1 / 2
Triangle Filament Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple filament clip 1,75 mm with 3 locking points
- Rating
- 4.964 / 5
- Likes
- 130
- Downloads
- 1,004
- Makes
- 38
- Views
- 3,633
- Reviews
- 28
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Triangle Filament Clip
(Based from K2 Clip)
The clip can be left to "float" on your filament spool while printing.
Three identical anchor points to facilitate the installation of the clip.
The solid form is easier to print if you have problems with adhesion.
Files :
Triangle_Clip.stl
Triangle_Clip_Light.stl
Print Settings :
Triangle_Clip.stl
- Layer height: 0.2mm
- Perimeters: 2
- Ironing: on
- Infill: 20%
- Nozzle temperature: as low as possible
Triangle_Clip_Light.stl
- Layer height: 0.2mm
- Perimeters: 3
- Ironing: on
- Infill: 0%
- Nozzle temperature: as low as possible
------
Happy Print to the whole community :)