71 models
I made this remix of the design made by HD_Creator ( https://www.prusaprinters.org/prints/42971-t-nut-for-pursa-mini-extrusions-groove-8-type-b-m4/comments ) because it feels safer to screw against a metal nut instead of the plastic. Also…
Dustcover for the winwing URSA MINOR 32 Throttle Metal, 32 PAC Metal and 32 AGP Metal. Printed in TPU 95A to avoid scratches
resized sanding block to fit on a Prusa Mini
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Cute Teddiursa-inspired keycap design. Cherry MX…
Do algorithms weep for having lost a sheep count? The teardrop speaks to the sentimental programmer who remembers growing up with a Commodore. This pattern is produced by the 10 PRINT algorithm, a one-line program originally written in…
Simple and easy to print control cover and knobs to further color co-ordinate your Prusacaster guitar. Updated Control Plate with improved mounting screw locations - 148.5mm distance between the mounting holds Added Flush Fit Knobs that…
This is a deck box for yu gi oh card. The original theme is for URSARTIC card. Can take about 50 to 60 cards with sleeve
This stand will fit for Lost Vape Nano Pro Ursa. Keep your vape pen from falling over when you set it down.
V2 of my Ursa Wren... twas a long time since i did the original so i though it best to update it. Changes to dome and the ears , cheeks and small fixes. Also added braces to the V to keep the shape. (these are 0.5mm thick and can be cut…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Remixed the mounting hardware from the Thrustmaster model and adapted it for the WinWing Ursa Minor Airliner stick Made a little shorter in the Y axis to fit on my 230x230 print bed. Filled the original holes that aligned for the…
Did the audio dial on your URSA break as well? Fear no more! These are multiple variants of replacement audio dials for any Blackmagic Design URSA camera. They all have the same fit and should pressure-fit perfectly on your camera. The…
Ursa Maior & Ursa Minor constellations Keychain. If you print it in one color, it looks good. If you print it in two colors and use a natural or translucent filament as a base, when you illuminate it or place it in front of a light…
Do you buy Prusament filament? Do you buy samples? Do you have nowhere to put your samples? Then rejoice the solution is here Prusament comes on a 3 part spool with 2 sides and a cardboard central tube See more here…
Drive like a maniac? No worries! HoldUrSacks will hold your sacks! 15,5mm hole for headrest shaft/leg/pole ... smh
Halterung für Teradek Blot 6 an Blackmagic URSA mini 4.6k Kamera Mounting bracket for Teradek Bolt 6 on Blackmagic URSA Mini 4.6K camera
Fiber optic converter mount for Blackmagic URSA camera. Incl. gear ring
Ursa Nano vape airflow cover
A friend needed some belt greeblies for her Ursa Wren cosplay. I knocked these out and figured someone else could use them as well. Enjoy!
Replacement for the audio dials of the Blackmagic Design URSA Mini Pro 4.6K (G2) and 12K cameras, which tend to break quiet easily. I resized my preferred design of the original models, so it fits perfectly. The original models were…
Create your own, winwing ursa minor desk mount. Hardware required (for 1 stick holder): 4pcs: 20x20 aluminium profile corner brackets 4pcs: M5x10mm screws 8pcs: M5x8mm screws 5pcs: M5x12mm screws (2 for winwing, 3 for toggle clamp) 12pcs:…
Top-plug-edge.stl, but added a 4.0mm diameter hole, centered, to route a bowden tube from above printer to inside it. Print it with PTFE or similar to withstand wear\loading\temperatures. Is a very simple print, but enabled me to…
This piece is specifically designed for the URSA Mini Pro 12K and Samsung T7 series' cables. An M2 10mm bolt is used to fix the part to the camera, the USB C cable is pressure-fit. To make things extra secure, you can epoxy the cable to…
About The manual for the MMU2 upgrade requires you to cut the original Mk3 door on Part 3 Step 38 (version 1.0 manual) as seen in the picture below. Instead of cutting the original I decided to modify the original einsy door for the mk3…
2x rods 150mm 8mm aluminium 1x rods 65mm 8mm aluminium Epoxy glue ** For model 2023 to thomman.de : https://www.printables.com/fr/model/426574-metal-rods-middle-body-pursacaster-2023-block_core
Ursa Nano Vape pen Cap. To keep the dirt of your pocket out of your mouth. Friction fit, printed in TPU
I modded the great design by DaGov to accomodate for bowden fittings I had laying around (from my Voron-Projects) as well as improving printability. The only part I changed is the back extruder part. The remaining parts can be used from…
PURSA is a 3D printed carry-on-space-modern-toolbox-purse-bag, for your daily use. You can easily lock in buckles with overshoulder strap from regular laptop bag or any other belt or strap with clasps and wear it with you, wherever you…
So I have two of these Wolfcraft clamps and a while ago one had a broken spring. It didn't work anymore which is why I came up with this repair kit. The kit consists of the two printed parts as well as three parts you need from the…
Auf der Suche nach einem Gehäuse für meinen MK4s bin ich nicht so richtig fündig geworden, das Original Enclosure finde ich super, hat jedoch auch seinen Preis. Die bisherige Ikea Lack Lösung war auch nicht mehr meine erste Wahl. Also…
Pokémon Ursaring multipartes, es ya el segundo pokemon que logro dividir en partes según su color, y creo que voy mejorando, aunque aun así, falta mucha practica para que logre salir perfecto, de todos modos lo comparto para que al igual…
Magnetic base that replaces the small white one that comes with the Tapo C110 wifi camera. Sits on the top rails of the Prusa XL. Uses 12x2mm magnets. I measured mine to be closer to 1.75mm thick, so that was how deep I made the pockets.…
This is a Hotend Fan Vent, I made this fan vent for Pursa Bear, should also work on MK3S. The screw clamps is extremely tight, so installing this part is not very easy. Thickness of this part is 2.5 mm, you can easily change the thickness…
Bulbasaursax hope you enjoy :-) Print in 2 mm Hight :-) follow and like for more. Makerworld: Turbo9670
As an avid flight simmer with a physical disability, which greatly affects my finger and hand dexterity, it was difficult for me to advance and reduce the thrust levers in unison. This simple print clips over the thrust levers so that…
Infill-15% requires tree supports scale to 170% here is how you should print it
block_core1.1 for version 2023 harley_benton_eguitar_kit_tstyle (www.thomann.de)
Case for the Ursa Nano 2 model with skulls (skull eyes glow)
I only had a Raspberry Pi4 laying around and I wanted to add Octo Print to my Core One. Remixed the references cases together and got this. Printed it and it fit great. Use 3x M3x14 screws for holding the case together, and you can reuse…
Coin designed for Pokemon Go community day classic. Coin reflects selected Pokemon for community day November 12th. Front shows Teddiursa and back shows the Teddiursa evolution. Glue coin halves together after printing. Paint if desired.…
a dustover for the WINWING / WINCTRL URSA MINOR THROTTLE METAL, that utilizes the "screw(holes)" on the engine panel. Also easy to remove Printed in: 60% infill, grid, fast (0.3mm) Disclaimer: It maybe wont work with your printer, since…
Jabra Evolo 30 Mono Reparatursatz für Links oder Rechts
A quick release plate to easily remove your joystick from your cockpit, adapted to the Winwing Ursa Minor. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
Ankylosaur from late Cretaceous Mongolia.
My son broke the head of the Eierschalensollbruchstellenverursacher and because of that, the metal ball used to crack the egg fell of. I am not very experienced with 3D modeling, so please be patient with me. This is just quick and dirty…
Was really fun to create. Let each bee live in its own star! Nice side effect: learn the constellation ;) Happy printing!
Heat bed strain relief, designed to lift the wires up by 90° so that they do not contact the rear of the enclosure. Print in petg, abs, asa, Nylon, 100% infill You will need M3 misc hardware to bolt them together. [Updated 1-25-2025]…
I designed and print the menu button because I lost it.
Made with sdf2stl.saej.in full SDF code: float sdGoursat(vec3 position, float radius) // 0 <= radius < .75 { float p4 = dot(position * position, position * position); float p2 = dot(position, position); // f(x,y,z) = x^4 + y^4 + z^4 - x^2…
It would be amazing for the little ones if they are in love with the little mermaid
These little dials are exposed and often break of fall. I found out that my model was an improvement as it never failed. It is also cool to add a pimp of color to customize the camera.
Replacement part of the silicon piece that goes on the vape from which it can be hung. To be printed in TPU. I used FilaFlex 60A. Print Settings Printer Brand: Other Printer: ZeroG Mercury One Rafts: No Supports: No Resolution: 0.2…
If you sell, own or work on Wolff brand e-bike, then you have probably seen this knob for the battery release break. The knob just crumbles over time for seemingly no reason. I work for a dealer and own a Vela, when i went to remove the…
Peg board with the major stars that make up Ursa Major, along with the connectors to connect-the-dots into the famous constellation's shape. You'll need to print 18 connectors, specifically: 5 - 8mm connectors4 - 10mm connectors 3 - 12mm…
linkes und rechtes Reparaturteil für gebrochene Push-Lock Schlösser
Wenn der Schließzylinder herausziehbar ist, weil sich der innere Clipp verabschiedet hat... Die Hülse muss nur gedruckt werden, wenn sie beschädigt wurde. Drucken aus hochfesten und benzinfesten Materialien. Mein Versuch aus E-Sun PLA-ST…
Simple and easy to print control cover and knobs to further color co-ordinate your Prusacaster guitar. Updated Control Plate with improved mounting screw locations - 148.5mm distance between the mounting holds Added Flush Fit Knobs that…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Winwing Ursa Minor. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
If you sell, own or work on Wolff brand e-bike, then you have probably seen this knob for the battery release break. The knob just crumbles over time for seemingly no reason. I work for a dealer and own a Vela, when i went to remove the…
Mandalorian Armor inspired by the set worn by Ursa Wren in Star Wars Rebels. My armor is a nice bridge between the animated design and what has been seen from the female sets featured in live action. The armor was designed around a…
Always have loved this helmet design and decided to use my skills to mix it up a bit a bring it to the standard set by the live action Mando suits while still staying true to Ursa. You may notice from the side views and front that the…
This model is a wearable Ursa Wren Armor, helmet, jetpack, blaster. SIZE At 100% scale armor, the model should fit a 170 cm tall female You can scale the model according to your needs. At 100% scale, the blaster dimensions are: Width…
Hello everyone, its been a minute. TLDR, college and life Anyways, new coin! I made two version, one where its just a straight trace of his symbol from Limbus, and my interpretation of what a version would look like if his symbol was…
Calling all Pokémon GO Community Day organizers and passionate trainers! Elevate your Teddiursa Community Day meetup with these captivating 3D-printable Pokémon-inspired coin models. Resembling the iconic coins used in Pokémon TCG…
If YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Teddiursa, Tabletop DnD miniature 20 mm small base which can be used for DnD and other Tabletops.
Mandalorian Armor inspired by the set worn by Ursa Wren in Star Wars Rebels. My armor is a nice bridge between the animated design and what has been seen from the female sets featured in live action. The armor was designed around a…
![Metal rods middle body Pursacaster [2023 block_core1.1]](https://media.printables.com/media/prints/426574/images/3530632_300e44bf-e82b-4e4f-b16f-5e3dde7137eb/capture-decran-2023-03-18-124033.png)
