Counting matching models…
News March 20, 2022 added bigger hook March 21, 2022 added USB flash drive holder March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw) March 21, 2022 added box (screwed with M4x10 screw) March 21, 2022 added 2 wall parts…
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
Let's mix things up with another type of dragon: The water dragon! This creatively designed and articulate "Water Dragon" model is engraved with intricate details that capture the imagination, giving it a sense of mystique and fantasy!…
This is a bottle cap with a watering nozzle. The cap should fit any regular PET plastic bottle. The nozzle is angled by 60° to make it easier to use. Printing instructions: Use a printing sheet with a smooth surface (to avoid leaking).…
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
Create your own battle droid army and take over the galaxy! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee (PayPal). Thanks!…
NOTE: The new version linked below has much improved clips which are less visible than this version. NEW IMPROVED VERSION AVAILABLE HERE!!…
Update: 08/09/2023 Updated some slots for better fit, hip-to-neck slot is arrowed for correct orientation, and improved surface icons for orientation of "skull" parts. Also added are not boring instructions, but an exploded view showing…
a strong cable wall hook with material thrift. PETG 4 outer layer 30% infill
Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…
Updates 01-03-2023: Uploaded a new redesign. 06-12-2021: Fixed mesh issue with Basin_3x1, updated Basin_3x1.stl. 20-07-2021: Fixed the sizes of BasinCover_3x3, 3x1 and 1x3, small fix parametric parameter. 06-07-2021: Added extra drainage…
Would you like to make extra income selling these planters (and future new models)? Please feel free to check the models with the included commercial license here:…
Fruit washer bowl I received a request to model such a tool for washing fruit with water. I also like blueberries, for example, so a bowl like this would be perfect for me. Recommended only for short-term contact with food, better to use…
Modeled from scratch, inspired by lwx007's design: Thingiverse #5685812 I saw some comments about difficulties with the original model requiring assembly or gluing, and decided to make a model that can be printed in a single piece and…
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
28/8/23 Added step file for battery holder to aid with remixes 2 versions, a single battery and a triple battery version. Prints vertically, no supports Important note on scaling As the fit of the battery is so precise I would advise…
Looking for a fun holiday print this season? Be like the muffin man and bake up a tray of articulating gingered cookies! They're super easy to print! Print the base in brown and swap out filament on the last couple of layers to show the…
Underware is the universal, open-source, modular, extensible and re-usable solution for managing cables, mini-pcs, usb devices…pretty much anything, anywhere! Watch this video to find out more: Key Points Open-source design - The whole…
Update vom 21.12.21 : Ich habe die Nasen im Kabelkanal etwas vergrößert um ein herausrutschen des Kabels zu verhindern. Drückt das Kabel vorsichtig rein um Beschädigungen am Kabel zu vermeiden! Update from 12/21/21 I enlarged the noses in…
This model is design to be printed using a 0.6mm nozzle (0.4mm should be fine) in vase mode. The print above is made from Prusament PLA Gentleman Grey Recommended settings - Material : PLA / PETG - Vase mode - Layer height : 0.2 - 0.4 mm…
Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484…
Probably the most popular filament sample on Printables comes with a set of storage boxes in various sizes, 100% printable! I designed the box so that you don't need any additional parts, no screws, no magnets. There are two different…
This project has been designed in collaboration with BuildBee, the all-in-one 3D printing solution to design, monitor and print from the cloud. Learn more about BuildBee: https://buildbee.com/flowalistik The Maker Wallet is a fully 3D…
If you like my work and want more models you can support me in Thangs Yoda, a Force-sensitive male being belonging to a mysterious species, was a legendary Jedi Master who witnessed the rise and fall of the Galactic Republic, followed by…
https://www.buymeacoffee.com/maxt ---------------------- Wall hook, 12 different versions, with and without holes (for 3M Command double-side adhesion strips). Recommended print settings: - Material: PETG (it won't snap on you) - Support:…
This is a reconstruction/remix from the original one that you can find on thingiverse here . Please, for any issues contact me or leave a comment, I will replay as soon as possible!
“This is the way” The Mandalorian, also referred to simply as Mando, is a fictional character in the Star Wars franchise and title character of the Disney+ series The Mandalorian. Orphaned as a young child, Din Djarin was adopted into the…
Holder for Tupperware lids (for kitchen organisation). Big and small versions. Should fit most kinds of lids, but obviously YMMV. Can be printed without any supports if your printer can handle a little bridging (I printed the ones in the…
Remix of https://www.thingiverse.com/thing:1850850 I removed that weird looking deformation on his right cheek and ran a mesh repair on it, works great and looks better now. v2: I noticed the feet weren't flat on the plate surface, fixed…
8 different wall hooks in different size and sturdiness.
🔮 Welcome to the Wizarding World🦉 We have updated & improved this original model to have better detail & to make it easier to print. Improvements include elimination of overhangs, simulation of brickwork, masonry and shingles, hollowness…
Generate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into OpenSCAD. Great for replacing metal equivalents in many applications. Includes options to generate nuts, bolts, washers and WingNuts for…
Introducing the DIY Fly Swatter Gun, the ultimate weapon in your battle against mosquitoes. This 3D print model lets you build your own mosquito-swatting machine. Just snap the pieces together, no tools required! With a reach of 30cm,…
Updated Version available (V5): https://www.printables.com/model/1034340-slim-wallet-v5-print-in-place ------------------------------------------------------------------------- A print-in-place slim wallet that offers space for 7 cards…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
This is openGrid, a general use wall and desk mounting framework/ecosystem. openGrid uses an opinionated design, focusing on ease of use and a clear structure for all the base parts. Still it is mainly meant to be extended by everybody…
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
This is a fully printed functional mechanical clock. All parts are dimensioned to fit on build plates at least 18x18cm. When assembled the clock measures 60x42cm (weight not included). The weight is designed as a container with screw lid…
This is a remix of the popular Modular card wallet by CHKING. I've strengthened the sides a little and added a slick storage compartment on the back which keeps it nice and slim. This wallet version is only for 6 cards. Small magnets can…
Made possible by my amazing Patreon supporters! If you like my work and want more models you can support me in Patreon Darth Vader is a fictional character in the Star Wars franchise. The character is the primary antagonist in the…
A slim and compact wallet designed to hold five standard sized credit cards. Press the lever to have your cards presented to you in a convenient stacked order. The built in retention mechanism keeps your cards secure. Only 8.5mm thick!…
UPDATE 3: I have now added a fourth version as per request by someone in the comments. This fourth version is both shorter and narrower. I have also removed all files and reuploaded with better naming as it was getting confusing: V1.0 is…
Nice looking guitar hanger with a robust thickened wireframe structure. Can be screwed to a wall qith 3x 4mm screws. Guitar neck widths available: 44, 46, 48, 50, 52, 54 mm My classical guitar has a 52mm neck so I used that one. Always…
I had adjusted/remixed this model to max out the settings on an AnkerMake M5 Printer. The lamp itself couldn't be any bigger due to the constraints of the printer, but it's still just about the perfect size. The adapter for the lamp was…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Thanos, in Infinity War, is a pretty interesting guy. He's a villain, but it's difficult to dislike him, right? Also he changes outfits…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed Scale it as you like :)
a simple watch stand that prints without support, so if you do not want your watches to lay around the draw, these can be used as organizers. Print instructions preferable printed in PETG to provide some flex, otherwise an easy to print…
Intended to be FDM printed as a single piece with no supports required. Designed for continuous watch bands but should also work with any watch band as long as the band width does not exceed 24mm otherwise the lower strap will interfere…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf? It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of…
Magic Payment Wand – Pay with a Little Magic Attention please: This is a remix of DesertCruiser's model available at: https://makerworld.com/models/2282000 Turn an everyday gesture into a moment of enchantment. This 3D-printed magic wand…
Create a pit droid …. or more! (They work better in groups.) If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee (PayPal). Thanks!…
Here is a whole set of hooks in different shapes and sizes. There are so many different ways in which a hook can be used and I hope you will find some that are to your liking. Approximate sizes of the different hooks are shown in the…
Few robots are more recognisable than WALL·E; his cute appearance and distinctive personality make him instantly endearing to anyone who sees him! In this project, I designed a WALL·E replica with the aim to allow each of the robot's…
An easier to empty poop drawer for the Elegoo Centauri Carbon. Covers the factory poop door, and a nice drawer slides out the side. Mounts with the existing poop chute screws, and one replaced chassis screw. Use an M3x10mm screw on the…
Dimensions Length Width Height 1:10,000 scale 160mm 103mm 56mm Version Appearances Ship Stand Imperial I-class A New Hope, Rogue One print_sw_isd_ISD_I.stl print_sw_isd_stand_ISD_I.stl Imperial II-class The Empire Strikes Back, Return Of…
I’m deeply honored that my design was been nominated for the awards! Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects…
Print 3+ perimeters, ~24%+ infill. file sizes now smaller **added plain, untextured version and version with no text.
Screw: diameter: up to 6mm length: 30mm or more
Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram @StawiamKlocki.pl to keep up with latest designs Go to Google Sheets to get files list for your LEGO models Watch General…
I've put all the pieces together to print an authentic “The Madalorian Cosplay” with quick instructions. Please pay attention to the size of the parts! scale the parts to your size 12.09.2023 - added new model - The Mandalorian Cardridge…
The design consists of three parts : Base – mounted to the wall using screws Body – connects to the base and allows rotation of the insert Insert – the tilting hook element The rotating insert mechanism ensures smooth movement while…
Electric Cable Diameter 4,5mm -> 8mm Mounted using screws or double sided tape
Introduction Wasn't happy with the selection of water spikes out there so decided to create my own to fit whatever needs you may have! And while you're at it why not have it double as a plant label! This spike can be printed in as little…
🖨 Printing Layer Height: 0.15 mm Supports: Yes (recommended for best results) Materials: PLA, PETG, ABS Tips: Print the first two layers slower for better bed adhesion and cleaner details. Use a well-calibrated printer for optimal fit of…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…
Hogwarts Castle from the Harry Potter film franchise. I printed this at 0.17mm layer height, 1mm wall and top/bottom height, and 4% infill at 105% model scale on my modified Ender 3 in Jan 2021. It took roughly 40 hours with my settings.…
/There are plenty similar designed wallets on the web but none fit my requirements 100% so I created my version. =============================================== 9/2/22 Added VORON Edition top and bottom.…
If you like this design, check out some of my other designs like this one. What Files to Download Chose a model based on the pictures below Single Swipe: Double Swipe: Double Swipe Curved: Also available is the Self Watering Insert: Print…
For larger screws: scale the hook up in the slicer
Milwaukee M18 Battery Holder With Lock. So yit can be used inside van etc... Easy to print. Also I have created "short" version of this without lock to use inside workshop. https://www.prusaprinters.org/prints/53685 Print instructions…
These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…
Modern Wavy Vase Added files for vasemode and a solid wall version. If you want to support me or get a commercial license for this model, you can join a patreon membership: https://www.patreon.com/SabreDesign Check out more of my designs…
Customizable OpenSCAD version of the Honeycomb Storage Wall that allows creation of custom grid sizes and irregular shapes. About OpenSCAD OpenSCAD is a free software that facilitates parametric 3D modeling. If you are unfamiliar with…
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. They are the two midle part in the files. You can fix them together with glue. You can scale the parts as you want but…
The Wankel rotary engine is marvel of modern engineering, and now you can experience the wondrous complexity of it's mechanical operation in the palm of your hand! The assembly consists of three pieces, all lightweight and easy to print.…
Create your battle droid army and take over the galaxy! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee. Thanks! Check out my…
Article with build instructions: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/ Material: Prusament PLA Galaxy Black
This is a design for a minimalist watch stand that can be 3D printed without the need for support structures. The stand is intended to help you keep your watches organized and easily accessible instead of having them lying around in…
Remix eines Batteriehalters für Milwaukee M18 Akku. Boden abgeflacht um mit PLA bessere Druckergebnisse zu erhalten
Print Time 91 Hours. 20 cm height 0.4 nozzle. Easywood Coconut filament 0.15 layer height Slicer layers used to set more quality. Easywood feels like real wood and it even smells like it :-) Very cool filament. Got the model from Byambaa…
It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…
🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…
Thank you all for the many overwhelming responses! Because I have noticed that many have additional wishes and would like to put their own spin on the design, I have decided to change the license and allow remixes. To help you get…
I liked the model of the Hogwarts castle a lot, but wasn't able to slice it due to net errors. By repairing it with blender I used the chance and added multiple languages for the sign. If you miss your language or I made some mistake…
Update I am working on a slightly modified version that will work better with Bambu Lab's “TPU for AMS” - which is a harder plastic than standard TPU. While the use of this new flavor of TPU is probably more applicable to Bambu Lab users,…
This space saving battery dispenser is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. There is a Voronoi pattern on the sides of the magazine to make it easy to see how many batteries are left. The drawback of this design…
Minimalistic Dock for Apple Watch - version 2. Suitable for both USB-A and USB-C type chargers. Model was tested with genuine Apple chargers: plastic and metal one. Both have similar diameter which is 27.8mm and 27.7 mm, with the depth of…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
13 named infill swatches and 1 blank swatch. Great for a quick reference to each of the 13 infilled types in PrusaSlicer. One Swatch takes about 40min (the STL file is for Gyroid Only) New Version 2 is here:…
Print Settings: 0.4 Nozzle 0.2mm Layer Height 40% -60% Infill of choice 5 Perimeters Printed fine without any supports on MK4. I used Prusament filaments. Materials and Tolerances: PLA with T-0.1mm pretty much screwed in without any post…
If you like my work and want to support me bringing you new content please consider supporting me on Thangs Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. You will find 3 folders. One for Resin with…
Mounts for Makita 18V/14.4V LXT battery and tools. Loose fit, easy to mount and unmount. Printed in PLA. Other plastics may have a different shrinkage rate, so model adjustments may be needed. Print instructions Rafts: No Supports: Yes…
Honeycomb storage wall with borders for mk3/4 size.
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
It can hold heavy backpacks and, for no additional cost, lightweight backpacks too. Perfect for students who have bags full of heavy books. For best results, print in PETG with 15% infill. No supports needed. 9/9/26 Update V2.1 has been…
**Update V2 in much higher detail. **I guess you can cut it with the new slicer by your own. Porsche GT3 RS detailed silhouette. Easy to print for up to 80cm length (4 parts) on Prusa MK3/4 bed size. Of course you can scale it the size…
![Modular Display Stand for LEGO Star Wars / DC / City [Main Project]](https://media.printables.com/media/prints/267597/images/8102146_4a778b8f-e3b6-4ded-82a1-d47a535d9e47_03546910-d95f-4a36-8f71-1214f98a583e/cover.jpg)
