Counting matching models…
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
I created a LEGO ruler based on the original design back in 2009 by LEGO themself. I added different high levels to be able to see the plate and brick height a little better. Printed with the default 0.2 mm PLA setting from prusament. Add…
This is a 1U Server Rack rack/shelf designed initially to rack mount a bunch of Raspberry Pis. Each 1U shelf should hold up to six Pi 0/3/4/5 or some mixture with accessories. Every attempt is being made so that no supports should be…
This is ruler Measures in both Metric Centimeters and Imperial Inches. As I live in America I found myself needing a ruler in inches (Even though we all know that Metric is the superior unit of measurement) while I could only find ones in…
Update 05/02/2025: I've made a change that further highlights the millimeters, making it even more functional. I created this simple yet effective tool to find the center of any cylinder, up to a maximum of 180Ø mm. Thanks to the external…
Update from 2025.02.22: I added a slightly shorter version (6.5u instead of 7u) that is compatible with 220x220 beds This ruler is perfect for measuring stuff like drawers, pens, pliers, and more—all in Gridfinity units. It’s based on the…
Material: PLA 0,4mm nozzle Layer height: 0,08mm Block: 2 walls / 15% infill Screw: 6 walls / 15% infill
0,20 mm Quality, Infill 50%, Support Organic
I've perfected this simple yet effective tool for finding the center of any cylinder, now extending up to 30 cm / 23 inc in diameter. Thanks to the new ergonomic protrusion, it's more maneuverable and easier to grip during use.…
If you can print 252mm long, you can print the 6-grid-version. If you have less print capabilities or definitely want the 5-grid-version, use this. Slider and Pin fit both. At 3.8mm or adequate (depending on your layerheight) you may…
This tool allows you to draw lines easily. it is quick to print and handy, and at the same time very useful. scales: 5-29 / 5-49 / 5-100 mm 0.25-1.25 / 0.25-2.5 in versions: -inlier - smoother surface, does not require supports -outlier -…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
Print straight, with the base of the hexagon where the hook comes out resting on the print bed. Does not require supports.
Holds a ruler to the HSW solution. I modeled with an -0.15 offset, so no need to size. It's print and play and should (depending on your printer's tolerances) snap into the HSW blank insert that can be found on the original HSW post.…
I designed a 3D printable string action gauge/ruler that can be used to measure the string action on a guitar or ukulele. It features measurements in both millimeters and fractions of an inch. It can be optionally printed in two colours…
📝 Description The Ruler Stop S is a compact and precise stop designed for 0.5 × 15 mm rulers , ideal for workshop use, model making, and DIY applications. To make it максимально flexible, the model is available in four versions (M3, M4,…
A physical reference tool for students learning CAD and 3D printing. It helps turn dimensions on a screen into something you can actually see and touch. Includes: 200 mm ruler Hole diameters Wall thickness Gap / slot width Text sizes…
Metric ruler with steps of 1 mm. Measures up to 15cm. Best print with a layer height of <= 0.1 mm. Print instructions Best print with a layer height of <= 0.1 mm.
The latest 3D-designed Sewing Edge Ruler is a tool tailored for utmost precision and flexibility in sewing projects. Engineered with metric measurements, it features detailed markings for both centimeters and half-centimeters, catering to…
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
Adjustable ruler positioning block. Highlights: Fits rulers of different sizes. Fully 3D printed, no hardware required. Just add ruler. 90° and 45° angles. Use as depth gauge, tightening nut secures measurement. Printing Tips: Model is…
EN: This part makes smooth and accurate folds child's play. Each long line marks a whole cm, each short one half cm. DE: Dieses Teil macht gleichmäßige und genaue Fälze zum Kinderspiel. Jeder lange Strich markiert einen ganzen cm, jeder…
You might also like: https://www.printables.com/model/280185-design-reference-radius-ruler-innerouter-1-to-12mm In the computer everything looks huge, but in reality 1mm could be enough or may be too flimsy depending on what you’re trying…
This Mighty StealthRuler has been designed for every printers . Stop using a caliper to mark your filament to 120mm and 100mm ! Now, you have this tool that will assist you when you calibrate your extruder and will Never Gonna Give You Up…
A plate with a peg to hang a ruler off. Or anything else that fits on a 5.5mm peg! I modeled the base on the caliper holder by Synthetic_Future, which in turn is based on Brian.Kuos model. After trying out a couple of different…
Ruler and marking gauge in cm/mm for woodworking. Comes in two lengths 10cm & 20cm with a hole at every mm. Background Searching for a ruler solution to marking wood before cutting, I found the model I remixed. Rebuilt the model from…
15 and 23cm metric ruler with "transparent" letters and digits.
🐱Cat Ruler - A cute and functional stencil ruler featuring various cat silhouettes. Perimeter generator should be Classic and not Arachne Inspired by Japanese Neko Rulers, this model was designed entirely in Fusion 360 for absolute…
Use 0.24mm layer height, 3 walls. A compact miter box designed for cutting small round rods, square strips, beams, dowels, and similar materials. The tool includes saw guide slots for: • 90° • 45° • 30° • 22.5° The 45°, 30°, and 22.5°…
This Metric saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking…
This 3D printable shoe sizer features a two-part sliding design that measures foot length in both EU (left) and US (right) sizing systems. The base unit covers up to EU size 27. For larger feet up to EU size 46, simply print the optional…
Handy ruler with extras 📏⚡ • Holes for measuring wire & component diameters 🧰 • Connector size templates 🔌 • Basic electrical symbols ⚙ • Centimeter scale for precise measurements 📐 Perfect tool for makers and electricians! 🛠✨
This extension can be printed with PLA in one or two colors to improve readability. A basic metric ruler is needed, the extension need to be glued aligned with the 1 to 7 marking and the first 7 centimeter of the ruler. This pattern…
Ruler Marking Gauge (Boltless Design) Here is a unique, fully 3D-printable marking gauge that clamps directly onto a standard ruler! This is a simple solution that requires zero additional bolts or nuts — just print the parts, assemble…
Remix of the 9mm small thread flathead t-bolt for Multiboard to allow for knub which can hold a ruler with a hole. https://www.multiboard.io PLA+ 0.2 Layer Height 3 walls 15% infill
This is a simple ruler hook inspired by “HSW Ruler Holder” from Jungl3. The original design wasn't quite the right size to fit into my rulers, so I created a similar hook in OpenSCAD. Uses standard hex insert from RostaP's Honeycomb…
This is my design of a ruler in centimeters and inches. They are both 160mm long and are extremely precise when compared to a standard ruler (see picture). The first file is of the ruler in inches and the second in in centimeters. A…
Material: PLA or PLA+
If you like my work, tinkering and messing around with stuff. Then please consider supporting, it would be greatly appreciated! I'll be looking forward to interact with you guys and our shared passion for making! :)…
Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm
Supports: No Infill: 20 - 50% Walls: 4 Layer Height: .2mm Nozzle: .4 or .6 ( works best on .4mm nozzle) Print-in-place design. Move the arms around a bit to loosen the joints at first. No supports are needed. I used a blurring tool to…
Mini Folding Ruler 30 cm - Metric Folding ruler that fits in your pocket! 30 cm long when unfolded. Precise and pretty strong for its size. Completely snap-fit. It features a stopper to make it unfold straight. It took many iterations to…
Hardware required: socket head screw: M5, length: 15-35mm
Upgraded articulated print-in-place ruler, now also on Printables! I use this for wargaming, the starting end is curved to fit nicely to a model's base. Upgrades: The joints of pieces are now positioned so that smaller lengths can more…
This print in place design contains a ruler with metric scale and more. The following features are integrated: Stencil for angles of 30°, 45° and 60° - That can be used on edges by bending. Ruler with metric scale Round holes for checking…
For precise woodworking projects I use steel rulers to measure and mark: a small stopblock is a nice addition to transfer repeat dimensions. I like the Rumold steel rulers, they come in various lengths: Art. 323713 - 300mm / Art. 323715…
Folding ruler holders for the honeycomb wall. Remixed to add fixed attachment Needs support Buy me a coffee
NOTE: An improved version of this is available for purchase on my Etsy store . While you can download and print your own here, purchasing from my store gives you additional benefits: The M3, M4, M5 and M6 threads are pressed-in aluminum…
Metric ruler with steps of 1 mm. Measures up to 20cm. Best print with a layer height of <= 0.1 mm.
An EZ Print multi-angled ruler with Imperial measurements designed for easily marking dimensional lumber on a work bench or saw table. It requires three (3) M4 pan-head screws (recommended) or adhesive for assembly. Layer height 0.15mm…
Print your desired color for the body, then change filament at the last 0.3mm to make the labels stand out.
This 12-inch/30cm ruler features distinct markers for - Metric: -1cm, 5mm, and 1mm Imperial: -1 inch, ½ inch, ¼ inch, and 1/16 inch Model is oriented to print on a MK3/4 in a standing-wall orientation. 3mm brim recommended. Printed at…
I have always had a problem how to measure the profile depth of a car tire. With this simple tool you can immediately determine if the profile depth falls below the permitted minimum (1.6 mm) and how deep the profile is (This can be read…
Dnd Spell Templates and Movement Ruler All models are meant for use with 1-inch battlegrids and minis. Included: - Partial Sphere/Circle- 40ft - Partial Sphere/Circle (small) - 20ft - Full Sphere/Circle - 20ft (FIREBALL!) - Cone - 40ft -…
Compatible with a 13mm wide ruler. Block is best printed laying on the reference surface. Bolt standing on its head. 0.4mm nozzle, 0.2mm layer Info: Old model I used to upload to Thingiverse in 2019.
I focused on functionality, ergonomy and good guiding and sliding when drawing. Ideal for home maker, wood workers. I often need to draw long parallel lines or draw right angles. . That is why the front part is also rounded and wider to…
Fashion Illustration Ruler for garment pattern design, for designing various styles of suits, coats, trousers, dresses, and work clothes.
I found it awkward to try to mark filament while attempting to hold the filament flat against a ruler. I designed this to make the job easier and more accurate.
Added a model with large thread tolerances! Friends, give me feedback! Attach your photos of the work, I will try to help with the model and tolerances!
You have the option to print the rulers in your preferred size. I suggest a minimum of 4 outlines and excluding solid fills to accentuate the pattern of the inner filling.
I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…
Universal tool for taking measures and making marks on rectangular objects. Contains both metric and imperial units. Ideal for wood workers, but also usable on plastic, metal or many other materials. Also contains templates to mark…
Just a simple 6-inch ruler I made for Printables. Should do fine without supports.
another ruler hook remix for hang right or left side of the honeycomb wall 30mm margin. 4 orientation included. i added scad files and bottom alternative which don't need support. V2 update: after some valuable feedback. i update the…
This is a remix from 2 models: I mixed board mount from hooks i like and ruler holder part from another model. Hook is designed not to fall out of place. Ruler mount is slightly decreased to 5mm. I print it with 0.1mm layer with no…
This is the Medium version of the Ruler Stop designed for rulers and scales with a cross‑section of 0.5 × 15 mm . A more compact Small version is also available here: 👉…
Parametric woodworking marking-gauge (for 26mm ruler REMIX) need small nail Print Settings Supports: yes is better Resolution: 0.2mm ------ Happy Print to the whole community :)
https://cults3d.com/fr/mod%C3%A8le-3d/divers/articulated-eevee
Lock off any measure along your steel rule and then rapidly mark this distance off again and again. I use M5 nut and…
My laser cutter is up on risers for rotary engraving so I didn't feel like laser cutting the ruler, here's a 3D printable version of it.
Drawing Curve - ruler for drawing curves
The DaggerHeart TTRPG uses relative ranges (melee, very close, close, etc) as a part of the game mechanics. This tool allows tabletop players to better envision the distances. This design was inspired by a reddit post from u/FaileasDhan…
Drilling holes on a perfect pitch becomes a piece of cake... Drill the 1st hole. Place a screw or loose drill in the 1st drilled hole, set the desired distance between the holes and drill the 2nd hole in mm (or 1/16 inch) accurately…
My version of this practical marking gauge, designed for folding rulers common in Europe. I made some modifications in the OpenSCAD file to better fit these rulers and to remedy some printing problems I had with the initial version.…
A collection of self made rulers and range rings for spell effects and area of effect damage, based on a 1 to 1 scale with default DND miniatures: 25mm is 5ft. A 1 to 3 scale is also included, see below. These can be used in table top…
A fun challenge for your printer and a useful print! This ruler can be printed, in full, on a Prusa MK2/3/4 printer - you just have to have it oriented right! The included 3MF will orient the ruler in such a way that you should be able to…
Discover an efficient way to store and display your rulers on your Multiboard wall with our imaginative 3D model. Say goodbye to magnetizing your rulers as this innovative 3D display model is easily accessible and customizable to any…
Universal 3D-Printable School Ruler Set Get ready for the school season with this comprehensive, 3D printable geometric set! This collection includes four essential tools designed for students, makers, and anyone who needs reliable…
A simple holder for folding rulers, mountable on a french cleat wall. Available in two sizes: big: 12 rulers small: 9-10 rulers For each holder you need two french cleat adapters. For assembly you also need four M4 nuts and four M4…
Sometimes, you don't just want to measure a straight line. That's why I created these print in place flex rulers - simply print them two coloured and you have your perfect ruler to measure charge distances or movements. The tolerances are…
Customized version of http://www.thingiverse.com/thing:109739 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=109739 Instructions Using the following options: NumberSize = 7 FontSize = 10 NumberOffset = 0…
I wanted a Gridfinity holder for my Mitutoyo caliper where the caliper lies fully flat so that its pointy bits aren't sticking out. Behold this immense 6x2 box! Besides holding a 150mm caliper, it also includes two thin slots that are…
Multi Ruler Pro - multifunctional stop for steel rulers for rulers size: 25 x 1 mm Features: Center finder for rods, cylindrycal objects and prisms (rods up to 45mm diameter, prism unlimited) 90°, 45°, 60° marking *Indirect radius…
Originally a ruler holder designed for TB Crafts, they have generously allowed for the model to be shared with the wider world. The design is a simple quilting ruler holder that can store up to 8 quilting rulers. I have included both…
Easily measure and set sag on your mountain bike fork. This is based on a previously commercially available product called the saggle, which appears to no longer be available. You can use a regular ruler of course, but this is more fun!…
A Seam Guide Ruler and Magnetic Seem Guide. Each opening down is 1/8 more that the previous. Made a big and little one. Magnet holes for the guide are 8x3mm
Compatible with LEGO bricks. Can be printed in one color, but to make numbers more stand out, then color change at 1mm is suggested. I've added a Prusa MK3S print file with color change already applied (on 39 minutes). Printed with 0.15…
I wanted a holder for my folding ruler for HSW. I found this one and liked how it looked, but I wanted something that did not need screws, so I took my first baby steps in onshape and designed these myself. Obviously you'll need 2 of them…
A set of rulers with a cutout designed for drawing a grid onto fabric such as aida. There are versions for 11, 14, 16, 18, and 20 count fabric. They have the count engraved in the surface to make it easy to tell them apart. To use, simply…
As a maker, I'm constantly looking for ways to maximize the utility of the gear I use. Why should any tool have only one purpose? This simple print will instantly improve the form and function of a standard fine point Sharpie marker. Take…
Metric ruler with steps of 1 mm. Measures up to 15cm. Best print with a layer height of <= 0.1 mm. Print instructions Best print with a layer height of <= 0.1 mm.
Designed by a professional engineer in her spare time, this no-nonsense ruler/combination square allows you to quickly measure objects for lazy gridfinity-ification. This model focuses on practicality, minimal filament usage, and ease of…
Pocket Ruler that fits a pencil inside 17cm length This ruler is designed to go with the following pencil: https://www.amazon.com/dp/B09L3ZQL84%20/?tag=whatthefilame-20 I've included the step file so you can update to fit the pencil or…
My friend needed a combat key for his campaigns so I designed and printed a bunch of these!
The dispenser is printed with Prusa's clear PLA and an 0.6 mm Nozzle. I recommend supports and a layer-height of 0.30 mm
NEW Added three slot version to support a mini 3d printed toothpick. Can use the original tooth pick slot for a fire steel. For best results you'll need a 0.2mm nozzle. Included a couple other versions of the opposite side in the 3mf.
In 2 pieces to maximise strenght, doesn't require any hardware. Has markings by every 1mm, 5 and 10mm are highlighted! Installation: Push the square into the bottom piece as far as it goes and then use a hammer to tap it in all the way.…
