26 models
Edit Dec-'24: I made a much more robust solution for this here. https://www.printables.com/model/1097842-dewalt-sander-planer-to-wetdryvac-to-dwv9000-quick Rotating dust collection adapter for a battery powered DeWalt DCW200 (will likely…
Adapter to mount the GW2001 to a 1.5in pole. Allows the heater cable to be passed though. I've printed in white PLA with a spray UV coating.
Halterung für die Scheiben Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Notes: printed in pla Category: Kitchen & Dining
Don’t dump your precious Kalenjii W200 just because the strap broke apart! As W200s long owner, I felt the struggle to see the thing becoming completely useless What can we do with a full working W200 but impossible to wear, since…
I've printed it with the circular shape on the bed, using 0.3mm layer height, PLA, 20% Cubic infill, with the seam position set to random (since I think that this a better ‘air tight’ connection). No support needed. It fits quite snug…
I needed a power supply shroud to cover up the cabling and PSU in my Thermaltake Core W200 case(right side) so I made this. It's got the AMD and Ryzen logos in it for my build. I uploaded them separately so you can choose to add them or…
I bought a Shop Fox W2005 Table Saw Fence with Classic Rails to upgrade my Craftsman 113 table saw. The fence didn't come with a mounting bracket for any kind of on/off safety paddle switch. After purchasing a Powertec Paddle Switch (…
Container, lid, and lid gasket (print in TPU) to suit Wagner Paint Sprayers, series W100 W150 W200 W300 (e.g. W350 which I have). I would highly recommend sealing the inside of the container with epoxy resin. I used 24g resin and 8g…
This mount was specifically designed for a Koso EX-02 universal speedometer to fit onto a Yamaha TW200 Trailway. The challenge was getting the shape of the Koso speedometer to fit into the opening. It took a number of iterations but this…
This is the first model I’m uploading online, so go easy on me. 🙂 I recently upgraded my old MK3 to an MK4. Now that I can control it via Prusa Connect, I decided to get a small Xiaomi AW200 camera to monitor my 3D prints. The camera…
Adapter to help connect a ShopVac (2.25" OD) to the DeWalt DCW200 and anything else that might use the same connection. It has these little “balls” that should pop in to place, BUT I warn you that these are quite brittle and may snap…
In the southern United States, the heavy clay mud can jam up a front tire on a motorcycle if the fender is too low. The Yamaha TW200 does pretty well in mud, but the front fender is a little low. This bracket can be installed under the…
I created a reducer for my battery vacuum cleaner Dibea DW200 Pro, which fits to the tip of the normal long nozzle to reduce the area even more. Printed in PETG 0,3mm with 3 walls, so basically 100% infill.
About See what it looks like here: https://www.youtube.com/shorts/_z8Omeqew1A NOTE: YOU NEED TO BE COMFORTABLE WITH WIRING AND MODIFYING YOUR ELECTRICAL SYSTEM FOR THIS MOD. I AM NOT RESPONSIBLE IF IT GOES WRONG FOR YOU OR YOU RUIN YOUR…
This is a wall mount for the DeWalt SCW200 20v Sander that uses Sy's Peglock system
only for Sony DSC-W200-270
Für den Megaflow200 von Wolfbox benötigte ich eine Möglichkeit das Gebläse und die verschiedenen Düsen leicht zugänglich aufzubewahren. Die entworfene Befestigung kann angeschraubt oder an einer Skadisplatte befestigt werden. Die…
The indicator on my my 1972 BMW 2002 didn't cancel. It appears that originally, there was a piece on the steering shaft that had a tab (dog?) that rotates with the steering shaft and would push over the throw that extends when the…
This is a killswitch to replace the Yamaha 1986 BW200ES but should work on all BW200 models (Not sure on the BW350 but you can try). I recommend after you re-seat the killswitch onto the backing plate (little metal piece shown), that you…
After purchasing a ManRacks Bungee Rack for my TW 200, I discovered that the rack is far too short to adequately support the bottom of the foldable milk crate I wished to use. This rack extension lengthens the rack to ≈ 11.5" long. There…
Laser mount which can be attached to finder scope.
This is the rear turnlight for Yamaha tw200 (225) and xt200 (225) bikes. I don’t actually know if this useful for other yahame bikes, so try. When installing, don’t forget to connect light bulb fist, so you don’t need to disassemble it…
This is a wall mount for the DeWalt SCW200 20v Sander that uses Sy's Peglock system
Adapter to help connect a ShopVac (2.25" OD) to the DeWalt DCW200 and anything else that might use the same connection. It has these little “balls” that should pop in to place, BUT I warn you that these are quite brittle and may snap…
Für den Megaflow200 von Wolfbox benötigte ich eine Möglichkeit das Gebläse und die verschiedenen Düsen leicht zugänglich aufzubewahren. Die entworfene Befestigung kann angeschraubt oder an einer Skadisplatte befestigt werden. Die…
Container, lid, and lid gasket (print in TPU) to suit Wagner Paint Sprayers, series W100 W150 W200 W300 (e.g. W350 which I have). I would highly recommend sealing the inside of the container with epoxy resin. I used 24g resin and 8g…
