Counting matching models…
This modification reduced my board temperature from 65 to 40°C. The fan works at about 75% power. I still have an external power supply, I will deal with the control (thermostat, power supply) further. 0,4 nozzle 0,20 SPEED supports Power…
These brackets replace the standard units that mount the RMU to the MK3/S/+ variants. Due to the larger xBuddy case, more clearance is needed. The location of the RMU moves 15mm towards the rear of the printer. I made these for my MK3.5…
Cover for elBox - Bear Upgrade Prusa (i3) MK4S
Printed with PETG Prusament 20% infill
The MK3.9S/MK4S have a new Wi-Fi module which is thicker than the original. This means the RMU Buffer is too close to the xBuddy case. It needs to be just less than 1cm further away. The accelerometer socket is still accessible.
MK4S XBuddy Board cover sideplate to replace metal one. Allows xLCD cable (and others) to be routed more freely. After having trouble with my display, support told me to clear the xLCD cable from the other cables, having done so did not…
I have my mk4S in an enclosure and wanted to add some xbuddy box ventilation. I modeled a cover that accepts a 40mm fan. Works great, moves a gentile amount of air. I made mine out of petg. I think an ABS or ASA would be a bit better, but…
Replacement xBuddy electronics box cover for Prusa MK4 / MK4S, designed for a 40×40×20 mm 12 V 3-pin fan mounted on the top in exhaust configuration , improving airflow and electronics cooling. When printing ASA, this setup reduced the…
I've always found weird that the original cable holder of the main nextruder was tilted towards the frame, while the x-axis motor cable was towards the back. From the very moment I assembled my MK4 I thought it was an oversight and never…
Das originale Honigwaben-Design fand ich sehr schön und luftdurchlässig, so das ich es für einen 60mm Lüfter aus einer alten Grafikkarte modifiziert habe. Diese Abdeckung der Elektronikbox ( xBuddy Cover ) ist sehr passgenau. Dank an…
Made a small change to the model made by vhubbard to allow ducting of air to be easier in Original Prusa Enclosure due the frame of the enclosure being too high for a perpendicular ducting path. I slightly lengthened the main shroud that…
simple cover for the mk3s+ → mk3.5 upgrade. it is very hard to get all the cables in the box using the converters, hope this will give extra cooling and a bit more room on the bottom.
Printed at 0.25 layer height PETG, 20% lines infill
These files are part of my xBuddy cooling chimney: https://www.printables.com/model/1147850-xbuddy-cooling-chimney. In addition you also need to download @teslapunk's “link” and print it three times:…
BoxBuddy Is the ultimate edge reinforcement for cardboard boxes. Designed for box pros and loved by cats everywhere—because even they know a sturdy box is a happy box! Measure Your Cardboard Use a caliper to measure the thickness of your…
Remix of a Remix of a Remix..... See explanation below.. :)
Here are my modified parts from @Prusa Research and @Vincent for my xBuddy cooling chimney (https://www.printables.com/model/1147850-xbuddy-cooling-chimney).
I used the follwing coolingsystem from František Celler XBody Cover for my Prusa MK4s, because the Buddy Board was for my understanding to hot. I had up to 70 degrees at the Buddy Board. After i installed the coolingsystem the temperature…
I needed to connect a third-party fan to the FAN3 port on the Core ONE xBuddy motherboard but I was too scared of disassembling the printer too much. So I just replicated the lid and placed a hole in the middle
I have a clear wall on my enclosure, and I like the Prusa Research logo, and there was this huge black space with nothing... So I added the Prusa Research logo (70mm wide) You need to print the cover. I put a support under the big place…
Cover for elBox - Bear Upgrade Prusa (i3) MK4S
After some overheating issues — probably caused because I live in a very sunny country — I made this fan mount for an 80mm fan. filament = ASA allso It has holes for screws
Remix of a Remix of a Remix..... See explanation below.. :)
For my virtual printzer I just tried to rebuild the original xbuddy case. Tried to make it as accurate as possible.
All of my models are made in Tinkercad. I created this cooling chimney because I have only found models with both intake and exhaust at the bottom where you have to drill holes in the enclosure. Since hot air rises I made this model with…
After some overheating issues — probably caused because I live in a very sunny country — I made this fan mount for an 80mm fan. filament = ASA allso It has holes for screws
MK4 Kabel-Management für die Rückseite vom MK4 bessere Leitungsführung für die Verbindung zwischen den Bauteilen von links nach rechts. Look the pictures at this Parts from MK3:…
Curiously, the xBuddy cover screw holes are exactly 6 honeycombs apart. So, why not add an adapted HSW to the xBuddy Box to store the most frequently used tools? Structural integrity is not great when only mounted using the provided M3…
