P
PrintablesEd van der Heijden
Triumph TR2 year 1954 Designer Ed van der Heijden.
Triumph TR2 year 1954 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
- Downloads
- 232
- Likes
- 72
- Rating
- 5
Search results: tr2
Counting matching models…
P
PrintablesGianlu
Olympus TR2 replacement
A simple 1/4" 1/4-20 UNC female (camera mount) to M5 male thread adapter. This part gets lost very easily but it is required to fix Olympus LS-P2 to a tripod. Tested with PLA and it is strong enough to support the voice recorder. Of…
- Downloads
- 115
- Likes
- 2
- Rating
- 0
P
PrintablesDingo
Microphone audio shield and pop filter mount for Audio Technica ATR2500USB+ (May suit others)
Mounted using some thin stick backed foam alone the inside of the parts. The pyramid grid (can't recall the proper name) is printed thin enough along the base that you can double sided tape the back of it and roll it in. Recommend coating…
- Downloads
- 78
- Likes
- 11
- Rating
- 0
P
PrintablesEd van der Heijden
Tricycle Triumph TR2 (5e of 5 models) Designer Ed van der Heijden.
Tricycle Triumph TR2 (5e of 5 models) Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
- Downloads
- 73
- Likes
- 22
- Rating
- 0
P
Printableslemonhead
Macro lens adapter for Mileseey TR190i / TR256i
Idea behind the design was that adapter should sit tightly without usage of any magnets or screws, and the lens should not fall when adapter is installed or removed. The adapter has an insert that fits into a groove and firmly holds the…
- Downloads
- 72
- Likes
- 5
- Rating
- 0
P
PrintablesPLAPadawan
Microphone Audio Shield and Pop Filter Mount for Lots of Microphones Including Audio Technica ATR2500USB+ OPTIMIZED
Microphone Audio Shield and Pop Filter Mount for Lots of Microphones Including Audio Technica ATR2500USB+ OPTIMIZED. This model is perfect for keeping other sounds from getting to your microphone and is a pop filter. Pop filters help keep…
- Downloads
- 62
- Likes
- 34
- Rating
- 0
P
Printableshachleitner
Partitions/Dividers for Kistenberg Truck storage bins KTR12 KTR20
Easy printable dividers for Kistenberg (Prosperplast Brand) Truck storage bins 4" KTR12 115x80x60mm 8" KTR20 195x120x90mm Printing instructions: 0.4 nozzle 0.2mm Speed no Supports
- Downloads
- 53
- Likes
- 3
- Rating
- 0
P
PrintablesGoldenBoyGarage
XT225 TTR225 Chain Slider 1KH-22151-00-00
Deets The chain slider on our beat up old XT225 finally gave up the ghost. Ive been wanting to fix it, but it gets ridden a lot. Thankfully the old one broke off so the swing arm didnt need pulled. This model omits the angle for the…
- Downloads
- 50
- Likes
- 5
- Rating
- 5
P
PrintablesSteveW91
Lens Cover for Mileseey TR256E Thermal Camera
Protective Lens Cover for Mileseey TR256E Thermal Camera
- Downloads
- 44
- Likes
- 3
- Rating
- 0
P
PrintablesThechopsee
TR4 to AM4 conversion kit for ENERMAX ELC-LTTR240-TBP LiqTech
TR4 to AM4 conversion kit for ENERMAX ELC-LTTR240-TBP LiqTech. Best with PET or PETG.
- Downloads
- 40
- Likes
- 1
- Rating
- 0
P
PrintablesSteveW91
Screen Cover for Mileseey TR256E Thermal Camera
Protective Screen Cover for Mileseey TR256E Thermal Camera
- Downloads
- 32
- Likes
- 1
- Rating
- 0
P
Printableshachleitner
Element System mount for Kistenberg Truck storage bins KTR20 & KTR12
I was in need of mounting brackets for Kistenberg Truck storage bins KTR12 and KTR20 and found the version of Vookimedlo quite usable. The mounts should fit to the Element System wallpanel or any panel with 45mm distance between the…
- Downloads
- 30
- Likes
- 3
- Rating
- 0
P
PrintablesSteveW91
Multiboard Holder for Mileseey TR256E Thermal Camera
Multiboard Holder for Mileseey TR256E Thermal Camera
- Downloads
- 24
- Likes
- 7
- Rating
- 0
P
Printablesyvautrin
Turn lights (indicators) for Yamaha TTR250
This is my take in designing turn lights for a Yamaha TTR250. They need to be printed in two parts (body and cover), and mirrored for L/R indicators. This design has a 12mm hole for bulb fitting. No Support required 0.2mm layer 0.4mm…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesPositronixXx
Cover piece for Verdemax TR20 trimmer
cover piece for the trimmer TR20 it fits like a glove. Highly recommended PETG or more durable material like ABS. print with support, brim is recommended. Uploaded the v2 model, with better strength.
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesBakermonitor1932
Holder for Mileseey TR256E Thermal Camera
Removed the multiboard mounts, so it could be screwed to a wall. Removed the multiboard mounts, so it could be screwed to a wall.
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesMatthew Cocuzzo
MyLaps TR2 Transponder & Charging Base GridFinity Storage
Gridfinity storage for a MyLaps TR2 transponder and its charging base. Charging base fitment is snug (I shaved some excess flashing off of my charging base to make the fitment a bit nicer) but both are held securely in place. Gridfinity…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesleoooo
Petcock knob for 1989 Honda VTR250
Didn't have the original so I designed it from scratch to fit an aftermarket petcock. The square hole in the bottom is 7.75mm. No promises that it'll fit OE or your aftermarket one though, so measure it first. I can modify the file if you…
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
PrintablesValar Orome
Microphone clamp for ~32mm microphones (e.g. audio-technica ATR2100x-USB) with 3/8th inch mounting thread
What is this It is a clamp suited for my ATR2100x-USB (32mm diameter) microphone. The clamp fits on a microphone arm with what I think is a 3/8" thread. It is a very tight fit. Don't print this with materials that are prone to snapping. I…
- Downloads
- 5
- Likes
- 3
- Rating
- 0
P
Printablesmquez
radio spare for team associated dr28, f28, hr28, sc28, tr28, cr28, mt28
just the spare for the steering part of the radio
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
Printables
Holder for Mileseey TR256E Thermal Camera
Removed the multiboard mounts, so it could be screwed to a wall. Removed the multiboard mounts, so it could be screwed to a wall.
P
Printables
radio spare for team associated dr28, f28, hr28, sc28, tr28, cr28, mt28
just the spare for the steering part of the radio
P
Printables
Ryobi R18TR2-0 Trim Router Base and Handle
Make sure you do a layer pause on the handle so you can drop in the M4 nut. This is pretty close to the Ryobi green if you want that “authentic” look. https://www.amazon.com.au/OVERTURE-Filament-Cardboard-Dimensional-Accuracy/dp/B0CQ29VNJH
P
Printables
Battery add on for the Lynovation CTR2-MIDI and CTR2-Micro
Updates March 2025 I've added v14 of the case which includes the following minor improvements: USB cut is larger to accommodate chunky cables. The switch cut on the underside is a lot tidier. The battery/board separator has been filleted.…
P
Printables
CTR2 Dial - Case
This is my design for the Lynnovation CTR2-Dial. High quality prints of this. alongside the required components are avalable from g7ufo.radio and Lynnovation .
P
Printables
Honda VTR250 Fork Leg Guards
Stone chip and bug splatter guards for Honda VTR250 motorcycle front fork legs. Protect the shiny inner stanchions from chipping and pitting resulting from stone impacts or bug splatter left to corrode the hard chromed finish, resulting…
P
Printables
Sony KV-13M10/KV-13TR28 Front Input Door
Replacement door for 13" Sony Trinitron TVs. I think it would only fit on KV-13TR28/KV-13M10 models. I printed mine with Polar Filament's Power Gray, it's a pretty close match. Designed for PLA. Print long-ways up
P
Printables
Harbor Breeze - Ceiling Fan - Wall Remote Holder TR258B
While replacing my Ceiling Fan I noticed that my double gang outlet box only really needed one switch for power while everything else is controlled by the remote so I made this remote holder to take the place of the blank switch location.…
P
Printables
Team Associated TR28 AND NanoSport Upgraded Wheels
More squish = More traction If you have the TR28 wheels, you can use the Nanosport street tires since they are the same size. Make sure to chase with a 2mm drill bit.
P
Printables
TR2-X Alex Wings
Just the wings, ma'am. If you want the whole thing, you gotta buy the Wraith from CGL like I did. I had the base miniature kicking around my pile of shame for a year or so and I had no idea what to do with it. When I learned about the…