Search results: volador

Volador VX3 VX3.5 DJI O4 (lite) camera mount

Set of TPU inserts to adapt Volador VX3/VX3.5 aluminum camera mount for DJI O4 camera.

Volador VX5 T700 GPS Mount HGLRC M100 5883 and other

GPS mount for FlyFish Volador VX5 for the original antenna mount, compatible with all GPS units with dimensions of 21x21mm. No screws are required to mount the module. Print settings: Material - TPU Infill - 50% Walls - 3

Volador VX3/VX3.5 Walksnail WS-M181 front GPS mount

Print Settings Printer brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament material: TPU Filament brand: Kingroon

Volador VD5 ELRS antenna mount RP3

use the trimmed vtx mount to have room for both fits as one assembly

Flyfish Volador VX3 19mm analog FPV camera adapter

Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.

Volador vx3.5 sma antena mount

use the same conector thats on the tbs mambo sma kit power leads should feed trough the top

Volador DJI O4 Antenna Mount

Adjusted mount for the two antennas of the DJI O4 Air Unit Pro for the FlyFishRC Volador II (VD6 in my case) frame. Including screw-holes for the GPS-module. Antennas are in a 80° angle to each other, to get (close to) optimal range. I…

FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU

FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU. Found the original silicone ones are way to soft for a 19mm analogue camera. I couldn't find an STL online so i made one.

Flyfish Volador VD5 GPS GoPro Mount

Print with TPU and tree support. Version 2 has a small overhang to protect the cam. The GPS is rotated 180deg to get the cable throught the top plate. Everything gets better with coffee! https://ko-fi.com/pixbalance

FlyFishRC Volador 2 VX5 - dual antenna holder (Waksnail Moonlight Kit)

FlyFishRC Volador 2 VX5 - dual antenna holder (Waksnail Moonlight Kit)

M100 Mini GPS Holder For Flyfish Volador

M100 Mini GPS Holder For Flyfish Volador I provided the 3mf file to make it easier to make adjustment if you need to.

DJI o3 Air Unit Mount (Flyfish Volador VD5)

Print with TPU, no support needed. Everything gets better with coffee! https://ko-fi.com/pixbalance

Volador VX3.5 1604 Motor Guards (plus .dwg file for the arms)

Just modelled these to help protect my VX3.5 motors since I often times would crash in a way that would bend the bell on motor. I have not yet fully tested this designs performance in the air so please keep that in mind. You will need a…

Drone GPS Mount 22x22 mm (GEPRC M10DQ, etc.) for VOLADOR II

GPS Mount made for VOLADOR II. It may be compatible with other drones. Printed on TPU 95A 20% infill

Volador II (VD6) DJI O4 Camera Mount

Camera mount for DJI O4 Air Unit Pro in FlyFishRC Volador II (VD6) frame. Camera angle adjustable from ~5° to 25°. Replacement for the original CNC-parts of the Volador frame. Full camera protection at 25°, no part of camera protrude from…

FlyfishRC Volador VX3.5 Antenna and GPS mount

Compact antenna and GPS mount for Volador VX3.5. The VTX antenna mount requires trimming down the plastic antenna tube to fit. Sized to fit the antennas from a dual antenna Walksnail VTX, but will also fit DJI O4 Pro antennas. Supports…

Flyfish Volador 3.5 capacitor holder

Simple capacitor holder for Flyfish Volador 3.5 and rotated FC, where power wires are on the front side of the drone.

Radiomaster RP1 Receiver Mount for Volador VX3.5

A mount for the Radiomaster RP1 ELRS receiver for the Volador VX3.5 FPV drone. Fits on the underside or upperside of the frame. Hole diameter is 20mm. I used 6mm M2 screws for mounting, the 5mm M2 screws which came with the frame kit…

Foxeer m10q 180 GPS + SMA + USBC mount for FlyFishRC Volador VX5

This is a mount for the Foxeer m10Q 180 for the FlyFishRC Volador VX5, that includes provision for an SMA mount and a USBC connector that can be wired for Walksnail Avatar

FlyFishRC Volador II VX5 - front 25x25 mm GPS holder

Front GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. This GPS holder, made for 25 x 25 mm modules such as the Team Blacksheep M10Q, which also includes a magnetometer, uses the same hole pattern as the…

Flyfish Volador II VX5 - aft 25x25 mm GPS holder

Aft GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. It mimics the concept of the default 3D-printed GPS holder included with the frame, but enlarged for a 25 x 25 mm GPS module, such as the Team Blacksheep…

Volador 3.5 m100 GPS mount

A simple model to hold your GPS module in place. Should be printed only with TPU. Works with HGLRC M100-5883 M10 GPS Insert the module through the hole on the left side, then connect the wires.

Flyfish Volador Capacitor Holder

After crushing my Cap I designed this to be able to mount it to one of stand offs I have a 35v 470uF cap. 3mf flies uploaded so you can make adjustments if you want.

Flyfish Volador VD5/VX5 O3 and GPS Mount

Flyfish Volador VD5/VX5 O3 and GPS Mount Features: Designed for Flyfish Volador VD5 and VX5 All-in-one mount for the DJI O3 stock antenna and a micro GPS With and without the Omni Protection Print Settings Printer: Creality Ender 3…

Volador VX3/VX3.5 Walksnail Moonlight Mount with Dual Antenna/Buzzer/XT30 Holder

Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…

Flyfish Volador VX3 VX3.5 lollipop DJI GPS antenna mount

For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…

Flyfish Volador VX3 Runcam Thumb Pro W Freestyle Mount

original design is by FabianP on Cults 3D

Volador VX 3.5 JHE20b buzzer holder

print from tpu

Volador vx35 front cam guard small

The small model is lighter but provides less protection, no TPU in view. The large model is heavier but provides more protection, slight TPU in view. Print laying flat on the side, infill density is up to you and your weight requirements.…

Volador vx35 TPU cam mount + bumper

This part is printed in tpu and replaces the standard aluminum mount that comes with the frame. It provides more protection for longer camera's such as WS moonlight by mounting the camera further back in the frame. Note: If you have a…

04 Pro FlyFishRC Volador VX3.5 Suite

adjustable 04 pro camera, dual antenna mount, and top GPS mount made with TPU

25x25mm GPS Top Mount for FlyFishRC Volador II (GEP-M1025Q)

A mount for the GEPRC 25x25mm GPS modules, which fits where the GoPro mount is intended to be. Tested with the Volador II and GEP-M1025Q, but most likely compatible with at least all the other Volador frames and GEP 25x25 gps modules.…

Volador 3.5 elrs ep2 mount

A bomb proof mount for a (happymodel) ep2 receiver. EDIT: I made a LITE version of the mount, It's less than half the volume and thus half the weight.

Volador VX5 FPV Camera Mount

Rubber mount for FPV Camera (HDZero & Runcam) for FlyFish Volador VX5/VX3.5. I constructed this based on my measurements with a broken caliper. Still didn't print it and test fit it.

Volador 3.5 camera adapter for the Walksnail Nano camera.

Camera frames to fit volador camera holes

Flyfish Volador VX3-VX3.5 turtle fin (reversed) with battery connector

remixed from: https://www.thingiverse.com/thing:6523720 and https://www.thingiverse.com/thing:6928153

Volador VX3 3.5 custom TPU parts. Vifly Finder Mini + M10Q

https://www.reddit.com/r/fpv/s/R96kIWoKZZ

Volador VD5 hdzero antenna mount

work in progress, designed to mount to freestyle v2 stock antenna on the volador 5in frame 5mm hex standoffs

Flyfish Volador VD5 GPS Runcam Thumb Pro Mount

Print with TPU and tree support. Version 2: Increased wall thickness High border to hold cam Everything gets better with coffee! https://ko-fi.com/pixbalance

FlyFishRC Volador VX5 GoPro & GPS mount

TPU 50% Gyroid Infill

FlyFishRC Volador II 5" — GPS Mount for BZ-181 Module

📄 Description This is a custom-designed mount for the BZ-181 GPS module , made specifically for the FlyFishRC Volador II 5-inch frame. The mount provides a secure fit and keeps wiring tidy, while maintaining a lightweight and durable…

Volador vx35 dual antenna mount small

This is an update to my previous antenna mount for the vx35 frame, I've added pictures to show the weight comparison between this model and the old one. It was advised to position the antenna 90° from each other so here we are. Print at…

BN-220 GPS mount for Volador VX 3.5

Print in TPU without supports. The GPS hangs a little from the bottom so you can use the feets model that I've created to accommodate for that.

Volador vx35 vtx antenna mount

Goes on the last 2 standoffs towards the rear of the frame

Volador VX3 VX3.5 O4 Pro camera guard

no camera guard in view for up to 15° camera angle support propeller size up to 3.6" other camera guards can be added later for more agressive angles (> 15°). Printed in TPU (30% infill density, cubic infill pattern). I glued printed…

Volador VX 3.5 standoff

flip to adjust for oposite arm

Volador 3,5Inch FPV Antena mount

Just a simple VTX antenna holder for the flyfish volador 3,5 frame. Hole for VTX antenna is 4mm, printed with PLA but better to do it with somthing stronger like PETG or ABS. TPU will do too.

Volador VX3.5 BetaFPV ELRS Nano Holder

A simple mount for the BetaFPV ELRS Nano receiver designed for the Volador VX3.5 frame. The included 3D-printed receiver mount was too tight for the receiver, so I made this slightly more spacious alternative for an easier fit and…

Volador vx3.5 lolipop 4+ antena mount

Thanks to the original creator for posting STEP file, it always makes it much easier to remix. In my step file there is also simplified model of the lolipop if someone want to design around that. Can be printed at 45deg angle with no…

TX800 Mount 20mm x 20mm m2 eg volador vx35

A simple adapter mount for the SpeedyBee TX800 VTX on frames with a 20x20mm M2 mounting pattern, such as the Flyfish Volador VX35. The problem it solves: The TX800 has 20x20mm M3 mounting holes, but many small frames like the Volador VX35…

Arm-Guard FlyFish Volador VX3/VX3,5

Flyfishrc Volador II HDZero Antenna mount

pferectly fits the HDZero Antenna from the Freestyle V2 VTX bundle. the long shroud covers the whole antenna head for better protection but maybe worse detuning ? in photo is of the 65mm short shroud version. The 68mm version is the…

Volador VX3.5 - O4 Pro Spacer

I had some clearance issues with my DJI O4 Pro due to the battery cable routing, so I designed these spacers to create additional room underneath the unit. The DJI O4 Pro sits slightly higher, allowing battery cables and other wiring to…

FlyfishRC Volador VD4 Antenna Mount for DJI O3 Air Unit + RX Antenna

This is a remixed version of the FlyFishRC O3 Antenna Mount so that it fits the new Volador VD4 Frame. Print in TPU Original design by FlyFishRC

Volador VD5/VX5 BeeID v1.1 GPS Module Mount

Quick mount I designed to attach the NewBeeDrone BeeID V1.1 M10Q remote ID/GPS module to a FlyfishRC Volador VD5/VX5 frame with the existing mount that comes with the frame. Just replace the little GPS cup thingy that comes with the frame…

20mm antenna mount for Volador VX3.5

Antenna mount for FrSky R-XSR thats fits the Volador VX3.5 frame. Designed to work with the following receiver mount: Printed in 0.15mm TPU on Prusa MK4S

Dragón volador

Se imprime en diferentes piezas. Base: Los marcos de la base deben imprimirse en dos piezas distintas que luego se encastran para formar el marco. Parantes: el archivo “parante ala” sirve para ambas alas, se debe imprimir dos veces Ojos:…

FlyFishRC Volador II VX5 - aft camera mount for Yi 4K

This is a silly idea that I had and probably not a good one. Why mount an action camera in the front of a quadcopter if it can be mounted in the back? What could possibly go wrong? This was sketched up far too quickly and could be…

Volador VX3.5 Rear GPS Mount with Antenna Holders

A rear-mounted GPS holder designed specifically for the Volador VX3.5. The mount is designed to securely hold the FlyFishRC M10 GPS and other GPS modules with similar dimensions. It also includes integrated ELRS & VTX antenna holders,…

Luchadores Voladores de Lynchburg Va Hill City Howlers

Show your love for the Lynchburg Hill City Howlers, Luchadores

DJI Action 2 Holder for Volador II frame

DJI Action 2 camera holder to be used on a FlyFishRC Volador II frame together with GPS holderDJI Action 2 camera holder to be used on a FlyFishRC Volador II frame together with this GPS holder:…

Volador Vx35 Sideplates

A pair of sideplates i made for my Volador Vx35. this way the props can not fling dirt and moist in the frame.

Flyfish Volador VX3 Runcam Thumb Pro W Freestyle Mount

original design is by FabianP on Cults 3D

Flyfish Volador VX3 19mm analog FPV camera adapter

Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.

Dragón volador

Se imprime en diferentes piezas. Base: Los marcos de la base deben imprimirse en dos piezas distintas que luego se encastran para formar el marco. Parantes: el archivo “parante ala” sirve para ambas alas, se debe imprimir dos veces Ojos:…

Volador VX3/VX3.5 Walksnail Moonlight Mount with Dual Antenna/Buzzer/XT30 Holder

Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…

Side Covers for FlyFishRC Volador VX3 / VX3.5

Side covers to protect FC/ESC, included option of opening and plug for FC USB-C Port.

Flyfish Volador VX3 VX3.5 lollipop DJI GPS antenna mount

For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…

Volador VX3.5 / 3 Lighter Motor Guards

Took @Zelas_422011 's great design and reduced the weight by booling

Side Covers for FlyFishRC Volador VX3 / VX3.5

Side covers to protect FC/ESC, included option of opening and plug for FC USB-C Port.

CHICA VOLADORA ANIME PERSONAJE DE COLECCION

Miles de Modelos Gratis en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/gratis Cientos de Ajedrez en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/ajedrez Pasos Semana Santa en :…

Volador VX3.5 / 3 Lighter Motor Guards

Took @Zelas_422011 's great design and reduced the weight by booling