Counting matching models…
This vase balances the curves and rectangles. It was printed using my spool rotator ( https://www.printables.com/model/523118-spool-rotator ) using Amolen tri-color co-extruded filament. The colors progress as a spiral around the vase -…
Modeled the Tree in Blender and the Base in Onshape. Its pretty hard to print because of its complexity and size. Ive attempted to print it several times but wasnt 100% sucessful. I added the tree print file of my attempt. The pictures…
Use-case and motivation for this part Yes, I admit that this may be the most senseless 3D printable part from an economical point view. But I love to reverse engineer unknown threads. So I could not resist to come up with this design for…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Both pots are designed to set 4 inch diameter by 3 inch tall thin plastic pots into. My prints: 100% scale 0.4mm nozzle and line width with 2 line wall count 0.2mm resolution 10% cubic infill No supports Filament: Overture Matte Gray PLA
Inspired by the various toroidal versions floating around, I wanted to make one myself, and swept the blades back 30 degrees... It came out pretty well, and cuts water nicely. sized for a "4 mm flexible drive shaft" that has M4 thread on…
As a passionate vinyl collector, I naturally clean my records wet. It all started with a Knosti. In the long run, something more professional was needed. But since I didn't want to spend €500 or more on a more or less overpriced wet…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I couldn't quite find a shoe rack I liked, that both had capacity and was out of the way enough so as to not be a nuisance, so I designed these brackets and picked up some hardwood from a local shop. I've included both the 100 degree…
Case for wireless build of Ferris Sweep Half Swept that lets you snaps the halves together and drop it in your pocket. It consists of the bottom case, middle plate and a controller cover. Controller cover is placed higher to leave space…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Good for a closer, non-perpendicular fit.
forward swept-wing airplane Category: Sculptures
Lost or broke original one? You will need 2x, M4x12 (ISO7045/DIN7985) screws to mount it. DIN912 or ISO4762 should be fine too. Design is optimized up to 0.35 mm layer height, and up to 0.6 mm nozzle.
This model is compatible with the lego system.
This model is compatible with the lego system.
Case has indentations on the bottom for 8mm rubber feet, but would also work without them. Tried to make it as slim as I could, so the thickness of the plastic between the bottom of the contacts the bottom of the case is 0.5mm. Also has a…
Der Adapter ermöglicht den Weller Lötkolben WEP 70 der Weller Lötstation WE 1010 in meinem Wabeco-Bohrständer mit einer Ø43mm Euronorm-Aufnahme zu montieren, um damit Einschmelz-Gewindebuchsen in 3D-Druckteilen zu platzieren.
I have designed two 3D-printed models to create a simple connection between the drill stand from Dremel (model name 220) and the soldering iron WEP 70 (station WE1010) from Weller. The main goal is to enable the vertical insertion of…
Bases for Imperial Assault Weadons engineer miniature characters. They allow a base 25mm by 50mm oval and 3.5 mm high to slide in. There is a tab at the back to secure the miniature in place. There are number indicators in the form of…
This model is compatible with the lego system.
This is a fairly accurate reference model of Weller's WEP 70 Soldering Iron . It is not intended to be printed. I often find that when designing a part that interfaces with another item, it is best to start by modeling the other item…
Remixed this clip to fit my LowePro Stealth Reporter D300 AW camera bag. Might fit other LowePro's bags too. Print with as many walls as it needs to get the bending parts be walls only. I printed mine with 3 walls (on 0.6n), so for 0.4n 4…
A lightweight stand allows for placing the soldering iron holder on top of the WEP 898BD soldering station. Fits the stock soldering iron stand. May also fit other WEP, ATTEN or Yihua soldering stations with a similar chassis…
This model is compatible with the lego system.
This model is compatible with the lego system.
Printables.com name plate for your desk
battlebot weapon test for vertical spinner
What do you get when you combine this model, an 80mm M8-1.25 bolt, a Weller WEP Soldering Iron , a Dremel 220-01 WorkStation , and some Threaded Heat Set Inserts ? A Threaded Heat Set Insert Press!
Boom-mounted tail wing with a Fixed, Swept wing configuration, this drone model can be used for war gaming, board games, dioramas, or general artwork. Note: Model has not been tested for aerospace physics principles, so is not currently…
The plastic part which is pushing the soap-bag breaks easily. This is a sparepart. Beim Wepa 331100 brechen leicht die Seitenflügel des Kunststoffteiles, das auf den Seifenbeutelkopf drückt. Print instructions Category: Replacement Parts
I remixed the plate to move the power socket to the one side, resized to fit belkow power soctek and added mounts for 5 way WAGO 221 for power distribution. https://www.amazon.co.uk/dp/B098K32L4B?psc=1&ref=ppx_yo2ov_dt_b_product_details
Simple tealight holder with a swept design, bets fitted with an electric tealight Fits up to a 40mm diameter tealight
Print as in with supports on. Preferably in PET-G or ABS, PLA might be too stiff. Mount with double sided tape or two wood screws (3mm). In the photo it's the V1, V2 includes better clearance and clips for the included nozzles, 2 mounted…
My Lowepro sling bag (LP141) has a long armpit strap that hangs in the way when it's not in use. Tucking it in was a pain and unreliable, so I made a keeper buckle based on the existing buckle design with changes to improve printability…
ZEPHYR A woman with closed eyes faces the wind. Her hair streams back in long sculpted locks that break into shards at the tips, her shoulder peels away into torn fragments, and the rest of her body swirls down in a zig-zag of flakes to…
Slight mod to the part to increase strength of the holes, Brush arm assembly completed, used brass bushes and 4mm axels.
I have modified the cable emtry hole with a slot so i can pass 4 way connectors through
Sweep Pen Pot - Swept Profile Desk Organiser A minimalist and modern pen pot with a swept-profile design, perfect for organising your workspace while adding a splash of personality. Ideal for pens, pencils, and other small items. ✏…
Pencil Grip to use for WEP 926 Soldering Iron. e.g. for SMD work, etc... Hold Soldering Iron like a pencil allowing a higher level of control. SMD work, etc... DANGER!! Make sure the Soldering Iron is cool DANGER!! Make sure you use High…
WEP937D front switch for rocker switch hole 13x19,2mm
Replacement piece for a Wepa Topitec Automatic Mixer since the mixer is no longer supported. Highly doubt anyone will need this, but it's here for posterity. Printed out of PETG, was used at an old job for >3 years. Image is not my model,…
Made a ver.2 from the ground up on account of the ver.1 having a minor issue of causing severe rectal pains in a certain group of people, who made it very clear how they felt about it in the comments. I appreciate the input and letting me…
Mount this to the left side of your WEP 2009D II Rework Station using the original screws and you'll have a nifty place to store your nozzles. I printed mine with polycarbonate, but any rigid filament will do. Have fun!
Chest Strap Buckle Clip for Lowepro ProTactic Backpacks This is a small clip designed for Lowepro ProTactic backpacks that secures the sternum strap when it’s not in use. Instead of dangling loosely, the strap clips neatly into this…
a simple wepklin water flosser holder that has a hole that can be used for a screw or double face tape it has holes in the bottom to avoid water accumulation
put springs in and then point and pull trigger
just a random faux site i mixed up to suit the ontos.. dosnt work just for looks.
A simple lamp cover with beveled edge to prevent accidentally turning on the lamp when not wanted. For DWEPTU LED Desk Lamp I superglued the two pieces together-
Sirocco is a one-piece sculptural vase shaped as if a steady wind had moved through it. The centerline bends gently in two directions, the oval body turns as it rises, and the opening finishes in a continuous swept crown instead of a…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is the Strange Bird SB29 RC wing ideal for FPV. Features: Air Frame weight (no battery): 350 grams Wing Span: 29.1 inches (740 mm) Steerable Nose Wheel DJI Camera Platform 3D printed Motor Mounts, including Wheels and Tires (TPU)…
