Counting matching models…
Hello, Today I have a Door stop for you. It works well and holds doors or windows really well. Ideal when it is drafty. I used PLA/PETG Basic as the material No need to use supports If you are interested in my work, the links are here:…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
This is my version of a Window Stop. It works very well :) Second Version is thicker: 7mm thick arms each side and rounded corner :) Print instructions I print it with 15% infill, PETG
Inspired from existing "Stoppy Stoppy" stopper available in the market.
I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…
Print approx. €6.24–€7.62 excl. taxPreliminary estimate for one variant
Cat & mouse door/window corner
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
Hier findet Ihr ein Modell eines 3-teiligen Luftkanals um den Schlauch einer mobilen Klimaanlage mit Außendurchmesser 150mm besser als mit der originalen Halterung an einem Dachfenster befestigen zu können. Der Kanal ist insgesamt 38cm…
Print approx. €12.45–€15.22 excl. taxPreliminary estimate for PETGSource material: PET
The Halloween decoration can be printed in a single color or, as in my example, in two colors. To achieve this, I paused the print before the final layers (the “Happy Halloween” lettering) and changed the filament color. - Die…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
Simple basic dollhouse window model fitting a 5 by 6 cm windowsill. A perfect addition to a model house, or a play set. If there are any questions, happy to answer in the comments.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
Bracket for attaching a movable window sill to a window. This allows the window to be opened without removing items from the window sill. A wooden board is required, which is screwed between the two bracket angles. The design was inspired…
Print approx. €10.61–€12.97 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
You can print sashes that provide 1 over 1 or 4 over 1 dollhouse windows. The flat springs on the sides of the sashes keep them in place after movement. I successfully printed everything without support. Install each sash by placing one…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Void's case, just compatible with Typeractive's wireless 6 column MX Corne PCB layout.
Print approx. €6.60–€8.07 excl. taxPreliminary estimate for one variant
Print from PETG, ABS or other heat resistant material. For this piece use clear see through filament because of the LED. Original switch part number: 61318365300.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Bill of materials: PETG filament 12 M3x16 (or M3x14) screws mosquito net TPU filament (optional) superglue 2 magnets : 6x3mm Assembly instructions print the parts: assembly the rectangle frame using 4 bars and 4 corners, that snap…
Print approx. €10.83–€13.24 excl. taxPreliminary estimate for one variant
Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…
Thing to join the chain of blinds. It's necessary to glue with superglue. The last photo is the original broken thing. Věc na spojení řetízku žaluzií. Je nutné lepit sekundovým lepidlem. Poslední fotka je původní rozbitá věc.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
A snowflake which can be attached to a window with a suction cup.
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
This is a modular, parameterized, snap-fit rod system for a Venetian window blind rod. Modular snap-fit These are the parts that you can use to make your window blind rod: Hook end: The top of this part connects to the hook on your…
Fresh air scoop for piper aircraft like Cherokee or similar. borrowed from thing verse.
Print approx. €18.69–€22.84 excl. taxPreliminary estimate for PETGSource material: PET
This is the enclosure for smart window blinds I designed. They cost approx. $6 per window and work with both Alexa and Apple Homekit. Unfortunately, I am unable to upload all necessary files here. If you are interested in this project…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Students create different prototypes of a bird feeder and discuss their models and printed results. Students combine 3D printed parts with wood, plexiglas and plastic trash.
Window handle repair set
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
Town token in Spirit Island board game.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Die Ersatzteile für die "Roto" Dachfenster werden schon seit einigen Jahren nicht mehr produziert. Der Kunststoff der Original-Schließplatte hat sich in nunmehr 30 Jahren fast aufgelöst und ist sehr spröde geworden. Um nicht das gesamte…
Print approx. €6.88–€8.41 excl. taxPreliminary estimate for PETGSource material: PET
Print using supports. The flame can be printed and then glued onto the body.
Tento držák truhlíku s květinami na plastové okno vydrží i velký vichr a vaše truhlíky z okna nespadnou - tisk PETG na MK4, 0.4 tryska, vrstva 0.2 Držák se montuje zasunutím do originální spáry pod okením rámem anení tak nutné žádné…
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for PETGSource material: PET
Window ventilation hole cover. Designed for original Vekra windows. Printed from PETG, but as it is designed for outdoor, ASA would be better.
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
I printed it with PLA at 0.2mm layers, normal 2p (infill N/A, but set to 15%). Remixed parametric remote holder by Egil Kvaleberg (2016) https://www.thingiverse.com/thing:1818365.
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
You want to use the IKEA smart blinds but have no chance to mount them by drilling holes? You could use KLAMBY to clamp them to your windows. But then the blinds will block your windows from opening. With this magnetic mount you can…
a simple fan duct designed for 120mm computer fans. This housing allows for ventilation through narrow slot type windows often found in high rise buildings. This is a great tool for removing smoke or fumes in a building with slot type…
Print with supports, PETG material for greater strength, 0.2mm layer height. No complaints for two years. The blue one in the picture is my holder, which is similar.
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET
Simple window hook for MEAT. For hook buy in Makro: LINK Print instructions PLA infill 30%
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
The factory clips for holding the screen/blind together consistently fall-out. This clip is design to securely connect to the screen while allowing a quick disconnect to the screen. PETG, 0.3mm layer height works great. Not tested with…
Commonly failing plastic components in motorhome window blinds can be a persistent issue. This repair kit provides a durable, 3D printable solution to replace worn or broken parts, restoring full functionality to your blind system.…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
The door trim makes the sensor body too far away from the actual door, so the solution is to put this spacer under the magnet which mounts to the door. Designed to match the same shape as the HomeSeer HS-DS100+ Z-Wave Door / Window Sensor…
recommended printing on ASA filament, of course PLA or PETG is fine
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
I could not find a vendor selling these bits, the screens are quite old. the plastic of the clips holding the screen in place have all deteriorated. I used PLA but it's probably better to use a more weather resistant or a bit more…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
The Easter decoration can be printed in a single color or, as in my example, in two colors. To achieve this, I paused the print before the final layers (the “Happy Easter” lettering) and changed the filament color. - Die Oster-Dekoration…
Print approx. €2.41–€2.94 excl. taxPreliminary estimate for PETGSource material: PET
This is the cover for the lower hinge. You can find the matching cover for the upper hinge here . You may need to mirror it in the slicer, depending on whether the door is hinged on the left or right.
Retrofit of window regulator 6205-25-016821P, used for WV / Audi. Printed mine in PTEG with supports, although the supports can be tricky to remove inside the small gap. Clips easily onto frame and was easy to mount correct. Included the…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Side cover to the window roller blind
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
What? The windows on the oldest Playmobil Western Houses like 3421, 3422, 3423, 3424, 3425, 3426, 3427, 3428, and 3430 sometimes break. These two piece allow for repair. 3D-print I print it with organic supports on build plate, though it…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
This box was designed to be 90mm deep (the depth of the windowsill, and 100mm high (the height of the basic black plastic pots the plants come in. Built as a request from my wife to stop the pots leaking onto the windowsill, and to give…
Print approx. €16.99–€20.76 excl. taxPreliminary estimate for one variant
Replacement in case you break the tab off like I did Designed for: https://shop.homeseer.com/products/z-wave-door-window-sensor HomeSeer HS-DS100+ Z-Wave Door / Window Sensor
Sunshade (window shutters) crank holder bracket, however, this is also s general bracket/holder for a stick of approx 16mm in diameter.
Transform your windows into a scene from a horror movie with these eerie reaching hands! Watch as trick-or-treaters do a double-take when they spot these haunting silhouettes pressed against your glass, creating the unsettling illusion of…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
In the 3ds Game: “Tomodachi Life” when a Mii is in love this icon shows up in their window! I've made 2 other models so far which I've put into a collection so check that out! Also I have been using an Ender 3 Pro for this so I don't know…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
This is a hook to mount Gateways, routers, switch, …. on a 30mm thick Windowsill. I printed it in white PLA a while ago, still works fine for me.
I printed the prototype with PETG.
For the winter. Removes snow and ice that doesn't stick to fingers. -Na zimu. Odstraní sníh a led, který nejde na prsty.
Print approx. €4.51–€5.51 excl. taxPreliminary estimate for one variant
Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
On my window the support was broken. I made a spare part to make it functional again.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Die Ausladung beträgt ca. 80 mm. Die Befestigung erfolgt mit Powerstrips Large, die Fläche ist dafür 45 x 25 mm groß. Die nicht klebende…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Printer Enclosure Window Mount Summary This thing/printable is effectively the other side of the printer enclosure ventilation system. Its effectively a modular mounting plate that can be used to mount the existing modular lock in…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
I couldn't find a French window handgrip which uses screws to mount it. I use the original screws. Uses two screws with a diameter of 3 mm. Supports: Yes Printer: Creality Ender 3 Infill: 20% Filament: Aurapol PLA White
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
This model is like the other one I have made but this time it's the problem icon! I've been using an Ender 3 Pro to print these (I know it's kinda old to some of you) so be cautious when you print this I'm guessing it'll work with other…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Print in PLA or PETG, so far I printed in PTA but still need to see with time if it handles properly. I used infill 30% and supports
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Edit 27. 12. 2023 Now you can also print a napkin holder with these gnomes! https://www.printables.com/cs/model/695300-napnik-holder-with-gnome Edit 10. 12. 2023 Thank you so much for all the downloads! I was so happy for the first 100 in…
A Nintendo Joycon grip with front-looking windows for the LEDs. It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º…
18 Snowflakes with approx. 50 x 50 x 2 mm for Christmas decoration. Put your favorite snow flakes on your window, gifts or decorate your Christmas table. 09.12.2025: Added two more snowflakes See also my original snowflake collection with…
EDIT 02.03.2026: Added an alternative version with grip grooves, which can provide improved grip in certain door and flooring combinations. The Flex-Hex-Hook is a compact, flexible door and window stopper optimized for TPU printing. The…
Can be used horizontically or vertically. works with 100mm tubes.
A vent to mount onto a window with a 100mm air duct adaptor. It can either be ‘hung’ from an airing window, or placed horizontally in a standard window. The vent area is ~62 cm², which is close to the adaptor/hose area of ~65 cm² (worst…
Update: anbei der Modellink zu thinkercad . Besonders in diesem Sommer hatte ich einige Update- und Remixanfragen zum Modell. Ich will das Modell mit euch teilen, fühlt euch frei es für eure Zwecke zu optimieren. Damit lässt sich die…
Use it to anchor a door or window in any position. It uses a clamp-like mechanism. Screw the bolt to make a friction with a perpendicular to the door surface. A door can still be fully closed with a mounted stopper on it. Just unscrew the…
Air conditioner exhaust into the ventilation window. Výdech klimatizace do okna ventilace. Category: Household
Air Scoop – Fresh Air for Cars Without A/C Stay cool on warm drives without air conditioning. This Air Scoop mounts securely to your partially open window and channels fresh outside air directly towards the driver. It uses a cap that…
Ventilation system for 3D printer. Easy to hook to the top of opened window and connect to 100mm aluminium hose. Works greatly with QIDI plus 4 printer. Suggestion is to remove inside filter in the chamber, connect 100mm aluminium hose to…
Tired of the wind slamming your PVC windows shut or swinging them wide open? This 3D Printed Window Keeper is a simple, highly functional wedge designed to sit securely near the hinge mechanism, keeping your window perfectly propped at a…
The model uses interlocking boards and a vent. The interlock is an angled dove tail that will provide a very tight seal (more air tight than the typical window seal kit). The interlocks are modeled with no clearance. You will likely need…
Window defrost dash vent VW passat b5/5.5 (golf IV), Audi B5/A4/A3 (8p1). Seat (leon/toledo),….. (only modeled, untested. Sorry) driver's side the passenger side must be mirrored Print instructions Unassociated tags: audi a3, b5.5, golf 4…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Spare holder of the chain. For chain balls diameter 3mm. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: No Resolution: 0.15 Filament: Filament-PM PET-G
Eine kleine Hilfe um Fenster bei durchzug offen zu halten. Zur Aufbewahrung einfach am Henkel befestigen oder an einem Nagel aufhängen. Gedruckt habe ich den Fensterstopper in TPU damit er elastisch ist. A little help to keep windows open…
Update August 2026 Finally put down the time to improve on this design. I managed to increase the output surface area keeping in mind of the restrictions of my current window. The slot is the same height but now 20 cm wide. Please double…
DE (EN see below): Einfaches Klicksystem um 150mm Klimaschläuche an einer Durchführung im Fenster oder einer Tür zu befestigen. Funktioniert sowohl für harte PVC-Schläuche als auch weiche Soft-Schläuche (z.b. Kaltluft-Ansaugung). Das…
Window for a dollhouse Print instructions Kompletní okno je tvořené z 3 částí . 2x ram-vnitrni-venkovni.3mf a 1x okno-110x60.3mf . Pokud v doménu nechcete vnitřní díl stačí vám jen 1x od každého . Je to rozdělené kvůli snaží…
Simple window stopper that prevents unwanted windows closing.
Christmas Tree Window/Door Sign 2 Sign/decoration in the shape of a christmas tree for example, the door/front door or window. Dimensions: 132 x 170 x 4 mm --- Weihnachtsbaum-Fenster-/Türschild 2 Schild/Dekoration in Form eines…
A variation on my general commander deckbox design with but with a slot for a clear toploader. it will hold 100 double sleeved cards. Note: These parts have a nominal interlocking clearance of .10mm. This fit is intentionally a little…
A small and cute window feeder for small birds. You can always watch the birds from home thanks to the window mount. With 2 parts, you can customize the color of the feeder yourself as you like and this makes printing easy (no supports…
https://www.buymeacoffee.com/maxt ---------------------- 3D print with 5 different houses that can be placed in a window. You have the possibility to change the houses and rotate them in whatever way you please. The houses can also…
This print is designed to be printed in two parts, one part either painted or printed in black filament, and then superglued together. I did this so I could print this on my single-filament printer, since I don't own multiple filament…
Ames Window is an optical illusion. When the window rotates around on a string, it appears to oscillate side to side. for more info on how it works check out the video below. I decided to make this after watching this Veritasium video: I…
A bird feeder which is mounted to a window using suction cups. As you very likely don't have the exact same suction cups as I used, I also uploaded the Fusion 360 file. The required values can easily be changed with Fusions parameters…
no supports needed if you print with a brim and square side down. tricky but works 100% infill best brim 18+wall count freecad file included
The shape helps to keep the stopper in place, even if the window is moving due to wind. It can be used symmetrically. I printed it in Armadillo TPU (https://ninjatek.com/shop/armadillo), a very hard TPU, but I think any material can be…
Background I recently got a xTool S1 laser machine and was looking for a solution to get rid of the exhaust gases to have the machine run in my flat. Idea I checked the most common resources on the web and found some window exhaust…
This is inspired by the Window Decor created by MaxT . You can find the original window decors here: MaxT's Christmas Window Decor . My window silhouettes are the two houses with garages and the Christmas Tree with the Gazebo. Updated on…
Update March 3, 2024: The discs at this link are 2mm (original ones I posted are just over 3mm) and should not stick out as far. I have not tried these since mine fit just fine in my AMS. If anyone else does, please let me know how they…
First, I want to say thanks and give big credit to Matthew , who made the original model . This is exactly the case I have been thinking about doing but never had time to make. This version doesn't need the window to be printed in place.…
A set of stamps for polymer clay and creativity. The usual size is 10-15 mm for printing with a nozzle of 0.4 or 0.2. With the ability to scale only X and Y for a larger size. There are 18 stamps in the set
Sometimes you will lose or break a connector in your window blind chain. This simple project will fix it so you can enjoy a working blind chain again. It is designed for chains made of balls with diameter of 3,0-3,5mm.
Version/Generation 2 of my Car Window Surfboard Project, FLYBOARD 2.0
Ich habe bei diesem Trichter für die Nachfüllung von Twindos Kartuschen den Einfüllstuzen (Rohr) um 10mm verlängert. Grund dafür war, beim Original (vielen vielen Dank an Phill Ament für dieses ausgezeichnete Design) drückte es mir beim…
Land Rover Discovery 2 window switch cover. There are two versions - with or without heating switch holes. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Supports: No Resolution: 0.2
Important: You need to Print in save materials like ABS, PETG or PLA to avoid harming your fish! (at your own risk) Immerse your fish pets in a majestic underwater kingdom with the Fish Tank Castle featuring swim-through windows and…
![Air Duct Window Vent [r.4]](https://media.printables.com/media/prints/7b76bdf0-c1e5-4156-b510-bb3d0fd1fa5a/images/10171299_74288e78-5b67-42f2-bd07-d947e7bf40cc_5b25485a-2bff-4670-907c-d16bb9518486/air_duct_100mm_window_exhaust_-_duct_adaptor_2025-jul-06_05-16-24pm-000_customizedview14193478432.png)
![Finger Surfboard Car Window Finger Surfboard [FlyBoard 2.0]](https://media.printables.com/media/prints/254313/images/2284043_47913e3e-d6ae-4469-a6ff-410d4baf53a0/finalcadphoto1.jpg)
