Multi Ruler Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multifunctional ruler stop for steel rulers - RULERS SIZE 25 mm x 1 mm
- Rating
- 4.6 / 5
- Likes
- 177
- Downloads
- 484
- Makes
- 5
- Views
- 3,056
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Multi Ruler Pro - multifunctional stop for steel rulers
for rulers size: 25 x 1 mm
Features:
- Center finder for rods, cylindrycal objects and prisms (rods up to 45mm diameter, prism unlimited)
- 90°, 45°, 60° marking
- *Indirect radius measurement
- Dimension transfer
- Parallel marking
- Depth measurement
Benefits:
- For 25x1 steel rulers - most commonly used
- Modified self-threading screw allows for strength and easy printing@Lightweight design - only 15g saves filament and weight
- Parallax removal for accurate ruler reading
- Printing time only 1h (standard 0.4 nozzle, 0.2 layer)
This model is the result of my experience with the previous stopper for steel rulers. I wanted to improve the design and include as many functions as possible in one and this is the result. An invaluable helper for every DIYer and in every part. It will be appreciated especially by carpenters, but the range of uses makes it a helper for every household. Don't waste money on a lot of separate measuring tools. With this one, you will do most of your work easily and accurately.
*Indirect radius measurement is performed by placing the measured rounding against the front part with a 90° recess. The length of the ruler extension until it touches the radius is then measured, measured from the vertex of the right angle in the middle. The value is then multiplied by 2.4142 to give the radius.
Printing tips:
I recommend printing at a layer height of 0.12 with a nozzle of 0.4. For screw strength I recommend 4 perimeters and a 20% gyroid infill.