Counting matching models…
Da ich das Sprührohr meiner WD40-Dose verlegt habe, musste schnell ein neues her. Vorhandene Modelle habe ich ausprobiert, aber sie haben leider nicht gepasst. Das Sprührohr ist ca. 80mm lang und hat einen Innendurchmesser von 1,5mm, der…
Cup-holder style WD40 holder for the famous honeycomb storage wall. It's for the 100ml bottle (Diameter 45mm) What is needed? 1x print fille ‘WD40_Bottle_Holder’ 1x ‘insert-empty’ (from original Honeycomp Storage Wall ) How to print? very…
Simple holder with multiboard inspired designs to cut down on plastic used. Uses 2 push fits on the back, which requires these snaps:…
I've often managed to lose the straw for the WD40. That's why I created a clip that definitely got rid of this problem. Hopefully it will help you too :-)
Holder/s for WD40, 3DLac and other sprays. Inner diameter optimized for 65 or 53 mm sprays. 3mf and bgcode for 1 or 3 pieces. Any number of pieces can be made. It is also possible to achieve a different diameter by adjusting the scale.…
This holder is to hold my WD40-Sprays 2 Ways can on to my HSW wall. But it will also hold any can or object that is 65mm wide or smaller. There are files to support HSW Mounts using full hex snap Multiboard Snap Multiboard Stud Model also…
The source marked this model as adult content.
Replacement cap for 400ml WD40 or similar containers. "clic" and it's in place ! If this becomes too hard to remove, slightly scale it up finely (like ~0.1-1%). Recommended settings \_/ Ø 0.4 Layer height 0.2 Perimeters 2 Infill Bottom &…
I designed this because my car was flooded. The mounting part made by Ficik is great design, also really easy to print. I sugest printing it in transparent filament, to know when watter is sucked out of carpet. No supports needed.
Use 2x M4 screws on backside. No supports needed.
I made two types of connectors, which work with Karcher vacuum cleaners - WD2, WD3, WD4 familly etc : for 40mm spiral pipe - with “left” thread - with “right” tread for 50mm pipe: - straight simple version (for non-spiral pipes) - blank…
Extend your reach and eliminate tangled hoses with this custom adapter! This is a robust, 3D-printed extension hose adapter designed specifically for Karcher WD3, WD4 , and compatible wet/dry vacuum cleaners. It replicates the original…
WD40 staw holder 200ml can
Nozzle 0.4 Resolution 0.2 Support YES Raft NO
You need to use support for the bottom of upper hexagon, ideally tree (manual). Use original empty inserts. Hexagons are very tight, but I used superglue - better be safe. 260509 - added holder for 45mm cans, with slightly reduced…
67mm Version of the wonderful T clip version by @DJ_Designs that fits the WD40 can
Simple, compact clip in scraw holder for the 80ml WD40 cans. Sick of having the straw across the cap taking up tons of room. I used the same clip style as the lid but mounted it vertically against the can.
A holder that holds a 100ml WD40 bottle. Printed in PLA with 5% infill.
If you like my design you can support me on BuyMeACoffee - https://www.buymeacoffee.com/kaushikbm -------- A very frustrating thing of WD40 smaller packs is that it doesn't have a proper holder for the straw they give along with. At least…
Držák pro spreje (vytvořeno pro WD40), možné využít pro podobný průměr základny. Vnitřní průměr 68 mm, vnější průměr a šířka 74 mm, výška držáku 65 mm.
I designed a WD40 can holder (diameter 54 mm) that can be mounted on a wall. It consists of two parts - bottom and top. Each part has a 3mm hole for countersunk screws. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…
One 2x2 Bin for two 100ml WD40 Spray Cans and 8 spray nozzles. The diameter of one can is ~45,5mm and spray nozzles 3mm
no supports needed updates coming soon WARNING: DO NOT POINT TOWARDS FACE
I created a holder for the WD40 200ml for the skadis wall. Support is required for the hooks. Print settings: Infill: 15% gyroid Layer height: 0,2 mm Filament: Prusament PETG
Can Holder for Küpper Pegboard 45mm Spacing For Cans up to 53mm in diameter, for example WD40 Use 2xM4 Screws to mount
Support à poser ou à pendre au mur pour un spray Ballistol ou WD40 avec son tuyau
A small mont for a small bottle of WD 40
It really holds on good but also easy to remove too!
Spray can holder, i use it for WD40. Internal diameter 70mm Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30%
Helpful clip for the 100ml WD40 can. Original with the 200ml + 400ml sizes by Pastelka here: https://www.printables.com
A simple holder for the Pipe of the Kärcher WD4. I used 3,0x35 screws
A WD40 bottle with a hidden compartment. You can unscrew the top to open it. I printed it with the mmu3 on my core one. The resolution with the 0,4mm nozzle is not high enough, so the white text is not completely clear, but its readable.
Anelli di supporto cannuccia per Lubrificante WD40 da 200ml. https://amzn.eu/d/evoFrvv
I designed that holder in order to place the WD40 in the IKEA enclosure, PETG used for the printing but also PLA it ll work properly.
Made for the smaller cans with ca. 57,5mm I diameter
One of the most usefull tools needs a place ;)
Wer kennt es nicht man braucht ein Tropfen WD40 an einer schwer zugänglichen Stelle. Einfach auf die Fläche sprühen und schon rutscht es zur Spitze und kann dann schmieren ohne das alles voll gesprüht wird.
A spray can holder designed for WD-40 (or 5-56) spray cans.
Can holder for sprays like WD40/Caramba 70 with a diameter of 54mm File can be modified easily on Tinkercad https://www.tinkercad.com/things/2HKaNcxkSUg-caramba-70-wd40-derivate-holder Category: 3D Printer Accessories
Spray can holder, i use it for WD40. Internal diameter 70mm Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30%
Custom-designed WD-40 holder for IKEA Skådis. Made to fit a 150 ml WD-40 can — practical and compact design.
This is a nozzle that converts from a female Schrader nozzle into a WD40 compatible adapter if the WD40 can has run out of air but still has solvent. Print Settings: 100% INFILL! (The nozzle needs to handle pressure, so there are no air…
f3d files included for remixes! I hadn't properly maintained my printer in a while, so when I was cleaning my garage and found a can of air, boy was I relieved! only thing is, there was no cap or straw to be seen. I did some quick…
![[HSW/Multiboard] WD40 Can holder](https://media.printables.com/media/prints/887802/images/6799869_e9efe165-f9a4-40db-8f7e-be92c721f7b6_dde06572-525b-4eb3-908d-d63e5754e247/img_0925.jpeg)
