263 models
No special printing requirement I used 6mm dia x 1mm thick N42 Neodymium Magnets small amount of super glue to hold the 3 magnets together & then glued them to the visualizer. I printed with the following: 0.15 Layer height 3 Top & 3…
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant
A parametric RPG dice holder for 1d4, 1d6, 1d8, 2d10, 1d12 & 1d20, decorated with a stylish Japanese kumiko pattern. I designed this around the exact measurements of my Rime of the Frostmaiden dice set so the fit may not be ideal for your…
Print approx. €2.82–€3.44 excl. taxPreliminary estimate for one variant
This is a quick adapter I made that lets you use the Denon AVR cardboard mic Stand for the UMIK-1. The finished print should fit the UMIK-1 snugly, but not too tight. Scale down or up 1% to desired tightness. This can be made with either…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Designed to enhance desktop storage efficiency, this pen holder combines an Elongated Hexagon shape with Kumiko-style , blending Japanese minimalism with practical aesthetics. Available in two size options Version A : 95 × 150 x 100 mm…
A Kumiko-style pen Holder designed for your workspace. It features 9 compartments for storage , efficiently organizing different stationery and tools. Dimensions : 95 x 95 x 90 mm The slanted design makes grabbing tools more…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
A Superellipse Kumiko-style pen holder designed for your workspace. It features 7 compartments for storage , efficiently organizing different stationery and tools. Dimensions : 95 x 95 x 95 mm The slanted design makes grabbing tools more…
Slope Can is a compact desktop bin that keeps your workspace tidy — whether it’s paper scraps, tools, or small essentials. Its gently slanted opening and refined Kumiko-patterned surface bring beauty and practicality to your daily setup.…
I noticed that sticky note boxes usually lack a lid design. To enhance portability, I designed an integrated lid that not only provides a new option but also makes carrying and storing sticky notes more convenient, while also…
Here is the tall Japanese Shoji Lantern which is fully compatible with the Bambu Lab LED Kit 001 . Inspired by Japanese aesthetics, It's ideal for anyone who appreciates traditional Japanese design, creating a peaceful, zen-like…
I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…
This design is inspired by the traditional Kumiko Asanoha pattern. I wanted to reinterpret it through a unique structure and super-elliptical form. Beyond preserving traditional aesthetics, hope to add new creative elements to traditional…
A replacement for my original chopstick storage box. I added the Kumiko to give it a more traditional look. Prints with no supports and 100% infill. Internal box dimensions are: Small Box 260x35x20mm, Large Box - 260x65x20mm Update! Added…
A remix of the 54 mm Umikot for the 51 mm post-millenium La Pavoni filterholder. See the 54 mm version for instructions. The basketdepths are: Standard double: 26 mm IMS 14-16gr: 25 mm (not tested yet!) IMS 16-20gr: 29 mm (not tested…
With this version, the planter has been upsized to 125mm (4.5") , making it suitable for a wider variety of plants. The form remains true to its design roots, elevated by a base inspired by traditional Japanese stone lanterns . The base…
Inspired by traditional Japanese design, this planter features an elegant Kumiko pattern, complete with a drip tray, sturdy legs, and a decorative outer shell. The plant's water tray has a small hole, making it easier to check the…
An all in one needle cutting guide and bending tool for redfoxdude 's popular Umikot (58mm Version) - Planetary Gear Spirograph Espresso WDT Tool . It's uses the needle length (35/25mm) as the reference, so it's compatible with both the…
The stl files work for my case, in you'll need (in addition to the materials pointed out by redfoxdude) 4 3x10x4mm bearings (pressfit into spinring) and about 40x 4mm ball bearings. EDIT: forgot to mention I also incorporated heatset…
A tamping station compatible with Lelit 58mm portafilters (PLA580*) for the Lelit Glenda and similar espresso machines. There are two versions, one is a simple tamping station with slots for the ears of the portafilter and the other is…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the Handle and Spin Ring parts without the countersink. This allows the use of non-flathead/countersunk screws. enable support for the handle…
Inspired by traditional Japanese design, I plan to design a series of Japanese bonsai. This planter consists of three components: the main bonsai vessel featuring a Kumiko pattern, a detachable drip tray, and supporting legs incorporating…
A plant pot inspired by the Kumiko style wood decor theme. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Remixed base for Delonghi Dedica EC685 bottomless portafilter with 26mm IMS Filter Basket
This is a remix of the great Umikot by @redfoxdude https://www.printables.com/de/model/481587-umikot-58mm-version-planetary-gear-spirograph-espr (more remix information at the end). How to use: Use the printed funnel (base) and pour the…
Found this style of lamps on youtube. Wanting one for my living room, but having no woodworking skills to speak of, I threw this together. The lamp is compatible with a EU E27 style connector w. lock ring. It should be large enough to…
This remix is my version of the plates in form of Kumiko ! Kumiko is an ancient Japanese woodworking (skill) to create panels by assembling small parts of wood without nails, just glue and geometry ! Enjoy this version of mine thanks to…
Enhance your workspace with this functional and stylish iPad Stand Drawer Riser. Designed to integrate perfectly with the original design - iPad Stand Riser. Optimal Viewing Angle: features a 2-degree tilt, ensuring a comfortable and…
An isolating shock mount for the miniDSP UMIK-1 measurement microphone. The mount is intended to be installed on a monopod, tripod or selfie stick with a ¼" or 3/8" screw. It isolates the microphone from a broad range of vibrations, which…
This fits a 120mm standard computer fan. I am using a 120mm fan that is powered by a 10w solar panel. The shroud snaps on and was a press fit for me, but you can also screw through it into the fan mounts at the corners.
a 12" square Kumiko pattern
Made fore the Delonghi Icona Vintage portafilter 52mm porta filter with 2 locking lugs Larger needle handle hole diameter for easier install Link for needles: https://s.click.aliexpress.com/e/_Dl6Knir
This is a needle depth/size cut guide. Slide the needles in and cut (ideally using angled cutters to get flush with the edge) Two guides are available, one for 55 and one for 65mm. Both have 5 slots which can all be loaded at once. Update…
I love this model but using the handle sometimes ended up lifting the wdt off the portafilter. Remove the handle and add some grip to the spin part giving more control over it. This remix is for the 54mm portafilter. Update 5/30/23 added…
I printed it with generic PETG 0.2mm layer height. Printing upside down (threads facing bed) does not need supports. Dimensions Height: 23 mm Spacing between tabs: 23.5 mm
I designed a Kumiko pattern and a matching frame that does not require multi-color printing — a single filament color is enough. You can choose any color scheme that suits your style. The project includes 3 files: the Kumiko pattern, the…
Easy assembly with no glue required.Side panels must be printed in a separate transparent filament.
I designed this Kumiko-style tissue BOX to combine traditional Japanese craftsmanship. The magnetic lid design, in particular, makes refilling tissues effortless while maintaining a sleek appearance. Inner Dimensions: Tall : L120 x W114 x…
This is a Asanoha Kumiko patterned tissue box cover I made to be printed in vase mode. Contains both single print tissue box cover, and two piece tissue box cover. For 4.5inx4.5inx5.25in tissue boxes. (115mmX115mmX130mm) Printed in…
Be careful, you need to change the needles size. Update: the needles size: In green: 22mm (4x) In yellow: 27mm (1x) In orange: 32mm (4x) In red: 37mm (1x)
This is a Kumiko jig block. Kumiko is an ancient Japanese woodworking technique used to make the latticework seen in shoji screens and sliding doors. Kumiko patterns are created using wooden laths cut to form various geometric patterns.…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the lug-flanged base files with cutouts for three lugs. This is for compatibility with the Breville Barista Max's portafilter. See the…
Replacement Rummikub leg/food with adjustable parameters for your liking. Suggested Print Settings Layer Height: 0.12 Infill Density: 100% Infill Pattern: Lines Generate Support: Yes
I was inspired by the original design by TanyaAkinora , a lamp in the style of Kumiko Shoji. So please read her original project description for more information about this style of Japanese architecture. Summary of the changes I have…
I'm thrilled with Josh Makeshift's IKEA KALLAX cabinet door model , but I wanted different doors. Wanting to try my hand at Kumiko-style modeling, I went with the Kakuasa pattern and I'm super happy with the result. All instructions…
Gridfinity organizer for 0-1" and 1-2" Mitutoyo 293 Quantumike digital micrometers. May fit other versions but I have not verified.
As there was no 54mm version of v2 Umikot I decided to remix it myself. Tested it on stock Sage Bambino Plus double portafilter and a cheap basket I got with a bottomless portafilter. Used the Umikot58 - Mech V2 , Umikot58 - Spin Ring V2…
The original version of this model is excellent, but I wanted to make a slight change which would allow the outer face of the top section to be used for turning the assembly instead of a knob. The extra thickness should also increase the…
This is a remix of @redfoxdude_386759 Umikot - Planetary Gear Spirograph Espresso WDT Tool Love the original design, which look great and work perfectly, thanks again for the amazing design and hard work. But after use it for few days, I…
revised version of https://www.printables.com/model/481587-umikot-58mm-version-planetary-gear-spirograph-espr for lelit
With the original 25mm Long Tab base, one of the long tabs hit against the handle of the gaggia portafilter, misaligning it. In this remix, the tabs have been readjusted allowing the Umikot to fit nicely on a JoeFrex Gaggia portafilter.…
I changed the 22mm base to work with my quick mill portafilter: -removed deep pocket since the basket lip is very thin -added 3 lugs (instead of 4) for needle protection
Confirmed working. Update 05-11-2023 Confirmed working and slightly modified 29 mm version Update 31-10-2023 Added 22 mm base and corrected depths The Umikot adapted for the 49 mm pre-millenium La Pavoni baskets. It's the same size as the…
This Umikot compatible tamping station for Rancilio Silvia Portafilters (botomless or stock tested) can fit Umikot with bases ears/lug width set for LM (28,5mm) (see workspace on original work). I keep the design minimal so that it can be…
This design holds the MiniDSP UMIK-1 (or similar microphone) about ear level at the headrest. It utilizes the holder and tripod that comes with the mic to hold it in place. Simply place the tripod through the hole and open the legs out to…
Well, I was printing a lot of random stuff when I first got into 3d Printing. My wife finally said, “Why don't you make something useful?” I asked what and she said, “make me a jewelry box.” I had recently done some kumiko woodworking so…
An extra large version of my recently popular Kumiko Storage Box Set . The dimensions are 220 x 160 x 80mm, and the top border is now 8mm tall for increased rigidity. Recommended Print Settings Layer Height: 0.2mm Perimeters: 3 or more…
The tolerances should allow it to be used with needles that have the metal or the rubber handle. With needles that have a <20mm handle and a needle length of 40mm (without the handle) there is no need to cut the needles. The files contain…
I threw together some jigs to cut kumiko pieces to make various patterns. In my opinion they turned out roughly on par with my own wooden jigs but with far less hassle. But I do expect quality wooden jigs to be more durable in the long…
An easy-to-print and lightweight storage basket displaying the simple but elegant Mitsukude ( 三 つ 組 手 ) design. It comes in four different sizes: 160 x 100 x 50mm 120 x 80 x 50mm 80 x 60 x 40mm 60 x 40 x 30mm Recommended Print Settings…
Refer to the original post for any printing settings or assembling guide. I made this with the intention to suit my needs so only adapted the options I wanted.
In this mod, the short Mech is V2 modified to receive 4x m3 heatset inserts. The Spin Ring V2 is modified to receive 1x m3 heatset inserts. This avoids the need to directly thread M3x12 into plastic. Direct-thread M3s are…
I am no longer maintaining this remix and have stopped following along with the revisions for the Umikot. I no longer use it for my prep workflow. YMMV I improved the Umikot mechanics with Thrust Bearings for a smooth, maintenance free…
This custom-designed Tamper Station is the perfect companion for the Umikot 58mm planetary gear espresso tool ( Umikot on Printables ). It offers dedicated slots for: Dosing ring/funnel Tamper Distributor/Leveler Puck screen Bottomless…
Using same needles and same countersunk bolts. Trim needle handle to 7mm and add 20 and 30mm for the actual needle. No mods beside needle positions to make them work when scaled. Will work with standard 49mm Pre Mil La Pavoni and IMS…
Printing This model consists of five seperate parts, each indicated by the leading number of the stl file. For parts 1 & 4 there are two version available, so pick one. All parts printed with 0.20 mm layer hight. Part 1 - Handle Print as…
cutout in upper mech and spin ring for 6.35 mm ball bearings:…
This OpenSCAD file allows you to create an intricate Kumiko design, a traditional Japanese woodworking technique known for its beautiful geometric patterns. Utilizing the Belfry OpenSCAD Library (BOSL2), this generator provides a some…
From time to time, my Apple Watch was knocked off the charging cable by accident causing it to not completing charging. It was quite annoying as the watch would be left useless without proper charging. Hence, an Apple Watch stand is…
Same idea that as this remix Umikot 58 WDT Grip Spin Ring by bsprange | Download free STL model | Printables.com But fits 54mm Breville version. You need to use 16mm screws. Texture is pulled from the upper mech so looks pretty nice to…
This is the Fith of my Kumiko inspired tea light lanterns. There are 3 different bottoms for different LED tea lights and two different walls. Also includes "half walls" for a shorter lantern. All my "half wall" and "full wall" designs…
I am no longer maintaining this remix and have stopped following along with the revisions for the Umikot. I no longer use it for my prep workflow. YMMV I wanted to find a way to fine tune how the grip spin ring operates and create a…
This is the Fourth of my Kumiko inspired tea light lanterns. There are 3 different bottoms for different LED tea lights and two different walls. Also includes "half walls" for a shorter lantern. All my "half wall" and "full wall" designs…
This 3D are remix from below product: https://www.printables.com/model/569582-umikot-54mm-version-planetary-gear-spirograph-espr modify part: modify middle frame to fit 9barista handle lower stand & middle frame add magnet to make easy…
The stock 58mm Umikot works well with the Cafelat Robot - all except the stand. The Robot's deep basket requires longer needles than a typical portafilter basket. This deeper stand will allow you to store the Umikot with those longer…
This holder was design to hold rectangular shaped cotton pads. A sample GCODE file sliced in 0.2mm layer is attached for easy reference. User may also make their own GCODE files to suit their needs by slicing the 3MF file attached. The…
This project is a light weight phone stand. It is a print-in-place design that no assembling is needed. Also, the stand is foldable for easy carrying. In compared with my previous designs, this one reduced weight drastically by…
Custom fitment adapted from the original. Generated through configuration page on OnShape page. Fits La Marzocco Linea Micra. Mini untested.
This take reduces the number of base pieces from two to one. The base no longer requires M3 inserts, M3 screws, or M12 nuts. Due to the higher density of the Hemp Leaf shade, I also relaxed the printing requirements of the screen and…
Umikot 58mm block for the coffee blocks knock box.
Upon Special request I have adapted my Kumiko design skirts to fit the much loved V2.4r2. This is for the 250 - 300 and 350 sizes! Yes all three! These will add a touch of fine design to your skirts to really make them stand out from the…
This is the Second of my Kumiko inspired tea light lanterns. There are 3 different bottoms for different LED tea lights. Also includes "half walls" for a shorter lantern. All my "half wall" and "full wall" designs are interchangeable with…
A simple angle jig for 15, 22.5, 30, 36, 45, 54 and 67.5 degree angles. I use them to make inserts into 60 and 108 degree corners for my icosaeder and dodecaeder lamps. The other angles are used in Asanoha Kumiko. I printed it with 15%…
A minimal phone stand displaying the Mitsukude ( 三 つ 組 手 ) pattern, with a cutout for charging cables. It was designed to be printed on its side without supports, but you will want to have your bridging settings dialed in for the…
The Umikot is great! However, I didn't like that the screws needed to be tightened most of the way then backed off ¼ turn, as that resulted in occasional binding and screws tightening/loosening during use until I added loctite to hold…
To print it you may need to rotate the model 180 degrees on the Y Axis. included with the STL is a pic with the needle length, the length is referring to the length that is coming out of the bottom of the tool after inserted. I suggest…
Long needle version of the 54mm Umikot V2
A over the top "kumiko" lamp shade. Glue can help, nothing is perfect 🤷
Kumiko Sterne – modulare Muster für den 3D-Druck Diese Kumiko-Sterne sind von traditionellen japanischen Holzverbindungen inspiriert und lassen sich flexibel kombinieren, skalieren und variieren. Die einzelnen Elemente erzeugen – je nach…
I was delighted with BooKoo Coffe's electric WDT tool, but missed the precise planetary gearing of the Umikot. So I decided to combine the best of both worlds. This remix is suitable for 54 mm portafilters (Sage / Breville). Print the…
Having only 30mm handle needles I was determined to not buy another 500. Thanks to Tyler having his model available I was able to make the required adjustments to use longer handles as used in the original umikot models. Please follow the…
Non-Printed Parts Needed 4 M3 Threaded Inserts 23 Magnets, 6x2 mm 4 3m Screws 12mm long 4 3m Washers 4 3x10x4mm Bearings 4 O-Rings 1/8 x 3/64 10 0.35mm acupuncture needles 44 BB's Super Glue You can see the model on TinkerCad Print the…
StealthBurner cowling for KNOMI 2 With Rapido UHF Kumiko This Fancy Kumiko SB Cowling was a special ask from a fellow Voron member and took quite a few hours to get the Kumiko pattern to follow the contours of the SB. But the hard work…
Coasters with beautiful Japanese Kumiko patterns. Comes in 3 unique styles: Asanoha, Mitsukude and Sanjyubishi. Each style also comes in 2 versions - with a base and without. The base is added so that liquid doesn't fall through. It is 10…
Japanese Kumiko Style Panel Lantern. Contains the following Patterns: Loose Triangle Tight Triangle Loose Hexagon Overlapping Hexagon Blank Pattern
To start off, print the 30mm base and then adjust the height to desire needle length using these adapter (see reference in Umikot detail). Due to the length of the thread of the screw on the body, can only go down to 23mm depth. 7mm =…
I designed this knob for the Umikot to allow 1 finger operation. I find this more ergonomic and pleasant to use. To install this knob, use a 12mm M3 countersunk screw, as with the normal handle.
UPDATE 1 - Added alternate plates with the triangles rotated 90 deg. This allows for vertical lines in patterns instead of the horizontal line in the original. Added half versions of the inserts to fill the edges of the panel. Model…
This remix adds a small lip to the spin ring to keep it centered and not create an elliptical motion in use.
I created this because I disagree with the other Robot builds that suggest downsizing the 58mm Umikot to 94%, I want my as much of my bed as possible whisked. To this end, build the standard 58mm Umikot at 100%, and print this, it will…
![Kumiko RPG Dice Holder [Parametric]](https://media.printables.com/media/prints/82eb7505-58de-4e60-b337-2c383a0f003f/images/10872560_c1d5f70e-d21f-493c-abb2-33b7298bc920_60912808-6c92-4b47-b8f3-853fea033c37/basic-kdh-edited-render.png)
![Umikot (52mm 2 lug Remix) - WDT Tool [Delonghi Icona Vintage]](https://media.printables.com/media/prints/601840/images/4788734_631ba4c7-2476-4606-b1fc-b154c6b5211a_2cdecddd-a72f-430a-be3f-bc115fa7711d/icona-vintage-wdt.jpeg)
