Counting matching models…
This is a remix of https://www.thingiverse.com/thing:3501775 I take no credit for the design. Dexcom recently changed the size of the patches used, and the original design started causing me skin irritation. I simply cut the ends off of…
You can print it without support (!) and under 50g Filament.
This model is an XCOM: The Board Game insert that fits both the base and expansion games into the base box. If you've owned this game before, you'd know that is cardboard insert that comes with the game is terrible and doesn't even fit…
Some days you need to cover your CGM for safety, and some days you have special occasions and want to bling them out. I've printed these for both reasons and gifted a few to the kids I coach. This works in both PLA and PETG; it does need…
My Dexcom G6 Extractor tool I sell on etsy. The files are free on here for those with a 3d printer. Make sure your first layer is dialed in as the wings are very thin on not forgiving to printers not properly calibrated. Use 2x m3x6 to…
A CGM cover for dexcome G7. Use PETG to print it.
I am a klutz and can rarely get the over-patch aligned with my CGM. So, I made a guide. After applying the CGM: Remove the clear cover from the overpatch and place over the indented end of the guide. Fit the guide over the CGM. Push the…
I made an update to the CAD, to fix an issue with bridging the band, which I created inadvertently while making the change in size to the internal volume. I've also shortened the cap, as the smaller G6 module doesn't need as much padding…
I also added blank "slot cover" for helmet and standalone holder for V6 intercom for possible easy remixes for another helmet or intercom (or anything else :). Designed by hand measuring as precise as possible and tested on Nexx Vilitur…
This part came from Thingiverse. The holes have been closed and smoothed out. I print it with 20% infill at .30. However if you want it to be even smoother try the .20. I attached the Gcode if anyone wants. One of my friends from my FB…
There are now alternative versions available, with options for either only Dexcom or only Omnipod, and also for no tape at all. This organizer is made to fit up to.. 3x Dexcom G7 CGM Sensors 12x Omnipod 5 Pods 20x Skin Grip Dexcom G7 Tape…
Designed to fit a 3/4 inch Velcro strap. The inner portion rotates to align properly with your sensor. 0.5 mm clearance for the center insert. Load as single part and no supports. Sized to fit 3/4 inch Velcro "One Wrap" strapping…
I'm working on more space efficient and easy to access storage for my diabetes supplies than just leaving them in their boxes. This one is storage for the Dexcom G6 applicators. Each one holds 3 applicators. I printed it on an AnyCubic…
This is a simple clip in protector for a Dexcom G6 sensor. Press it in to insert it, pinch the tabs and pull it out to remove it. As the person who made the Dex Dummy( https://www.thingiverse.com/thing:1443431 ) said "You know where, for…
Adapter for Nexx X-Com 2 Intercom Slot (Helmet) to Standard SENA Intercom This adapter allows you to mount a standard SENA intercom to the dedicated Nexx X-Com 2 slot on your helmet. Designed for a secure fit using 2x M3 screws and 2x…
does not need supports nor a brim to print it.
A simple desktop stand for the Dexcom CGM Receiver that may be weighted. It is a smooth fit for me without gripping the receiver. The menu buttons remain usable while in the holder. I like having mine on my desk at work, but did not like…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
A box to store your Dexcom G7 Overpatches
Questa cover stampata in 3D con filamento FilaFlex 82A offre un equilibrio perfetto tra protezione, design e comfort. Ideale per chi cerca una soluzione durevole e personalizzabile per proteggere il proprio dispositivo, senza compromessi…
Remix of FurryWingNut's (Thingiverse) Dexcom G7 Sensor Storage Container. One file is a 3 sensor "middle" piece for stacking multiple rows of 3. The other file is a 9 sensor base tray. Also included FurryWingNut's original for simplicity.
Welcome, Commander. Shen has a gift for you, and it's waiting on your desk. It's a set of 6 coasters to save your desk from spills when Bradford's doing "Evasive" manoeuvres. .12 layer height 100% infill Skirt No Supports needed If you…
Dexcom G7 stencil. Use it to make patches out of adhesive dressing 0.4 nozzle 0.2 layer height thank you
support for the dexcom G6 blood glucose sensor. useful for doing sports and keeping your sensor safe. the model is designed to use a 20mm elastic(https://www.amazon.it/gp/product/B0B9B8YJGB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1).…
I made two variants because I didn't like how the straight variant looks on helmet so I made also an angled variant. With small nipple as a counterpart on intercom for satisfying click and retention. There is also a pocket for USB cable…
The Nexcom NDIS B533 is a fanless desktop great for digital signage (its original application), embedded applications needing a small silent system, PFsense and OPNsense routers, Raspberry Pi-like workloads, and so on. However it does not…
Case for Dexcom G7 Receiver Printed with Inland Translucent Blue TPU
I recently had to go on insulin and had to move to a CGM. The receiver is so small I needed a better way to keep track of it. So here we are. Model prints with no supports. Model has some tight clearances. Printed on SV06 plus .3mm…
Ladestation für Dexcom G7 mit Platz für Winkelstecker/-adapter. Durch den zweiteiligen Aufbau ist ein Druck ohne Stützen möglich. Die Teile werden mittels Schwalbenschanz verbunden. Bei 14.4mm empfehle ich eine Pause einzurichten, um den…
This 3D-printed tool is designed to help people with diabetes easily create their own adhesive patches for the Dexcom ONE glucose sensor. It may also be compatible with other glucose sensors that share a similar diameter. Included…
Dexcom G6 Receiver - Die Wandhalterung Wir brauchten eine Möglichkeit den Receiver nach oben zu hängen! Erstens damit unser Kind nicht immer dran geht. Zweitens das erhöht die Reichweite. Drittens zwischen Wohnzimmer und Schlafzimmer…
I created the original model in January for PLA and it worked well. A family member challenged me to make a phone style soft case. So, in February I started playing with TPU. I modified the original case, because it was working well, for…
I love the original model, but bones don't have polygons, and skulls are hollow so..... Pics are of a quick test print, no post work aside from support removal. Model looks good to go for a large format print as is, but I may add some…
A very simple design, in order to separate all components by role to have a faster setup. Print one of each file.
I used PETG (for 40mm rubber straps, like: https://shorturl.at/awnAQ )
cant wait for the lms with slasher
dusekkar head for fanbloxcompany figure
If you want a good gift to give to loved ones and you have diabetes you can give them this dexcom!
The Nexcom NDIS B533 is a fanless desktop great for digital signage (its original application), embedded applications needing a small silent system, PFsense and OPNsense routers, Raspberry Pi-like workloads, and so on. This stacker allows…
Added G6 template and G5 template for 75mm wide tape. Made a basic template to allow faster cutting of kinesio tape or similar medical tapes to fit over the dexcom g5 sensor, to keep the original tape from peeling off slowly. Print in any…
For Zaxcom RX200 battery doors that the screws threads have stripped. Two models, on has a rib along the back for added strength.
fat chicken boy from roblox
Use two cable-ties to mount your Dexcom G4 Continuous Glucose Monitor on your bike's handlebars. Category: Sport & Outdoors
ebross uploaded a very nice bust of a sectoid from the game XCOM2. I printed and painted it but it really needed a nice base. I designed one so I could show it off. Alien not included! Print Settings Printer Brand: Prusa Printer: i3 MK3…
To hold the lid shut, i used the tiny magnets from Dexcom G7 Sensor applicators but you can also get a bunch of 5 x 1.5 mm magnets on AliExpress. For the hinge bolts i used the threaded ends of 2 mm bicycle spokes. I mounted them by…
Chance Head For FanbloxCompany Figure. making the 2.0 head soon=]
A minimalist cover for an Eaton xComfort wireless light switch. Just use some Blu Tack, double sided tape or velcro to attach the switch and cover to any surface you wish.
Dexcom Continuous Glucose Monitor for toys and medical play. With and without text.
Jane Doe Head For FanbloxCompany Figure (fixed the bug where the hair doesnt print) (also fixed the bug where the hat doesnt print right)
Designed to fit a Pelican 1120 carry case to organize: Two Dexcom G7 sensors Two Cartridges, syringes, and infusion sets One vial of insulin To use, remove all of the foam with the exception of the thin bottom foam insert. This foam will…
A parent came to me asking if I could make a 3D printed case for her diabetic son that uses Nightscout and Motorola Moto G4 phone with the Dexcon G4 receiver. The two devices talk to each other through a usb cable and monitors blood…
Just simple model for wall mount a Maxcom MM42D SE. PETG - Infill 25% - 3 wall loops. - NO SUPPORTS NEEDED. It may fit to other devices with keyhole spacing 13,5cm (from the center of keyhole to keyhole).
Happy late halloween!
Flexible bumper case to protect the Dexcom One/One+ CGM receiver from falls, etc. Useful features Includes hanger loop to tie the receiver to whatever you wish (the original receiver does not have a place to tie a string to). Includes…
To hold the lid shut, i used the tiny magnets from Dexcom G7 Sensor applicators but you can also get a bunch of 5 x 1.5 mm magnets on AliExpress. For the hinge bolts i used the threaded ends of 2 mm bicycle spokes. I mounted them by…
Just simple model for wall mount a Maxcom MM42D SE. PETG - Infill 25% - 3 wall loops. - NO SUPPORTS NEEDED. It may fit to other devices with keyhole spacing 13,5cm (from the center of keyhole to keyhole).
This tray keeps 2 Dexcom G7 sensor boxes stored neatly side-by-side in a single tray, or the tray can be placed on top of 2 boxes to stack them upwards 2 at a time. There's no wrong way up, so just drop them in or stack it up and you're…
This mount is designed to securely attach a Lexin Intercom B4FM to a Nexx Y.100R or compatible Nexx helmet. It combines two existing designs into one refined solution, offering a snug and stable fit — no more unreliable clips or adhesive…
Dexcom G6 stencil. Use it to make patches out of adhesive dressing 0.4 nozzle 0.2 layer height thank you
made this for my son Dexcom g6 night stand organizer tray
I've included a couple of screenshots from Slic3r, in an attempt to demonstrate the most complicated feature to print in this model. The cut-away screenshot, shows three parallel lines, designed to be bridged. It may be necessary to run a…
So WILL4742's drop ship was PERFECT for my homebrew chapter, but less so for my Monoprice mini. So I took a bootleg copy of netfabb to the files and made them well smaller. I'll be posting a make as soon as I get around to actually…
This is a replica of the ADVENT logo from XCOM 2, created relatively quickly for fun in 123D Design. Included are a version with a base (to keep the parts together) and a version without a base (each part printed separately). All hail the…
Pas grand a choisi à dire. C'est historique que l'apparence ne traîne pas sur le bureau. Essayez de prendre des vues plus petites que le diamètre des trous pour ne pas fléchir le modèle ; avec deux petites rondelles, à passe bien. Ma 1ère…
