Counting matching models…
This is a mount for the new Starlink Mini antenna. It has spacers that can be scaled in the Z axis to adjust for different van roof ribs. They also act as a cable wrap for the 50 foot cable that comes with it. For the 2023 RAM Promaster I…
Default size: 7 cm. Print in resin for more details. For any feedback, questions or requests, please write to me: [email protected]. v1.1
Remix to fit on smaller printers. Using PETG glue together with PVC glue for best strength
The shafts on your radio for these knobs may or may not have little metal clips attached to them (see pic on right), which changes the diameter. Make sure you print the knob with the correct sized hole, either “WITH CLIP” or “NO CLIP”.…
This custom hook is designed for Fiat Ducato and similar models. It fits directly onto the seat belt nut, providing an extra hanging point – perfect for camper vans to keep items organized. For secure installation, a strong mounting…
Clip in dividers for you camper van's fridge. Two different heights, 3 and 6 cm, two different directions. Should work for fridges with 15 (might be a tight fit) to 24 mm between the grid. Trenner für den Kühlschrank im Camper. Zwei…
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
keder tarp clip remixed printed with PETG 15% infill 0.2 layer height print direction on side prevents layer brake (see STL) Use M5 Screen / Nut for this like it's in original.
Print the two parts and glue one to the other. It is recommended to print in two colors to highlight the text. ………………………………………………………………………………………………….. Imprimir las dos partes y pegar una con otra. Se recomienda imprimir a dos colores para…
Print with 0.16mm Layer height with color change when the Vans text starts printing for best results and look.
A really excellent model to provide additional large cup holders for Mercedes Sprinter Vans. This works with any late model Sprinter, and RV vans like Revel, Terrain, Launch etc. The mount is separate from the cup holder and is attached…
This 3D model is designed as a Door Retainer Catch specifically for caravans, providing a practical solution for securing doors while parked. The model is optimized for 3D printing using PETG or similar plastics known for their high UV…
When attaching the flight surfaces for the Vans RV series of homebuilt aircraft it is often pretty difficult to achieve it without losing your temper so I created a couple of little tools, one for AN3 bolts and one for AN4 bolts that I…
4mme base with 0.8mm lettering sticking out Strong keychain i Put 100% infil for better strength
Vans "Off The Wall" logo in 3D. 5mm high.
Press fits together and stays put if you have a well calibrated printer. Printed with PLA at .2mm and works great.
Looking for a Nice case for your 18650 batteries which is a perfect fit ? Not too loose not too tight, this case is just for you and will stand out with the original version of the Vans skateboard logo that was designed in Costa Mesa,…
A printable replacement part for the cubbord latches in Adria motorhomes and caravans (The brown latches). They are not 100% similiar, but they are close enough that they get the work done. The part called “Drapwer Catch” has a 1.5mm…
This is a decorative Vans logo that you can set on your desk. It is best printed in multi-color, where you print it one piece at a time and set a "filament change" at a certain layer. Any printer can do this, not just multi-color…
Designed this for the Toyota Proace City. This van is the same build as the Citroën Berlingo, Peugeot Partner/Rifter, Fiat Doblo and Opel Combo. Also works on bigger versions, like Toyota Proace, Citroen Jumpy, Peugeot Expert, Fiat Scudo…
I find myself doing lots of repairs other people are unwilling to do. There are more mobile homes manufactured homes and people living in large campers around me then stick built homes. If you've ever worked on an RV or mobile home the…
Added photo of orignal part. my caravan is a Knaus but i think these are use in others aswell
Simple one color keychain inspired by Vans Old Skool
The Designs Goal was to to keep the Pack inside the Footprint of an Standard Acid Car Battery. Readymade Packs are always to tall to fit in one of the Batterystorages under the Front Seating of my VW T3. For the outer Framing use 10mm…
Please like and download this was very hard to make!!
I made this spacer especially for KNAUS camping windows. The reason was that a standard camper window opens at least at about 30 degrees (see pic 2&3) which is too much when you are going to sleep, rain is coming or you go away for a…
Rapide est simple à imprimer, rénovez vos anciens playmobil avec cette pièce manquante. Imprimé en PLA
We designed a small field kit box with snap closure. In World War II fashion a labell on the kit discribes it's purpose. I use 1.2mm x 31.8mm Wire Brads to secure the hinge.
I couldn't find a keychain design that I liked, so I designed it myself. For a better finish, print the logo facing down. Print Settings: Layer Height: 0.20mm Infill: 10%-15% Infill Type: Grid Filament: PLA Supports: No Brim: No
Can't see anything like this on Printables, so just adding for exposure from Remivans ' Thingiverse make. https://www.thingiverse.com/thing:3281005/files Going to use to add to my niece's play set :D
UPDATED VERSION HERE: 🚗 Solar Meshtastic / Meshcore Car Node – Any Panel Edition! Tired of the original solar panel being constantly sold out? I’ve remixed this awesome low-profile car node so you can use any 5V solar panel you want! This…
My work truck is a 2012 GMC 3500 with a 12' box attached. The knob for the window cranks on these vehicles are of piss-poor design and material. So i fixed it, no thanks to GM. The print is one piece and utilizes a "captive nut" system. I…
I made this spacer especially for FENDT camping windows. The reason was that a standard camper window opens at least at about 30 degrees (see pic 2&3) which is too much when you are going to sleep, rain is coming or you go away for a…
The one that came with the desk broke and so I redesigned one to be more durable and easy to print. You need to bring both files in as a multi-part print. Set the hexagon bottom with the following print settings: Walls: 0 Top Walls: 0…
A model depicting one of the main characters from the "Inazuma Eleven" series.
52mm gauge and lock switch mount to replace stock switch panel. The original lock switch clicks into place as per the original panel and the the whole gauge mount also clips into place in the original dash piece. The included gauge back…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
For the cost, one would expect a better finish that what is provided with the CAVans Dog Bed (v1). This can be printed in TPU to provide a friction fit at the untrimmed end of the table leg, to prevent it from scratching the floor. This…
Několik slovanských symbolů v podobě klíček. Several Slavic symbols in the form of keychains.
Der Luftdurchsatz eines kleinen Pilzlüfters ist sehr gering. Speziell in Bad/Toilette eines Wohnwagens reicht das nicht aus. In meinem Fall handelt es sich um den serienmäßigen Dachlüfter in einem neuen, kleinen Sterckeman - Wohnwagen…
CCS cover for lower port with a hole for the rubber strap fitted to Stellantis (and Toyota) EV vans. Printed with hollow side down and tree supports. Mine's in PLA - it's behind a vehicle flap so isn't weathered. Rubber strap end is a…
Use this simple fixture to hold your stabilator while drilling by hand or using a drill press. 20% infill. Clamping the part is not needed, simply clamp the fixture and hold the part while drilling. Holds the part on both sides and…
The water knob in our Caravan were broken, so i draw this from the old one. Will propably fit on a lot of caravan brands as it seems to be a universal type. I made it in PLA and it has been ok for about two years now.
I purchased this b-pillar table mount for our 2017 RAM Promaster camper van. There is about 11mm of dead space between the back of the trim and the body of the van and without this support the mount was a bit flimsy.
This 25mm table extension can be stuck under the original table of your Fendt caravan. Have a look into my CAMPING & Co. Collection to find more useful camping gadgets. Have fun. Material: PETG: Infill: 25% Layerheight: 0,2mm
Instructions: Get some 8mm fiberglass tent spare poles, length depends on the size of your car. Get some textile, fold it over the fiberglass and sew it in place. Don't make it too tight because you want to be able to disassemble the…
This is not an easy thing to do! You're definitely destroying your shoes, at least I had to to wire up the LED noodle. I also don't know how long those noodles will be safe in this configuration. I just wanted to have LED noodles on my…
beide seiten mit Sekundenkleber zusammen fügen.
I absolutely love the Catan board made by @Cadvan_886440 . Its absolutely a work of art in so many ways. In their edition he has a marsh tile and I am used to a desert tile so using his models as a base I made a desert tile! No where near…
I love my Wayfarer Van conversion (Walter) but I've had to do a fair amount of work to silence some of the pieces in the conversion. These models are pads (print in TPU 95) that fit on the corners of the boot boxes to reduce the rattle…
Několik slovanských symbolů v podobě medailonů Several Slavic symbols in the form of medallions
Několik slovanských symbolů v podobě klíčenek Several Slavic symbols in the form of keychains
This is a scalable universal cup holder. It can be mounted standing on the lid or hanging on the base plate. It is designed in Freecad. The drawing can be easily modified. It can easily be enlarged in the slicer. An enlargement of 114%…
Simple Caravans & Motorhomes Hook-Up Lead adapter rain shield. Ours is connected to an outside socket, so hangs down, and in bad weather can fill with water (despite the factory rubber seal) and trip out the electrics. This modification…
Created using PLA-CF material
lock for caravans and cabinets
A layer height of 0.20 mm works great, and you can scale the model to any size to fit your space 🤙.
Questo portachiavi stampato in 3D presenta un design moderno e accattivante, caratterizzato da un contrasto netto tra il nero e il bianco che ne esalta i dettagli. La forma combina in modo creativo una lettera stilizzata con il profilo di…
Simple STL that has the required 84 degree drill angle guide.
Had this weird problem when playing my drums with the Evans SoundOff mute pads. They were coming off the toms..... The pads are very thick and, for some reason, they were not staying in place. Made this quick modification with Tinkercad…
Několik slovanských symbolů v podobě medailonů. Several Slavic symbols in the form of medallions.
Několik slovanských symbolů v podobě klíček. Several Slavic symbols in the form of keychains.
Are you tired of stinky shoes inside the Campervan? Are you tired of leaving outside and put on your weat shoes because the puddle of the night rain? You don't want insects on your shoes? NO PROBLEM! You can install the VanShoes to your…
This is just a small simple box to contain the PCB and a Wemos D1 mini from the P1 reader project over at github. https://github.com/psvanstrom/esphome-p1reader The fit is pretty tight and when inserting the PCB you ned to push the back…
Features Dedicated compartment for the SSD Integrated cable storage Compact travel-friendly design Snap-fit lid Prints without supports Ideal for everyday transport and keeping your SSD protected inside a backpack or laptop bag.
Vans Aircraft RV-4 Rudder V-Blocks and Spacer. ¼ Inch dowels to join. Need one of each V-Block and 3x Spacers. VB-1 attaches to holes that are a ½ inch from the end on the spacer. Drawn in solidworks from vans drawings. Models are for…
Několik slovanských symbolů v podobě medailonů Several Slavic symbols in the form of medallions
This model features an over-ear headphone holder that's easiest to attach with silicone adhesive. It's perfect for bunk beds in campers and caravans, where space is limited. Check out my other models. Model przedstawia uchwyt na słuchawki…
Vans Aircraft RV-4 Elevator V-Blocks and Spacer. ¼ Inch dowels to join. Need one of each V-Block and 3x Spacers. VB-6 attaches to holes that are 4 inches from the end on the spacer. Drawn in solidworks from vans drawings. Models are for…
A simple model that will help you position your table while traveling. Check out my other models. Prosty model który pomoże w ustawieniu stołu na czas podróży. zapraszam do sprawdzenia innych moich modeli.
Tired of the Hobby caravan waste bin that sits on the door? Then you should print this and buy the Biltema waste bin (Art: 47-0581)
Modified S2 battery cover to contain a vanspoof module on a vanmoof S3. Looks very clean, and the e-shifter module is completely removed. I am very much a novice so this model is pretty crude, but it works. I printed in polymaker…
Made with onshape: https://cad.onshape.com/documents/63e44aa29e8fdb6cf1530ac7/w/5d33474ba955e14504a9fda1/e/5e726903f4d24d5dfb2e8d76
This is a highly practical, modular storage system designed originally for campervans, but equally perfect for home use (kitchens, workshops, garages, or desks)—anywhere you want to keep your space perfectly organized. The system utilizes…
The biggest skatepark we have here in montreal.
Simple Vans logo. Easy to change filaments on the 5th layer to make the border and lettering a second color. How I Designed This Traced over an image of the Vans sticker in Fusion360 Category: 3D Printing
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
This 25mm table extension can be stuck under the original table of your Fendt caravan. Have a look into my CAMPING & Co. Collection to find more useful camping gadgets. Have fun. Material: PETG: Infill: 25% Layerheight: 0,2mm
Had this weird problem when playing my drums with the Evans SoundOff mute pads. They were coming off the toms..... The pads are very thick and, for some reason, they were not staying in place. Made this quick modification with Tinkercad…
UPDATED VERSION HERE: 🚗 Solar Meshtastic / Meshcore Car Node – Any Panel Edition! Tired of the original solar panel being constantly sold out? I’ve remixed this awesome low-profile car node so you can use any 5V solar panel you want! This…
A simple model that will help you position your table while traveling. Check out my other models. Prosty model który pomoże w ustawieniu stołu na czas podróży. zapraszam do sprawdzenia innych moich modeli.
Simple Evans Blue Logo. Easily printable with standard profiles. Use your choice of infill and resize to your liking.
The 3D model of a simple lightbox featuring the Vans logo is a stylish and versatile addition to your space. The iconic Vans logo, known for its cool and timeless design, takes center stage in this lightbox. Whether you're a skateboarding…
