974 models
Holder for Tupperware lids (for kitchen organisation). Big and small versions. Should fit most kinds of lids, but obviously YMMV. Can be printed without any supports if your printer can handle a little bridging (I printed the ones in the…
Model size: 180x400 mm Wood used: White Pine, White Maple Stain used: Golden Pecan CNC machine used: DIY CNC Router CNC Process: For the Adaptive-Clearing Job, I used a (SPE tools ¼in up-down cut bit: Amazon link ). At 500-1500mm/min…
Tupperware lid holder for 12 lids.
I just split all letters up to use as Modifiers in Prusa Slicer 2.4.0 Enjoy. :)
remodeled teeth inspired by medical scans and moldings made my dentists - Upper and lower part fit into each other like real teeth but each can stand on their own. Size should be accurate to that of an adult. If u import the file into…
this is an upgrade of ''dummy13FANBOY'' version including a revised version of the frame and new upper and lower armor parts to fit an extra set of arms. I added flat spot on the second set of joint on the frame for easier printing and…
V0 Upper-Rear Bowden Inlet (URBI) A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with an optional filament sensor. There are 6 Variants: URBI - The basic, just a hole to pass the bowden tube through. URBI-PC4 - with a…
Simple uppercase letters to use in your own designs, or print as they are. I've just included the step file to make it easy for you to import into your CAD package
Replacement for Z Belt Clip Upper. It turns the z belt end pointing up. [a]_z_belt_clip_upper-Rama.3mf for Rala's Front_Idlers mod https://github.com/Ramalama2/Voron-2-Mods/tree/main/Front_Idlers
This cover prevents dust from settling in the Z-axis bearings of MK4 and MK4S printers. ... and the printer looks beter :-). The bottom cover is here Prusa MK4/MK4S cover z-axes . You can also check out other improvements to Prusa…
Support de bobine pour Qidi Q1 Pro. Plus solide que l'origine, et surtout placé au dessus de la machine, donc libère de la place. Version sans démontage de la base sur l'arrière de la machine. Sans vissage ni collage. Prévoir supports sur…
You will need : 6 screws M3x15mm Double-sided tape or Glue PTFE Tube 9cm
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
Just a simple Alphabet. Download and enjoy.
A set of digital dentures Upper and Lower models. Please note, custom made dental devices are patient specific and these will not be suitable for anyone else except the person they were made for. These are for demonstration purposes only…
This model should only be needed if you (like me) have re-routed the bowden tubes and no longer have anything to support the orange wire. I used an additional bowden tube inside the chain to support it. It is held in one end in the pocket…
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate Post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
Three vertical structures for organizing tupperware lids (IKEA) in kitchen drawers. There is one for round tupperwares, one for rectangle ones, and one for the small square lids. The ikea tupperware lids stack onto each other, and the…
I created a version 2 that is solid instead of hollow. If you rotate the model so the teeth are straight up, the slicer will have no errors. Additionally no supports or brims are needed to successfully print.
My wife wanted to be able to store multiple lids between dividers so I increased the space between dividers, increased overall length, and added some octagons in the dividers to reduce filament usage. Total length of print is just over…
First layer at 0.20 Print rest at 0.15
This model is compatible with the lego system.
Needed a Tupperware (Snapware) Lid Holder with a low base to fit in our cabinets. Cuts down a bit on material and time to print too. Can place double sided tape or rubber feet under the plastic feet to help stop it from sliding on the…
Some one broke the glass so I made the fix.
Since neither TPU nor PP will pass through the original PTFE tube, I am attaching a tried and tested solution here.
3D scan of Upper Arm Bone Scan - Humerus (Right) Thanks to the Institute of Anatomy First Faculty of Medicine Charles University for the possibility to scan this model. A collection of high-quality, anatomically accurate 3D scans of human…
Remixed version of the Tupperware lid holders by Lewis2e, removing the extra space at the bottom as my Tupperware doesn't require this space. MY PRINT SETTINGS: Printer Print Time Layer Height Nozzle Material Filament Infill Bambu Lab P1P…
Check out how to assemble the model here: 29/01/2024 - V2 Now Available! This is an outdated version that I have left up for posterity, the newer version can be found here:…
EDIT 30-01-2023: Added a cover with bigger mesh holes This mesh cover fits in the slots when you use the V400 upper plater risers found here: https://www.printables.com/model/325471-flsun-v400-upper-plate-risers Just press in the cover…
Hi, my wife has a butter dish from Tupperware that is very old and can not be found any more for sale. I've tried new ones that are available but the butter gets pinched and always seems to end up on the outside of the lid and dish. I…
How to Assemble the prop can be found here: https://go.screenpal.com/watch/cOVvfCn3wXB [30/1/2026, after youtube took down the original video, managed to get ScreenPal to work, let me know if there are any issues] Dimension 448mm x 52mm x…
An alphabet set for teaching letter recognition to children. Original design at the request of a local preschool teacher to match the letter styles the kids were expected to know for Kindergarten admission. Published here with approval…
How to print; 0.2 layer height Gyroid infill at 15% 2 walls Pegs facing up About: I liked the original's simplicity; But I wanted the freedom of anyone being able to make it as extended as their personal needs required . Everyone's…
This is not a weapon, nor a functional part for any weapon. I designed this to aid in storage of my extra uppers by functioning as both a dust cover and a solid block to keep the bolt carrier group from falling out. I've seen commercial…
Thought it might be good to have perforated upper plate risers for the V400 for better ventilation. I wrote a little OpenSCAD file to create lines of cylinders as hole punches, and used Microsoft's free 3D Builder to edit the original STL…
This is a remix of this design: https://www.printables.com/model/58718-spice-rack-pullout Thanks to the original creator. This spice rack was what I was looking for, but I needed to mount it from the top, so i modified it on fusion360 and…
I constantly needed these for various projects and I was sick of having to model them everytime I needed them. I guess more people are in my spot so, enjoy. If you want to thank, just cite me as the original author in your work - my only…
Consists of two pieces to fit print volume (Left / Right) Features: 21x holes for screwdrivers 1x hole for scissors 6x hooks on the side (eg for tape measure, utility knife) Has a stepped design to facilitate easy viewing and grabbing.…
N’hésitez pas à partager vos fabrications. Alphabet Uppercase : Vous pouvez y tracer l'Alphabet Harry Potter en Majuscules, le Vif d'Or, les lunettes et la cicatrice et Harry Potter, la Baguette de Sureau, des traces de pas de la Carte du…
Now we have more Barbatos armors, wait for more. Barbatos D-13 will be real. D-13 = Dummy 13
Individual side mounted pockets for rubbermaid & ziploc lids. The depth of each model will vary because I sized them for my need. Screw size: #6 ¾ length Printed with organic support top/bottom/walls = 3/3/3 10% gyroid infill Those…
This is my take on the AR-57 for airsoft. The Echo 1 version is hard to find in my area and I really wanted to get one, so I decided to make one for my ICS. This will work with base ICS lower Receivers along with the CXP Receiver. The…
This is my interpretation of the typical German Klappdeckelwagen K 06 “Wuppertal” or ”Sachsen" in Gauge 1 (1:32). This is the simplest version, without brakes. A version with brakes and a “brakemen's shelter” will probably follow soon.…
Every time I build a new AR, I typically paint the receiver set. I have always just used blue painter's tape. But I decided to make it a bit easier. I made some 3D printed masking inserts. I even added holes on the ends to hang them from…
After finalizing the simplest version, without brakes ( https://www.printables.com/model/423881-deutsche-reichsbahn-deutsche-bundesbahn-k06-klappd ), it took little effort to create this version with a “brakemen's shelter”. All items that…
This part of the car is no longer available in the market as it is an old model. So i decided to design it from scratch only the upper part without the open-close knob. On one side, where it had the 3 metal clips, I converted it so that…
The part works for now but I have no long-term experience with it yet. Part in action: https://www.youtube.com/shorts/ZeuzpYQkdoY Expected upcoming issues: PLA might warp in car interior the two thin “clips” that get caught by the holding…
Sako style upper for AR-15, fits Cyma CM.097 lower. The one that is about/is introduced to service in Finnish and Swedish armies. All the parts are compatible with CM.097 upper. Use AEG barrel nuts with it. Versions: “Swedish” is one…
Can be used with both the Male and Female Carbon 13 Models.
🔥 The most complete set of Digits & Letters (lowercase and uppercase) with operators, with or without square bases for kids to learn alphabet and spelling. There are also boards for the letters and digits. There are stl files with all…
The hot end wires should be routed from above to avoid installation interference issues. And the fixing method of the screw has been optimized. More sturdy installation, no squeezing of plastic parts. 2025/2/20 update: Replace HEAT SET…
This is a 3D printable model of a Tupperware bottle, based on a scan from a real bottle. It is available in two sizes: regular and small. The small version has a ring loop so you can use it as a keychain.
Summary The ST-AR15 Upper & Lowwer for CYMA Gel-Blaster Attention: !!! RISK IN YOURS !!! !!! 注意你的風險 !!! Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport. As our workshop has ceased…
-= Русский =- Кастомная верхняя ствольная накладка на Автомат Калашникова (ак, ак47, ак74, акм и остальные схожие модели) -= English =- Custom upper barrel pad for the Kalashnikov assault rifle (AK, AK47, AK74, AKM and other similar…
The rear spool holder of the bambulab P1P is very uncomfortable. Once the printer is mounted on a wall or placed in a rack, it is difficult to install or remove the filament spool. It is also difficult to ascertain the amount of filament…
Update 2024-10-24: Due to many requests there are now upper receivers with a Picatinny rail (STANAG 4694) available. I did not print them myself. Please post a make or at least provide some feedback because you wanted this ;)…
This is a tablet mount for the Kove 450 Rally (Non pro version) that can be 3D printed. I am mounting a Samsung Tab A7 Lite in a rugged case with it in the lower position or an AMPS bolt pattern RAM Ball with a Garmin GPS or a Motorcycle…
P90 upper receiver. Uses all original parts and works like the factory receiver. Main difference is plastic vs metal weight. I printed it in PLA and works just fine. Survived 3 games already and there are no signs of degradation. If you…
Super sexy cover for your V400
File from GrabCad converted to STL and cleaned up: https://grabcad.com/library/aap01-upper-assembly-1 AAP01 upper parts: - Upper - Threaded External Barrel with protection cap - Rear and Front sight AAP01 bolt and nozzle parts: - BlowBack…
I used tinkercad https://www.tinkercad.com/things/jBSvvRhF06K-ender-upper-gantry-cable-guide-with-cable-spline to add a cable spine to the Upper Gantry Cable Guide v3 when combined with the Ender 3 V3 SE Spine cable Clamp to Spine…
I modified the original version to provide some more support as i converted a CR10 V3 and wanted the extra support for the extended belt runs.
Mirrored original to get right side. Print at angle with supports. These hold up very well.
A simple holder for tupperware lids. The floor is curved to keep the lids in the center. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Notes: Printed in PETG How I Designed This The holes in the sides serve mostly…
The original had walls around the charging handle recess were only 2 thick. This remix reinforces that section for improved rigidity. Print orientation threads up or down.75 to 100% infill. .2 layer height with support.
Replacement upper cover for the DJI Avata's GPS module. Requirements: 0.25mm nozzle required Very small features that interface with clips that will not print with standard nozzle. Soldering iron or similar Clear piece for LED uses…
I present to you an Upper type Black Mamba for AAP-01. It is equipped with an M3 screw slot for the TDC, a removable lower Picatinny rail, and a 14CCW thread. Type A : Designed for use with the original front and rear sights, original…
This 3D printable keychain design brings back the beloved Tupperware Wonder Bowl in a miniature keychain form. The design is accurate and detailed, featuring the bowl's signature shape and lid. Print it in your favourite colour or…
A to Z 3D Model. I have attached a Combined Letters file. Select all and CTRL-click the ones you need, then delete the rest.
The Foam Comb (Fomb) is a simple printable tool for picking up nearly any dart type no matter their orientation! No need to aim, simply stab the ground with the Fomb to pick up darts and use the bucket fork to offload! The only…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
Gridfinity baseplate to hang to a Kupper (Küpper/Kuepper) pegboard (UE/EU/DE pegboard). Printed in PLA, it needs brim or adhesion disks under the pins (already present in the .3mf file). If you like it or you're having problems with it,…
Cimple caliper holder for pegboard from kuppper. Remixed, add pegs and renove uneccesary features for easy na fast print.
Upper fan bracket that hides Extruder Wires. Uses original hardware, thread rear screw all the way in before install, this prevents pinching wires. Use ball end hex wrench. Prints perfect. Fits great. V2 is more refined.
Part can be printed vertically for best look and without supports. For best strength it should be printed horizontally.
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
My wife was looking for a lid holder for all her lids. i couldn't find one here so i decided to model my own. I iterated it 4 times so far. the Holey version is the latest, it prints the fastest, and uses the least filament. tinker links…
Support Free 0.15 to 0.3 layer height 5% to 10 % infill Negative horizontal expansion -0.03
** This part is a snug fit to the side rail of Darren 3D Print ACE Overhead Mount (Original and v2) ONLY ** Just print it and it will fit nice and snug on the left rail on the top mount. I felt that cutting the Bowden tubes 14" was the…
(tr)uSDX wire winder case upper and lower panels
Make sure to print it in the labeled orientation, arrows up. Supports everywhere except the antistuds/backside To replicate the Seatron marbled ramp piece, you can color it in the slicer and then print it with either a Toolchanger or MMU…
Overview This is the double shear variant of the SV08 Gantry v2 . The only parts that differ are the upper AB motor mounts . 👉 If you already have the standard gantry v2 installed, you only need to print and replace these parts. 👉 The…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
Creality K2 DXC extruder upper mount with ptfe
If you print in PLA probably you want to take off a sprinter upper cover. I have designed simple rails to put that cover into. In my opinion it looks well and is quite usefull. Goog luck :-)
A set of stock length upper suspension links for the AX24. I wanted a set of color upper suspension links to match the Orange body of the AX24 itself. Printed in Prusa Orange PETG
The original lid is broken, but the shaker is still fine? Print yourself a new lid. I recommend using TPU, I printed this lid with Bambu TPU for AMS with a shore hardness of 68D and it works fine: noozle 0.6mm 0,18 mm layer 3 wall loops…
Less material overall, less space between dividers, larger cutout at the bottom. Current version fits 4 lids. I plan to refine more to better fit Glasslock branded lids and add the larger version. I printed with a 0.6mm nozzle.
a small mod that took way to long to design haha... but it will take a way 2 tail supports. but I don't Necessarily think material and time, so it's up to you. more can be found here…
Made the slots wider to hold lids sideways and to accommodate bigger lids. Added holes to screw down to drawer
Does the door on your shiny new Creality K1 rattle like crazy? Does it also crash into the top of your screen when you open and close it? Here's the ridiculously easy fix! Print this little shim with a nice big brim so it sticks to your…
This is an CM028 (ak47 airsoft replica) ris assembly for people that doesn't want to drill holes in their handguard
Customizable OpenSCAD version of the Honeycomb Storage Wall that allows custom grid sizes and the ability to add walls. You may need to play with the rows/columns to get the correct amount since the angled top wall will cut off part of…
Pencil box holder for Honeycomb storage wall second version
Upper and Lower Teeth morphology study models. Printed in sections for easy reference and handling. Can be rescaled to your liking.
This model is compatible with the lego system.
Updated design to fit a standard skateboard bearing (608). I figure this size of bearing is common enough that most people might have one setting around. Print Settings Supports: Yes Resolution: 0.24 Infill: 20% Category: 3D Printer Parts
this could be a option to make a upgrade on your MK-I for a more cleaner look. do keep in mind that the rail pattern is not alined. since the rail of the MK-II is different from the MK-I if you don't like that then you could modify it a…
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
this are the MKII uppers with the top rail already mounted on there this the low rail version so it’s one piece and no need to look for screw’s. but you do need to use the shrouds like the 227, 300 with the Low rail. for the stock shroud…
