Counting matching models…
I needed an accurate (tighter tolerance) cleat for the bottom of the Milwaukee Packout so I started from scratch and modeled my own.
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
I had trouble finding one of these files that would fit so i made this one on fusion. 2 regular wood screws to attach to plywood or a cabinet. Its not too tight so easy to get the battery in and out. Its meant to be used on a flat…
Print approx. €8.82–€10.78 excl. taxPreliminary estimate for one variant
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
Diebstahlschutz und Wandhalterung für das Nuki Keypad 2.0 Zusätzlich benötigt: 2x M5x16 2x Dübel und Senkkopfschrauben Anti-theft protection and wall mount for the Nuki Keypad 2.0 Additionally needed: 2x M5x16 2x dowels and countersunk…
Print approx. €4.78–€5.84 excl. taxPreliminary estimate for one variant
I remixed the power outlet dust cover by grumbel , because I want to swap it more often in and out. I use it in the kitchen near the hot plate, where tomato sauce may be splashed or likewise. :) Therefore the cover is a little bit thicker…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
55mm x 40mm or 2.1in x 1.5in (6mm keyhole)
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €7.72–€9.43 excl. taxPreliminary estimate for one variant
A replacement clip for the Ford Puma parcel shelf in the UK
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
A simple cover to protect the new, red Milwaukee guide rail. This is simply pushed onto the rail on the right and left and clamps by itself. It reliably prevents damage to the ends. Best printed with TPU, ASA or PETG. No supports…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Nose section reinforcement (optional) For engines with high power / high torque, I designed a reinforcement for the nose area. It is glued in with epoxy resin. It is primarily intended for LW-PLA fuselages. Print this in PETG. Verstärkung…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
This is a adapter nozzle for the Milwaukee M18 FUEL Blower (3017-20) that allows you to attach the Sealegend Gutter Cleaning Attachment Kit Compatible with EGO leaf blowers https://www.amazon.com/gp/product/B0CWRKSYLP/. That kit is…
Print approx. €9.20–€11.25 excl. taxPreliminary estimate for PETGSource material: PET
Replacement badge for Suzuki
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Able to be printed with colour change at 3mm height or 3 separate files for easier mmu colouring. I will allow prints to be sold if profits are donated to help Ukraine.
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
MultiColor Ukraine Plaque Dont need multicolor printhead... just use change at z height.. Gcode is for COre One.
Print approx. €7.15–€8.73 excl. taxPreliminary estimate for one variant
Studenti navrhnou hrací kostku pro výuku německého jazyka (a dalších jazyků) s vyměnitelnými panely, kterou pak používají jako aktivizační pomůcku pro opakování na začátku hodiny.
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
If you are like me, I worry about carrying fully charged lithium ion tool batteries in tool bags. While the battery connectors are recessed to prevent accidental shorts, I tend to be a bit paranoid with all of the things that…
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
Milwaukee M18 Battery Holder With Lock. So yit can be used inside van etc... Easy to print. Also I have created "short" version of this without lock to use inside workshop. https://www.prusaprinters.org/prints/53685 Print instructions…
🇬🇧 Welcome to London! This model was created by Dany Sánchez . The most famous landmark of London and the United Kingdom: the Big Ben . The tower is officially known as Elizabeth Tower, although the nickname Big Ben, which is the main…
its just a rough approximation of the inside of the Milwaukee Packout compact organiser case for you guys to edit for specific things you wish to put in it. I think i have seen something online but this is modeled by me and is far from…
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
There are a couple of ring size sets; the advantages of this one: size and shape of typical rings, rounded inside no tabs etc, so you can wear a ring for hours to check if it feels comfortable each ring has it's ring size imprinted in 4…
This is a modified version of packout hangers from blahblahblahresearch. I wanted these to have the recess for the charger's base feet to be 90 degrees from the original design and far less tall so that the charger is more stable in the…
nozzle for the Milwaukee 2724-20 M18 FUEL Blower there's one thicker one and one thinner one
Magnetic Bit holders for the trays that come with the Milwaukee slim low profile packout compact organizers. Uses 6x2mm magnets https://www.amazon.com/dp/B07KJ9H31P?psc=1&ref=ppx_yo2ov_dt_b_product_details Super glue the magnets on the…
EDIT: I designed the regular height organizer square bin as well. EDIT2: And the regular height rectangular bin. EDIT3: And I designed a divided regular height rectangular bin with removable dividers as well. EDIT4: Added center bins that…
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
UPDATES : 25/11/2024 : ISO-NORDIC Keycaps added 03/09/2024 : Creating a folder to group Multiplates_files (mostly for Bambu user) Adding 3MF files of all parts to fit in one plates Adding a video to show how to setup keycaps colors on…
A 3-position, ¼″ hex bit holder for Milwaukee's M12 Fuel line of tools. Mounts using the stock clip mount--either in place of, or on the other side of, the stock clip. A right and left STL is provided to fit either side or the orientation…
Overview These label strips provide a place to attach a standard 12mm label (e.g. Brother label maker) to take your Packout organization game to the next level. Features Readable when the lid is open or closed Don't get in the road -…
Loved the original pool noodle handle by Cosmeeto but wanted to add some variety to it for my kiddos and their friends. May the force be with you. See the Sith Model Here
Remix of https://www.thingiverse.com/thing:4618679 Added 4 small bars for a slightly tighter yet variable fit. GIF shows method of removal. Also added a version that shuts the outlet entirely as a dust cap.
Introducing the Milwaukee Leaf Blower Gutter Cleaning Attachment, your ultimate solution for maintaining clean gutters without the need to climb onto your roof. This innovative printable file is designed to make gutter maintenance easier…
Welcome to Stonehenge! This model was created by Artemio García , available also in MMU version. Stonehenge is a prehistoric monument in Wiltshire, England . It consists of a ring of standing stones, with each standing stone around 13…
This deep bin has the top edge on one side cut so it can be placed in the middle section of the packout cases. The big middle bin can now be replaced with two of these. Or use three small bins on one side, and a large open half - like the…
🌅🌅 May the 4th be with you! At MiniWorld3D we celebrate Star Wars Day of May 4th with a model inspired by Luke's iconic home at the Lars moisture farm in Tatooine. To be hidden from the Emperor and Darth Vader, Obi-Wan Kenobi took baby…
Body length is 240mm, so make sure your print area is large enough. The instrument is assembled from several printed parts that are glued together: body, back lid, neck, headstock, fretboard and bridge. Saddle simply slots into the…
Dice Tower Mini Nuke from the game Fallout. Removing the lid reveals the dice channel. Drop the dice down, and they will be dispersed by the cone at the bottom, sending them in any, or all four directions. Sort of chaotic, (just like a…
Printed in PLA with 20% infill and 3 walls.
Star Wars: The Rise of Skywalker Custom lithophane stand included. Software used: Machine Learning (various GitHub based systems/scripts), Photoshop, Blender, Meshmixer and S3D. Dimensions: 172mm x 142mm x 6mm. Print settings and…
Deck box with bonus storage compartment modeled after a Mini Nuke from Fallout! I wanted a thematic deck box for the fallout MTG deck I just bought and thought it would be fun to make my own. I modeled this myself based on images so the…
2020 Aluextrusion Webcam Mount for AUKEY 1080p Webcam Since the Waveshare OV5648 are difficult or expensive to get, I drew a housing for a cheaper variant of a webcam. The AUKEY PC-LM1E 1080p Webcam is a cheap webcam that uses a…
Drawstring beads with the Akatsuki symbol. 3 hole sizes - 4mm, 5mm, 6mm. If you need other sizes, drop a comment and
Milwaukee M12 Subcompact Organizer Insert to be used for Drill/Driver ( 3401-20 ) and Impact Driver ( 3450-20 ), and insert in organizer for packout compact organizer (48-22-8435) Insert to snuggly hold tools, along with an optional…
2024-FEB-7: Lost track of my files a bit, but uploaded several I had in the mix over the last week… the V2 design is stronger and does not have the flanges on each end. *** Iterated a bunch to get a minimal design that is still strong…
Here's Luke Skywalker's lightsaber from Return of the Jedi! Be sure to print two of the triangular indicator pieces, those are very small prints, I would suggest printing them at the same time as some of the larger pieces to let them cool…
With Prusa's new rewards system, if you like this model, PLEASE click the like button Print with supports, should only need them between the body inner and the overhang rail. Pin inserts have been salvaged from a defective cordless drill…
Single (left or right) and double mounts for Milwaukee M12 tools. Mount is angled out from the wall by 10° to clear tool body for most drill/driver style tools. Double holder is angled away from the center by 10° to allow 2 driver type…
This is a remix of khattoum's great Fatman nuke model with a magnetic nose. I also sized each part of his model to 80%. You will need 8 neodymium magnets measuring .25" in diameter and .06" thick. I used these ones;…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/
Looking for a way to store your M12 compatible tools on your honeycomb storage wall? Look no further, as this is a strong solution. While only one connector would fit on the back plate, there are two pass-through holes available to secure…
Bin inserts for Milwaukee Packout system I designed these bin inserts to make better use of the Milwaukee Packout system. Each insert fits snugly into the bins but still leaves just enough clearance for smooth, one-handed use—super handy…
Hex bit holder/tray for the Milwaukee 48-32-9931 Customizable Medium Compact Case (This is a relatively new Milwaukee case - it is not the same as the Shockwave cases). Snaps in place and holds 152 1" hex bits. Holes are sized for…
A new 3D figurine generated by AI, a Chibi Ryuk (Death Note). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
All credit owed to CuriousTech for this incredibly designed M12 battery. CuriousTech also designed the Filler part. These pieces have been modified to have a screw through the middle and thus creating a secure tool wall mount. here are…
Hallo, ich habe mich von anderen Halterungen inspirieren lassen und eine eigene Halterung für unser Puky Laufrad am Kinderwagen (ABC Design Salsa 4) konstruiert. Da Bauteil wird auf die diagonale Stange geclipst und das Laufrad von oben…
Upgraded bit holder for the M18 drill and impact. Holds 3 bits using tapered grip fins. I made many test models to get to this iteration. Print from ABS or PA-CF. Works best with PA-CF. PLA will not work. PLA is too stiff for the grip…
Hello! I have an updated version of this model that you can find here The second lightsaber used by legendary Jedi knight Luke Skywalker in Star Wars: Episode VI Return of the Jedi. This model is separated by color and doesn't need any…
I designed this for my tools to hang in a work vehicle, hence the clip mechanism. Like this? then check out my M12 Tool Mount (Battery remix); https://www.printables.com/model/225186-milwaukee-m12-tool-mount-clip check out my M12 Heavy…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Made this as a trophy for our risk Legacy game. Had painted by My great friend Mike. Self explanatory Model. (not made to any scale or held to any scale) Also there is a hole in the middle for a dowel or rod to keep it together better…
Print with TPU, 3 or more walls, 0.2mm layer
This is a digital 3D printable model of Nuka Cola caps from the Fallout . The 3D model is a game-based replica, ideal for cosplay or display. Zap that thirst! The download contains Nuka cola cap and 3 other modifications. Bottle opener…
Quite accurate model of Milwaukee sawzall blade. However, the real blade has a little bit of curve to it and the teeth are bend out. Will be good help when creating your own custom handles and blade protectors.
Figura de colección de Rukia Kuchiki con ropa casual
The second lightsaber used by legendary Jedi knight Luke Skywalker in Star Wars: Episode VI Return of the Jedi. This model is separated by color and doesn't need any supports or glue, all the parts screw together and are compatible with…
print how you like but try to keep filament mass below 1100 grams for the parts themselves dimensions: length 20.5 in or 520 mm width 5.6 in or 143 mm height 5.5ish - 7ish in or 140ish - 177ish mm ~~~ depends on wheel and tire ~~~ you…
I've been setting up my new shop and want to hang all my power tools and couldn't find a model for my nail gun. So, I made one! It's a simple model and it has a little 1/8" slit in the center so you can level the print when hanging on a…
Milwaukee 3/8 Stubby Impact Socket Set Organizer CamPossib1e Follow Tools > Organizers IP Report Print Profile(1) All P1S P1P X1 X1 Carbon X1E A1 H2D 0.2mm layer, 4 walls, 15% infill Designer 4.9(14) Download STL/CAD Files 203 473 37 28…
Simply Resized STL from the original to fit a Suzuki Splash 2014 (Probably fit swift as well)
This is a 2 part 6mm ARC Cartridge Insert for Milwaukee Packout ( 48-22-8435 ) case. Typically, when participating in a Precision Rifle Match (PRS) or attending a distance rifle course, you need to bring a fair amount of ammunition. This…
EDIT 3: After a bit of testing and a harsh beating from my coworkers that had no mercy while using those I have decided to create new one. It should be more sturdy, I have replaced slide in cap with threaded one so it will not be so prone…
As with my other holders: The lids fit well. Turn the holder upside down and shake it – the lid will not come lose. Print in PETG if possible. All holders have space for two or six blades, depending on how many you usually need of each.
A few features I put into this: 3mm pilot holes in the disk head can be tapped with a 3mm tap, (or just warm up some M3 screws and screw em in). These are for M3x5 or M3x6 Socket Head Cap Screws, which fit into the guide holes on the…
1:1 Scale Design of Luke's Lightsaber from Return of the Jedi If you want to paint it, I suggest using files 1-4, file 5 is for all in one go Use no supports for File 3 (Top Hilt-Grip), Normal Supports for Files 1 and 2 (Top/Bottom…
I loved the original model but the foot was just a bit too long to fit into my Milwaukee M12 Rover handheld floodlight. This remix shortens the “back” of the foot so it's compatible and the battery now fits into the tool correctly
¡Bienvenidos a España! 🇪🇸 Welcome to Spain! This is a recreation of the bell tower or belfry of the church of St Luke the Evangelist in Cheste, Valencia, eastern Spain. It was built in the XVIII century in the baroque and rococo styles,…
Socket protector for 220V Schuko Plugs Childsafe (you need a key to remove it) Print with support. Category: Household Supplies
Just Ukrainian Alphabet in 3 variants. Font - Noto Serif. Height: 15mm. Extruded for 10mm ---- Оновлено 13.04.26 - Додано букви Її та Ґґ (чомусь пропустив з самого початку) - Додано "перемички" на буквах Її, Ґґ та Йй, щоб можна було…
AMS NEEDED, but not required if you know how to print multi-color without AMS Minimum 220mm x 220mm bed needed. Cat Puke Sign 3MF is all four plates in Bambu Studio Cat Puke Left Sign, Right Sign, Sign Pin, Sign Plug are the individual…
I'm fully embracing the pegboard as the optimum back wall of my micro workshop and am busily designing adapters for the various tools and supplies I want to have at hand. The multimeter is one of those tools, and I wanted a way to keep…
Duplicate 4 or 6 times in slicer as necessary after setting up first bead. I use .16mm layers and just plain PLA. I seem to have more issues with the holes using silk PLA, but if you don't mind a little cleanup than try silk or other…
milwaukee packout compatible wall mount that supports the locking lugs of some milwaukee packout things~!
Screw cover for the Kugoo Kirin G2 Pro
Printed in PLA or PETG.
Remixed Nuki spacer and added two holes for screws to be able to remove original rosette on the inside and to replace it
The lightsaber that was used by the legendary Jedi Knight Luke Skywalker after his father's lightsaber was lost in a duel with Darth Vader. The weapon was most iconically used in Luke's final battle with Vader to complete the young hero's…
The thickness is 6.3mm. I also uploaded a step file that can be easily edited. Print Settings Printer: FlyingBear Tornado Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: HATCHBOX PLA Category: Decor
Will securely hold your M18's wherever you need them most. I've made four versions. All of them will lock/clip the battery in place with the tabs. All of them should be printed in the orientation illustrated below: (The tilted version…
cookiecutter in the shape of Ukraine with the slogan "Make Cookies not War". Send a tasty message for peace in Ukraine! Works with PLA and PETG, watch out for FDA conform filament 205-215°C
This is the TARDIS light switch cover. It will not take you across time and space but it will look awesome when you turn the lights on. Models The switch cover come in 2 versions 1 which is a whole piece and one with top and bottom pieces…
This is far less tasteless than my previous attempt at designing a lampshade. Hence the name. Print it in vase mode and fit to your lamp. You probably don't want to use PLA or PETG for this if you use an incandescent bulb, but hopefully…
Ukraine Trident for make earrings
Redukce z 32mm hadice na 5x16 pro druhý okruh nafukovací vířivky, určený k lepší filtraci a ohřevu. Tisk na spodní straně (jeden kruh) s límcem, min. 4 perimetry, náhodný šev. Výfuky lze tisknout bez podpor. Materiál ideálně ASA, použít…
If you are having trouble with the transfer case being stuck in neutral, you may need to replace the shifter bush. To remove the shifter bush, remove the boot on the inside of the vehicle, then remove the boot on the transfer case, then…
Its my second rivet ends box model for a Milwaukee M12 riveter. You can find my first model there: https://www.printables.com/model/1064723-milwaukee-rivets-container After a bit of testing with the previous model and a harsh beating that…
This is a case for the Milwaukee Tool 17-Piece Metric Tap and Die Set. I wanted to limit the tool layout to the smallest possible footprint while leaving room for accessing each of the tools / bits, which is why the M7 drill and tap are…
This insert fits all of: Tsukuyumi Full Moon Down (PL) Sunrise Kingdom expansion (PL) Nowe Lądy expansion Dark Crusade faction 2x Gracz+ into original's game box.
This cover-plate for UK wall-mounted light switches will hold a SONOFF SNZB-01P Zigbee Wireless Switch without the magnetic plate. It's held in place by friction, so a snug fit. Print Settings Printer Brand: Creality Printer: Ender 5…
Etykieta do systainerów SYS3 firm Tanos / Festool z logiem firmy Milwaukee. Sugeruję drukować w dwóch kolorach. Montaż pokazany na ostatnim zdjęciu.
![[complete] RC GMC DUKW (amphibious military truck)](https://media.printables.com/media/prints/e0064677-0b6e-41c0-b980-4267fec9eb77/images/10390813_aec2894b-aac3-4826-ae1f-d88afdcafb64_aae61d49-8d59-403c-aefa-ff5e16396540/img_6149.jpeg)
