1 / 9
Battery add on for the Lynovation CTR2-MIDI and CTR2-Micro
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Unlock truly wireless operation of the CTR2-MIDI (or reduce need for a power connection when using the CTR2-Micro).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Updates
March 2025
I've added v14 of the case which includes the following minor improvements:
- USB cut is larger to accommodate chunky cables.
- The switch cut on the underside is a lot tidier.
- The battery/board separator has been filleted.
---
Please checkout the post on my website for a bit of background on the case.
Printed and constructed cases can be purchased from my shop.
Parts
You will need the following:
- 1x Printed case (see files below)
- 1x Seeed Studio Lipo Rider Plus board
- 1x LiPo 3.7V Lipo Battery (max size 29.5x11.3x47mm)
- I have used the EEMB 1400mAh 112945 in my build.
- VERY IMPORTANT: Check the polarity of the connector on your battery, against the connector on the board - I had to swap mine around.
- 1x USB-C cable with bare ends (only power required)
- 1x SS12F15 1P2T Miniature Vertical Side Switch (size 19.7x5.8x8mm)
- 6x M2x4mm screws for mounting the switch and the board to the case
- 2x 40mm lengths of cable (connecting the switch to the board)
Let me know if you'd be interested in a kit of this.
Construction
The last few pictures show the connections.
- The switch is connected to the board at pins EN/GND
- The USB-C lead is connected at pins 5V/GND