Miniature Bases in Warhammer Sizes
A range of circular, oval and rounded rectangle bases sized equal to those produced by Games Workshop.
- Downloads
- 5,976
- Likes
- 371
- Rating
- 4.93
Counting matching models…
A range of circular, oval and rounded rectangle bases sized equal to those produced by Games Workshop.
Updated 28th August 2024, current list of bases: 25mm round 25mm slotted round 25mm hex-hole round (Skaventide box) 32mm round 32mm hex-hole round (Skaventide box) 40mm round 50mm round 60mm round 60x35mm oval 75x42mm oval 105x70mm oval…
A support-free simple yet cool looking miniature riser for DnD, warhammer, flying creatures or just for displaying minis Features Printable without supports Beautiful chain texture Sizes for different common miniature base diameters (let…
These miniature bases are compatible with Warhammer 40k, Age of Sigmar, Battle Tech and many other table top games. Available WITH and WITHOUT hexagonal holes for the miniature pins. We recommend to print upside down on a textured plate…
print it upside down. .2mm layers. textured PEI looks best imo
Warhammer 40,000 11th Edition Terrain Area Footprints This collection contains printable terrain area footprints specifically designed for use with Warhammer 40,000 11th Edition. The set follows the official terrain footprint sizes used…
I've been looking for some nice looking stand for my minis and I've found one designed for ThomPerry63. It was designed for resin printing, and since I'm using mainly PLA I've tuned it to use it. Changes: filled the bottom, so you dont…
These miniature bases are compatible with Warhammer 40k, Age of Sigmar, Battle Tech and many other table top games. Available WITH and WITHOUT hexagonal holes for the miniature pins. We recommend to print upside down on a textured plate…
D&D Knight with 2 handed Warhammer
This is a set of square and rectangular bases, with and without slots, compatible with Warhammer Fantasy miniatures from the 1980s to early 2000s. The bases are solid, so the thickness of the top and sides of the base should be set in the…
Safeekeep your troops!
Warhammer 40,000 11th Edition – Matched Play Terrain Set Dear Wargamers, Thank you for downloading this terrain set, designed specifically for Warhammer 40,000 11th Edition – Matched Play . This project was created as our contribution to…
Shapes adapted from GW's released Terrain Area Footprints PDF, which although they don't precisely match the dimensions they have specified should match any paper print and likely their own released templates. Infilled with hexagons to…
Just a quick base I threw together when my box set came missing one. Save yourself 5 minutes in fusion!
My friend needed a combat key for his campaigns so I designed and printed a bunch of these!
The bases are the size normally used in Warhammer The Old World, if you want another size I can make it. They are 3.5mm tall and have a 2mm space between the base and the top. I printed them at 0.12mm and 20% infill, with the top facing…
There is not much to say. I believe that the photos are self explanatory I printed with PETG but PLA would work too My son is named Felix. Please replace the name by yours or anything else as needed
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
I struggled with transporting my minis when playing Warhammer 40k so i sat down and deigned my own solution. As usual, i overengineered… Result: a stackable, modular system that should fit most Warhammer 40K minis. Simply print the box…
Warhammer siege wall for battlefield building
This is set of fillings that enhance default bases of warhammer miniatures. It fits exactly into the “empty” space in the base and contains dedicated space in the middle for magnet placement. Size of supported magnets are 3 or 5 mm in…
For magnetizing, I recommend 60 mil flexible magnetic sheets (I haven't added them yet in the pictures). I am using Dragon Shield matte sleeves for the regular sized cards, and BCW "Continental Postcard" sleeves for the large format cards…
Designed to be a sturdy tray to hold any 32mm round base models. 4 finger holes in the middle to help pick up the tray and to lessen total weight.
Personal modification for Leblasto Scully V2 You can purchase and get the blaster files here . This is a small mods for the Scully V2: The muzzle: just glue it on like the stock orange ring Space marine emblem: glue to anywhere you like.…
A simple globe to display your favourite LEGO, DnD, Warhammer miniatures on the Christmas tree. There are two versions: One with a flat bottom for 28/32 mm scale miniatures (Warhammer, DnD, rpg). One with LEGO compatible studs for…
Warhammer 40.000 - Warhammer Age of Sigmar wound marker This is a easy to print Warhammer wound marker for Warhammer table top gameing, like Warhammer 40.000 and Warhammer Age of Sigmar there are two STL Models for 3 dices and for one…
A Rosette showing status as an Inquisitor working above and beyond the Imperium of mankind to protect itself from the enemy within, without, and beyond. Check out my collection of props! Plasma Blaster -…
Sometimes measuring distances with a Tapemeasure can be tricky, espacialy short distances between models for unit coherency etc. So i drew up a few simple measuring sticks that can be inserted between bases from above. 08.2025: Added 4",…
UPDATE 2/13/25: It was brought to my attention that the attached scad file is incorrectly doubling the length of the oval. This file was created during my early time with OpenSCAD and it is definitely wrong. Sorry to anyone that used it.…
For 6 citadel paints and 3 brushes
I created this model for Conquest: The Last Argument of Kings but it would work on any wargame that requires you to draw a 45 degree line from a model with a square base (Warhammer The Old World?). Makes figuring out line of sight much…
Hi there! This is my take on a 3-model squad base for 90mm oval base miniatures. I designed this specifically for use with my Blood Angels assault bike troopers, but it could obviously be used with anything on a GW 90mm oval. I haven't…
Hi there! This is my own take on a 3-model squad base for 32mm diameter base miniatures. I use these for my older style Blood Angels space marines for Warhammer 40k, but these would work for just about any game using minis on the same…
The Kill Team tokens are shaped like they should fit against your model, but in practice it's difficult to keep them oriented that way. I made these models to keep tokens in place and oriented around the character they represent. The Base…
Help speed up your WH40k or AoS games with this little gauge. Add a color change to help it stand out on your games! Avaliable for purchase with 9" & 12" gauges on Etsy: https://hotmess3dprinting.etsy.com/listing/1905415499
Warhammer 40K Bolter Boltgun.
A Bolt Pistol is a smaller version of the Bolter in standard use by the Space Marines. Now wieldable by the 13 Series. Remixed from Lance Greene's Boltgun model. Print upside down with supports
This is a set of big guns, all fitting a common mount remixed from the awesome Terrain4Print with added Magnet slot in the Weapon Base and Weapon sled. Quick swapping of weapons on the tabletop Fully functional swivel of the guns NEEDED…
I wanted a card box that could accommodate sleeved cards and stack for storage/display. Test prints were done on an X1 Carbon with a 0.4mm nozzle and 0.2mm layer height without supports. Depending on print quality the lid may not fit…
Hi there! This is probably the silliest thing that I've ever printed. I previously made squad bases for 25mm & 32mm diameter minis, but thought that it would be neat to see if a 3x 100mm squad base could fit on my MK3+ print plate. It…
Warhammer The Old World base converter configured as movement tray. There are versions for magnets and another for metal sheet, if the magnet is attached to the model (preferred for me at least.) Category: Games
Base with inset for 10mm magnets to be used with floating tank units. The turntable function works with or without the magnets, but the magnets will secure the stem to the base during gameplay. Base is a solid piece for printing without…
A movement tray for 32mm bases Magnetic - designed to use 5x2 magnets. When printed with a 0.4 nozzle, they fit snug but I still used super glue, just in case. This may depend on your printer or filaments tollerences once printed. Used…
a gauge to mesure distances at tapletop wargames
Detailed pipeline prop for tabletop terrain [Warhammer]
Warhammer ruller, numbers can be inward or outward. Made using tinkercad.
Two rulers to be used as combat gauges for Warhammer 40k or Age of Sigmar. The shorter 6 inch ruler can be used for determining engagement range, and the movement of most infantry models. The longer 9 in ruler is for quickly adding new…
UPDATE 20.12.23 - Added a tray that hold 20 20x20 mini I'm realy beinging to get excited for Warhammer Old World, and to that end I've been building up a bretonnia army, its got to the poin they need movment trays, and so now they have…
Some laspistols and lasguns if you want to bake a potato
Wargaming Measuring Widget - For KillTeam Warhammer40k and similar. Edges are: 1" 2" 3" 6" With 1" notches (except for the 2" side for a cleaner print). Hexagon is 1.5" across (flat side to flat side). Slot is 0.5" wide, 3" long. Print…
Terrain suitable for upgrading your Warhammer Underworlds experience. Expect more models (soon).
Dwarf warrior with 1 Warhammer
Warhammer Fantasy movent trays adapted for the new standard base size of The Old World.
Hi there. As far as there are many trays on market, I have decided to build my one to have for all my 25x25mm bases exactly fitting one. My tray has 108 x 133 x 6,2 mm. There is hole for magnets on both sides 5x1mm In package you can find…
The Ironhold Vanguard is a heavily armoured frontline defender built for high fantasy campaigns and tabletop warfare. Equipped with a massive tower shield and crushing warhammer, this warrior is designed to absorb damage and protect…
Printed in black PLA with 0,4 mm nozzle, 0,2 mm layer and 15% infill. I scaled it to 102% so it just fitted the plate on my Prusa Mk4S.
DIY 3D-printed Tabletop LED-Objective-Marker for WARHAMMER 40k etc. Need more tabletop stuff? Have a look at our Warhammer collection . More in our blog:…
you need to print 4x Large rectangles: 7” x 11.5” 2x Large right triangles: 8” x 11.5” 4x Medium rectangles: 6” x 4” 2x Long lines: 10” x 2.5” 4x Short lines: 6” x 2”
Step up your Warhammer and 40k miniature presentation with our dedicated base topper cutter. Designed specifically for Warhammer and 40k base sizes, this cutter allows you to craft base toppers out of clay, adding depth, texture, and a…
I didn't like objective markers I found elsewere, because I think they're too thick. These are very thin and flexible, and still strong enough. Hardly cost any material and print in +-35 minutes on a 0.4 mm nozzle. So no problem if one is…
I tried to find the Original but it has been removed. It was on Tinkercad, probably why its quality was so horrible. Picture included isn't the actual model, but it's a filler until I get a actual photo,
A friend of mine is an avid Warhammer player and collector. He asked me if I could make a “Base Converter” so that he could use the figurines that have round bases in games that requires square bases. I am not a warhammer player myself,…
Stand firm and unbreakable with this Warhammer Paladin Knight , a commanding fantasy warrior sculpted with strength and noble presence. Clad in layered plate armour with regal red accents, this knight rests a massive war hammer across his…
PLEASE GIVE A LIKE IF YOU DOWNLOAD ;) the tab battleruler is specially developed for the tabletop warhammer 40k. With this measuring tool, 1 inch, 2 inch, 3 inch and 9 inch can be measured very quickly, which are particularly important…
Here is a collection of movement trays for minis from older Warhammer bases to the new larger format.
Flip model upside down in the slicer so you don't have to use supports! From The Warhammer enthusiast.
Hello All! Here is a OSRS Dragon Warhammer model that I created. This model is not an exact replica of the in game Warhammer but a homage to the item that is easier to print. I created this model in many pieces that all link together with…
A remix of the Armor Breaker Mace from Triple G Workshop
32 mm round bases with a textured top surface. Diameter: 32 mm · Height: 3.25 mm mini (max 6.25 mm for Rock 01) Gravel 01 - Rounded gravel - 5 variants Gravel 02 - Rounded gravel "bigger" - 5 variants Rock 01 - Rocky surface - 5 variants…
Some basic tokens I designed for Admech in Warhammer 40k 10th edition. Not sure if all of them are useful, simply print whichever ones you want and however many you need. If there's anything I should add feel free to let me know. These…
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
Glued everything together with some 2 components epoxy. Parts you need: Everything needs to be printed once. Except for a few files. 2X Handle decal A and B 12X Silver nub Colors used. 3Djake EcoPLA black 3Djake EcoPLA bronze Fillamentum…
Hello Everyone! I was ill so rather than creating my own tool I remixed this one, my rotary tool is a cordless one and has a small mount so I used an M3 nut and bolt to be able to attach it and then hold the paint with an elastic band.…
120x90 oval flying base with slot to allow for disassembly of flying stand. Saves a lot of space in transport. Works best printed in black ABS/ASA on textured plate.
This foldable ruler is designed to quickly be able to measure the most common distances you run into when playing Warhammer 40K 11th Edition with just one tool. 2" - Engagement range / unit coherency 3" - pile-in / consolidate 5" -…
An organizer for "Warhammer 40,000: Heroes of Black Reach", to quickly prepare a game. Pieces to print: - 1 Ork army carrier - 1 Space Marine army carrier - 4 stackable trays for upgrades - 1 card deck holder (which acts as a cap for the…
3D-Printable Warhammer Base Cutter for 40k & AoS Models Description: Elevate your Warhammer 40k and Age of Sigmar miniatures with our simple base cutter! Crafted specifically for the unique angled base prevalent in these model ranges,…
This is a Remix from 2 other Models. I needed a Box to transport my DnD Figure to the Gameplace without damage. I cant find good Models for that so i remixed this 2 models. The Box is from Whity :…
Dice box I designed to hold 125 16mm dice. Printed at 0.2 layer height, detect thin walls on and random seam placement. Recommend turning off cooling fan to prevent warping of the base layers as this will affect how well the dice fit…
A simple base adapter for older Warhammer The Old World, designed to have just enough clearance for models whether you want to glue them in or leave them swappable, this design uses 3mmx1.5mm magnets to keep your soldiers in ranks. This…
WHM-6R Warhammer for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • whm-6r9.stl…
Fancy 3inch Warhammer Combat Tool with a fantasy design. It measures 3inches, 2inches, 1inch, and 0.5inch.
Unofficial terrain footprint templates compatible with the Warhammer 40,000 11th Edition terrain rules. This project provides printable STL templates for the terrain area footprints specified in the official Warhammer 40,000 terrain…
This is a revamped model of an existing one, PLEASE like and download the rest of the parts from the original creator :d And for the ones that have halls of tera , download the ones from here so you can fit them all in one box…
Borrowed the handle from @soozafone's sword, and ended up with this. enable auto tree supports I printed mine for my kiddo, in Silk PLA I will likely make a larger version
Small, Large, and Flamer templates.
This is a game that is fun to play with others. It is similar to Warhammer 40000 for anybody who plays that. Leave any comments, concerns, idea or questions in the comments so I can improve this to its best. This game is based off of…
A simple base adapter for older Warhammer The Old World, designed to have just enough clearance for models whether you want to glue them in or leave them swappable, including an alternate design that uses 3mmx1.5mm magnets to keep your…
It is a 3D model of a traditional warhammer's head.
Objective Marker for Warhammmer 40k And AoS 40mm center cutout 3inch outline around 40mm cutout lines spaced 1 inches from center
'There she is. Forged in fire by the smiths of Pipplemop, commissioned by the sage Lord of the Wozzinjay Fiefdom in the Realm of the Snargly Fruzmigbubbins.' Here's my test of the Warhammer of Zillyhoo. I made this long time ago, to print…
I'm not happy with the box the “Munchkin” cardgames come with, so I made this box with a slide on lid, that locks in place with a big nut. Optimised for 3D printing and does not require any supports. I added a lid with “Munchkin Warhammer…
After my first Game i made these simple coins for easier tracking. So why not share it here. Maybe its also helpful for you ^^ Have fun Printing
Card box for Warhammer Underworlds
Description: Enhance your Warhammer 40k miniatures with our collection of standard pill-shaped bases, for use with a limited range of models. Inspired by alannahk's original round bases and method for magnet mounts distribution, this…
Warhammer Underworlds transport system Features: Up to 3 warbands with magnetized bases including 3 decks and everything needed to play can be transported safely and clearly in the original packaging. The box has 2 feet and can therefore…
A warhammer for dummy 13. For minimal supports, orient handle-up.
Resizing will be needed Slice if needed Enable Supports 15% Infill or more Photo above is a slightly modified of the original provided and with a small support failure Not a Functioning Radio*
I was looking for a good way to store my Kill Team and made this model. It is compatible with with both 40mm and 32mm bases. Both base sizes are compatible with each other due to having the same size dovetail. I used 6x3mm magnets but 6x2…