594 models
Two parts Connected with magnets Magnet size: 5mm diameter, length 8.5mm Printed with auto generated supports…
Print approx. €15.26–€18.65 excl. taxPreliminary estimate for one variant
Simple Hooks for Towel Radiators in your Bathroom. They fit on radiators with 21mm tubes. I added the Fusion360 as it is a nice beginner sketch to learn remixing. PETG is preferred due to better heat stability. It's super easy to print .…
Universal clip that fits around 5 gallon bucket rim. Keeps bucket from sticking together when stacked. For best results use 3 clips evenly spaced around the rim.
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
No supports required for printing. I'm providing three models here (2 just with the same original proportion, and one improve for better details). One includes the complete knot, while the other is a diagonal version that conserves…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
A simple modern cubic towel hook for the kitchen or bathroom. It is attached using a strip of double-sided adhesive tape. Sticks best to smooth surfaces, such as tiles. Ein simpler, moderner, würfelmförmiger Handtuchhaken für das…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
IKEA Handtuchhalter mit 2cm Basis - beim Mutterkonzern nicht mehr lieferbar. Im Silber dem Original sehr ähnlich. IKEA towel rail with 2cm base - no longer available from the parent company. Very similar to the original in silver.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Halten Sie Ordnung und Effizienz aufrecht mit dieser praktischen Papiertuch-Halterung, inklusive integrierter Halterung für Sprühflaschen. Hinweis: Nicht für den Druck auf dem Prusa MK3 geeignet, aufgrund von Höhenbeschränkungen. Stay…
Print approx. €31.49–€38.49 excl. taxPreliminary estimate for PETGSource material: PET
This rigid box is designed to safeguard TUC crackers, whether you're on a journey, carrying it in your bag, or stowing it in your backpack. No more worries about finding out the crackers in crumbs. Keep your TUC crackers intact wherever…
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for one variant
Slicer: PrusaSlicer 2.5 Nozzle: 0,4mm First layer height: 0,2mm Layer height: 0,2mm Spiral vase External perimeters: 0,8mm Alle exakten Slicer Einstellungen sind im .3mf File eingebettet Druckzeit etwa 10 Minuten Der Haken wird auf der…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
I printed this on a Core One in PETG CF with 6 perimeters and 25% gyroid infill. Probably overkill, but I didn't want it to break.
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for PETGSource material: PET
Un objeto muy simple para guardar los útiles de dibujo que utilizan los niños en la escuela
Zum schnellen Trocknen von Handtüchern habe ich diese Halterung zum Einhängen in die Heizung entworfen. Die eingesetzte Gardinenstange hat einen Durchmesser von 12,8 mm und muss fixiert werden. Das kann man mit Kleber machen oder, wie ich…
Print approx. €3.79–€4.63 excl. taxPreliminary estimate for PETGSource material: PET
The Twi'lek Isa Lia'ry These two Wood Carved Plaques were found and acquired from an abandoned communal cloister on the planet of Ryloth The cloister is associated with the first missionaries that settled there after the first wave of…
Print approx. €12.59–€15.39 excl. taxPreliminary estimate for one variant
Addition to Leifheit clothes dryer as in picture - your robotic vacuum cleaner wont stuck anymore
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Schrauben: 3 Stk. SPAX 3x12mm Holzschrauben Bohrschablone zur passgenauen Montage als .pdf im Anhang
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
Passend für ca. 30 x 30mm Vierkant und Ausschnitt für Durchmesser ca 23mm Suitable for approx. 30 x 30mm square and cut-out for diameter approx. 23mm - Besonders zu empfehlen, wegen Stabilität und Temperatur: Filament: PETG Perimeter: 4…
Print approx. €3.30–€4.04 excl. taxPreliminary estimate for PETGSource material: PET
IMPORTANT NOTE: Please only use a flexible filament. I used an 89A Shore Hardness PLA from Ataraxia. If made of ridged PLA, PETG, ABS, etc., and the tuck comes partially out of position and is sticking out, it will will impale you. Trust…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for one variant
I was tired of the towels always being thrown onto the shelf, so I designed a hook on which you can easily hang the towels. The hooks can be attached to the handles very easily and without damaging them. If necessary, these can also be…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Diese Halterung ist für das Spültuch Jemako designt damit dieses nach Gebrauch abtropfen kann und dadurch hygienisch trocknet. Es kann völlig ohne Support gedruckt werden, vorzüglich in PETG This holder is designed for the Jemako…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
Nachdem ich immer wieder davon genervt war das mir dir Spültücher vom Spülmaschinen griff herunter gerutscht sind hab ich mir schnell diesen kleinen Clip für meine Spül- und Handtücher entworfen. Er passt sehr gut auf einen horizontalen…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Por fin mis cajas de herramientas tienen un lugar que no sea el suelo.
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
Object: Three-wheeled scooter Model: Meteor Type: Tucan Part: keyway of steering wheel Description: This is a keyway of steering wheel from three-wheeled scooter which was broken during drive. Part was upgrade from factory design because…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
I needed an easy way to test my support settings when it comes to actually removing the supports from your prints. Especially when they are difficult to remove. This test print is primarily for you to test the different values / results…
Papiertuchhalter für Unterbaumontage Material: PETG Infill: Gyroid 30% Zum einfachen Anziehen der Schrauben verwenden Sie am besten einen Winkelschrauber Vorsatz auf dem Akkuschrauber. Wie zum Bsp. den Wolfcraft #4688000 Wenn dir mein…
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
Ich war auf der Suche nach einem modernen minimalistischem Papiertuch Halter für unsere neue Küche und habe nichts 100% passendes gefunden. Daher habe ich diesen Halter selber designed. Er passt für klassische Zewa Rollen mit einer Länge…
ASSEMBLY MANUAL IS HERE I designed this in a single evening. Do with that information as you will. HTLF is a lane-based filament changer for Klipper designed by ArmoredTurtle. It uses a camshaft to engage the selected lane, effectively…
Für die Werkstatt habe ich einen Küchenrollenhalter kreiiert er wird mit zwei Spax in eine OSB Wand geschraubt. 20230711 “Möbelschrauben” feiner justierbar 20230723 Ikea Skadis hinzu 20230725 auch ohne Wabenmuster 20230729 Verschraubung…
Estuche para guardar tus tarjetas micro SD y que no se te pierdan.
This model is a remix of: https://www.thingiverse.com/thing:5251321 Scale about 1/10. I did following changes: I fixed the model so it's 3D printable Attempted to turn the model into european version: removed trunk lid handle added dual…
scale 1/72 On my cults page you can download planes like this one on a larger scale and detail, they are for sale for 10 euros https://cults3d.com/es/usuarios/ivangonzalezm/creaci%C3%B3n missing rudder parts included excuse me After…
If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store . ____________________________________________________ ***FITS TUCKBOX (Walmart)…
Since the clip that comes with Rituals Car perfume is too narrow/small to use on the Hyundai Tucson vent wing, I designed this for the same and it fits pretty well.
Print in place Needs Supports
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
The Embraer EMB 314 (A-29) Super Tucano, Brazil's answer to a light attack CAS aircraft. It is a highly versatile and low-cost turbo-prop powered craft, can be fitted with a vast array of munitions, and is operated by nations worldwide.…
Prusa'nın Shelf Phone Stand modelini ve auroratechchannel'ın Tripod Phone mount modellerini bir araya getirerek, daha dayanıklı bir telefon tutucu elde ettik. Prusa'nın orjinal modeli şahane olsa da, ince parçalar çok olduğu için 3 kez…
I recommend printing my improved version: https://www.printables.com/cs/model/654548-improved-seat-tracks-cover-for-hyundai-tucson-nx4- Layer height: 0,15 mm or lower Supports: yes, organic supports works great You'll need to print two…
Ein Haken zum einklicken in einen Handtuch-Trockner-Heizkörper Original.stl: 25.11.2020 Durchmesser der Rohre: 23 mm, Abstand der Rohre 22 mm Damit fällt das gefuzzle beim einfädeln der Handtücher weg. Einfach an den Haken hängen und es…
A very simple and minimalist holder for your guest towels in the bathroom. The design can be printed on any printer without any problems, even on mini printers with a very small installation space. The holder consists of several parts…
Print Orientation: Recommended to print on its back where the most surface area is in contact with the build plate.
18.05.2025: OBSOLETE! Successor model IAF Idler (Install and Forget) can be found here: https://www.printables.com/model/1269218-nextruder-mmu-multi-material-gamechanger-iaf-idler After many failed prints in which the extruder stops…
Shower Towel Hook Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Available for 6, 8 and 10mm thick glass walls and doors. Have fun! Duschwand Handtuch Hacken…
Less noticeable than an over the belt clip. Better support than a J-clip. Three lengths included. I like the shorter ones for subcompacts. Fits 1.5 inch belt. And after a few iterations and several months testing we have – Version 2! V2…
The source marked this model as adult content.
These pads lift the chair by 8mm- enough, so that the Vacuum Robot is not getting stucked.
Taschentuch Box Hülle, tissue box cover Kann schnell und einfach im Vasenmodus gedruckt werden (Bilder im Anhang: Modell wurde im Vasenmodus erstellt). Gedruckt in PLA und Vasenmodus für Boxen mit folgenden Standardmaßen (grobe Werte): L…
Simple box for keeping handkerchiefs at hand (about 2 full packages).
Towel Holder for the kitchen. It fits one towel. - Handtuchhalter für die Küche. Passend für ein Handtuch.
Schlüsselbrett Handtuchhalter Haken
Das Original ist von Roland, ein schlichtes, jedoch wie ich finde tolles Design, einfach zu drucken.
dust cap for the headlight of a Hyundai Tucson. I lost one of the dust caps while replacing a headlight so i made this design to replace it. Print instructions There are 2 printable parts, 1 dust cap and 1 seal ring. I recommend to print…
This hanger will clamp to the heater and stick. Use the f3d file to adjust all parameter according to your needs. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: Doesn't Matter Supports: No Resolution: 0,02 Infill: 10%…
Ring to put around a lettuce plant to protect it against snails. Also the lettuce seems to grow faster when the ring is around it (Only tested on 2 plants, so can be coincidence). I designed it to the size of a average plant I had, but…
Kentucky, USA (KY) Topographic Relief Map with Rivers and Coastal Waters Kentucky, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Inspired by this print https://www.thingiverse.com/thing:2241922 I decided to look for my favorite plane, the T-27. Found the CAD, I believe from GrabCAD and worked on it for a while and never had a chance to finish... well, now I have…
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
5 perimeters, 6 top, 6 bottom layers, 30 % gyroind infill. No supports. To be pressfitted/hooked in the slit under the rear seats release lever. Use thin (0.8 to 1 mm) doublesided tape to secure hook in the place. See image bellow where…
My best friend's son was recently accepted into the University of Kentucky and my son and I made him this to put on his desk. Printed using eSun PLA Pro (Blue and White) with 0.2mm layers. Manual filament swap at 25.2mm or layer 126 (if…
I took MKV's armrest storage box for 2022 hyundai tucson and removed dividers in the tray, added a pick up hole and rounded the edges. Thats all.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Badezimmer Handtuchhaken. Für Rohrdurchmesser 22,5 mm.
Haken für Handtuch oder Badetuch
The Bill I present you with The Bill, The Hydroponic plant supporter. I made this for my wife's Gardyn Hydroponic Garden, it will also work in other brands too. Some of the smaller leggy plants needed extra support at the base. The Bill…
Der Haken ist für Küchenfronten bis 16,5mm stärke. Zum oberen Schrank/Schublade müssen mindestens 3,5mm Platz zwischen den Fronten sein. The thickness of your kitchen front has to be max. 16,5mm or aprox 0,65 inches and need a clearence…
Vytisknul jsem několik modelů než jsem trefil správné rozměry výřezů a hran na kterých kastlík drží pod opěrkou. Sedí skvěle.
Wandhalterung für Taschentücherboxen Wall mount for tissue boxes
A set of inserts that can drop into the included tuck boxes, which will also function as holders for the resources etc. The main aim was retaining the original tuck boxes while at the same time increasing their strength, and making them…
What has been improved matches the look of the original cover much more sturdy better and more secure fit doesn't prevent the seat to be moved all the way to the front Print settings matte black PETG Layer height: 0,2 mm or lower 2 walls…
Tray for the drawer of the Hyundai Tucson NX4 FL (2025), designed for the Hybrid version with a steering wheel-mounted automatic shifter. I'm not sure if the drawer is the same for other versions. It fits perfectly, closes securely, and…
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
Für Heizkörpermodelle mit runden Stäben und Stabdurchmesser 22mm und Stababstand (Mitte-Mitte) 42mm
For this model use the following parameters. Print Settings: Layer Height: 0.16mm (Or lower) Infill: 10% Infill Type: Grid - Gyroid Filament: PLA Supports: No Brim: No
Sometimes toolhead cables (extruder, filament sensor, hotend etc) can get caught, damaged or pulled out at the rear or right side of the printer during large prints, nozzle wiping and homing. This can also offset the homing. This is more…
My wife wanted a box for hankies. A simple box was too easy, so i decided to create a dispenser. Round 40 hankies fit in the dispenser. Connect the lid and the box with some filament. As shown in the slicer picture some supports are…
KFC / Kentucky Fried Chicken logo in 3D. 5mm high.
Cartucho basado en la portada del pokemon verde
Printer: Ender 5 plus Rafts: No Supports: No Resolution: 1 Infill: 15% Filament brand: Creality Filament color: Weiss Filament material: Pla
Print the two parts (rosette and shell) separately, and glue them together. Put two screws in the ceiling and mount the shell by twisting it in place. I printed mine in white PLA, with 0.20mm layer height for the rosette and 0.28mm for…
Kleider / Jackenhaken 4-Fach für die Tür Auch Gut geeignet als Handtuchhalter fürs Badezimmer Druckeinstellung: Schichthöhe: 0,2mm Düse: 0,4mm Füllung: 20% Stützen: Ja (Cura Tree) Kunststoff: PLA+
Love my Voxelab Aquila printer but I dont like how the screen hangs off to the right! So, I designed a Screen Tuck Mod to get the display closer to the printer. Much better! If you like what I do, buy me a coffee from the link below. :)…
The enhanced wing features a taller belt height and taller claw grip to really push the pistol grip into, or around, or waist. The design prints in two parts (wing and locking peg) so the wing itself can print flat. The locking peg is…
Este remix agregó el logotipo de la marca Parkside y fue diseñado para ajustarse perfectamente al nivel láser, dejando también espacio en la parte superior e inferior para colocar espuma para que la herramienta no se dañe. filamento usado…
This is a minimal filament clip that employs friction to hold down the loose filament end. Tuck the loose filament end into the angled hole then hook the clip to any strand on the spool. The angled hole should improve the friction to hold…
Title: The Adventures of Robin Hood and Friar Tuck in Danger Expansion Publisher: KOSMOS Designer: Michael Menzel Organizer/box insert for The Adventures of Robin Hood and the Friar Tuck in Danger expansion. This will allow for both to…
Automatic fish feeder for your aquarium. Stuck-free mechanism - a spring-loaded blade decreases the load when a pellet is on the edge Self-cleaning structure - debris will drop into the aquarium Easy to make - only 3 parts Note: It…
Vor Jahren habe ich dieses Design entworfen, weil meine Schwiegermutter einen neuen Papiertuchhalter brauchte. Sie wollte etwas einfaches für die Montage unter einem Küchenschrank. Dies war die einfachste Variante, mit der ich aufwarten…
This is a five (5) blade propeller spinner designed for the Planeprint Super Tucano ( Super Tucano | Planeprint – very light 3d printable rc planes ) and the FMS 5 blade propeller that comes with the FMS PC-21 Pilatus (FMSPROP015). The…
Haken für Handtücher oder Kleidung Passend für Heizkörper mit Rohrdurchmesser 23,5mm
The local kindergarden approached me and asked for a redesign. They lose those keys all the time. So I made a quick design and printed plenty of them for them. Feel free to support your local business and design small helpers.
Este modelo esta compuesto por dos archivos, la pieza del “fulminante” y la baina. Los cuales se unen mediante una rosca a Izquierda. Ideal para guardar pequeñas cosas y objetos, para los amantes de la caza y o las armas. Tamaño 1:1…
A (3-)hook for the towel radiator for towels or other clothes. Can be optionally extended with an attachable extension to have more hooks. You need a minimum of support. Step file is also provided. 16.01.2024: Added a version with 2…
A stylized low poly 3D model of lettuce, featuring layered faceted leaves and smooth polygonal curves. The design captures the vegetable’s natural, leafy texture in a clean minimalist geometric style.
Clip-In-Handtuchhaken für Badregalfach - VW Grand California Designmerkmale: Passgenaue Clip-Geometrie: Die Halterung ist speziell auf den Durchmesser und Abstand der originalen Regalstangen im Badbereich des Grand California abgestimmt.…
Update 2024-08-19: I completely redesigned the clip to be more compact and robust. See at: https://www.printables.com/de/model/967057-the-ultimate-compact-beach-towel-clip I've made some modifications to the highly-regarded model: I…
I'm still new to 3d printing, but I used an image converter to make a 3d model of the older UK wildcats logo and color it in bambu studio. Turned out great for me with this standard 0.4 nozzle print profile. I used 15% infill, but change…
The original Cube design is from south2012 from Thingiverse. I redesigned it and it can fit a coin inside it. A fun thing to show your friends. They will wonder how the coin got inside there.
