Search results: x64

Sort order

Counting matching models…

P
PrintablesSten

Bezel for 0.96" 126x64 I2C OLED

This is a bezel with press pad for 0.96" 126x64 I2C OLEDs (about 25,3x26mm) that can be mounted “hole only” (5 holes) on a panel. M2 screws with washers and nuts are used for attachment.

Downloads
254
Likes
16
Rating
5
P
PrintablesCJ

64x64 Matrix Display Raster

The idea is to separate each pixel into it's own "box" this in combination with a diffuser sheet or transparent paper, gives a nice “boxed” effect for each of the 4096 led's. Beware you are not going to print the object, you are going to…

Downloads
54
Likes
4
Rating
0
P
Printablesmaximilliampere

Simple holder for 1.3 inch 128x64 OLED display module

The display module attaches on the front face with four M3x8 screws and nuts. M3x6 screws should also work, but may not get through the M3 nut all the way. I added space for four M6 nuts in the bottom of the holder to add some weight and…

Downloads
901
Likes
104
Rating
4.75
P
PrintablesITG Gear

Custom 3D bracket model file for XFX RX6400 on Lenovo M90q

Elevate your Lenovo M90q or P340 setup with this expertly designed custom 3D-printed bracket tailored for the XFX RX6400 GPU. This bracket ensures a perfect fit and robust durability, allowing for seamless installation of your GPU without…

Downloads
606
Likes
29
Rating
0
P
PrintablesXENOTPRO

Monochrome 1.3" 128x64 OLED Cover

This is a cover for the Monochrome 1.3" 128x64 OLED graphic display which can be found here: https://www.adafruit.com/product/938 Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0.1 - 0.2 Category: Electronics

Downloads
380
Likes
8
Rating
0
P
Printablesnlapenn

Adafruit 64x64 LED Matrix grids

64x64 LED Matrix Grid If you're printing yourself don't use this model!: This is is a really really slow path to printing these since slicers aren't optimized for grids like this. A better option is: Create a 192x192x6mm solid box (or…

Downloads
360
Likes
24
Rating
0
P
PrintablesTaki7o7

128x64 0.96" OLED Case - Snap-Fit

Just a case for a 128x64 0.96 inch OLED I2C/SPI You may want to clean it up a bit, but for me it fits perfectly off from the printer. The OLED Module i use is from AZ Delivery, but they just sell rebranded stuff, so it should be pretty…

Downloads
356
Likes
18
Rating
0
P
PrintablesPlowmanPlow

OLED I2C 128x64 Mounting Plate

This mounting plate is designed for a 128x64 OLED display prototype board. It was designed to fit the part on Amazon with the ID “B09T6SJBV5”. The Fusion 360 file has been included which should make it easier to work this into an existing…

Downloads
351
Likes
23
Rating
0
P
Printablestvdu29

Condom Case 3 PCS for 64x64 mm

Designed to hold 3 64x64mm sleeves condoms so they stay protected in your pocket I included my freecad original files if you want to modify or improve this model Printed at 0.3 layer height Have fun and stay safe !

Downloads
339
Likes
26
Rating
4.4
P
PrintablesJ-Verhaar

SSD1306 128x64 OLED Screen (Reference CAD Model)

This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…

Downloads
325
Likes
1
Rating
0
P
PrintablesLanMark

OLED 128x64 Case

Created this OLED case for the OLED 128x64 pixel screen. Pretty basic case with a cutout in the back to support the 4 pin header to pass through. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…

Downloads
300
Likes
15
Rating
5
P
PrintablesShadowChaser

Lenovo P330 Tiny RX6400 PCIe Bracket

This is a highly perforated PCIe bracket for an HP RX6400 that allows it to be used in a Lenovo P330 Tiny USFF system to replace the original Nvidia Quadro GPU. Theoretically any reference low profile RX6400 will also be compatible with…

Downloads
279
Likes
12
Rating
0
P
PrintablesAzom

A cabinet enclosure for 64x64 LED matrix (3mm pitch) with Adafruit controller.

A cabinet enclosure for 64x64 LED matrix (3mm pitch) with Adafruit controller. The enclosure is suitable for wall mounting. PLA-ST & organic support.

Downloads
234
Likes
21
Rating
0
P
PrintablesGeoff

Bezel for 0.96" 128x64 I2C OLED display module

These little OLED displays are super-useful. But mounting them into an enclosure means cutting a really neat rectangular hole, which I find slow & tiresome. This bezel holds the entire module on the outside of the enclosure, and fits with…

Downloads
199
Likes
13
Rating
0
P
PrintablesHawker

Mini PC Lid Vent - RX6400 RX6500 - Lenovo Dell HP SFF - M720q M710q M920q etc...

Use tin Snips to cut out the top of the lid and glue the overhang. I found a significant drop in CPU/GPU temp with the lid off vs on, having this vent should get the required result. The version you need for the Lenovo Mini is: 155x140

Downloads
188
Likes
21
Rating
0
P
Printablesthatweebaaron

PX640-LR44 Battery Adapter

Designed to adapt two 6x3mm magnets and an LR44 battery into the [XX]640 form factor. Make sure there is good contact between the magnet and battery, the adapter will not work if there is no continuity between the magnets and battery.…

Downloads
182
Likes
10
Rating
5
P
PrintablesJames

ZMK Nice Nano 128x64 OLED Dongle

Print as oriented in the model, I used ABS, but any filament should do. The tolerances are quite tight, so you may need to adjust scaling, but it fit up pretty nicely for me :) Requires soldering wires directly to the display/controller…

Downloads
181
Likes
22
Rating
5
P
PrintablesTomDD

128x64 OLED Box with Space for Rotary Encoder

Wanted a little breakout box with an OLED and rotary encoder so I could easily navigate and see which disk I had selected on the internally mounted FlashFloppy Gotek boards in my Amiga 500 & Atari ST, rather than use the file selector.…

Downloads
164
Likes
14
Rating
5
P
PrintablesSheac12

Small snap connect case for Adafruit 0.96" 128x64 OLED Graphic Display

This is a simple snap case for the Adafruit OLED Graphic Display (SSD1306) (.96") 128x64 character OLED display or any similar .96 display. The design is meant to be small/compact and snap closed. Only the standoffs are exposed. The case…

Downloads
156
Likes
6
Rating
0
P
PrintablesLeigh Williams

128X64 OLED Display

A simple holder for the 128X64 OLED Display 0.96 inch (I2C IIC SPI Serial) It has holes for m.2 kunrled inserts with a 3mm outer diameter. Print with 0.2mm layer height.…

Downloads
149
Likes
8
Rating
0
P
PrintablesAfterTen

LED Matrix Frame for 32x64 P5 LED Panel

I really like the look of these LED Matrix Panels. With the addition of the super simple Adafruit Matrix Portal interface board they are easy to program and display. But the backs of these panels are completely exposed and the Matrix…

Downloads
143
Likes
21
Rating
5
P
PrintablesHrumque

Frame for LED panel P3 64x64pix 192x192mm P3(2121)-32S-192x192-v8.1

Frame is divided to 5 parts: - (blue dark and light) 2 corners (you need at last 2 + 2 of it) - (pink and red) edge+side, for edge connecting every two panels, - (yellow) cross, for center connection (when you make more than one row of…

Downloads
136
Likes
15
Rating
0
P
PrintablesElElf

LED Matrix 64x64 housing

This is a housing for a 64x64 LED panel common on the elektronic market with enough space for powersupply and the IoT control unit. Here is used to display temperature and whirlpoolstate of a HotTub. The display is conrolled by a Raspian…

Downloads
119
Likes
9
Rating
0
P
Printables3Dms

Wemos oled 128x64

Caja de click para un Wemos D1 Mini y un OLED de 128x64 con un diseño simple pero efectivo para proteger ambos componentes y facilitar su conexión. Aquí tienes una descripción básica: La caja es lo suficientemente grande para alojar tanto…

Downloads
117
Likes
17
Rating
5
P
PrintablesGunbleR

128x64 OLED mount

angled under-shelf mount for 128x64 oled display. requires 2-sided tape to mount

Downloads
112
Likes
11
Rating
0
P
PrintablesAakaar Lab

Graphic lcd 128x64 rep_rap_discount display holder

This is rep_rap_discount display holder / case for diy 3d printer. The design is also fits for 2020 extrusion with a holder. Category: 3D Printer Parts

Downloads
111
Likes
5
Rating
0
P
Printablesn3kx

8x64 LED Matrix Enclosure

Model is designed to be printed as is with no additional supports needed. Only thing you need is 2pcs. of 3M screw about 1CM long. For box I recomend PLA any color you prefer and for lid I used clear PLA with very nice resoults.

Downloads
107
Likes
5
Rating
4.5
P
PrintablesDigitalUrban

Hub 75 RGB LED Matrix Panel 128x64 2.5mm pitch Joiner and Feet

Joiner brackets and feet for the Hub 75 RGB LED Matrix Panel 128x64 2.5mm pitch. Model ships with the Pimoroni Interstate 75 Starter Kit https://shop.pimoroni.com/products/interstate-75-w?variant=55006518411643

Downloads
103
Likes
9
Rating
0
P
Printablesnico

124x64 2.42" OLED + ESP32 D1 Mini Case

Case for 124x64 2.42" OLED display powered by ESP32 D1 Mini Use 2 mm screws.

Downloads
102
Likes
7
Rating
0
P
PrintablesAWSW

64x64 matrix holder

Simple 64x64 matrix holder with integrated open case for an ESP32 with some holes for wiring, cable ties and 3 wall hanger holes for nails or screws. Printing instructions: 0.3 draft profile No brim or supports used Steel Sheet used Happy…

Downloads
94
Likes
14
Rating
0

Multiboard Bolt Locked 4mm hex bit holder x64

The fit is a bit loose, but it makes picking out the bits easier. Don't worry, they won't fall off. Might have made the print higher which would stabilise the bits more, then again it would consume more material.

Downloads
85
Likes
10
Rating
0
P
PrintablesRnBck

Waveshare 64x64 LED Matrix & Raspberry Pi (2, 3, 4, Zero) Housing / Wallmount

Housing/Wallmount for Waveshare 64x64 LED-Matrix and Raspberry Pi/Zero The Waveshare LED-Matrix can be screwed to the Wallmount and covers the Raspberry Pi inside. You can either use Raspberry Pi 1, 2, 3, 4 or a Raspberry Pi Zero. On the…

Downloads
82
Likes
3
Rating
0
P
PrintablesJohn Turner

Matrix Panel HUB 75 2.5mm pitch 64x64 bracket

Here is my design for an inside corners bracket to secure 2 or more HUB 75 Matrix panels together. My panels came from Adafruit - they are from Waveshare I believe - Mine are 64x64 but they probably work on the 32 x 64 as well. I used 2…

Downloads
82
Likes
9
Rating
0
P
PrintablesBarbedWire

Adafruit 128x64 OLED Bonnet Pi Zero Case

Case for Adafruit 128x64 OLED Bonnet for Raspberry Pi on Pi Zero. There are versions that use 2.5mm threaded inserts and with modelled threads. In addition there are models that can attach 12mm x 2mm or smaller magnets so the case can be…

Downloads
81
Likes
12
Rating
5
P
Printablestonitom

Kenwood KAX643ME stand

Stand for Kenwood KAX643ME drum grater. For the attachment including adapter and the rasping drum.

Downloads
76
Likes
14
Rating
5
P
Printables1337hium

Oled Cover 128x64

Cover for the Oled display Category: Computer

Downloads
75
Likes
3
Rating
0
P
Printableschoovick

ZMK Dongle for 128X64 I2C OLED Display SSD1306 12864

Screen: 0.96 inch OLED IIC Serial White Blue OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board For Arduino For some reason its bit smaller compared to existing dongle cases, so had to create this one. Features: - Easy to…

Downloads
73
Likes
4
Rating
0
P
PrintablesAlex Henstra

LED matrix 64x64 P3

Case for LED matrix 64x64 P3 and ESP8266 (Lolin v3) Print Settings Printer: Custom CoreXY Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Jupiter PLA Clear Category: DIY

Downloads
72
Likes
0
Rating
0

CASE JMD0.96C. DISPLAY 128x64.

I design a compact case JMD0.96C. DISPLAY 128x64. It includes cutouts for pins. Be sure to have the same model otherwise it doesn't fit as well as you see in the picture. If you need help or you want to be printed this parts or customized…

Downloads
69
Likes
4
Rating
0
P
Printablesjaakaappi

64x64 P5 RGB LED Matrix frame and feet with Rasperry Pi standoff mount

A frame for two Adafruit 32x64 P5 RGB LED Matrices , controlled by the Adafruit RGB Matrix Hat . Wanted the frame to stand on it's own, so added two feet. The frame holes are M3 and Raspi standoff holes M2.5. Tolerances are a bit tight,…

Downloads
68
Likes
11
Rating
0
P
PrintablesDavid

Ammo holder for 7x64 fast reload

PETG 0.2mm layer height 4 walls 30% gyroid infill Tree support Printed verticaly on a textured PEI plate on a Bambulab P1S

Downloads
66
Likes
5
Rating
0
P
Printablestinyledmatrix

64x64 P2.5 LED Matrix minimal stand

Replaces the boot liner blanking plate with a light insert for additional area lighting in the car boot. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.2mm Infill: 10% Filament: Random China…

Downloads
60
Likes
1
Rating
0
P
PrintablesArmand

Modular Snap Together Raspberry PI4 128x64Oled Fan

This is a modified version of Sneaks' Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case with OLED and Fan options, available on printables.com ( https://www.printables.com/model/106225-modular-snap-together-raspberry-pi-2b3b3b4-case-w…

Downloads
53
Likes
3
Rating
0
P
PrintablesAakaar Lab

3D Printer 128x64 LCD holder for 20x40 Frame (Side only)

Hello friend Here is my another work simple LCD holder for side with preset angle for 2040 al frame. it uses M5 15 mm length bolt along with t nut for fixing.

Downloads
47
Likes
8
Rating
0
P
PrintablesTommi_nrw

Commodore SX64 bracket for 5.6 inch LCD Screen (AT056TN52)

Bracket for SX-64 monitor replacement. Fitting LCD & Controller: AT56TN52 & JD567M03 Two versions: Angled: This fitted perfectly into my SX-64 because my SX-64 is not right angled. Right angled: if "angled" doesn`t fit for you, you can…

Downloads
46
Likes
7
Rating
0
P
PrintablesJoerg B.

Tischständer für Waveshare RGB-Matrix-P2-64x64

Dies ist ein Tischständer für die Waveshare 64x64 RGB Matrix. Ich betreibe mein Display mit einem Interstate 75. Da gibt es aber auch 1000 andere Möglichkeiten. Deswegen ist die USB-Variante eine Option. zusätzliche Teile: 4 M3…

Downloads
45
Likes
5
Rating
0

CASE I2C OLED LCD 128X64 ROTARY ENCODER

CASE I2C OLED LCD 128X64 ROTARY ENCODER

Downloads
41
Likes
1
Rating
0
P
PrintablesMartin

Kenwood KAX643ME Drum Grater holder

Printed with PETG 0.2 layer heights, 0.4 nozzle and 5% infill. No supports required. Modeled with blender (source included)

Downloads
39
Likes
6
Rating
0
P
PrintablesLewis Stephens

FTX Carnage / Hooligan Nt / Zorro Nt Centre Spur Gear 50T FTX6424

Stripped the spur gear on my Nitro FTX Zorro so I recreated it to 3D Print. The dimensions are exact to the real spur gear, you may need to scale up the design in your slicer. I had to scale up by 1.5%, this is very important if you want…

Downloads
38
Likes
1
Rating
0
P
PrintablesKrzysztof Mazur

ZMK Nice Nano 128x64 OLED Dongle Xiao BLE remix

Remix of the wonderful model from @James_909973 There is some extra depth left so that the USB C connector goes in deeper into the case and doesn't stick out that much. If the slack annoys you, consider gluing the controller in place.…

Downloads
37
Likes
6
Rating
0
P
Printablesjhbruhn

P3 64x64 Stand with Vinyl Record Holder

As I am using my LED Matrix Panel as a display for cover art via HomeAssistant, I wanted a stand for these panels which can also hold the cover of any record I am playing right now. Also, I added some additional holes needed for my type…

Downloads
35
Likes
4
Rating
0
P
Printablesmidt

PiKVM case with optional OLED 128x64

Liked the PI-kvm v2 case , but had problems to fit the cables with heatsinks. Generated a H25 Top from Malolo's case and integrated the HDMI to CSI interface from PI-kvm v2 case and an OLED 128x64 cutout from PiKVM case (LCD+ATX) . You…

Downloads
33
Likes
2
Rating
0
P
PrintablesCrashoverride

PiRack - 128x64 OLED Bay

PiRack Bay for 128x64 OLED screens Expanding on rustlerustle's PiRack design, I've created a Bay that utilizes the 128x64 OLED screen. Notes Currently only for the raspberry pi 4, but will upload a version for the 3 soon. It's a tight fit…

Downloads
33
Likes
8
Rating
0
P
PrintablesAshley Laister

64x64 P3 HUB75 Matrix (192mm x 192mm) Housing

Summary This is a simple, straightforward housing for a 64x64 P3 HUB75 Matrix (192mm x 192mm) . I designed this to fit my own needs and wanted to share it in case it helps anyone else! Design Features Two Versions: Includes one version…

Downloads
30
Likes
3
Rating
0
P
PrintablesJosh G

Commodore SX64 Handle Hinge Cover

Replacement cover for the handle hinge on the Commodore SX64. I've had one missing on mine for a while so decided to model a replacement. Been a long time since I did 3D modelling so this isn't amazing but it at least works and fits nicely.

Downloads
30
Likes
2
Rating
0
P
Printablesn0coast

Matrix Portal 64x64 case

A simple case for 2 32x64 4mm pitch LED panels, and a Matrix Portal. Panels: https://www.adafruit.com/product/2278https://www.adafruit.com/product/2278 Matrix Portal:…

Downloads
29
Likes
0
Rating
0
P
Printablesmartin_pihrt

OLED 128x64 I2C to electricity distributor - rozvaděč

Držák OLED displeje 128x64 https://arduino-shop.cz/arduino/1569-iic-i2c-oled-display-0-96-128x64-bily.html?gclid=EAIaIQobChMIhrrl4pKn5wIVzzUrCh2_-w5yEAQYASABEgISxvD_BwE pro rozvaděč v krytce záslepky. Zabere v rozvaděči 2 pozice. Print…

Downloads
28
Likes
5
Rating
0
P
Printablessmeshoulam

(Remix) Prusa MK2 Mini 128x64 Display Mount (uses M3 heatsets)

A mount to attach a Mini 128x64 Display (either FYSETC or BigTreeTech) to a Prusa MK2 (or similar) Each of the two LCD Supporting pieces need two M3x6mm threaded inserts to be inserted. This has been updated since it was first uploaded.…

Downloads
28
Likes
7
Rating
0
P
PrintablesGetLifty

64X64 LED Panel ESP32 + Buck Converter Mount

This is a small bracket designed to hold a common ESP32 and buck converter onto the back of a 64x64 LED display. Ive been holding this model in my archvie for a while but have decided to release it in a usable state. The mounting holes…

Downloads
25
Likes
1
Rating
0
P
Printablesthenullray

2020 Extrusion Mounting Bracket for 64x64 P2 LED Panel

I needed to mount some 64x64 P2 LED panels I got from Aliexpress onto 2020 aluminum extrusion bars. I only have M4 T-nuts so this is designed for M4 T-Nuts but I could easily adapt this for M3 T-Nuts if needed. It is designed to hold the…

Downloads
24
Likes
3
Rating
0
P
PrintablesArmored Carbon

USBvalve case 128x64 screen

A case for the USB valve project using a Pico and the 128x64 screen. Everything is a press/snap fit. Printed with a .6 nozzle at .2 layer height in PLA

Downloads
22
Likes
2
Rating
0
P
Printablesbrass_ring

7X64mm Stacking Loading Block

7X64mm stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

Downloads
22
Likes
0
Rating
0
P
PrintablesAlex Oliva

SX64 Keyboard Cable - No tabs - smaller diameter cable holes

Remixed for this smaller diameter 25pin cable https://www.amazon.com/gp/product/B0026K9KGC Took out tabs from the DB25 and filled in the holes on the sides of the housings Print Settings Printer Brand: Creality Printer: CR10S PRO…

Downloads
21
Likes
1
Rating
0
P
PrintablesTomas Beran

oled128x64_096-esp8266-box

3D printable box for Wemos ESP8266 D1 mini and 128x64 0.96'' OLED display for Display: LaskaKit OLED display 128x64 0.96 I²C Wemos: WeMos D1 Mini Pro 16MB ESP8266 WiFi Module !!! Be careful !!! This model IS NOT for this display…

Downloads
20
Likes
2
Rating
0
P
PrintablesRene Berthold

Fox Stand with Cartridge 7x64

My wife shot her first fox and was eager to pick up the case in 7x64. So that it does not just stand in the display case, I have built a trophy where she can put the case. The bulge has the dimensions for a 7x64 cartridge case. Category:…

Downloads
20
Likes
5
Rating
0
P
PrintablesCartridge_Man
18+

The source marked this model as adult content.

Downloads
17
Likes
3
Rating
0
P
Printablesbrass_ring

7X64mm Vase Mode Stacking Loading Block

7X64mm Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes

Downloads
17
Likes
1
Rating
0
P
PrintablesMrMarco74

iDotMatrix 64x64 Pixel Skadis Display Holder

This is a relatively simpple designed Skadis Display Holder for an iDotMatrix 64x64 Programmable Pixel Art Display like this: https://de.aliexpress.com/item/1005007669717943.html I printed mine with a 0.6mm nozzle in 0.2mm resolution on…

Downloads
10
Likes
2
Rating
0
P
PrintablesNyein Chan Zaw

124x64 GUI Display Mount for 3D Printer (Aluminum Profile)

Direct Mount Design : Emphasize that it can be mounted directly on a standard aluminum profile (like 2020 or 2040 series), eliminating the need for extra brackets or hardware. Easy to Print : Mention that the model is simple and requires…

Downloads
9
Likes
0
Rating
0
P
PrintablesMr_Dan

AM8 - Vertical mount for LCD Screen Full Graphic 128x64

I have remixed the mount from Case for LCD Screen Full Graphic 128x64 multiple stand by Asphyth , thanks. I remixed to stand vertically. ORIGINAL POST DATE 29-MAY-2019 Print Settings Printer: AM8 - RatRig - MKS Gen L Rafts: Doesn't Matter…

Downloads
8
Likes
1
Rating
0
P
PrintablesEnver BAYRAM

Dishwasher_4600x640x830

Agriculture, Furniture, Interior design

Downloads
7
Likes
0
Rating
0
P
PrintablesCarol3d

1U-6IN-128x64 OLED-piB+

un remix de ce support a raspberry Pi 3/4/5 rack 6in avec un écran oled 128x64 remix de https://www.printables.com/model/1173903-raspberry-pi-2b3b4b5b-6-inch-rack-mount/remixes et…

Downloads
7
Likes
1
Rating
0
P
PrintablesKamanThings

Funnel for Acaia dosing cup and Mahlkönig X64 SD

grinding "funnel" (more like cone) for the 58mm Acaia dosing cup, when used with the Mahlkonig x64 SD grinder.. I much prefer my Acaia cup, over the one supplied by Mahlkönig. Print upright and with supports! Mine is printed with fine…

Downloads
6
Likes
0
Rating
0
P
PrintablesDark Mindset

Centralizador e Espaçador de Colmeia 645x645 mm para Sculpfun S30 Ultra

📖 Sobre o Projeto / Descrição Detalhada Quem utiliza a Sculpfun S30 Ultra (com sua ampla área de trabalho) junto a uma colmeia de corte de 645x645 mm sabe o transtorno que é manter a mesa colmeia perfeitamente alinhada e travada na…

Downloads
2
Likes
0
Rating
0
P
PrintablesRjun

AMD Radeon RX640 60mm Fan Mod

If you have one of these AMD Radeon RX640 4GB low profile GPUs you know that they get rather loud when gaming and also quite easily reach temperatures 80 to 90 degrees Celsius. I made this bracket to allow you to mount a 60mm 4-Pin PWM…

Downloads
2
Likes
2
Rating
0
P
Printables

Bezel for 0.96" 128x64 I2C OLED display module

These little OLED displays are super-useful. But mounting them into an enclosure means cutting a really neat rectangular hole, which I find slow & tiresome. This bezel holds the entire module on the outside of the enclosure, and fits with…

P
Printables

1U-6IN-128x64 OLED-piB+

un remix de ce support a raspberry Pi 3/4/5 rack 6in avec un écran oled 128x64 remix de https://www.printables.com/model/1173903-raspberry-pi-2b3b4b5b-6-inch-rack-mount/remixes et…

P
Printables

SSD1306 128x64 OLED Screen (Reference CAD Model)

This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…

P
Printables

Funnel for Acaia dosing cup and Mahlkönig X64 SD

grinding "funnel" (more like cone) for the 58mm Acaia dosing cup, when used with the Mahlkonig x64 SD grinder.. I much prefer my Acaia cup, over the one supplied by Mahlkönig. Print upright and with supports! Mine is printed with fine…

P
Printables

LED Matrix Frame for 32x64 P5 LED Panel

I really like the look of these LED Matrix Panels. With the addition of the super simple Adafruit Matrix Portal interface board they are easy to program and display. But the backs of these panels are completely exposed and the Matrix…

P
Printables

7X64mm, Recessed Spring Latch Modular Ammo Box

These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…

P
Printables

Hub75 Display Case for the Interstate75W, 32x64 4mm pitch display

Video: GitHub code at: https://github.com/digitalurban/Interstate75W_MQTT_Scroller

P
Printables

7X64mm, Spring Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…

P
Printables

7X64mm, Snap Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…

P
Printables

7X64mm, Double Spring Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…

P
Printables

7X64mm, Double Snap Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…

P
Printables

Snowflake Box (80x80x64 mm) for Christmas snowflake

Simple storage box, dimensions 80x80x64 mm for storing Christmas ornaments - "Christmas snowflake" (URL: https://www.printables.com/model/91455-christmas-snowflake ).

P
Printables

Simple Tote Tray 170x110x64mm

This trey is very nice for storing my stuff in my wooden drawers. But they are also nice a s general tote or tray. With this size you can print on a smaller printer with no supports. One Note : The sides are at a slight angle of 2°…

P
Printables

LED Matrix Frame for 32x64 P4 LED Panel (AdaBox 16)

This is a remix of my frame for the P5 panel. This frame is for a P4 Panel. It's fits the panel sent to Adafruit AdaBox members in box 16. https://www.adafruit.com/product/2278 I really like the look of these LED Matrix Panels. With the…

P
Printables

7X64mm, Pocket Spring Latch Modular Ammo Box

This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…

P
Printables

7X64mm, Pocket Snap Latch Modular Ammo Box

This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…

P
Printablesbrass_ring

7X64mm, Double Latch, PIP Hinge Modular Ammo Box

This version has these improved features: text for multicolor ramped hinge fixture for easier assembly either square or round dividers Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118…

Likes
0
Rating
0
P
Printables

7X64mm, Double Snap Latch, PIP Hinge Modular Ammo Box

The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…

P
Printablesbrass_ring

7X64mm, Double Spring/Snap Latch, PIP Hinge Modular Ammo Box

This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…

Likes
1
Rating
0
P
Printablesbrass_ring

7X64mm, Spring/Snap Latch, PIP Hinge Modular Ammo Box

This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…

Likes
0
Rating
0
P
Printables

7X64mm, Snap Latch, PIP Hinge Modular Ammo Box

The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…

P
Printablesbrass_ring

7X64mm, Recessed Spring Latch Modular Ammo Box

These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…

Likes
0
Rating
0
P
Printables

Sitting Fox Trophy 7x64 Cartridge

Another trophy where the cartridge case can be inserted. This time a sitting fox. Category: Sport & Outdoors