Counting matching models…
These are servo mounts designed to fit the Vanquish Phoenix crawler when using an AGFRC B26CLM servo. Printing: - Back mount requires supports (included in .3mf; please see the screenshot for reference). - Use 4+ walls and 100% infill for…
The Head of a Frong Species. Believed to be the head of a yet Identified Frong Military General (due to skeletal like neck armor and large blunt weapon shaped indentation on top of skull). This item was recovered within the living…
Welcome to The Low Poly Auto Show! This is an Aston Martin V12 Vanquish. Print this model with NO SUPPORTS if your printers bridging is adequate. Details/fit may not print as intended if the print is scaled up/down. This model is designed…
Ein kleiner Akku bzw Elohalter für die VRD Serie von Vanquish, Der Akku sitzt direkt hinter dem Getriebe Jetzt auch kleinerer Tray der auch Tiefer sitzt. Meine 2200Mah Akkus passen trotzdem noch Zum befestigen vom größeren Akkuhalter 2…
The stock tube trays from Thermo only hold Thermo MS vials which are far too small for sample fractionation. Hence we designed a tray holding 2 mL tubes and printed it. Note that you need to mount the appropriate data matrix codes (these…
Part Description: R ear flat Shock-Towers for Scaler withs Flatbeds like RC4WD K10 or Mojave II No holes on the loading area for the shock absorbers. No cantilevers. Pinted in PLA with 15% infill, if you like it more stable use PETG or…
After way too long, I've finally finished the non-airsoft version of this project. Please enjoy the static prop version of the MGR-L1 Promise, MGR-A1 Vanquisher, and MGR-C1 Charger. Designed with PLA and PETG printing in mind. Supports…
This is Printed upside down. Holes for mounting need to be drilled after printing. I used holes that already existed in the frame rail and spare screws included in the kit. The velcro was also part of the kit. BTA servo mount and stubby…
Got an old Tamiya Vanquish recently and the only part that was seriously damaged has been G11. Quickly found out that this part is know to break, so I decided to improve it and make it 3D printable. I removed the holder for the resistor…
This is an alternative dig servo mount which removes the battery tray and allows a small servo to be used. I have used a Corona DS-238HV so cannot guarantee what other servos will fit I used PETG so it is hopefully strong enough, it will…
This print allows for a smaller servo to be used for switching DIG and Overdrive. There is no need for a full size servo so using smaller servos will also improve your CoG. Servos used are Corona DS-238HV, I cannot guarantee what other…
This is a custom dummy lights inspired from the POORIGIN set created by Jerry Scaler with the labeled Toyota TRD logo. This is my first printed in my AMS lite. Printed in Bambu Lab PETG-HF filament with the settings below with AMS Nozzle…
A standard turret and Vanquisher or Battlecannon option for the fantastic body of the Macharius Vulcan Tank by Jaker3278. Please note that this turret is made to fit for the original model. It has been related that this model is larger…
These are servo mounts designed to fit the Vanquish Phoenix crawler when using an AGFRC B26CLM servo. Printing: - Back mount requires supports (included in .3mf; please see the screenshot for reference). - Use 4+ walls and 100% infill for…
A small and simple side mirror for your VS4-10, or other RC bodies. Prints flat on its face, no supports needed. I printed this in TPU so it flexes instead of breaking. Stick on a circle of aluminium tape or tin foil for the full effect.…
This allows the installation of Vanquish H10 front steering axle in vehicles equipped with 3-link suspension (VS4-10 or similar). The piece attaches to the axle with the lower shock bolt and the bump-stop screw. The panhard attaches with…
The roof rack with the GoPro mount is mounted to the rails with M2 screws. For use with Gopro standard Quick mount.
I needed a way to securely mount the servos on my VS4-10 builders kit chassis. Since I was using a custom body and some other modifications, other options didn't work for me in a clean way. I can''t guarantee that this will fit with the…
Need to get your VRD Mullet off its tires? Here's the print for you! Design Fully parametric Fusion design (F3D provided). Key parameters are axle height and width. Each front and back stand prints as three separate pieces. Two identical…
I had 2 fenders on my VS4-10 snap where they are bolted to the chassis with 2 bolt next to each other, near the bumpers. Maybe I screwed them in too tight. These washers are supposed to reinforce that area. Print 4, one for each corner of…
Found this character on a games mod hub, Sorry cant recall exactly where. Most likely the model was extracted from the game? : ) Print instructions Category: 3D Printing Tests
There is a Rollbar-Cage for a Vanquish Phönix Hab hier mal nen Cage gemacht für meinen Phönix, diesen gibts noch als mittel und kurze Version
Some parts for mounting 5mm Leds with the stock light buckets
Autosampler trays for Vanquish autosamplers based on Thermo's specifications . All trays that they provide are included here however a parametric fusion360 file is included if you want to make modifications. I have included the datamatrix…
Front upright/steering arm for Tamiya Vanquish. It will also probably fit the Avant, Egress & Vajra. I made this because the steering arm broke after a minor collision with a wall. This should be stronger than the original. The holes for…
A camera mount to attach to the rear wing of the Tamiya Vanquish R/C car. This will fit any micro camera that is 19mm wide. The mounting holes are exactly 30mm apart, so you could use this for other applications.…
Prevent damage to your flow cell when it's not in the detector
This reinforcement is only compatible with the V 10 coil. An extended screw is designed for this reinforcement, which tightens the reinforcement using the M8 thread in the reinforcement. I added another reinforcement design v2. The…
PinPointer holder for Minelab Vanquish. I used a M5x40 countersunk screw and an M5 nut to connect the two parts around the detector rod. I glued felt to both inner parts of the sleeve to protect against scratching the rod and for better…
The Head of a Frong Species. Believed to be the head of a yet Identified Frong Military General (due to skeletal like neck armor and large blunt weapon shaped indentation on top of skull). This item was recovered within the living…
Hi all. I really liked the model: Frong Species Head in Carbonite / Vanquished General Author: https://www.printables.com/model/755439-frong-species-head-in-carbonite-vanquished-general I wanted to change it up a little. Initially I…
Modeled this SCX10.2 flat skid to install a Vanquish VFD transmission basically as far forward as possible. Used this along with the Xtra Cab trays I also uploaded. Certain bodies may require some modifications to the body and/or the…
Foot of Vanquished Enemy that wore sandals Dice box, Dice Tote. I would print the bone cork separately in a flex material. _ Its an exact boolean cut from the foot opening so use your best judgement if you decide to resize the cork area.…
Designed a couple grilles for the H10 optic. I printed them in both asa and pla and they both printed out great.
Sliders and body mounts to fix the SBG (Carbon or 3D-printed) Volvo Sugga body onto the Vanquish Products VRD chassis. Suggested print settings: Material: PLA-CF / PETG / ABS (Printed parts in photos are PLA-CF) Orientation: Print upwards…
All 3d files should be free. Enjoy this 2 door mount for the Mojave onto a VRD. Print with alot of walls for strength if needed.
Mount yer K10 chevy from rc4wd to a vs410 chassis from Vanquish. (also works for Toyota xtracab) print with like 6 walls for strength if needed.
