Counting matching models…
Shorter LCD supports designed so that the MK3/S can fit inside an Ikea Stuva enclosure with a hole for the bed cables. There is one hole for each side, slightly smaller than the bolt. Use a m3x10 bolt to thread directly into the plastic.…
hier nun die neuste Version der Box V2.0 gedruckt mit PETG.
Protective case for Bosch Intuvia e-Bike display. When the diplay is removed form the bike, a cover can be used to protect the electrical connections: https://www.printables.com/model/421871-bosch-intuvia-electrical-connection-cover The…
A wall mount for a Bosch Intuvia display (I think other Bosch displays would fit as well) including a hook for a key. The display doesn’t snap in, so it can be easily removed. i used double sided tape to place it on the inside of a door.…
Protective cover for Bosch Intuvia e-Bike electrical connections on the bike when removing the display. When the cover is not in use it can can be stored in https://www.printables.com/model/140906-protective-case-for-bosch-intuvia-display…
Jumping on my e-bike one day I noticed that the computer, required to control the electronics, was dangling on the handlebar. One of the clamps was missing, probably just fell off. So I took the remaining clamp and modeled a replacement…
After my child did a pull-up, the clothes rail bracket broke. Unfortunately, this is no longer available at Ikea and so I designed it quickly. How I did it with a cell phone, Inkscape and Tinkercad, you can see in the video. Mehr…
Pinza para coger tubos de ensayo de 10 a 20 mm, sin problema, muy fácil de imprimir y barato, yo lo he impreso en pla y petg , y sin ningún problema de los dos materiales Altura de capa 0.25 relleno de 20% sin soportes
Caliper holder for Stuva
This small container made for my Bosch Intuvia pedelec display is based on Parametrizable Rugged Box by TheSameNameTwice I changed dimensions and added an inlay for the Bosch Intuvia. The white box shown by the picture has been made of…
Türgriff / Griffeinsatz für die älteren IKEA Stuva/Platsa Schränke. ============ Door Handle / Handle Insert for the older IKEA Stuva / Platsa cabinets.
This is a handle for the IKEA STUVA MALAD drawers. Originally, they are just a hole, but I didn't like that so I made this. I decided to print them black to make some contrast, although probably most people would want to print them white.…
I wanted to print a raincap for the Bosch intuvia without any logo. I already printed the fantastic Raincap with Logo from here: https://www.thingiverse.com/thing:3803732 and then removed the logo with sketchup. Nothing special here. If…
A small wallmout for the Bosch “intuvia 100” ebike-display with a hook to hang a keyring. I hope you can use this design and would be very thankfull if you give me a like, a comment or even better post a make of your built. Stay curious…
Höhenverstellbare Füße für IKEA Stuva/Platsa Schränke. Das Druckteil selbst ist 7cm hoch und es wird eine M8 Schraube sowie eine M8 Sechskantmutter benötigt! Je nach Länge der Schraube ergibt sich dann der Weg der Höhenverstellbarkeit! In…
I wanted a mount that would hold my C270 camera securely but not get in the way. Designed to fasten to the pre existing holes in the Stuva Cabinet this mount means you won't damage the cabinet. You could also use this mount with any…
This is a spare IKEA 108903 - STUVA NORDEN HEMNES - Quermutter - Barrel Nut for an Hemnes bed. We lost one. So I designed, printed and used it succesfully. Just cut or press the M6 thread into it. Use the original bolt for pressing or an…
Atuvos holder for e-bike FLYER GOTOUR 5 to mound underneath the frame.
This is a mount for the Raspberry Pi Camera to fit with a nice IKEA Stuva mount I found on thingiverse. Please note that only the part that holds the Pi camera is included. Donload the additional parts from the original creator on…
Hey there, this is my strong design for a Wall Mount on top of the printer, using the IKEA Stuva Pole 17225 which is clipped into the wall mounts. Just print as much as you need and use the Stuva pole. UPDATE 13. Sep 2023 I added two…
This is a wall mount for the Bosch Intuvia ebike computer.
The provided 3mf contains only the right side of the mount. For print the left one you need to mirror the right one.
Eine Wandhalterung für den Intuvia Fahrradomputer von Bosch. Dieser wird von oben aufgeschoben. Daran kann man dann gleich auch noch die Schlüssel hängen, damit man gleich alles beisammen hat. Gedruckt habe ich das in PLA+. Aber das Teil…
Added hole with thread, to use the original support that comes with the printer. I needed a support to put specific rolls or small samples and not have to hold them. And what better than to take advantage of the original support part.
Español Percha para cama ikea stuva English Hanger for ikea stuva bed
The Stuva cabinet from IKEA is the ideal starting point for building an enclosure for your 3D printer. With most printers space is limited inside the enclosure so I designed and printed this mount to use the Ender 3's original spool…
This is two tool holders for the IKEA Stuva cabinet. The magnets is 12mm in diameter.
This is a collection of parts I designed myself or found on Prusaprinters or Thingiverse that is used to place my Mk3s with MMU2 inside an Ikea Stuva with Sindvik doors. The filaments are placed on top of the Stuva. The following parts…
Safety First. Prevents the baby from reaching into the funny designed STUVA cabinet. Should fit perfect. In case it doesn't: Apply glue. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Resolution: 200…
a very simple puzzle with letters in the middle of the print changing the color of the plastic
Choose a printing setting that you prefer and print. Print instructions Category: Household Summary Choose a printing setting that you prefer and print. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
ceci est une alternative au support d'origine fournit avec l'écran. dans mon cas, mon genou tapais dans l'écran donc je l'ai déplacer au centre de mon guidon ne pas imprimer en PLA, vu que l'on doit serrer la visse de direction ^_^
I wanted a mount for the filament reel that went inside the nice new Ikea Stuva Cabinet but I also wanted it to leave the cabinet as undamaged as possible, so decided to use the pre-existing shelf mount holes. The mount fastens on with 4…
A remix of Tronnic's sheet holder to hold 6 sheets, allow for thicker sheets ( I have a garolite build plate that is a bit over 3mm thick), and to fit the shelf hols in the IKEA Stuva Cabinet. Category: 3D Printer Accessories
Thermometer Stuva Ikea / Soporte termómetro Stuva Ikea
Holder to mount Ikea Räcka as a cloth rod in e.g. the Stuva cabinets. For more strength print on the side with support. If you don't need that much strength printing flat without support is good enough. I printed this in PLA. Top Layers:…
Backstory: I needed a mount for the display of a Bosch e-bike. I used Makkinga's model for a wall mount that I found on Cults3D and crudely modified it in Tinkercad (cause I find that the easiest way to work with other ppl's stl files).…
The Stuva cabinet from IKEA is the ideal starting point for building an enclosure for your 3D printer. This mount allows you to attach your PiCam to the inside of your enclosure. Its designed to use two of the factory pre-drilled holes in…
wall mounted Brush holder
our daughter got a new bed from the Ikea stuva line. At some point she was annoyed to get out of bed at night for a drink. "Dad, can't you print me something?" "SURE!" and then it goes on Print Settings Printer Brand: Creality Printer:…
I have build an enclosure for my Creality Ender 3 Pro inside a IKEA Stuva cupboard. Unfortunately the Stuva line is a little to small to comfortably fit the heat bed cable together with a cable chain so I made a hole in the back of the…
Modified maciejb´s Raspberry Pi case ( https://www.thingiverse.com/thing:685074 ). I added the ability to mount it in the standard holes of the Ikea stuva cabinet (where you mount the shelves). Print Settings Printer Brand: Prusa Printer:…
Hook for Ikea stuva bed with 3 optional decorations to clip inside (girl underwear, short and t-shirt). Design of the decorations from Flaticon: T-shirt icônes créées par Good Ware - Flaticon Un pantalon icônes créées par Good Ware -…
Original Prusa i3 MK3 ENCLOSURE - made from stuva parts Ikea work in progress... from IKEA part list norwegian numbers 1 x STUVA frame Artikkelnummer: 301.573.77 2 x STUVA GRUNDLIG Shelf Artikkelnummer: 001.286.97 2 x SINDVIK Vitrinedør…
Here is my spool holder system for a IKEA STUVA & BESTÅ Combo. First of all, Please note that these are primarly adapted for a BESTÅ cabinet with a replaced backplate. The original ikea one is very thin and flimsy. But I have also…
Google Colab : https://colab.research.google.com/github/thisiscam/tuvvg/blob/main/tuvvg.ipynb Github : https://github.com/thisiscam/tuvvg/tree/main
Without these, the Stuva backwall will vibrate and create noise when the printer moves quickly. Just print the side pieces 2-4x and the top/bottom pieces 4-6x, then just stick them in the gap between the backwall and the nut the wall sits…
Magnethalter für Bosch Intuvia Display. Die verwendeten Magnete haben die Maße 15x5mm können jedoch kleiner sein oder die Löcher für die Magnete können angepasst werden. Der halter kann individuell mit dem eigenen Namen versehen werden.…
On photo, it is printed with fuzzy skin: Fuzzy skin: Outside walls Fuzzy skin thickness: 0.15 Fuzzy skin point distance: 0.4
It is a simple holder for a flower pot. The opening of the holder has an inner diameter of 130mm. This means that a conically shaped pot can be held perfectly and also easily changed. Great for climbing plants.
Bumpers and a gasket for the Vtuvia SN-100. The bumpers are made to stop the controller from rattling inside the seating tube. Slide the "middle" bumper on first and slide it towards the cables. Then slide on the "top" bumper on. The…
BC Lietuvos rytas - basketball badge Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 200 Infill: 20 **Filament:** any PLA White Category: Signs & Logos
Print with supports. Use a support blocker for the upper section to save filament. I love the STUVA design but the new wall anchors are UGLY. So I made this to cover them up. Category: Household
Ikea Stuva hook with many variations of thickness. 10, 20, 30, 40mm You can use for the Stuva changing table, for the bed or any other application. There is also the step file in case changes are needed.
Remixed tacotime666's stuva plug since mine didn't quite fit the printing cabinet. This remixed version fits, I just needed to round the corners a little and make the inside diameter slightly smaller. Category: 3D Printing
We couldn't fix the heating lamp for our baby on the wall so I designed a system to hold the lamp above the changing table. I used 40mm wood rods as base. The System is fully movable in all direction and is fixed on the STUVA changing…
Modified waldamore`s LCD mount ( https://www.thingiverse.com/thing:2029649 ), so that it attaches to the screen with M3 screws and nuts. Also made a "wall mount" which fits in the standard holes of the Ikea stuva cabinet (where you mount…
Ikea Stuva - Gancio Borsa per Appendi Abiti
Aprintinplacelaptopstandinamedtuva. Recomend some suports under the midle of the long horisontal bar. PETG is recomended over PLA due to the printinplace hinges being a litle to britle in PLA.
This is a remix of ArcanePath tool holders. I have mixed them together and made it fit Ikea Stuva frame (holes are spaced 19.3cm apart). I have moved spanner holder and centered it between pliers and wrench. Print Settings Printer: Anet…
Aprintinplacelaptopstandinamedtuva. Recomend some suports under the midle of the long horisontal bar. PETG is recomended over PLA due to the printinplace hinges being a litle to britle in PLA.
Ikea Stuva hook with many variations of thickness. 10, 20, 30, 40mm You can use for the Stuva changing table, for the bed or any other application. There is also the step file in case changes are needed.
a very simple puzzle with letters in the middle of the print changing the color of the plastic
This is an accessory for this mount available from Amazon.de https://www.amazon.de/dp/B06XT4QRJS/ref=cm\_sw\_em\_r\_mt\_dp\_U\_aqBnBb9AAN50R I did not like the bar that come with the mount. I wanted a more custom look and larger diameter.…
A slightly shorter version of https://www.thingiverse.com/thing:2811985 . Edit 21.09.2018: Complete rework with chamfer on the cap. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.3 Infill:…
Da ich mein Bosch Intuvia an einem Skadis anhängen wollte habe ich an die bereits erstellte Datei von @MichaelH erweitert. As I wanted to connect my Bosch Intuvia to a Skadis, I have added to the file already created by @MichaelH.
Simple mount for Atuvos tags. Tags fit in snug and the 4 holes allow you to secure it onto something. One rounded, one squared off, and a cap you can glue on. Check out my other models for more organization and storage!
Yet another Ikea Stuva filament guide ! This one is made with OpenSCAD and fully customizable ! Not really a remix, but designed from https://www.thingiverse.com/thing:1895060 Print Settings Printer: Anet A8 Rafts: No Supports: No…
This is a wall mounted holder for the original charger for a Vtuvia SN-100 charger. Might fit other chargers Category: Tools
As a bar I have used the "Stuva Grundlig" from Ikea. But you can also use another tube or rod with a diameter of 1.5cm. Should you also want to use it in Stuva cabinet I recommend a length of 55cm. you can also use the bracket for other…
15% infill. Petg or PLA Apply anti-squeak tape to the lower bracket for a more comfortable user experience.
The Stuva cabinet from IKEA is the ideal starting point for building an enclosure for your 3D printer. With this part I help the filament flow from my spool to the extruder on the side of my printer. This is part of my project to build an…
The Stuva cabinet from IKEA is the ideal starting point for building an enclosure for your 3D printer. Unfortunately the box is too small to fit most common printers (I have an Ender 3 Pro). To mitigate some of the space issues I designed…
Raincap for Bosch Intuvia with Fuji Logo on it. If you want, you can print it in 2 colors, the Mountain-Logo has 2 Heights. There's also a version available without any logo ( https://www.printables.com/model/370830 ) and one with a Logo…
Raincap for Bosch Intuvia with CUBE Logo on it. There's also a version available without any logo ( https://www.printables.com/model/370830 ) and one with a Logo for Fuji Bikes ( https://www.printables.com/model/370826 ) Print Settings…
Now the mount has a loose fit which is suitable IMHO when you attach the mount to a static object like a wall in your house or garage.
This is a TPU insert for your Bosch Kiox computer to put in the Intuvia box.
The Atuvos tag compatible with Apples FindMy network doesn't fit inside the front carrier block of the Brompton - so I needed to find a different solution to mount it without being easily removable. Print it out, add the tag and mount it…
Door lock for IKEA Stuva box & Sindvik door. It's for the enclosure for my Prusa i3 MK2. Should print easily with no supports. You need 1-2 screws. [Update] Added another version where you can more easily control and adjust the lock…
