210 models
In April of 2022, Zach Freedman of Voidstar Lab unleashed Gridfinity unto the world, endless possibilities for modular storage and organization and display and limitless other possibilities were limitless! Many STLs were available as well…
Toothpaste extruder with suction cup support base - Exprimidor de pasta de diente con base apta para ventosas
Vento is a refillable activated carbon/ HEPA filter mod designed for the Prusa Core One. Simple to print, easy to install. It uses magnets and self-align to the exhaust fan opening with the help of m3 screws attached to the rear panel of…
Update: November 15th 2025 - Tested it with the Tern Sun & Rain Shield and it works just fine. Pictures at the end. If you enjoy this model, please consider making a donation to familybikeride.org. I made this to help families get on an…
A mighty smart owl-man tinkerer with natural stealth, night-vision, and some kind of ray gun? Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with…
This is a remix of the linked player inventory for Wingspan. I removed the birds underneath to simplify the model, and increased the height of the walls around the cube & token holders. Holds all 8 action cubes and up to 4 food tokens in…
Compatibility: Fits VW Golf III (1991–1998), Jetta MK3 (1992–1998), Vento (1992–1998) vehicles. Secure Mounting: Precision holes align with factory mounting points for snap‑in installation. No need for OEM rubber insert, Durable Design:…
What about a 1 hour project? Print the wind vane!!! Watch build video ( and subscribe to support me ): https://youtu.be/wLRc11sCMeE Materials needed: 1 cutter plier (for 45 degree cut) 3,5-5cm of filament (for the axle) lighter (just a…
If you enjoy this bracket, please consider making a donation to familybikeride.org. I made this bracket to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…
Modificated version of (I think) card holder, made by Predator Fan Expansion Set team ( https://www.facebook.com/groups/654138565868074/ ) I'm not sure if this is their work, I got a model from an organized fan printing group. All I did…
I designed this printable chainstay protector for my Aventon Level 2 e-bike because the bike does not come with one. After just two rides, I noticed that the chain was damaging the paint on the chainstay. The Aventon Level 2 has a very…
Assemblaggio Assemblaggio con BLTouch Testa MOD per Flying Bear Ghost 5 con 2 ventole blower 4010 per un miglior raffreddamento del materiale estruso possibilità di montare supporto per l'installazione di BLTouch Monta Hotend e PCB…
Have you always wanted your own Döner Kebab stand? All models are designed so that no supports are needed for printing (exception: customer with food poisoning). Included are: Building front Building back Advertising sign Döner vendor -…
Fan Bracket (120mm model) - Staffetta Giunzione Ventole Pc (Modello da 120mm) Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Computer
I couldn't find the Blum drill guide I bought to use with the locking mechanisms of the Blum undermount drawer glides I was installing. After checking Printables and not finding what I needed, I modeled this and printed it in a whole lot…
Deflettore progettato per deviare il flusso della ventola ausiliaria verso l’alto con un’inclinazione di circa 90°, favorendo un movimento circolare dell’aria nella camera di stampa. In questo modo aiuta a redistribuire più uniformemente…
This angle-stop is for the Blum Aventos HF which is a bi-fold cabinet door system. These files provide models to be used in place of any Blum 20F70x1 stopper (such as 20F7011 or 20F7051) but allows your to use any angle instead of the…
This is a wall mount for an Aventon E-bike charger. I got a Pace 500.3 and wanted a nice place to hold the charger. I added holes to help with cooling. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No…
Nessuna vite necessaria Cover CLIP ON ventola hotend per Ender 3 e ventola 4010 stock. Dotato di clip. Si stampa senza supporti e si installa con un click! Pesa solo 5 grammi. Riduce la rumorosità della ventola e previene l'intasamento…
KCD2 Inventory stand for Phillips OneBlade Im so excited to introduce my take on the Philips OneBlade & KCD2 contest. The organizer is clearly inspired by the inventory from the legendary Czech game Kingdom Come: Deliverance II . But…
IT Ventola radiale di 20cm, con adattatore e dischetti di centraggio, per il bilanciamento dopo l'assemblaggio Consigliata e realizzata per i carrozzieri EN 20cm radial fan, with adapter for automotive and centering discs, for balancing…
gnome inventor Category: Games
Display case I made for an aventon ebike, this specific display is called the BC280 on their website. No supports needed for print, only tried installing on the bike with a tpu printed version, you can try something stiffer but that has…
A remix of the original tool holder for the Prusa enclosure that contains the tools I wanted. Made to fit on the top left side of the enclosure using square M3 nuts. The step and inventor file is shared here, so it's hopefully easier for…
Jojo's themed guitar pick
Uso bastantes coches de alquiler, y necesitaba algo desmontable, por lo que he modificado el diseño para poder ponerle una ventosa. Modified original design in order to fix it with a sucker. This way it can be easily attached/detached.…
A Seatpost cover for my Aventon Mataro so that the standard Seatpost fits better to the aero shape of my bike frame. perintet fron regular pla
Use double side tape or make your own variation from included STEP file.
Resolução 0,2 (para sair as pontes) Resolution 0.2 (to get out the bridges)
Inventors of the South Tigris - Storage insert holds sleeved cards (may need trimming to fit). Added an STL for the expansion content. This is just a simple box container that fits in the gap above the other tiles next to the cards. I…
2024/09/29: This is the first revision. There's a textless and text-ful version, and the text is embossed so that you can select it easily for multicolour. Lots of improvements to make- there's too much space between item cards, the text…
Dopo la pubblicazione dell'estrusore per MK3S+ senza la torretta del sensore filamento, che potete trovare qui: https://www.prusaprinters.org/prints/68969-estrusore-mk3s-mmu , termino il lavoro aggiungendo un carrello asse X con doppio…
-Ventosa impresa en TPU rojo para replicar la elasticidad de la ventosa real de un desatascador. -Palo impreso en PLA madera para mayor realismo. -Resto de piezas podrían imprimirse en PLA metálico, pero yo he preferido imprimirlo en…
Skyrim inspired coins for your game session! No supports required if printed upright. Sufficient brim is essential. —————————————————————————— All my designs are protected by copyright laws. Upon downloading you agree to use the files for…
Adapter für Standard Heizkörperthermostate auf das alte Gewindemaß M40x1,5. Ich konnte im gesamten Internet keinen Adapter für die tollen elektronischen Thermostate finden, deshalb selbst ist der Mann. Bitte in PETG drucken da diese alten…
Its not perfect, but it works. I have included the STEP Files so you may make changes at your own leisure.
Uppdate 29.11.15 Added 9X4.5 blade sett, (Prop4) i hadent done this for a while so i hope i got it right. I finally got the equation curves in inventor all set, if somone wants a spesific airfoil profile let me know. This has less tip…
Este llave es Print-in-place y ya está orientado perfectamente para descargarlo y ponerlo a imprimir, tiene un sistema rotatorio que permite girar libremente la parte central del llavero
The screw on mine apparently vibrated loose and the knob fell off during a ride. (Never found it) You can't remove the battery without this knob, so I modeled this one to replace it. You'll need an appropriate M3 screw. Freecad source…
This is a food and action cube holder for individual players! Works like a charm. Printing in two colours are optional.
Tags labeled 1-30. If you receive a similar assignment, may this .3mf save you some time.
Aggiornamento 27/06/2021 Aggiunto carrello X con doppi cuscinetti LMUW8. Vedi qui: https://www.prusaprinters.org/prints/69920-estrusore-mk3s-con-ventola-verticale-carrello-x-co Nota aggiornamento file del modello: Ho diminuito lo spessore…
I designed this to mount the Bryton Gardia radar/light to the rear rack of the Aventon Aventure v2. Needs 4 M3 x 5mm heat set inserts on the front piece and 2 M3x16mm screws to bolt the back plate on. The quick connect mount is reused…
Added a slot at the top as a place to put items, familiars, tainted pacts, etc.
I ride my electric bike (Aventon Level) down to university everyday to save money on gas. As a part of my daily commute, I use a university-provided shuttle service for the final leg of the journey. The bike is too heavy for me to lift up…
VENTOLA ACCHIAPPAZANZARE E' UN PROGETTO TUTTO NUOVO ADATTO AL PERIODO ESTIVO . IL SUO SISTEMA DI FUNZIONAMENTO CONSISTE NELL ATTIRARE ZANZARE E MOSCHE E INSETTI VARI ATTRAVERSO LA SUA POTENTE LUCE UV E TRAMITE LA VENTOLA RISUCCHIARE…
Created a plaque to honour the completion of the CLUB DES CINGLÉS DU MONT-VENTOUX. Some crazy person thinks that riding up a mountain 3 times is fun. Check out the Mt. Ventoux Club page here -> http://www.clubcinglesventoux.org/en/ Used…
Windproof buttons for standard mosquito nets to be mounted on the side parts of the net.
A simple to print replacement knob for the battery release latch on an Aventon Level. It may fit the Level 2 as well, I have not tested, but they look similar. Printed in ABS on a Bambu X1 with supports.
The default headlight on the Aventon Level 2 Ebike is mounted on a small bracket that fits with the stem cap. After I swapped out the original stem for a longer one, the original bracket could no longer be used. So, I created this…
If you enjoy this model, please consider making a donation to Community Pedal Power. I made this to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…
This mounts underneath the Aventon Aventure Rear Rack (https://www.aventon.com/products/aventon-aventure-rear-rack?variant=39698087444675) to add a mounting point for devices that are intended to attach to a seatpost. I found that when I…
Adattatore Fan Longer Nano Pro per tubo da 32mm. Utile se avete una finestra vicino per portar fuori i fumi di lavorazione Puoi trovare altre foto e video su Longer Nano Official Group
It was printed in PETG with 100% infill. After installation, it is important to balance the hinge so the doors do not slam at the end of the movement. Based on part number 20K7AX1 Hinge number 20k2e01.02
Deflettore progettato per deviare il flusso della ventola ausiliaria verso l’alto con un’inclinazione di circa 35°, favorendo un movimento circolare dell’aria nella camera di stampa. In questo modo aiuta a redistribuire più uniformemente…
Ce modèle est un bras robotisé 5 axes conçu pour être entièrement fabriqué en impression 3D FDM et assemblé avec des composants standards facilement disponibles. Le système permet des mouvements multi-axes adaptés à des applications de…
This is a simple triangular knob. It was made in Inventor with User Parameters to allow easy generation of a knob for any bolt size. Parameter Description nut_width Measure the width across flats of nut nut_height Meassure the thickness…
A small jig to dril the drawer notches at the back of BLUM undermount drawers. Suitable for Blum Tandem and Movento undermount drawers. The jig also has a depth setting of 10mm. Use a drill collar or just a simple piece of tape to set the…
Copri estrusore da abbinare al crab fan duct doppia ventola 4010 radiale (https://www.printables.com/it/model/353701-fokoos-crab-fan-duct) Si stampa senza supporti. Privo di agganci per sensore. www.facebook.com/groups/officina3ditalia
English This invention has made us all rich. Especially Homer! It's simple and ingenious and it fits right in the palm of the hand. Every person in America now owns one of these. And in many cases, three or four! Designed for a 0.4…
Un distributeur de coton qui utilise le système Tisken de Ikea n'hesitez pas à aimer et poster vos makes A cotton dispenser that uses the Tisken system from Ikea do not hesitate to like and post your makes
Materiale Petg infill 99% supporti si adesione al piatto skirt 3 stampante usata Prusa i3
steampunk inventor minix figure
This is a diorama-scale recreation of the Arms Inventory that Yuri Jahad uses in the Tower of God anime / manhwa. The center sword is the Black March, while the others are unnamed and were created based on reference images from the…
Compressor fan of a friend of mine. Tried this morning and it seems to be fine. The compressor is a 5.5 HP Balma 39/270. The version used on the compressor is the full one but I also added a slightly lighter version that should be tested.…
cubre tornillos vw jetta-Bora-Vento
Aventon Level.2 comes with this odd-shaped seat tube that prevents easy mounting of an FD -- it arrives as a 1x stock drivetrain took some measurements, found a good way to solidly mount I first tried an E-type FD style, which would be…
This is a parametric design of the cat door. It is for the Autodesk Inventor 2024. You can too download the 150x150 mm version for 40 mm thick door. In the Autodesk Inventor you can easy change parameters by clicking on the upper icon fx.
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Decided to move the stock front light for an Aventon Level 2 from the handle bar to the fork. This allows to mount a handlebar bag easier and it looks much nicer on the bike than in its stock configuration. The mount attaches to a part on…
Print yourself some 1:20 scale bike-frames and grab some toothpicks and let your imagination run wild! Creatively explore the geometric complexities of 3-dimensional space and gravity, and playfully learn some basic principles of…
Wall mount for the power brick for an Aventon Pace 500.2 (though may be compatible with many other power bricks if you check your size), with channels to use zip-ties for mounting. Holes are sized for #10 screws. This mount also ought to…
Simple mounting box for HEPA / carbon filter for Flashforge Inventor and Dreamer. Nice for printing ABS. The size is close to the maximum print size on the Inventor, and bolts directly on the back of the printer. HEPA/Carbon filters from…
This is an Inventory Tracker and Cartesian RGB Color Matcher. PLEASE NOTE: This spreadsheet contains macro's because of some of the lookups it does. Windows likes to block macro's by default so once you have extracted the zip file and…
Anti-slip, secure, stable, adjustable, ergonomic, comfortable, durable, lightweight, flexible, non-slip, supportive, reinforced, protective, reliable, effective. Size: 3.1 (width) x 4.1 (height) x 0.38 (depth) cm Strap width: 2 cm…
Motivation The U-lock mount that comes with the Kryptonite kit isn't very secure – it works best with round tubes, which the Aventon Level.2 doesn't really have. Therefore, I created this instead, for which you can scavenge parts from the…
This adapter allows a Topeak Quicktrack rail to be mounted to an Aventon Pace bicycle rack, since the original mounting brackets weren't wide enough for this rack. Note that I used heat-set inserts (M6*8*8) along with longer screws…
Aventon Aventure 2's rack did not have spots for the bungees of my saddle bags( Pannier ) to clip onto so I made these. I found printing these vertically with supports worked best. I made the hole m5 and sized for an allen head style…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
doppia ventola layer per aumentare del doppio la possibilità di raffreddamento del filamento estruso, grande potenza ed alto flusso necessari se si vuole spingere la stampante al massimo... si fissa la sola ventola di destra che fa da…
Designed specifically for the Inventor 2040 W by Pimoroni, this sleek and minimalistic 3D-printed case provides essential protection while keeping your board fully accessible for your next project. Whether you're just starting out or deep…
Anclaje para tirador, o martillo de inercia para ventosas de m10.
Hardware M5 x 12 screw M5 locknut, 5 mm height original M5 screw & locknut Motivation I mounted aerobars to my bike, so the cockpit was quite crowded & the aerobars were blocking some of the light from the front light I tried making a…
The greatest inventors of all time, Albert Einstein, Nikola Tesla and Thomas Edison continue to inspire the world and drive innovation through their genius minds - and now as a set of pots with a drainer :)
This Steampunk Alchemist Engineer blends science, invention, and mechanical craftsmanship into a striking steampunk character. Equipped with brass goggles, a mechanical backpack filled with gears, and a large wrench tool, the inventor…
Schablonen um die Movento Auszügen zu befestigen
By default it's mounted to the stem, which can make things sort of crowded up there. Aluminum Male-Female Threaded Hex Standoff required.
Motivation I wanted to run a bunch of accessories on my handlebars, so I needed to move the computer mount which originally spanned across the stem. Solution Uses the original hardware, which were button head screws. 2023-10-11 Lost the…
convogliatore aria per automodello rc adatto per motore elettrico o esc migliora l'afflusso dell'aria stampato in PLA+ o ABS
This is a simple wall mount I designed for holding the battery charger that comes with a Aventon Current ADV electric mountain bike. The wall mount can be use both vertically or horizontally. I used PETG, but almost any material could be…
Es un objeto que sirve para poner la botella de gel y la esponja, en el baño o la cocina. Se le añaden 4 ventosas para poder sujetarlo en la pared. Enlace ventosas: XCOZU Ventosas Transparentes, 30 Piezas Ventosas de Plástico sin Gancho,…
The gbzh01 remix didn't support the rod that I had available, so I recreated it from scratch using his as a reference. This new version has a 22.5mm diameter hole to support a 3/4in dowel or standard bearings. The chamfer is only on the…
Bonjour, Voici un support pour cuisine et/ou salle de bain. 2 compartiments pour par exemple une éponge et un distributeur à savon. Les ventouses utilisé sont celle-ci…
Anclaje para tirador, o martillo de inercia para ventosas de m14.
Summary This is a cap to go over the top of my inhaler. I always carry my ventolin in my pocket incase I have an attack and have found that I often set it off slightly in my pocket so the first puff does not do anything. It can also get…
Print 6 to replace all of the plastic bits on your seat pad and rear back rest. Use the original screws. I use releasable zip ties to make removal easier. I print mine in ASA. You can do 100% or many walls.
![TPU/PLA Bike Chainstay Protector [Designed for Aventon Level 2]](https://media.printables.com/media/prints/910939/images/6960035_d2154b2b-50fd-4fb9-b68c-ecaf6ecbb1b8_4f84104e-0cb4-4e69-8d21-d9fa053aa65f/image_20240612170641.jpg)
