Counting matching models…
Center cap for ALUTEC wheels. The originals are 63.8mm. This version is 64mm for a tighter fit. Choose from blank version to be customized or a provided Mercedes star Fit very tight but are easily removable due to small recess to enter…
Die Griffabdeckung passt auf Euroboxen von Alutec der Größe 60x40. Sie kann von innen in die Grifflöcher geclippt werden und hält durch kleine Überstände von selbst. Die Abdeckung hat eine kleine Griffleiste am oberen Ende, sodass man die…
This is cap for alloy wheels by ALUTEC. Center diameter is 63.8mm
These are pretty quick prints that get combined with a 408 bearing to turn a filament spool half into a lazy susan of turn table. The models let you turn a 3DSolutech 3 part spool into a nice painting turntable. Optional cover for the top…
This is an updated design for 3D Solutech Masterspool filament. 3D Solutech is a US based filament manufacturer that is starting to provide Masterspool filaments. This design is specific to 3D Solutech Masterspool filament with a…
this Object is a Bracket for a Feiyutech Gimbal because the GoPro 10 doesn't fit in the Original Bracket
This is based on the Karma ring but with some important changes: Flipped the nut mount point - makes access much better when wearing chest plate Thicker mounts. 2 Extra grip pads. Longer mounting arm. Vertical support ring. Cutout to…
Einlauftrichter für Rolltor von Alutech Einlauftrichter_R - Standart für rechts muss noch gespiegelt werden Einlauftrichter_2x - Bereits beide Richtungen auf dem Druckbett
Idea As everyone i try to keep my Filaments as dry as possible for clean looking prints. Until today i used vacuum bags. One for each filament i have. This is always timeconsuming and anoying to pack or unpack the spool of filament bevore…
The Cane Holder Clip is a lightweight assistive aid that can be hung from a bag so that a cane can be easily held in place with the users bag whenever it is not needed. This device was developed for a user with a cane that has a roller…
I needed some 2x3 and 2x4 inserts for my boxes to store larger electronic parts. I found the model by MikeHotelEcho, and remixed it to suit my needs. Uploaded it here if anyone else needs the same sizes as well.
Single unit container for Alutec organization boxes (for screws, connectors etc). See www.alutec.net for the container system this belongs to. Category: Containers
This is remix of my original #Masterspool to integrate a 608 bearing right into the hub. Original Design w/o 608 bearing I.D.: https://www.thingiverse.com/thing:3187986 3D Solutech is a US based filament manufacturer that is starting to…
Replacement foot for a UtechSmart Saturn keyboard . I recommend printing this largest side down with max perimeters for strength. I used supports underneath the pegs, organic supports with Prusa worked really well.
I've created Fallout themed adapter for GoPro Hero 1/2/3/4 for feiyutech vimble 2 gimbal. It's easy to print, no supports are required.
Yet another 3D Solutech spool adapter, this time optimized for the ubiquitous 608 bearing! Should print fine without support, but if you have droopy filament, might want to enable it for the 90 degree overhang on the inner lip. Category:…
Pls give a like if it fit your expectation :) Adaptation for the cheap Feiyutech G5 gimbal to be able to make the best with the GoPro 11 mini, Cinematic render ++ Recycle the old electronic buy second hand and get a cinematic render on…
This clamp allows you to attach your Feiyutech G6 gimbal to a GoPro chest mount via J GoPro mount. Makes for some awesome mountain bike footage. Requires M3 bolt and nut Check out the footage to see how smooth it is…
I love my U-bolt Pro smart lock, but man I am super sick of the fingerprint sensor when it rains - it gets moist and then beeps all night because it registers the rain as a finger. I've just designed & printed this after another…
Snap-in Cable Holder 45x45 Snap-in cable holder for Alutec KK 45x45 aluminum profile with 8 mm slot. Designed for this profile: https://katalog.aluteckk.cz/produkt/profil-45x45-ekonomicky-104545e/ The holder is inserted into the slot and…
I've been using 3D Solutech Printer Filament for over a year now. It has become my main go to filament. There is one problem I have. Packaged with each spool is a round graphic sticker. I've been beside myself trying to come up with a use…
I have both models of the Feiyu Pocket 2. While I'm using them I often have to put them down, put in a pocket, etc. I usually have it mounted to a handle with a light and a Zoom mic, and putting it in the case is a pain. So - simple…
!! Do not put magnets very close to the gimbal. Gyroscope in the gimbal reacts to the magnetic field !! This is magnetic chest mount for FeiyuTech WG2X gimbal. It has minimalistic clean look with straps hidden under clothing, good…
Friction fit Centech Quick Click adapter for those using a Cutech jointer or planer. Gives a better, faster, and less clog prone connection to whatever vacuum you are using in the shop. May also work(unconfirmed) with similar models…
Kudos to Wendigo013 for the original design! Why This little piece of plastic will lock your FeiYutech Vimble 2 securely in place for transport without having to carry the nice but bulky case. It's functionally identical to Wendigo's…
ALUTEC aluminium profile 45x18 cover
This is a case/cover for the Yamutec USB-REL4-8A Relais Module . This version (1.6) is a slight modification of the previous Model with the following changes: added holes for LEDs added circular inset at power jumper, so it's easier to…
608 Bearing spindle for 3D Solutech Masterspool. Masterspool can be found here: https://www.thingiverse.com/thing:3187986 You will need to press-fit a 608 roller blade/skate bearing into each piece after printed. Then insert though the…
These end plates lock into Solutech filament spools. They replace the end plates included in the repwinder kit. One side includes a collar that goes over the barrel of the repwinder to make up for the larger hole diameter of the solutech…
Love the minimalist designs but the original design and customizer weren't quite up to fitting my 3D Solutech masterspools. Fortunately the original designer uploaded the SCAD file and I was able to customize it to fit. Placing it here to…
This is a case/cover for the Yamutec USB-REL4-8A Relais Module . This version (1.5) is an improvement based on my first iteration with improved tolerances. The cover fits accurately around the USB port with about mm of gap on both axis…
print in the desired position (on the chamfered surfaces) without supports. v2: stronger version
Project: CuteCat_07.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 132x175mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…
Project: CuteCat.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113x201mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.6mm and the Actual…
This model requires a M3 heat set threaded insert be pressed into the top, and a M3 machine screw be threaded through the botton, into the top to create a quill stem similar to those found in certain types of bicycle handlebar stem. I…
do otvorů D5.8 zašroubujte 2ks závitivých vložek M4 pro zajištění trubky do šestihranného zahloubení matici M8 k připevnění na profil Materiál PA, ASA, PETG.. wall lalyers 3
FeiyuTech SCORP 2 Small Plate Replacement Pin Lock - m2 screw needed
hi i made this for kawaii or cutecore people
Griffabeckung für Alutec Euroboxen, mit Griffrand, selbsthaltend. REMIX Für die 60x40cm Boxen in Höhen 12cm, 22cm, 32cm. Die Griffabdeckung von @amrsuu wurde mit der Grösser der passenden Box beschriftet. Per Split und Auschneiden wurden…
Side handle cover for Alutec storage boxes (container dimension 400 x 300 x 235mm, might fit on other sizes also) to protect against dust, moisture and vermin, clicked in from the inside. If desired, text can be printed on the outside of…
Hierbei handelt es sich um Abdeckkappen für Autec Alufelgen. Die Kappe passt für ein Loch mit 54,7mm Ich habe in PETG gedruckt da es höhere Temperaturen aushält. __ These are cover caps for Autec aluminum rims. The cap fits a 54.7mm hole.…
Hierbei handelt es sich um Abdeckkappen für Autec Alufelgen. Die Kappe passt für ein Loch mit 54,7mm Ich habe in PETG gedruckt da es höhere Temperaturen aushält. __ These are cover caps for Autec aluminum rims. The cap fits a 54.7mm hole.…
Just a adjustment to fit the 3DSolutech masterspool refills. Thanks for the Fusion 360 file. See original for the pretty simple instructions. Category: 3D Printer Accessories
Extra Parts Alutec Storage Box (370 x 270 x 225, Item no.: 75040 ) Aluminium Tube (8mm x 357mm) Silicone (or other glue to seal the gaps) Window Sealing Band Zip ties (optional, used as back hinges) Plexiglas (295 x 176mm, optional, used…
3D Solutech makes some kick-ass filament but their spools aren't well suited to 8mm threaded rod. Here's a handy insert made specifically for their spools. Lots of holes to help keep the filament required to a minimum, and should print…
See the pictures for more details and exact dimensions.
This is improved design, including a pocket for glue to remain in the joint instead of being squeezed out and compromizing the seal. The caps cover the Alutech rail joints as well as the roof strap.
I occasionally break the plastic clamps that came with the light while working construction. Printing new ones turned out to be the easiest solution. If you own one of these lights, print with supports between the top and bottom. I used…
Just a adjustment to fit the 3DSolutech masterspool refills. Thanks for the Fusion 360 file. See original for the pretty simple instructions. Category: 3D Printer Accessories
This adapter allows you to reuse the 3D Solutech spool thing for eSun refills. The dimensions are 75.19 mm inside diameter and 90 mm outside diameter. Category: 3D Printers
