt to attach it.
Travel case for the portable router Cudy TR1200. Didn’t bother with hinges or latches—just a simple, (very) thin box. Width = 124mm; length = 84mm; height = 32mm.
This is being used in my small camper to help monitor my Lifepo4 battery. I printed in ASA and found best to print with top down and use tree supports.
![Support with M6 metal Insert hole for Ø12 mm Optical Post 150 mm lenght [TR150/MJP, Thorlabs]](https://media.printables.com/media/prints/984872/images/7505863_231d6677-86a6-4e3b-80a6-7f7d43a6c534_5ae267cd-875c-4ede-b1ee-582f59024292/support-with-insert.jfif)
