Counting matching models…
Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
English below 2 Möglichkeiten zur Überprüfung des Flows: Hinweis: Wenn Du größere oder kleinere Würfel bevorzugst, skaliere sie bitte mit deinem Slicer auf die von dir bevorzugte Größe. 1. Möglichkeit zur Berechnung des Flows: Wähle…
Designed for Ender3v2 to mount behind the LCD screen. I would imagine this works with other Ender 3s but I cannot confirm You'll want to use supports for the rails If you're looking for a mount to go in middle to replace the drawer, see…
Calibration cube to test 3D printers. New V2 version included some fixes that stiffens overhang test, makes it easier to read the overhang angle and some more. Calibration Cube All-in-One Included: Letters to identify axis Calibration…
This is a mixer tool for mixing. It prints without supports, the hexagonal handle has a standard 1/4 size and attaches directly to your electric drill. Diameter = 40mm Head height = 40mm Hex handle Length = 160mm
a Nozzle Holder that fits inside a 40x40 Aluminium V Slot extrusion. Common on many Printers, in my case its an Ender 3 Pro Fits 18 Nozzles and Usually you can Fit 2 of these on your printer, or 4 if you don't mind putting them on the…
This is a remix of CG-Tech's excellent extruder stepper motor cooling fan add-on on Thingiverse. EDIT: I've uploaded a second version with deflected air ducts, based on CG-Tech's alternative one. It was a quick bodge and the stl file is…
Layer height: 0.15 Initial Layer Height: 0.4 How to get great quality: Legs and arms must be printed vertically (Be careful to not F*ck up with Z axis) Slow the printing process (I did on 120mm/s) Tree support is a must 10% infill 65°…
Wenn das Ende eines Kabelkanals sichtbar bleibt, ist das unschön. Ich fand leider nur ein 3D-Modell eines Halters für die 60x40 Kabelkanäle, aber habe es mit OpenSCAD quick&dirty um eine Blende erweitert, diese gedruckt und teile nun hier…
Collection of screws (ISO 4017 / DIN 933) including : M4x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
Vytvořil jsem kalibrační kostku o rozměrech 40x40x40mm všechny hrany kromě těch co leží na podložce mají zaoblené hrany
Mersedes Benz E55 W211
Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 12 platform_width = 400…
Collection of screws (ISO 4762 / DIN 912) including : M6x 6, 8, 12, 16, 20, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
The endcap is held by a middle pin into the profile. The small standoffs prevent rotation. There are 5 Versions since different extrusion brands also have different hole sizes: with a pin for a 5mm hole with a pin for a 5.5mm hole with a…
Wenn mal kein Winkel da ist einfach kurz drucken…. Für Item Profile 40x40 (4040) und Nut 8mnm
Aluminum Profile End Cap - 40x40 [mm] Plain This is an end cap designed to cover the ends of the standard aluminum profiles that come with the Creality Ender-3 Pro 3D printer. This version is intended for use with the 40x40 [mm] aluminum…
Aluminium profile cover 40x40 (N8I) with good fit. Useful to cover the sharp edges and keep off dust.
Mersedes Benz G63 AMG
About The most common sizes (length × width) are 600 × 400 mm and 400 × 300 mm, which can be stacked together to fill a Euro-pallet measuring 1200 × 800 mm. This model is 1:10 scale.
Collection of screws (ISO 10642 / DIN 7991) including : M4x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
remixed internal dim's H=21mm L=60mm W=40mm
Case for Arduino UNO, CNC Shield and 60x60 or 40x40 fan (grbl).
Das Model kann beliebig im Slicer auf Z vergrößert werden. Z=100% hat dann ein 40x40 Profil mit der Z länge: 1mm Z=200% →Z länge 2mm … Z=?00% → Z länge von ?mm ------ The model can be enlarged to Z as desired in the slicer. Z=100% then…
You'll need four M5x12 and eight M3x6 for the linear rail block (M3x8 might work too, not sure) To install it, partially screw in the screw into the hex nut (use the stock ones) to lift the nut, and place the mount over the rail block…
I printed the parts with Prusament PETG (PLA works just as well). The sides I printed with .15 layer height to get clean holes. For the rest I choose .2 layer height. The pins could be inserted as an anti rotation lock. The side to side…
Prints fast and with not much material. Holds enough silica to maintain a single spool
-Holes changed from 8mm to 6mm -Countersink for countersunk head screws added -Added reinforcements for the screw insertion
Test cubes 20x20x20, 30x30x30, 40x40x40, 50x50x50.
designed for the ender 3v2 but should fit any standard 40x40 extrusion. 3pcs required. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20 Filament: PLA+ Notes: nozzle temp - 205 bed…
Depending on what you want to build this plastic one might replace metal original. Sides: 40mm x 40m x 40mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…
1U panel for 4 40x40mm fans I used M3 counter sunk screws and flansh heat inserst as the “nut” Compatible with LAB RAX
Mersedes Benz SL63 AMG
This 3D-printable cable tray is designed for effective cable management in DIY CNC electronics enclosures, workbenches, or general wiring setups. It features a compact design and easy-access slots for organized cable routing. Features: ✅…
A flat fan grill for noctua 40x40
a cube that will allow you to calibrate the printer for filament extrusion
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
A Nozzle Holder that that fits inside a 40x40 Aluminum V Slot extrusion. Common on many Printers ( Ender 3 + Clones ). I remixed this because I wanted a handle to be able to open the drawer easier, of course it HAD to be in the shape of…
Da ein User hier nach einem Alu Profil gefragt hat habe ich einfach mal eines gezeichnet und hier für euch hochgeladen. Ob sowas Sinn macht ist die Frage aber das dürft ihr selbst entscheiden. Das ganze im Slicer einfach auf die…
This is a remix of LordDenos original HSW Holder but with 70mm height
Holder for an Anycubic Vyper 3D printer or others with a 20x40mm aluminum profile. Also included are a tray and slots for USB / SD card / Mirco-SD. A holder for the PI-Cam is also included. The raspberry case is this one:…
Just a remix to use a 400x400 honeycomb cutting board from Sculpfun with the Atomstack S10 Pro to position your material at the real origo point. Had to edit the offset to fit the frame of the honeycomb. Now it is snap-fit to the…
Am besten mit TPU drucken, damit er fester in dem Rohr sitzt.
It would be nice if you post your make. Thank you
Mercedes amg project One 2022
Paint rack for Army Painter, Vallejo, Scale75 etc. Includes STL, DXF for laser, and F3D. Wall mounted. Suitable for 3D printer or laser cutter (mountings need to be 3d printed). Requires: 4x wall screws to mount, or 8 for an extra secure…
Its designed to be placed over a 4040 or 8040 extrusion and bolted on with 2 M8 screws. Feel free to ask any questions if theres something unclear.
diversos modelos todos d e 200mm, si necesitas una longitud diferente no dudes en pedirla.
This is a remix of Prusa i3 MK3S+ Extruder Stepper Cooler Add-on (for 40x40 Fan) by Strathpeffer3D with an added thread for a PC4-M10 pneumatic connector and updated for MK3S+. MK3S and MK3S+ have different FS-Cover slots (thx to HayaMini…
Easy to print. As an addon to my Euro Pallet https://www.printables.com/de/model/380553-euro-pallet-eur-1-epal-110-correct-sizes Normally they are stackable. This one is not. No support needed. No postprocessing. Have fun!
Is a remix of https://www.thingiverse.com/thing:4408571 . Fan duct for Creality CR-10 / Ender 3 printers with Micro Swiss Direct Drive Extruder. Suitable for 40x40x20 fans and BL-Touch. BL-Touch offset X=-46 Y=-9 The holes for the fans…
The screws needed are M5 x 0.8 screws. The profile is 40x40mm wide and the openings on the side are each 10mm wide. U can connect several units via M5 x 0.8 threadrods.
English (Deutsch weiter unten) A fan that fits into the Dometic Mini-Heki (40x40xm). Inside width: 382mm. Printing: Print in ASA or ABS only, for temperature stability. Required parts: 2x Corsair RS140 MAX 140mm ( Link ) 1x PWM Fan…
Da gibt es nicht viel zusagen. Die Bilder sprechen für sich. Es kann mit jedem Filament gedruckt werden. Der Winkel ist vielseitig einsetzt bar.
Endcaps for aluminiumsprofile 40x40, 40x80, 40x120 and 40x160
TMNT set Fortnite (Donatello, Michelangelo, Raphael,Leonardo)
Die Griffabdeckung passt auf Euroboxen von Alutec der Größe 60x40. Sie kann von innen in die Grifflöcher geclippt werden und hält durch kleine Überstände von selbst. Die Abdeckung hat eine kleine Griffleiste am oberen Ende, sodass man die…
Single hook fits aluminum frames with a 40 x 40 mm, 10 mm T-slot. The test lead folder is placed in the slot and then rotated to hold. It can be made without support if it is printed horizontally.
Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…
Brabus G900 Rocket Edition
Mercedes AMG GLE 63 Coupe 2022
Well I really like these "propeller style" cover so I've decided to print them... but then, I found on my CR-10 V3 that I have a problem. Simply put, when my printer auto homing X axis, it's in collision with arm cover. So I had to create…
Hello, this is an optimized very Strong Corner Bracket/Winkel for Aluminium Extrusion Profiles like ITEM in 40x40 size with holes for M6 Screws. I optimized the structur to have the strongest layer lines, how you can see in the pictures…
Customizable Sizes for Every Need My boxes come in a wide range of sizes to suit different needs. They are available from a compact size of 40x40x10 mm to a larger size of 150x150x150 mm. These boxes are provided with increments of 5mm,…
Mainboard / motherboard cover for Ender 3 v2 with 40x40x20mm (4020) fan. You can use a 4010 as well without printer risers. Fan mounting M4, cover mounting uses stock mounting holes and hardware. Supports are optional. Pictured white…
60x40mm Kabelkanal-Endkappe für "CK 60x40" Kabelkanäle.
Depending on what you want to build this plastic one might replace metal original. Sides: 40mm x 40m x 40mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…
Hinge prints vertical in place. Designed for 0.2mm layer height Opens 270°
This is the 40x40 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x20 mm versions.
Tiny version ( 40x40mm) of my slider
As said above a modified shroud made to fit three 40x10 fans. Low profile mount for the hot end for reduced air travel and sleeker look. Also vertically rotated nozzle cooling fans with a customized exhaust for optimal cooling (Aero…
Just a groove cover for 8020 or Bosch Rexroth profiles (40 x 40 mm, Type I, 8 mm groove). Of course you can scale the height to your needs. It fits quite firmly so it won't be bent or kicked out by thick cables. Print with infill.
The model is meant to be printed in TPU, but any material with some flex might work. I recommend using 6 shells, leaving the core at low density so the clip is a little more flexible as shown in the screenshot.
Angled mounts for 40x40mm aluminium profiles with 8mm T-slot.
I adapted the model to fit a 53x40mm Powerstrip
Aluminum Profile End Cap - 40x40 [mm] Adeptus Mechanicus This is an end cap designed to cover the ends of the standard aluminum profiles that come with the Creality Ender-3 Pro 3D printer. For this design I used kombatunit's "Adeptus…
Everybody hates loose caps, which are lost is seconds after installation. This cap has a screw, which needs a thread, but is secured for good.
I remixed this nut in order to only have a 5.0mm DIA hole which is then tapped to M6 thread to have a 100% plastic part. If you already have a tap kit available, and don't want any steel in your part, this could be a better option than…
Verbindungsdreieck 40x40 Aluprofile, Nut 8
Very strong case for Lexus RX400h, RX400, RX330. Uses transparent glue to securely hold the case together. I prefer glue because screws and nuts are not attractive for this kind, small detail. Case will not flex and very strong when…
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
End Cap Cover Solar Rail PV Profile For Profile 40x40mm (krytka na AL profil k solárním panelům). Profile is a bit lose to hold better on the end that was cut and is not clear.
PRUSA like - Raspberry PI 4 case with space for a 40x40 fan and a bracket to clamp the case to the frame of the PRUSA i3 MK3/S In mi case i used a 40x40x20 fan i had lying around (12V from embpaspt) connected to 5V for reduced noise, you…
Insration Need 2 or 3 peaces of M2x4mm self tap screw.
Anker 351 Surge Protector Power Strip Mount for Sim Lab 80x40 Aluminum Extrusion Profile. I designed this mount to perfectly fit the Anker 351 Surge Protector Power Strip on the back of my Sim Lab Freestanding Triple Vario Monitor Mount…
Rumour has it, these are Tarantinos favourite 3D-Printer feet. Not the most useful feet for your printer but a nice little gag. I spent way too many hours making these. I recommend using supports and sturdy outside walls and infill.
CLAMP HOLDER 80x350 CLAMP HOLDER 50x300 https://www.printables.com/cs/model/752981-clamp-holder CLAMP HOLDER 50x300 mm CLAMP HOLDER https://www.printables.com/cs/model/752981-clamp-holder-50x300-mm
None the boards that my daughter had were big enough for the designs she wanted to make so it was off to find something that would just about fill my printer bed. This is a 40x40 perler bead board. Print size is 205mmx205mm so fits on…
40x40 mm bracket for aluminium extrusions with M8 screws
Aluminium Profile 40x40 Corner Cap Used filament on photo : PETG Copper - 0.2 layer
simple cover for a aluminum profile
Aluminium Profile 40x40 Cap Used filament on photo : PETG Copper - 0.2 layer
The left front end cap (2 allen screws securing the mother board housing) seemed to make the most sense to me for placing the Raspi Cam. Being totally new to CAD and 3D printing, I couldn't find a suitable remix, so I decided to challenge…
Model not yest tested, still on development
![Aluminum Profile End Cap - 40x40 [mm] Plain](https://media.printables.com/media/prints/367740/images/3102560_7d9cc259-22cf-45cb-a2c9-5ba12728d2bf/large_display_40x40_plain_by_frappem_v4_367740.png)
![Aluminum Profile End Cap - 40x40 [mm] Adeptus Mechanicus](https://media.printables.com/media/prints/367739/images/3102558_45197d59-5a28-4bb8-98ce-fdd52bc30a9b/large_display_40x40_adeptus_mechanicus_by_frappem_v2_367739.png)
