Counting matching models…
[Update] ---2025/01/21--- Ultra size cat released!! It is about twice as long as Extra size and looks like a dragon, so looong! This is a super long version of “Flexi Holding Cat” which was previously released. Since there were many…
I'm very excited to introduce you to the new and extra long Glorious Baby Dragon! Longer Dragon = more Fun! It has so many articulated parts, so amazing! Length: 93cm / 36,6Inch Luckily, I arranged the parts to use as little printing area…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . After much trial and error, I…
Also comes with a stand adapter on the back, should be easy enough to delete if it's not desired. ========== Added 200% version (remember to scale up) and stackable version for whatever reason ========== Added reinforced version to fix…
By popular demand, here's a really long version of the Articulated Snake with Scales. How long is it?!???? I don't know, I haven't printed it yet. :) Someone print this and let us know how long it is. I'm guessing it'll be close to 6'…
Designed to seamlessly integrate into your workshop, the clamp has a 35mm hole on both ends to suit a standard shop vacuum hose end. If you choose not to use the clamp, then I have included an adaptor to convert from flexi hose directly…
How to throw? : Grip the object exactly like a soda can and toss it just like a football, making sure the heavy ring points forward. Check out the example above for guidance. To get a smoother flight, snap your wrist gently as you let go…
************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…
Update: 26/04/2024: Added a STEP file as much requested. Kirby sucks So do fume extractors Its kinda a no brainer Almost entierly printed aside from the filter and fan Update 1: I forgot to mention, some models of fan will requite around…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
Yes I know, it's tempting to use a discarded PC fan as a solder fume extractor, but it usually doesn't do the job quite well. That is why I opted for an industrial fan with impressive specs. The Noctua NF-F12 industrial PPC-3000 PWM has…
💥 Pokémon Beads for Every Fan! 💥 Bring your favorite Pokémon everywhere with this fun set of Pokémon-themed beads ! Designed to slide onto cords, laces, or keychains, these adorable prints feature: ✔ Starter Trio: Pikachu ⚡, Squirtle 💦,…
This is my next dragon. A few of the other ones I made were not very flexible, so I made this one extra flexible. When printing on an a1 mini, you can make this 33 inches. I haven't tested this, so if you print a dragon max size on a…
This is my 2025 iteration of my multi color slide together Easter Eggs! But this time with an extra twist One has an extra color added and the other is one of my previous designs that now twists together instead of slides together! Here…
These are a copy of the MaxTrax MKII traction boards, for 1/10 scale crawlers. 145mm long X 42.5mm large X 6mm high. Comments and suggestions are welcome ! * UPDATE : I uploaded V2 which has the little traction losanges 0.28mm higher for…
Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…
The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…
The height of the lift table can be adjusted with the lower wheel, the angle with the middle wheel and the Fractal Vise can be tightened with the upper wheel. Print Settings & Quantity: I printed everything with a layer height of 0.2mm.…
please leave a review if you like this model and let me know if what you would like me to make next
Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…
A quick and simple remix, but one I just had to make after seeing the All-Terrain Assault Benchy. Now Dummy 13 can have shoulder-mounted cannons, too! Two versions: one with the 13 on the backpack, one without (there's a 13 on the cannons…
Update 2: Optimized design in CAD + Improved some structural rigidity. (23-06-2024) Thank you Annex Engineering for creating a very fine extruder in the beginning. Check them out: Sherpa Heavy All standard from the Sherpa Heavy…
Featured in 3Printr.com ! When soldering, it’s crucial to protect yourself from harmful fumes. That’s why I designed this fume extractor—not only to redirect fumes but to completely remove them from your workspace, ensuring clean air for…
See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…
Hello, This was definitely not my idea, but what was available didn't quite suite my needs so I completely redrew a set of my own with some upgrades and went a bit crazy haha! This design is based on 3x10mm round magnets (Amazon afilliate…
This is an insert / organizer for Earth, including the Kickstarter upgrades (wooden soil tokens, wooden leaves, wooden active player token, and calendar cards). It all fits in the base box, has no lid lift, supports premium sleeves on the…
A simple funnel. (Credit to my friend for printing these on his ender for the picture)
Here it is! A brand new extra long version for you: Dragon Axolotl V2 – 73 cm / ~28.7 inches long 🦎🐲 Longer Dragon = more Fun! It has so many articulated parts, so amazing! Features: 👀 Separated eyes version 🪽 winged version 🎨 colored 3MF…
This model is based on the fantastic Gridfinity Bin with Printable Label by Pred . This has quickly become my go-to bin for organizing my hardware. I found that these print great on a modern printer. On an older printer that is not as…
Print 4 of these to add a third table to the bottom of a lack enclosure, for additional height. I have lowered the overall height the legs will stand on by 12mm, and removed the slots for acrylic sheets from the original design. Print…
Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…
Remixed from the original pistachio opener on Thingiverse. I really loved using them, but wasn't sure what to do with my hands after cracking the shell open and trying to get the nut out with my fingers. Now the tweezers immediately grab…
*will update more in morning its 3am im going to bed Introducing the Models 302A and 302B mini fume extractors. A more serious alternative to my kirby fume extractor, these mini fume extractors are perfect for all your small project…
I organized my kitchen consumables drawer to make sense of all the mess using Gridfinity! I added dovetail lids to Gridfinity tubs, to allow for easy refilling of the ziplock and wrap containers. For the wrap containers, I designed them…
It makes it easier to remove the battery. Especially helpful if you're using gloves or after flying you don't have much feeling in your fingertips :-) Added version with a pocket clip. Makes it easily accessible and easier to organise in…
Some assembly required - Glue piece 1 on the bottom of the main body. USE ONLY A FEW DROPS ON THE PERIMETER, do not stick to the spring. Superglue/Cyanoacrylate works fine. Glue piece 2 onto piece 3 (There are a couple of divots to help…
Introduction Minimalistic solder fume extractor with 120mm fan and two active coal filters. Easily prints in three separate parts and slides together into a space efficient and sturdy package. The bottom is fastened with two countersunk…
I made this little clip for extra support for the original Side Spool Holder since without it it tends to bend after a couple weeks. Works with: https://www.printables.com/model/776235-ender-3-v3-seke-side-spool-holder-less-gantry-wobb…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
This is a simple soldering fume extractor. It uses an active carbon filter commonly found in hardware stores and used also in your kitchen fume hood or in cat toilets. The design is quite simple, no need for screws or anything else. All…
Build-able marble racing !!!!!! Saw an Upload from A.Fool for his own modded tile which led me to find this, Without A.Fools tile i wouldn't have seen this , for that reason i'm uploading it here for viability. All models here were…
All of the sensor offset mounts I could find were based on the original Elegoo CC design with 2 screws. Lots of people now have the one w/ a flap and 1 screw, including myself. So i made one. Only tool you need was provided w/ the…
Update 01Sep20 I have an alternative design of blast gate that may be better suited to extraction of larger chips and shavings. 63mm (2½") ball valve: print 137795 A 100mm (4") ball valve: print 137794 This is a 100mm (or 4 inch) version…
Designed to clip onto your existing disk guard. Stays in place with friction/clamping. Will fit most Milwaukee battery powered angle grinders (I use it on an M18 FSAG model). Keep in mind that even though my printed version has a strong…
The Super Spinning Top is designed to spin longer, smoother, and more satisfyingly than your average desk toy. Its wide base and low center of gravity reduce wobble, while a finely pointed tip minimizes friction for maximum rotation time.…
Later update: 03.september.2024 This is and Original model Based on the Klicky probe made by jlas1 all credits to his work for the macros and idea. and for the contributors. We have adapted his work to our design. Please if you like his…
Modified version of Allan's QIDI Plus4 foot to fit the Q2. This raises the Q2 1cm off your desk, and provides a wider base for stability. For my printer this increased stability and reduced vibrations. These may require more work, your…
A rigged Dice V3.0. Fully new Version with Sphere as Base Model, like a real Dice. 4 different versions: one without weight on a specific side (Rigged Dice V3.0 - hollow) one with a weight → so 6 gets rigged (Rigged Cube V3.0 - rigged)…
You can how ever download different versions from here if yo dont want a full size model https://www.thingiverse.com/thing:2423889 and https://www.thingiverse.com/thing:2437223 and https://www.thingiverse.com/thing:2442198 and…
This thin hexagonal chain maille consists of hexagonal tiles held together by little cuffs at the edges. It is very flexible in all directions. The tiles are 13mm across the flats and are only 1.8mm thick. Print using a 0.2mm layer height…
Use any floss at least 6" (150 mm) in length. Floss on the Go! Rip, Wrap, Snap, Floss! How to Wrap: Can be Re-used! 1pc Prints in 7 min. 6pc Print in 1 hr.
Update #1 I fixed the hooked top, so now the small sticks snap in properly, and I added a "candy" looking side panel. If the tolerance of the printer is not accurate enough, cut 0.2 mm from the top of the side panels. On the other hand,…
This model is inspired by Jake_of_all_Trades Pulley Extractor (https://www.thingiverse.com/thing:3593964) but with changes: fillets added (for removing failure point when using excessive force) chamfer added (removed sharp edges for…
Corner covers: Cover up the gap left from removing the hinges for a better chamber seal. No additional hardware required, just reuse the screws used to hold the original hinges in place. Magnetic Door Latch: Uses 2 8x3mm magnets to hold…
I wanted to design a fume extractor that had a rechargeable battery and had a modular design if you want to quickly swap filters and such. I also wanted it to have relatively simple electronics inside, so people with less advanced…
Another fume extractor. I looked at what was available and made my own. I took the idea of a slotted housing for the filter from another design and then built that and everything else around the fan body. Fitting the wiring into the…
Has the same size as the original hands. No supports needed.
Here comes the brand new spiky mountain dragon - extra long version🐲!!! This little buddy is very articulated and it's really a lot of fun to make him wiggle✨. Again you will get a separated eyes version and pre painted versions (bambu…
read the PDF manual for more details. but with these tools and instructions should it not be that hard to make your own extractor for the FGC9 platform. it also includes a section about clearing malfunctions
This is an enlarged version of my “Sturdy Soap and Shampoo Dish” with more room for shampoo bottles and soap bars. Inside dimensions: 156 x 76 x 22 mm. There are versions for 18, 20, 22, 25 and 28 mm shower rails. Assembly: Please follow…
An attachment to use with a shop vac with a 35mm nozzle (eg Kärcher, but possibly others), useful for wet cleaning carpet and upholstery. The attachment area is conical so it creates a snug fit. Print with 100% infill, this needs to be as…
The aim of the fume extractor is to have a device that is easy to build and requires as few extra components as possible. All parts should be able to be printed without support and be easy to assemble. Required Parts: 3D Printed: Base…
GIGGA SCRATCHA™: the Rolls-Royce of back scratchers. After trying plenty of back scratchers that were too short, too flimsy, too sharp, or just generally disappointing, I decided to make the one I actually wanted. The result is the Gigga…
Double Helix AAA Battery Holder - with optional extra compartment This is a fun little print that not only looks neat but holds up your AAA batterys. There are two different versions, one has some extra storage for batterys inside the…
Remix of "Cable Hook" from @oxy101 Thanks to the provided .step file I easily added an additional hole for greater "twisting resistance". I also added a chamfer to both holes to allow countersunk screws to sit flush. The distance between…
Edit of the original design to have a perfect fit for your average printer. hole on the arm is designed to fit a spru snipping. all i did was edit the size of the hole on the arm for better tolerances, after 2 test prints it fits perfect…
Hello! Here is my design of air filter/fume extractor for my enclosed or not printers! I designed it for these HEPA filters: https://fr.aliexpress.com/item/33037955841.html?spm=a2g0s.9042311.0.0.27426c37H91RYB And finally I decided to use…
Wanted something with extra storage to not waste space or filament so made large cutout and placed the caliper as low as possible to fit in slim drawers (total height including caliper 85mm). Bin is 1x6 (u) and 4(u) tall (31.8mm) Large…
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
Here you can download the drill hole extractor for an AEG vacuum cleaner. This sucks itself onto the wall so that you have both hands free for drilling. The original handle can be too heavy for this, so I have added a micro handle.
I finally took the time to tidy up my Predator file data base all of which were .PDO's that I have been collecting over the past several years. Unfortunately I cant give credit to the original designers because I no longer have access to…
I scaled up Chris Borge's fantastic Kirby fume extractor model to fit a 120mm fan! I modified the fan bay fit so no trimming should be required for a 120mm fan. Options are available for using screws or heat set inserts to secure the fan.…
Extractor fan designed for 120mm (x27mm) fan, suitable for plexiglass enclosures. SEE VIDEO HERE Filter section outside of enclosure, using standard 120mm Zortrax HEPA and Carbon filters. Fan section inside enclosure. In this case a…
A functional model of the extraocular muscles of the human eye. Anatomically accurate insertion angles result in realistic pulling actions of the muscles. Developed to aid in the teaching and learning of the extraocular muscles. Printing…
Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…
I LOVE this idea and the original model posted by PenolopyBulnick. I wanted a few extra features for my gingerbread children: -Jangly, loose, flexible joints with more range of motion (in the style of the flexi rex) -Rounded over edges to…
Models are in original scale.
Full set of couplers to add an additional lack table to the original lack enclosure. Print instructions Printer Brand: Prusa Printer: I3 MK3S Infill: 15% Filament: Prusa PETG
Mount four 3.5 inch hdd on a 140 mm fan mount. The extra 8 holes are for stability and works on Coolermaster Q300L and Q500L cases. Ender 3 v2 0.6 nozzle PETG Category: Computer
Marble Run 2 rescaled to 102%, with extra wall to avoid balls jump out and easier winder. For 8mm metal balls
Custom magazine extension for magazine GL9 magpul Glock 17 + 2 extra ammo. The product is made in such a way that no screws need to be used.
This is a tool less replacement adapter of the SSD caddy of the Atomos Ninja V. No screws or tools are needed in order to use your SSD with your Atomos. Also included is the clip (you have to print two of them) for the Smallrig 2209 cage…
20May20 Marius-Bloemhof requested the CAD files: ( https://cad.onshape.com/documents/5425e358a4e266ea950b034e/w/fb495421e309359b374e4475/e/07ed980bcf8592c544c8964f ) Update 24Aug20: I've posted a new design for a blast gate based on a…
Remixed from V1.1.1 Original design is epic - but the weird grip on the side and all the text felt really distracting for such a small case. Updated 2024/04/17 to add space for the screen - should help prevent cracking but no guarantees -…
ET EL EXTRATERRESTRE
UPDATE 17.09.2023. -Added 20 mm hook version -Making hook parametric so users can easily change laptop thickness and adjust it to their own needs This is extra strong VESA laptop holder designed to use advantages of printing parts in…
This print require to modify some slicer parameters, G-code for Prusa MK4 and MK3S+ is provided, if you need to slice this model for your printer please, follow the instructions step by step. More model variations and 70mm size coming…
When I bought my first car, it didn't come with a fuse extractor, so I modeled this one from a standard Skoda fuse extractor. Printed with 0.3mm nozzle and 0.15mm layer height, but you can go even lower if you wish. The print may not be…
Description The microSD card of the Bambu Lab X1 is a bit too deep inside the touchscreen; this tool eases extraction and insertion of the microSD card. I don't want to risk damaging the device by messing around with a sharp object or a…
I felt the design of the origional model relied a little too much on layer adhesion strenght, so I added a brace to connect the two mounting points. This should decreace the sheer forces between layers by redistributing this force as as a…
sprite extraction crate
Use this to mount AM4/AM5 cooler on your motherboard, if original bracket is missing. Version with 3mm extra beef has hook as large as it can typically fit. Can be a little challenging to install but offers maximum strength. +2mm version…
This set of wiper mounts for the Pastamatic Spool Winder has .25mm extra clearance for easier insertion/removal of the TPU wiper blades. It can also help compensate for any warp or flaws in the holder or wiper prints that prevent the…
I have scoured printables for the different lucky 13 hand gestures that have been made so far. this is primarily a repost to put all of them in one place. I'll continue to update this list as new ones come out. Each file is a pair of…
Not sure about the exact model. This fits perfectly in mine. Check the dimensions. Original is available and modifiable on OnShape at…
CDX Blocks Spare Parts with custom extra elements I designed in Fusion 360. You can print these Parts so the match your rollercoasters color. The easies way to adjust clutch power is to play around with flow rates, clutch depends a lot on…
This is the extra torso for the lego character Loyd from Ninjago. It was seen in the comics but was not available to buy. This can be printed with any color, also fitting the other characters. It can be painted on, as seen in some of the…
This is a parametric dust extractor designed with a small shop in mind! The included STLs are ready for a 45mm hose and mount to the dust bin via 6, 5mm bolts.
Print instructions Print settings supports - no , maybe a bit with the ball brim - no layer height - any (0.2mm is tested)
![[Official Remix] Flexi Extra Size Cat (Print-in-place)](https://media.printables.com/media/prints/1146999/images/8658584_808cb494-2549-4a42-b5ae-72f60e7726bc_9fdfc9b3-37cb-4725-a000-bcc358fe757e/extra-size-cat-1-2.jpg)
