1,501 models
Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Turn off arachne mode! Discover the Triangle Fidget Toy , a mesmerizing gadget designed for endless fun and relaxation. With its unique triangular design, this toy stays intact while allowing creative play in both 2D on a flat surface or…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
A five-sided shape made of equilateral triangles and squares.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Remix of the Hazard Triangle Holder for BMW I3 Trunk. https://www.thingiverse.com/thing:4671592 Things Changed: Optimized Screw Holes for longer Threads to fasten it Added a Hinge and a flap to secure the Hazard Triangle in the Holder…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
To attatch Nanoleaf Shapes Trianglles with screws. After the Nanoleaf Support stated I should use a ruler to make drill holes for the Triangles I construct this drill template. Print with support! Printer: Artillery Sidewinder X1…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
Dans la Pédagogie Montessori , Les triangles constructeurs bleus sont destinés à l’expérimentation sensorielle de la géométrie en 2-dimensions. Ce matériel se présente en une série de douze triangles rectangles identiques, dont les angles…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant
Oscillating Triangle Sandpaper Holder: This is a remix of a design I found on Thingiverse. However, I completely redrew it and added the following: Increased wall thickness/rigidity from 1mm to 3mm Made stackable with posts on lid and…
Print approx. €7.45–€9.11 excl. taxPreliminary estimate for PETGSource material: PET
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Articulated Triangular Prism , a charming geometric toy with moveable legs and a sleek triangular design. Perfect as a desk accessory…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
I've designed these Soft Rounded Triangle Plant Saucers to add a touch of elegance and functionality to your indoor gardening setup. With their triangle shape, soft rounded corners, and curved sides, they offer a unique aesthetic that…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for PETGSource material: PET
This cookie cutter attempts to take us one step closer to infinite cookie edges through the use of fractal technology. I have included two size variations, one large cookie size (~95mm) and normal cookie (~77mm) sized cookie cutter and…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
This is a pendant with space for three tritium vials. Print instructions This is a pendant for a total of three green 2 mm x 12 mm tritium vials. The vials themselves are glued in with clear epoxy and glow dimly in a darker environment.…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Based of a design I remember when I was a kid. See drawing for measurments. Please share your makes Thx.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
A connector to make a triangular prism out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
22.5 degree builders triangle Originally designed just as a rough guide for cutting cable tray at 22.5 degrees. Long slot is for a handle. Includes *rough* ruler denominations/increments (accuracy is printer dependent, and the slots…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for PETGSource material: PET
I remixed one of the extruder visualizers by Prusa to add a slot for a 5x5mm magnet, to be inserted while printing so you won't be needing glue. Pause your print at the correct layer in PrusaSlicer! The provided gcode file already has a…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Broche nudo infinito Triangulo
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
“Hey dad, I want a cannon so I can shoot bad dreams away”. “That's a great idea!" --Three hours later-- "Here, son, look at this amazing cannon that i found and printed!” “Great! I want seven of them! - but small enough so i can put them…
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
Dvě varianty, jesna s možností přichycení
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
A nice and quick pot/planter for your lovely plants! they will love it for sure We suggest printing it in a dubble layered vasemode - the outcome is nice and rather quick :D Happy printing! :D
Fun toy to play with. Triangle columns jointed together can slide up and down. The model is printed in one piece. No special settings/Supports required. Infill 5-15%. Layer height 0.2mm or less. Model on photos was printed with Bambu Lab…
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
This cartridge nozzle set includes three different nozzle designs for 1K cartridges , allowing clean and controlled application of adhesives and sealants. The nozzles screw directly onto the cartridge and cover a range of use cases — from…
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
Painters triangle (or painters pyramid) for holding work off a surface while applying paint or finish. Can fit at least 8 on a prusa mini at a time. They print quickly and easily. Triangles are also stackable for easy storage.
A fully parametric polygon fidget. Printing tips: Decrease the printing speed Decrease the cooling fan's speed For a robust handle use 3 walls Ensure a good bed adhesion How to customize your own? You will need to download FreeCAD , a…
What makes it special This triangle version takes the BEST passthrough idea into a three-sided shape, and its structure runs smoothly once the pieces are set up right. It prints with a structural design that helps the print go smoothly,…
A new take on my previous design - i changed it into two vases. They fit well togheder especialy printed in two diverent fillaments. Easy to print in vase mode (1 or 2 layers) - filament PLA/ASA Happy printing! :D
Check out some of my other fidget keychains! Captain America Gyro Fidget Square Gyro Fidget What shape is superior to the square? Here are four different sizes that print quickly and are a lot of fun to fidget with. They'll make a great…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
TriangleLab Bowden Tube Clip, 1.5mm thickness. Edit: Added another version 1.6 mm thickness. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 10 Filament: SUNLU PLA+ White Category: 3D…
electric cabinet key (triangle)
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
A simple little puzzle - nothing special but I find myself fidgeting with it when I'm doing other things - hence the title. You'll need to print three of them and they can be made of anything - in the images above I have Silk, Tri-Silk,…
This is a remix of my popular Honeycomb Shelf Bracket ! I added a voronoi and a triangle pattern. The shelf bracket has the dimensions of 240 by 200mm. Take the long or short side up. You can also simply scale the shelf bracket. The holes…
Učebná pomôcka. Pre úsporu materiálu je 5% výplň.
Hi everyone, I created this model to use as a climbing finger strength trainer at home or hung from a tree at the crag! It features 5 different ways to train and warm up: 20mm edge 25mm edge 15mm crimp Single finger mono Pinch/Jug…
Printed with flexible filament, this triangle purse uses its geometry as a mechanism for semi-sealing the bag. It is a self-standing piece. The chain links come together to create the straps for the bag making it possible for the strap to…
This is an expanding mechanism: it goes from small to big, and it has one degree of freedom. In the first photograph, the two triangles are identical copies of this mechanism. The green triangle is fully expanded, while the white triangle…
As some of you asked - we made the cilinder shaped triangle pot into a V shaped one! We hope you will enjoy it as much as we do :) Simple remix of the Tradicional Triangle Plant Pot and Planter Best to print in 2 or 3 layered vase mode…
Triangular Wall Art - Mountains Designed for room decoration. Designed for easy print with no supports and with light body. Paramenters: X: 220 mm Y: 200 mm Z: 2 mm (minimum thickness) - can be printed in every type of filaments -…
A fidget toy to always have at hand. Simply print it in less than 15 minutes and attach it to your key chain to always have it with you! Features Simple to print A cool-looking fidget toy Prints in less than 15 minutes No supports needed…
This is NOT my design, but I cannot find this back on thingiverse
Universal Triangular Access Key for Utility Meters and Control Cabinets. A durable and reliable tool designed to easily open technical enclosures, gas meters, electricity panels, and water valves. ⚠ CRITICAL PRINT NOTE: Do NOT print this…
Update 12/12/2025: I adjusted the bottom part (the pins are slightly narrower and there are four of them). I made the top part a millimeter deeper overall, so that the display should be better protected. Update 09/14/2025: I adjusted the…
I created a OpenScad Painter's Triangle for elevating an object while painting. I provide a minimum contact to the object. It is also stackable. The OpenScad code allows you to customize the height and width the triangles. Enjoy. 4may19:…
This is a small and simple triangle key for opening the outside door of an elevator shaft. As i did an internship at an elevator maintenance company when i was in highschool I know my way around an elevator reasonably well. Since i lost…
Triangle Filament Clip (Based from K2 Clip) The clip can be left to "float" on your filament spool while printing. Three identical anchor points to facilitate the installation of the clip. The solid form is easier to print if you have…
A Triangle Grip and Screws for M4 Style Rifles that use the M-Lock System Works really well on my Novritsch SSR4 DONT TIGHTEN THE SCREWS TOO MUCH OTHERWISE IT WILL CRACK! My Print Settings: Layerheight: 0,25 Material: PLA Brand: Prusament…
bed cohesion is key here, especially for the tri-loop mesh
Die Pyramiden lassen sich schnell und mit wenig Materialeinsatz drucken. Sie werden einfach zusammengesteckt und lassen sich bei nicht Gebrauch auch wieder auseinandernehmen um sie platzsparend zu verstauen. Die Pyramiden sind 40mm breit…
Another model on the Fabric theme - this time made of triangles . This is the pattern I like the most so far - you can see triangles, hexagons and even circles in it This Fabric model is very nicely flexible, At this size it can serve as…
Four Triangles Keys 9, 10, 11 and 12mm Hollow triangle Print Settings Printer: FLSUN SR Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: PLA Category: Hand Tools
Just a simple triangle for downloading and modifying.
Triangular Mountain Wall Art – Minimalist Nature Wall Decor Hexagonal Wall Art is avaliable on my profile The design features four triangular panels with mountain and forest landscapes, creating a modern and stylish wall decoration. These…
These shelf brackets mount on the previously existing curtain rod screws in my bedroom. Your screws will need to have a thread diameter of <0.2" and a head diameter of <0.35". There are also holes on the bottom if you want to screw the…
https://youtube.com/shorts/YR8nzGXxVZA?feature=share The Penrose Triangle is a classic example of an impossible object that has captivated people's attention for decades. It was first introduced by Lionel and Roger Penrose, who were…
Triangle hairclip. Printed out of Prusament Galaxy Black PLA. It may be printed using PETG for strength. Happy printing!
The game is designed for at least 2 players (maximum is 4). In this game, the task is to stretch the rubber bands over 4 protrusions (no less, no more). The goal of stretching the rubber bands is to create a triangle between the rubber…
A hypnotic fidget toy as seen on @lucythemaker's tiktok . Concentric triangles that look cool when you move it around your desk For commercial licensing - check out lucythemaker's thangs membership https://thangs.com/designer/lucythemaker…
Lates update 27/07/25 Three air outlets (beta): a central duct has been added to complement the two classic side outlets, providing direct cooling to the nozzle and improved wraparound airflow on the printed part. Designed exclusively for…
Regular triangle rail cross for wooden railway by Ikea, Brio, ... Recommended printer settings: Perimeters: 3 Layer height: 0,2-0,3mm Infill: 10-20%
Decorative Vase, designed to be printed in Vase mode. Like it? This Model is part of a batch of vases I released. Find the other vases here
Orbiter 2.0 is a great extruder and I have been using it on my Voron 0.1. Now V0.2 is out and I made a mod for it. There are many E3D Revo heater core failed, mine included. I keep using the Revo Voron heatsink but replaced the heater…
Stylus that is similar to the one loaded onto the flashforge 5M / AD5M from the factory. Has two spots for magnets. Same magnets that are in the enclosure kit. Printed with default settings, but add brim, and no supports.
Simple stackable painter's pyramids to print without supports. Most other I saw have circular holes on the sides, which are hard to print with no supports. This design has triangular holes for that reason.
Painting stands for spray paint and other messy paint operations.
Since I'm totally into the vase mode, I've designed a few vases in Fusion360 and am excited to share them with you as well. This vase gets more open at the top, is slightly twisted and has a chic triangle pattern. Size: 118mm wide and…
This hexagonal trick box has a hidden latch mechanism. This remix of the original Twist Lock Trick Box (hexagon) uses a triangular base and cap. Just like the original, this can be customized with different topper designs. Any topper…
As much as I like the K2 clip design I am not a fan of the 3 different interfaces. I always use the “standard” one and therefore often had to rotate the clip to clamp in the filament. With the triangle clip design that issue was solved…
I changed my hotends to Phaetus and needed to lock rotation for easy nozzle change. The adapters are confirmed to work with TriangleLab as well. Compatible with both types, ST/HT. Fits between extruder body and hotend and uses the…
This is the first 3D-printed enclsoure featuring a triangular prism-like shape rear support for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It combines a…
This is the upgraded 3D-printed enclsoure featuring a triangular prism-like shape rear support with margin for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It…
All-in-One – Triangle Knob / Star Knob for M6 & M8 bolt or nut. Choose if you want to use an M6 or M8 bolt or nut. It comes with a cover cap if you don't need the through-hole. This knob is super convenient since you don’t need to print…
For a small table with 38mm balls, this design has tight clearances. When racked, there is a total clearance of 2mm (1mm per edge). Fileted (contact) edges to reduce chances of damaging the felt. 2.5mm thick walls. Fits the MK3s bed.…
Thanks for stopping by! This page has two uses: one is for you to access an equilateral triangle SVG for your TinkerCAD profile to create knurling, and the other use is for you to print a quick torture test of a cylinder with knurling…
Triangular Key for electricity cabinet, Material: PETG 0.2 layer height, 15% infill, Brim: Yes, Suport: None
This model is compatible with the lego system.
Leather stamps for pattern
Triangle key for automated gate motor Cylinder diameter 11mm Triangle side 8mm Post-Printing Category: Replacement Parts
It now has 15, 10 and 8 mm edges. Edit (24/07/2023): Added 20, 15 and 10 mm. I used ABS with 5 perimeters and 25% grid infill, feels strong and it didn't fail for now, Edit (10/2/2026): Added a parametric f3d file so anyone can adjust the…
Squares See-Through Bowl - Vertically This 3D printable bowl features a unique geometric pattern of intersecting triangles, creating a mesmerizing see-through effect. When viewed from an angle, the intricate latticework reveals a…
This is a triangular corner clamp utilizing l bolts. The clamp has a slight lip on its outer edge to let it sit on the work material. I made the L bolts out 4-½" x ¼"-20 machine bolts and chased the threads down further with a die. You…
Triangle key for some plastic door - 10mm triangle side, 16mm circle diameter, at least 8mm depth. Remix - I took the top handle off and slaped it on the cylinder with the triangle cut out. Since tinker card does not center a triangle…
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
Unlike a common painting triangle, this design features a ball end to prevent the tip from digging into the plywood. Designed for use with large sheets of softwood. Screw holes are 4mm in diameter Printing with PLA is suggested (3 walls,…
18650 Cell triangle holder for your DIY projects.
This is a tool to correct the angle for a triple monitors setup for sim racing
This is Geometric Triangle with Circles inside. This is wall art.
This is Geometric Triangle Wall Art
A set of polygons/prisms to remix to make beautiful things. Use them to make your own model or decoration. You can find: Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Ennagon and Decagon. Feel free to like, download and follow.…
Easy to print with PETG
Triangle Labs CHC Pro Hotend step file model. Made as I could not find one and needed it to modify mounting parts
This is the third part from my deep dive into tensegrity models. I still have a few more coming. Learned a lot, all in all I've created 5 models. I'll post them all here when I can. I find things like this fascinating. At first glance it…
A simple design inspired by the endless structure of a fractal triangle. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
I design a Electronic Bay Cover with LED Light Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Its a heavy…
Since I needed a liftarm with holes instead of crosses and in regular as well as half thickness, I constructed a 3x5 and 3x5x0.5 liftarm similar to the Lego - parts 99773, 65193, 2905. Print the liftarms in STL orientation with support on…
