Counting matching models…
This template is for marking the mounting holes for the 2025 type Ikea Utrusta (110°) and Blum Clip Top Inserta hinges. The small part of the template is for the cupboard side, the big part for the door side. All you need is a pencil and…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Juego de mesa “Neutrón” Neutrón es un juego de dos personas. Requiere un tablero de 5 x 5, y 5 fichas para cada jugador, llamadas Electrones, (generalmente blancas y negras). Además hay una ficha roja, el Neutrón, compartida por ambos…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Ring to fix nutribullet smoothie maker cup after all "teeths" breaks off. It slides over the bottom of the cup and glues.
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without support. The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without supports, The “Body” file…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without supports, The “Body” file…
Hanuman is a symbol of strength, loyalty, devotion and dedication. He was the son of Vayu, the god of the wind, and Anjana, a celestial nymph. In this comic inspired original concept, Hanuman is depicted carrying the his iconic mace, 'the…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without supports, The “Body” file…
who doesn't know it? you always have to dig around in the Chunky Flavour to find the spoon and end up with sticky fingers. That always bothered me. That's why I created this spoon holder so that the spoon is always within easy reach. The…
Low profile right angle cap for the Neutrik NC3MXX or NC3MXX-B. The thread screws into the plug about 1 turn, this seems to be working at least with the cable I have. It also holds the pins in place. Perfect for your audio mixer bag,…
I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant , and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to…
Neutrik NC3MXX cable mod. Turning a normal plug into a 90 ° angled low profile plug that you can print in your own color for match and marking. Features : - 4mm and 6mm cable support - Supports both male and female plugs, and plugs with…
A low profile cap the Neutrik XX-series XLR connectors, fits both male and female. 3mm right angle cable outlet (indexable every 90 degrees), builds 5mm on top of the connectors resulting in 24mm for a male and 29mm for a female.…
This is a remix that I did off of zx82net's Universal Parametric Project Box. I sized it and added the cutouts to fit 4 Neutrik D-Series connectors. Requires 4x M3 Screws, 6 to12mm long to close the lid. Uses M3 screws and M3 nuts to…
Pico remote slides onto the pedestal and clicks in to lock in place. The model also has holes on the bottom to allow for recessed rubber bumpers to give the pedestal some grip on the table surface. As pictured, stand was printed without…
This design was modeled it after a Jaeger-LeCoutre Gyrotourbillon, which they offer in several of their high-end watches. I tried to make the model an accurate (scaled up) version of the original mechanism, which is less that 10mm in…
Version 2 with interlocking hooks for no gap movement at all, prints without support. Available in two lengths (68 mm and 80 mm). =============================================================== I designed a printed variant of neutrik na…
Cover for XLR or other Neutrik D series holes in a front panel. This version is mounted from behind and does not protrude on standard rack panels. Designed in SolidWorks, source file provided. Instructions Printed on Bukobot 8 V2 Duo PLA…
This plug make it easy to build right-angle cables using Neutrik NC3-X connectors. There are two versions of the cap; this way you can have the cable exit toward the left or right based on your application. These work on male and female…
simpel for remixing your project to fit an neutrik ( or clone ) style connector
I recently bought myself a Nikon Z camera with the idea to adapt a lot of old and strange lenses. Since I didn't want to buy an adapter for each and every one of those (there isn't even one for some of them) I wanted to go with a printed…
In the 50's the Deutsche Bundesbahn started opperating the ETA150 battery powered railcars. https://nl.wikipedia.org/wiki/Baureihe_515 My goal is to my design 3D-print models of typical Dutch rolling stock. This German railcar does…
This cable support is designed to prevent damage to cables inside an audio rack by keeping them securely in place during transport and handling. By minimizing movement, it helps maintain signal integrity and extends the lifespan of your…
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough. To avoid spending too much money on a new mSATA SSD, I designed a 2,5" drive holder to be able to reuse an old SSD that I already had. How to install…
Adapter to mount a D-Type Socket safely in rack with strain relief. M3 heat set inserts for safe and easy mounting. For racks or just use it for your own adapter. Fits a PG9 cable gland
Voici l'accessoire “masque Utruz” du Scénario Lv3 "Le masque Utruz" dans l'univers de Laelith - Dungeons & Dragons RPG Vous faites jouer ce scénario à vos joueurs et vous souhaitez ajouter un peu d'immersion ? Imprimez l'accessoire…
A wall mount for the Lutron Caseta hub! Clips over the whole hub. There are four holes, but I'm only using two myself - it was mostly just more convenient to make 4 holes than 2. Category: Electronics
Very snug fit HDD bracket for Fujitsu Futro S920. Fixed with 2xM3 screws to the Futro. Vertical printed without any supports (as in the 3mf file) 2,5" HDD with 9,5mm height fits inside. HDD can be fixed with 2xM3 screws too.
This adapter allows you to add Utrusta push opener to your Platsa cabinet. It is secured using Besta push opener screws (spare part number 113286). Printed using Bambulab PLA Matte (with support).
Holder for More Nutrition brand syrups, for 5 and 3 pieces Enjoy it!
This is a compact storage case for the Unifi Travel Router (UTR) and included USB-C cable. There is also an integrated storage pocket inside the cable ring that can be used to store small items. The case is printed as two separate pieces…
Old style Neutrik blank panel, with a plain front - that was without Neutrik logo. Ideal for small size connector or cable gland on D size system hole, or custom build adapter with NA-Housing profile, or to cover unused holes. You can…
Panel based on https://www.thingiverse.com/thing:2055716, added holes for D-Mount Neutrik Style Connectors like XLR or Ethercon or USB
I love playing with the stands by LostPrinter but wanted some without the class icons. This stand features the game logo on both sides. Printing instructions from the original models obviously still apply.
I made a few changes to dancerdude's model to more accurately fit electrical boxes and the pico remote. Adjusted screw spacing to match standard box mount and strap mount distances. The original model was close, but not exactly right.…
You can't get inline Powercon sockets so the only option to extend one is a bulky and expensive coupler. This 3D printed shroud lets you convert a standard panel mount socket into an inline one. Inspired by Joyva on Thingiverse , (I made…
A 10" 1U rack panel for Neutrik D-Series plugs, which are commonly used for XLR and more. Screw holes for plugs sized for M3 screws. Rack screw holes sized to accommodate Rackstuds . Spacing between each accounts for the use of color…
I had some openings left over on a panel of the CNC controller casing, which is placed behind my milling machine. We don't want bits of metal flying in there! The “Tight” version of the files have a slightly tighter fit between the ring…
Löffel und Einsatz für Chunky Flavour von More Nutrition 90 g Dose Man findet viele Einsätze für die 150 g Dosen, aber nicht für die 90 g Dosen, die wir haben. Deshalb habe ich einen neuen Einsatz designt. Der Löffel ist ein Remix von…
UPDATE: V1.1 has improved pin shape for easier mounting. I used PETG for printing because some flexibility is needed to make the little arm snap into the Kensington lock hole. 3 perimeters worked well. If you try PLA, please let me know.…
I decided to adapt my Lutron Pico wall plate bracket into a desk stand. This uses the mounting slot on the back of the Pico remote, so it's easy to attach and remove. The body prints in one piece, and I've included supports which work…
Rocket Lab announced their new Neutron rocket system today. To celebrate, I whipped up a 1:250 scale, 161 mm (6.3 in) tall, low fidelity model based on the vehicle renders and specifications released in today's announcement. See the…
Um die Topfscharniere von Ikea an eigenen Projekten benutzen zu können, habe ich mir diese Schablonen zusammengestellt, um so einfach wie möglich zu markieren wo die Löscher hin müssen. Für meinen Fall (19mm Bretter und 3mm Tür Abstand…
This is a compact storage case for the Unifi Travel Router (UTR) and included USB-C cable. There is also an integrated storage pocket inside the cable ring that can be used to store small items. I designed the case with a snap-on cover…
Low profile right angle cap for Neutrik XLR 5mm cable This is a remix of hennedo's model to allow for a 5mm cable. I'm using a Neutrik NC4MXX-B Male 4-Pin XLR Cable Connector for a headphone cable and this remix cap fits perfectly for the…
I added some identifier plates to d series xls ports on a playback rack earlier this week and was frustrated by fiddling with the nuts to reattached everything to the rack mount. I added a simple wire pass through on one end so that this…
Quick modification of the Futro S740 19 inch mount by @d3n1zg for a 10 inch rack. Use two M2.5x6 flat head screws for fixing the Futro to the mount.
A simple tool to tighten up the boot / bushing of Neutrik XX series connectors.A simple tool to tighten up the boot / bushing of Neutrik XX series connectors.
EN Updated 27/03/2025: Modification of ‘CPF-BASIC’, ‘CPF-CG’, and ‘CPF-CD’ to add a foot for horizontal use. Addition of ‘CPF-Pied Storage box for 72 markers, pens, pencils, etc. Square slot, 1.5 cm square, with 6 rows of 12 slots. Parts…
M3 nuts holder for neutrik D form connectors New V2 lite version, less filament needed.
Based on the dimesion of Neutrik's Step file. shold fit snug if your printer is well calibrated. Added corner relief to the inner corner of the insert to help with the pressfit. Printed in PLA at 0.2mm layer height.
For labeling Neutrik XLR (XX-series) with text I use the clear code rings sold by Neutrik but they are quite loose so I created a balancing piece. I also created my own version of the color coding rings. There are lots of other models…
A Sturdy 1U Patch panel made for D-Type connectors from Neutrik for a 10 inch rack.
Pico remote slides onto the pedestal and clicks in to lock in place, 8mm rubber feet fit perfectly in recessed holes on bottom. Printed in PLA 0.1mm layer hight.
I was building an enclosure for my MK3s+ with the Ikea Platsa cabinet and glass doors. Unfortunately, the only 60x60 cm glass door I found was the Enköping one (two 60x30cm doors), and there are no hinges that fit Platsa and Enköping…
The Runner/Outrunner from Borderlands and Borderlands 2, modelled up in Fusion 360 using the games as a reference. The model is split into parts and optimised for 3D printing to help make things as simple as possible to print, whilst…
Description A 19-inch, 2-piece, modular rackmount for a Fujitsu Futro S740. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix and match the modules with other mounts. Take a look at his models here…
Adapter into which a Neutrik NE8FDX-Y6 or NE8FDX-Y6-B panel connector can be mounted and connected to a regular Ethernet Cat6A cable. I used a 50cm Cat6A patch cable and cut it in half to get two pigtails. You will need two M3 brass…
Simple bracket for hanging a FUJITSU FUTRO S940 thin client on the wall. Additionally, only 3x 4mm at least 50mm long countersunk screws and corresponding dowels are required. Ensure alignment on the print bed so that the upper hook can…
Remix for a 2020 profile, thanks to Theunicyclist for original model.
im a flywheeler from China,hope you love this remix. ！！！important！！！↓↓↓↓ you must use "Neutron High Rate of Fire Compact Solenoid" from OutOfDart：https://outofdarts.com/products/high-rate-of-fire-compact-solenoid?_pos=2&_sid=c7957b968&_ss=r
These are files to adapt the Neutron solenoid instead of the FTW solenoid. Included are modified side panels and mech covers and pusher. Included my adaptation of the new buffer tube stock to the solenoid gryphon which is the rear cap and…
This Neutrik receiver mount will fit the 2 and 4 pole Neutrik recievers. I use it as interconnects for speaker wire for the transducers on my rig. It uses 1 M8x16 bevel head bolts like these to mount to 40 series profile…
This is a brushless motor I designed to learn about electric motors. This is a 9 slot motor with 12 magnetic poles. The following link can be used to for wiring help. http://www.bavaria-direct.co.za/scheme/calculator/ I wired the motor in…
Custom Neutrik D-Norm color coding / signing plates. Liked this design much more than the original ones, because you can see much more color and have a place to put your sticker (max height 1cm) on to it. Category: Electronics
Just before Word War II the Dutch Railways build a very modern concrete signal post at the west entrance of Utrecht Central Station (Leidseveer). This remarkable concrete structure, designed by achitect van Ravensteyn, was never…
Another set of A1Mini feet, again outrigger style for more stability. Creds to the orig designers for their work. Grab some longer m3 screws A bit fiddly to install but they get there. Grab your balls and go! Have fun good luck.
Buggy Outrunner from pc game Borderlands. please donate me: https://www.paypal.com/cgi-bin/webscr?cmd=\_donations&business=W32N4JZYX4TNY¤cy\_code=USD&source=url i need to buy some gift(roses or romantic dinner) for my wife, for her…
Gedruckt mit PLA Schichthöhe 0.2mm Infill 20% Gyroid Mit Stützen gedruckt Man brauch ein Akku und das Anschlusselement für den Akku. Dies kann man dann in vielen Projekten umsetzen. Ich habe es genutzt zum Bau einer Musikbox mit Akku.
Prints with no supports, M3 Screws fits good, but you need a nut to Screw in, maybe I'll make a version to self tap into. New Version 2.0 adds Support for countersink Screws and m3 D-Norm Mounting Frame! It's about 2 g and takes about 20…
A case for the Ubiquiti Unifi travel router with space for the included USB-c cable. I have included the fusion file so others can easily add or subtract from the model.
UPDATE - 22 November 2020 Added a set of new caps for Aux Jack mods. There is a flat cap with Aux Jack. Additionally, there are caps with the 3/4" stub with just the jack, the jack + 2 circuit holes, and the jack + 4 circuit holes. There…
Network connector box for Original Prusa Enclosure using Neutrik A-Type or D-Type sockets - suitable for USB and RJ45 connectors (22mm or 24mm hole). The box houses two Neutrik connectors and has two mounting holes spaced 60mm apart so it…
The original model would require a lot of support, which would lead to worse surface quality. Using Prusa Slicer 2.6.0 (alpha 5), I split the base of the Neutral Dude from his body, and made them connectable via plugs. This way the only…
Just simple and boring copy of Utrusta drilling template. It's material-saving desing, two version. Remember that you need two of them: left and right, you can just mirror it by x-axis in PrusaSlicer.
The Electric Fence Outrigger V2 has been redesigned to streamline the printing and installation process, while using the same tried and tested design. The Electric Fence Outrigger V2 comes in two lengths; 160 mm and 110 mm. The Outrigger…
This is a reversible wand tip modification for the Hasbro Neutrona Wand. Simply press the printed part over the existing tip. The fit is very snug, so it shouldn't fly off during normal use. I've tested it on both the Spengler wand and…
This is a replacement for the Lutron Caseta Pico wallplate bracket. I was installing a bunch of remotes and, of course, came up one bracket short... so here's a replacement that has the same basic dimensions as the Lutron bracket. Unlike…
This is a model kit for Sutro radio tower in San Francisco. Finished model is ~30cm (12in) and can be printed on a Prusa MINI if you're careful. The kit requires some sanding and glue to fully assemble.
I originally made this for a bathroom sign, but this can be used to make all sorts of signs. Simply edit the openscad text file to customize: Sign dimensions, corner radii, border width Sign base thickness (this is the “background” part…
Brutringe für Inkubatoren. mit diesen Ringen werden die Eier von bereits geschlüpften Küken nicht mehr beschädigt.
i bought the Fujutsi futro S740 cheap as a home server for smart home stuff. due to it was used i got no stand with it. here are 2 options for that for every stand you need part A and part B i printed that in ABS on my Voron
Z boku je otvor na plochý magnet vykuchaný ze starého harddisku. Rozměry klíče (max): 26 x 3 x 72 mm Rozměry magnetu (max): 14 x 2 x 72 mm. Vytištěno jest z PETG (není podstatné) a jak je u mě zvykem, projektový soubor pro Fusion360 je…
Updated to keep the front bearing secure without having to epoxy it in. I designed this motor pod to mount a 6384 motor to a soft top surfboard. The 3 phase wires run internally and I use 12awg silicone wires. I use either ASA or PETG,…
Materiał: PLA, ABS, PET-G Podpory: Tak Uwaga: Zamontuj w pierwszej kolejności dyski twarde za pomocą śrub stożkowych M3-6mm. Dla dwóch tylnych śrub M3-10/12mm potrzeba delikatnie rozgiąć kratkę, można zastosować śruby M2,5 (bez rozginania)
Here's my third wheeled mecha model kit! The Outrider Tank is an elongated, speedy vehicle for ripping through all terrains to catch your enemies quickly and easily. The Outrider Tank has 11 parts that assemble to create 6 moving joints .…
Hangend ornament van de Utrechtse Dom toren. Ontworpen zodat hij in het LOMVIKEN 13x18 fotolijstje past van de Ikea . Perfect voor een echte Utrechter. Kan geprint worden zonder support en 15% infill is genoeg. 0.2 mm layers en dan na 1mm…
I made this logo for my sons "Eredivisie football club logo collection". Made in Tinkercad from a picture of the logo. Print Instructions Print in 0.2mm layers, and change color ever 5 layers.
Poignée de porte freezer référence 2636038024 ou 331318 … Compatible avec Réfrigérateur, Congélateur : AEG, Electrolux, Faure, Progress, Arthur-Martin-Electrolux, Leonard, Zanussi, IKEA, Juno, Zanker….. les supports du ressort et la…
A fiends daughter uses a Nutricia Flocare Infinity Enteral Feeding System, however when this is carried in a backpack it is possible for the pipe to become kinked, preventing the system from working. This print was designed to hold the…
This is a remix of the original wall plate mount bracket with the following improvements: Remote holder part now has more material and is stronger. Remote holder part now has a lip to hold the remote once fully inserted. Remote holder…
Feets for the Fujitsu Futro s740 thin client computer. Just use them in place of the original ones FreeCad files are added, so you are free to midify it to your needs. The repair connector is used in case the original studs are broken…
Just wanted to organize my setup a bit so i took some time to design this.
