Counting matching models…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Remixed the original large Pinecil case to be printed in multiple parts/materials. Reason: because it looks good.;) Tolerance between the outer and inner parts is 0.1 so it should fit nice. Glue the inner to the outer parts. Be sure to…
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
Here is a remix of me, since I needed more space for accessories and unfortunately the long soldering tips did not quite fit, so that I also fitted it, I also redesigned the lower compartment.
-Uses six M3x20 screws for the hinges and latch. -Uses two 3mm x 1mm magnets for the small parts storage compartment (optional). Storage for: 1 x Pinecil (TS100/TS101 BETA versions still testing) 7 x Short Tips (6 x Tips for TS100/TS101…
After using the very nice TS100 box from @pjotrstrog I decided to make a few small improvements according to my own needs. The inserts will fit into the original box as I didn't want to reprint the main box. Here are the changes I've…
Saw different versions of the stand and decided to combine a few ideas and create a new version: Reinforced Stability: Thickened the stand's design, ensuring it remains securely in place. Effortless Removal: Added grip makes detaching the…
Print both files from this model, the rest of the files can be used from the original model. If you have any question, feel free to contact me.
Included Testpieces for checking the fit and tolerances.
Case for TS100 Soldering Iron & Additional Tips . Uses 1.75mm filament for hinges, and 4mmx2mm Round Neodymium Magnets Outer Dimensions: 179mm x 38.6mm x 25.8mm Also have a look at my Fume Extractor & TS80 Case UPDATE v27: with better…
I designed this miter bar because the one included with the saw has too much play. The aluminium miter slot is 21mm (when new) but will wear down with use and it will wear more at the front than the back. Instructions: Print the test…
I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.
A soldering iron stand for your PINECIL & TS100/101 “RUGGED CASE” w/ finger groove for easy removal. Needs a 608 bearing, M3 screw, and M3 hex nut like the original. Optional M3 heatset insert option added (5mm OD x 4mm Length).
Iron stand and adaptor clip for TS100 iron and Dewalt Li-Ion batteries. Use 0.5mm copper sheet for the connecting blades, and XT60 connector for connection to TS100 standart XT60 lead. Use the printable jig to solder the connector to the…
The nut from the original post was too big for my saw so I redesigned one based on the dimensions of the miter slot on my saw. After that I decided that the featherboard itself was a bit short so I lenghtened it by 5mm. I also increased…
This is 3D model for TS100 digital mini soldering iron, which can be used to design TS100 accessories (boxes, stands, holders, etc.). Model include Fusion 360 project, as well as STL files for: TS100 body, TS100 tip, TS100 with tip. I…
This is a Gridfinity stand for the TS100 / Pinecil soldering irons. IMPORTANT: This uses the Strong Stand by Termiman . The base uses the Gridfinity Refined design, so you can press fit magnets in to the base, rather than requiring glue.
A shallow tray to store your TS100 soldering iron, up to 5 tips and various accessories below. The iron and tips can easily be removed by pressing down on one side. For Gridfinity by Zack Freedman .
This is a case for TS100 soldering iron. It is made by JamesK1. Link to original .
Custom case for the awesome TS100 soldering iron. Product Links TS100: https://www.banggood.com/MINI-TS100-Digital-OLED-Programmable-Interface-DC-5525-Soldering-Iron-Station-Built-in-STM32-Chip-p-984214.html?p=2@3021069489201207MV Extra…
I had a few issues with the existing version of the stand for @termiman's and @PjotrStrog's soldering iron cases. The stand was a loose fit in the case when stored, causing it to fall out, and it was slightly fiddly to remove. The stand…
A small container for flux paste. Fits in the unused space above the tips for the Top Large insert. Use some glue to secure the box to the insert. Find the case here:…
Updates 11/2025: Added a version for third party tips with 4.0 mm shank size (thin section directly behind the heating element at the front). The original Pine64 short tips come in 3.65 mm shank size, as do many third party options. But…
CNC Kitchen TS100/Pinecil heat insert tip holder bin for gridfinity
You need 1 additional washer with 2mm thickness and 25mm Diameter. Optional, put some weight under the holder, to ensure that it has a good stand.
This is a remix of PjotrStrog's Rugged Multipart Pinecil/TS100/TS80 (V2) case. I've added the Miniware logo cutout to the large size lid for TS100 and TS80 users.
I measured it with my trusty calipers.
Gridfinity TS100 + 3 Tips + Soldering Pump + Solder
This is an all-in-one solution for a TS100 soldering iron for use in the Gridfinity organization system by ZackFreedman This is clearly inspired by both ZackFreedman's Gridfinity Pinecil + TS100 Tips and Tool Holder and pelrun's…
This is my design to hold my TS101 within a Gridfinity of 3 x 2. I added a clip to hold the cable. Maybe someone has a better solution for this? The cable is very flexible and will not last inside. Edit 2023-06-23: added Solid Edge Design…
Ich habe Nutensteine für die Tischkreissäge Bosch GTS10XC gezeichnet und gedruckt. Sie sind für M6 6-Kantschrauben gedacht. Da die linke und die rechte Nut unterschiedlich sind, habe ich natürlich auch entsprechend unterschiedliche…
What we will need: - 6x M3x20 screw - 1x M3x14 screws - 1x M3 hex nut - 1x 608 bearing - All printed files (soldering wire spool; clampers are needed 2 times) - Glue (optional) Assembly Instructions for the TS101 Box - Insert the 608…
This is a drawer insert for the Stealth Press 1S Drawer add-on to accommodate the recommended heatset insert tip for the TS100/TS101 soldering iron. Stealth Press 1S Drawer Add-on TS101 heatset insert tip
18V Makita Battery Adapter: See my design here https://www.printables.com/model/436132/ 18V Bosch Professional Battery Adapter: See my design here https://www.printables.com/model/427974/ 1x Power Switch: Switch size 21 x 15mm Front…
I used the following one, i can't guarantee that all AliExpress versions will fit though. https://www.aliexpress.com/item/1005006503495825.html?spm=a2g0o.order_list.order_list_main.16.13111802lsBWzr This will fit the M2, M3, M4, M5, M6…
Model I designed this case to carry both the Miniware TS100 and its accessories, including the battery. The box is divided into 2 levels, the lower one can accommodate ESD tweezers, a solder holder , the 50cm cable and space for adapters…
This small container integrates screw threads and aligns perfectly with the empty space in the upper lid of the rugged Pinecil/TS100/TS80 case. This was designed to be pressure fit without needing to be secured with glue. I can't attest…
Based on the other holder arms provided by @BaGooN, I created a version to perfectly fit my TS100 soldering iron. This design uses only one screw for retaining the soldering iron, to preserve the ability to press both buttons on the side…
Print in place case to hold the TS101 soldering iron as well as tips and optionally a screw driver. 9 different versions, in 2 configurations have been included. The first configuration can hold 1 to 5 tips as well as soldering iron. The…
Use this top outer shell to label your case for your TS100, TS101, TS80, TS80P, or Pinecil. This is just the outer case. Go to the original model to pickup the inserts and the bottom half of the shell.
Replacement shell for the TS100 if you also want CAD files (F3D and STEP) go HERE The original appearance has been modified to make it more ergonomic for precise and continuous use. The project is based on BogdanTheGeek's drawing.
I printed and used the Double Layer case remix for my soldering iron and have liked it a lot. My biggest problem with it though was that when fully opened the lid did not sit flush on a table like the base does. To resolve this I made the…
I remixed the original design to hold 8 tips in 1 box. If you only want to use 1 of the sides (to hold 4 tips) it will work with the original boxes. Since mjcopper so generously offered his STEP files (thank you!) I will continue and…
A simple XT60 snap-on adapter for Makita batteries, but I only recommend using the ones with the little star marking on them, as these are the only ones with battery protection. I have an Instructable here describing the how-to:…
Another Gridfinity TS100 tray - this one accomodates for the usb-c power cable.
I love this little soldering iron but it doesn't fit the holder i have... so i made one. Designed in onshape in 2 pieces. I used an M8 washer(22mm outer diameter and 8mm inner) as the point of contact which press fits into a clip. The…
This adapter mount is designed for use with the Dremel Workstation 220 and the TS101 soldering iron for applying heat inserts. It fits centrally within the Dremel holder and is secured using a 3/4 inch x 12 revolutions per inch (12rpi)…
About Bosch battery connector or adapter. With this adapter you can use your Bosch professional (blue series) 18V batteries (Typ: GBA18V) to power other devices, e.g. the popular TS-100 soldering iron). Instructions You need to print the…
This is a remix of Robins ts100/ts101-box ( https://www.printables.com/model/1142422-modified-insets-for-ts101-all-in-one-for-brass-ins ). I've adapted the inserts adaptor to fit insert tips from CNCKitchen. I also added a spool which…
Changed the parts around latches to make them easier to reach
This is an adaptor mount to fit a TS100 soldering iron to a Dremel Workstation drill press. This allows the press to be used to melt threaded inserts into a 3D print more precisely. The threaded part of the mount screws directly into the…
You need to print 2 copies of the box and one copy of the pin to hold them together as a hinge. As the pin is waaaay too long to be printed standing up, or it would need supports, I cut it in half, and printed 2 copies of it too, then…
I decided to create a blank insert to store different things in the Rugged Multipart Pinecil/TS100/TS80 Case. I tested it with @aikano9's remix which allows me to have a multipurpose space on a second level.…
I printed the rugged case for my TS100 (https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2) and noticed, that the stand for the soldering iron would not snap securely into the top of the case. Also the…
In case the original stand is too loose for your case you could give a try to this one. It just has a small bulge in the place it connects to the case and that's it.
Here is a case for the new threaded insert tools from CNC Kitchen designed for the TS100 soldering iron. Print with no supports in as much detail as you like. For assembly requires: 8x 4mm x 1.8mm magnets TS100 threaded insert tips can be…
A TS100 soldering station designed to hold the iron, tip cleaner brass wool, and various battery adapters. I started the design for a Makita/Bosch adapter I bought from Amazon, but switched to a 3d printed model. I am including my remix…
I found it to be inconvenient that I had to grab things like Flux and tweezers out of a big box of “mess” whenever I needed them. So I’ve made this TS101 accessories box to keep the commonly used bits and pieces together. Most of the…
I needed a TS101 + CNC Kitchens Threaded Inserts Storage Solution for my existing Gridfinity setup (Ikea Alex) so I designed this quickly in Fusion 360. The Gridfinity bin itself was generated by the Fusion 360 Gridfinity Plugin, the…
a gridfinity magnet base for the pinecil and ts100 soldering iron, has a compartment for brass sponge to replace the giant spring soldering iron holders. designed so the tip does not extend past the back side of the base so it can still…
This model is compound by 3 different pieces, the first one is like a base that can be screwed on dremel workstation, this one accepts 2 attachments at the moment the first one for a ts101 welder and a second one which is kind of a…
This insert takes the original “TS100/Pinecil Top Large” insert and adds storage for all 7 heatset insert bits that come with the AliExpress tip. Also has a bit larger tolerances, which makes it easier to remove the small bits.…
3D Printable case for the CNC Kitchen TS100 / TS101 Heat Set Insert Soldering Iron Tips compatible with, for example, Pinecil or Miniware irons. Fits the Insert Extractor V2 (not the V1). Compatible with: (GLOBAL - shipped from Germany)…
This is a holder for Miniware TS101 soldering iron. It's meant to be a pretty tight fit, that's still easy to use (insert and remove iron). I'm using the provided finger shield, that this socket is made to accomodate, but TS101 or other…
Mit diesem Anschlag könnt ihr wiederholgenau schmale Leisten auf eurer Tischkreissäge sägen. Ausgelegt ist er für eine Bosch GTS10, könnte aber auch auf anderen Tischkreissägen passen. Ich habe den Anschlag mit FreeCAD gezeichnet, die…
This is an adapter to power a device via 24V XT60 and/or USB from a Einhell Power X Change battery. I created it to power my TS100 soldering iron and a fume extractor (aka fan) from the Einhell batteries. Of course you can power any USB…
Remixed from TS100 Soldering Station on Thingiverse by sunbart . A stand for the wonderful TS100 or Pinecil soldering iron, with a place for a copper wire tip cleaner and a spool of solder. This remix does not require the bearings or…
Made the case bigger to include USB-C power adaptor. It can be printed on a Prusa Mini Remix of https://www.printables.com/model/237958-pinecil-ts100-ts101-ts80-ts80p-case-with-options-s
For TS101 3 Tips and M8-M2 Gridfinity Fotprint 2x3 And the Light gridfinity bin as storage
new hinge. → You can now put the case flat on the table. Made a holder. Push down to lock the holder. Bearing : cheap 608zz, 608Rs… remove covers and degrease the bearing to reduce heat transfer .. It you will melt the holder Use filament…
Holder uses 608 bearing, M3 Square Nut and Bolt.
The original model is made by Termiman, later a mamber PjotrStrog created a nicer and reinforced version of this case, but did not upload an insert that holds a 6ml flux syringe. Since I prefer to have my flux in the case instead of the…
The ts100 soldering iron is a great iron but I have always thought that the grip wasn't very good and I was always scared to loose grip and touch the hot tip, so I designed this grip! I designed three attachment systems, choose the one of…
I designed this only for my own needs and working scenario. If the design doesn't fit your taste please be kind with your words. If you like to mod it into what you need, there is a STEP file.
A 3x1 Gridfinity Storage Container for CNC Kitchens TS100 Heatset Insert Tip in the Sizes M2-M8.
Remix of Yuri's TS100 wall mount for SKADIS pegboard. Used the hooks from bjorntm 's Thingiverse design Stanley Wirestripper holder for Skadis . Printed in Overture PETG, PLA may work. Use supports, I found printing on the side is easiest.
EleLab_v2 TS100 soldering station For general information and building instructions about this project please see the Github repo ! Also check out the collection of the whole EleLab system here ! The EleLab system is a low cost, modular…
Securely holding the bearing @@ omgwowbbq
The lid insert has a holder for brass inset adapter ( this one https://de.aliexpress.com/item/1005006503495825.html ) and needs two 6x3 magnets. Step and f3d file included. PART_ files contain the parts only, SLICER_ files include parts…
A TS100/TS101 stand for HSW with additional pockets for the CNC Kitchen heatset insert tool bits. This one should be printed upside down (as oriented in the STL) to allow for the HSW plugs to be properly printed.
Print tip: Put supports under the Honeycomb holder (place marked on the image)
An adaptor based on macsboost's Milwaukee connector, to allow you to use your TS100 soldering iron on an M18 Fuel battery. Print instructions Category: Electronics Summary An adaptor based on macsboost's Milwaukee connector, to allow you…
This is a set of gridfinity based containers/bins which I created to fit a TS101 & TS100 soldering iron and other soldering related tools. There was always something I didn't quite like about existing designs and wanted something custom…
Just slightly modified the remixed source.. added friction clasps and remove the pins on the top lid as I found it causing a fitting problem. FYI. The one I printed has one clasp in the center versus the updated model has 2 clasps. No…
After using a popular TS100 soldering pen holder (ref. mightynozzle , ID 2385609), I found that I didn't need the sponge or the variable angle. Clumsy as I am there were also a couple of accidental burns due to the iron being rather…
Remixed the inserts to use case for TS101. Other parts should be used from the original model. The list of parts: 1. pinecil xl bottom omni.3mf (from original model) 2. Top Logo.3mf (from original model) 3. latch.3mf (from original model)…
A holder for TS100 soldering iron that encompasses the soldering iron tip holders, solder spool holder, and tip cleaner. Source file included so feel free to use it for your remixes :) Category: Tool Holders & Boxes
Organizer with magnetic lid for soldering iron. The beautiful model by vchan3m (https://www.thingiverse.com/thing:2721723) was made for the TS100, so I added a cable compartment for the grounding wire and USB-C cable that came with my…
Special bracket for the pencil soldering iron TS100/101 for the Fully printable Heat Set Insert Press https://www.printables.com/model/868742-fully-printed-heat-set-insert-press
This is a Gridfinity bin to hold the Pinecil, TS100, TS200 heat set insert tip set from CNC Kitchen. The bin itself was created with the GridfinityGenerator plugin for Fusion 360 by Lev Mishin. Printed on Bambu Labs P1S in PLA. 0.2mm…
This is remix of insert for awesome TS100 pinecil case. https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2 This remix has place for 5 ml syringe with flux. Outer diameter of syringe is 13.7 mm, maximum…
A slim case for the TS100 soldering iron without any wiggle room and a friction fitted cap. Protects the iron in my toolbox. Buy the TS100 on Banggood (Affiliate link) Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: No…
Tištěno z PLA+ Mladeč, magnety 10x3mm od Unimagnet.
Soldering pen and brass wool holder. Fits Pinecil, TS100, or similar soldering pens Printed in PLA. Balanced, no weights needed. 3 hour 20 minutes print on an Ender 3 V2. Hardware : 8mm ball bearing(608, 22mm outer diameter) for soldering…
As I couldn't find a model that fit the TS101 (with the appropriate thread feature) to fit it to the Dremel Workstation 220, I had to make my own. The thread allows it to fit into the same connection as various Dremel tools with the EZ…
This is only the bottom part, for the other components and printing instructions please refer to the original model from Stoneheach.
Fully printable travel box for my soldering kit. No additional hardware required. Uses SnapLock latches for locking the box closed. Holds a full assortment of kit: TS100/TS101/Pinecil or compatible soldering iron Power adapter USB power…
You can buy these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize the usage of the light…
Tolerances of your printer will play big role. In worst case remake the inside part of the model with bracket mounts for the pinecil, make it little bit tighter. Spare height for the solder roll is 2cm. Mine is only 16mm high so I have a…
