Counting matching models…
Lexus car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Recommended print settings: Material: PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. As seen on Jelle Romers video: And article:…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
33mm x 36mm logo 68mm x 10mm word 6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
One engine plus five different train cars included in this simple print in place train set. All the cars print without supports with wheels and hooks that move right off the build plate. Examples printed at 0.2 mm layer height with 3…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
A take on the fractal vise utilizing flexures in place of the bearings for the rotations. I've got a running article on the various versions here , and the models for this one and V5 are on OnShape here . This rev is essentially just a…
Print approx. €7.74–€9.46 excl. taxPreliminary estimate for PETGSource material: PET
This is a valve stem cap for a Lexus. I made these to give as a fun gift to my son-in-law. You may need to print these with a brim. Color break is a 14.3. The pre-sliced file is for five caps.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Very strong case for Lexus RX400h, RX400, RX330. Uses transparent glue to securely hold the case together. I prefer glue because screws and nuts are not attractive for this kind, small detail. Case will not flex and very strong when…
Update: 2/17/2022: The interface between the lid and the seal is not very good currently. I am working on a better design. The challenge is around the TPU filament that I am using. It is 98A which is not very soft but is easier to print…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…
I really enjoy my Aixun T3A soldering station, but I would like it more if it was angled up more relative to where I'm sitting. So I designed this base to cradle the main unit and do just that. There are even provisions for rubber feet in…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
Save and easy to print. No support.
Held together with 3mm screws
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Prusaslicer settings: Setting up the “virtual" dual extruder: The “virtual” dual extruder is based on this post: https://forum.prusaprinters.org/forum/prusaslicer/manual-multicolor/ To setup the “virtual” dual extruder you have to follow…
A holder to keep your Perplexus Epic in place. May work for other sized Perplexus puzzles, but don't have any to test. It's sized to perfectly fit the Perplexus Epic. Shouldn't need any rafts or supports. 5-10% infill 0.15mm print…
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant
printed with PLA 20% infill and worked perfect without scratches
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Lexus lego & writing keychain that I made because I love cars
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
A four color hearts keychain/pendant. The hearts are slightly different heights to allow for the color changes on a single extruder printer. To get the ace flag print the colors in this order: Black, gray, white, purple. But you can…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A four color hearts keychain/pendant. The hearts are slightly different heights to allow for the color changes on a single extruder printer. To get the ace flag print the colors in this order: Black, gray, white, purple. But you can…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Pin Challenge on the Ultimaker 2+ with DXUv2 printhead. I needed to enable the Conical Start and halve the Sphere Speed Max to 250mm/min due to the Ultimaker 2 DXUv2 printhead with two hot nozzles and Labern fan shroud (axial fans) not…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Adapter rings for replacing your Nexus Pro barrel with 17/32 brass tubing. These spacers fit into the breech and front piece and allow you to use a brass barrel 6" or longer. For best results use some glue to ensure good bonding between…
Had this tablet laying around for years and I needed a dedicated device for quickly accessing PrusaConnect to queue up the next print.
Print approx. €4.66–€5.69 excl. taxPreliminary estimate for one variant
Lexus CT200h fuse box cover - power outlet fuse V2a - suit for bigger piggy back fuse
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Secure Apexi controller to spacer (feed cable through hole). Use 3M double sided tape.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
The attached 3D-printed architectural model exemplifies a modern, minimalistic design approach, showcasing a contemporary building complex with sleek, geometric forms. The primary structure is characterized by its rhythmic vertical fins,…
Print at 0.2 layer height and 100% infill. Thicker layers mean a stronger print. I used PLA, but you can use ABS or PETG if you would like. Print with the two O-ring end down and use supports.
Battery box for oldschool doorbell. For 1x flat 4.5 V or 4 x AA batteries (in battery box). Upper partition for separating + and - of flat battery. There is also a hanger for an Allen key BOM: 2x M3 square nuts (same as Prusa using) 2x M3…
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
Introduction: Electronic waste (e-waste) is a huge global problem, posing troubling environmental threats. Waste mobile phones are a big part of e-waste, mainly due to extreme demand & short product life-cycles. While older smartphone…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Model náhradního pantu pro box prachu.
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
I disliked the original position of the little pwm hub in my fractal torrent since I would have to cramp a lot of cables in the bottom left of the case, so I decided to mount it in the center, where one 3.5" HDD cage used to be. This is a…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
My Aixun soldering station came with a smart iron holder that has your run of the mill brass sponge in the front for cleaning your soldering iron tips. For me this did not cut it for cleaning so I designed a tray to hold a 55mm x 55mm…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
This model replaces the factory tray inside the storage box between the front seats. Glue the part “Rahmen” on top of the part “Tray”. Tray is best printed face down, so it doesn't need support. The lid(Deckel) is placed on top of the…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
This is a mini rack to contain an odroid and an SSD disk. PETG is recommended Note that this is designed with the the following case in mind: https://www.amazon.com/gp/product/B07L839LWN (3.7 x 2.83 x 1.22 inches) This should be…
Velice mne zaujal suchý box vyrobený z Tesco klipfresh foodsaver 5 L - https://www.printables.com/model/682467-filament-drybox-tesco-klipfresh ,do něj se vejdou dva kontejnery na silica gel -…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
Battery Cover for Mouse Nexus SM-9000C.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Vytištěno na Prusa MK3 a Raise 3D pro plus3 z PLA, výplň 15%. Spojeno 9k šroubek M3x10 + 9ks matiček M3.
Budu rád za Vaše případné komentáře :)
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Tactile image of asexual reproduction by regeneration using a starfish for example. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Tactile image of asexual reproduction by sporulation using a fungus for example. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Tactile image of asexual reproduction by laceration using a planarian for example. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Tactile image of asexual reproduction by vegetive propagation. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Tactile image of asexual reproduction by budding using a hydra for example. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Tactile image of asexual reproduction by binary fission. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate in…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Makes your gun shoot harder
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
ESP32 Matrixuhr nach S-huehn.de
Print approx. €10.02–€12.25 excl. taxPreliminary estimate for one variant
This model was featured on The 3D Printing Nerd Be sure and Check out this awesome video by 3D Chill with super clear assembly instructions ! We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 Inspired by benzz88's…
Introducing the FDM (Fixum Dude Motors) print in place Jeep. Based off of the K2_Kevin birthday model ( https://www.printables.com/model/516455-k2_kevin-birthday-model-2023 ). Find the entire FDM Collection of vehicles here:…
I've added a “New Angle” file for people having issues with the overhang in the underside of the bed on the top. Introducing the FDM (Fixum Dude Motors) print in place dump truck. The wheels rotate right off the build plate. There is a…
Introducing the FDM (Fixum Dude Motors) print in place police car. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
Introducing the FDM (Fixum Dude Motors) print in place garbage truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…
Introducing the FDM (Fixum Dude Motors) print in place concrete truck. The wheels and the concrete mixing drum rotate right off the build plate. V2 has newer stronger axles. Find the entire FDM Vehicle Collection here:…
Criminals, by nature, are a cowardly and superstitious lot. Drive them to justice with the FDM (Fixum Dude Motors) print in place Batmobile. Find the entire FDM Collection of vehicles here:…
Introducing the FDM (Fixum Dude Motors) print in place pickup truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…
Introducing the FDM (Fixum Dude Motors) print in place school bus. Version with or without the print-in-place stop sign available. Non-Stop Sign version recommended for very small children. Find the entire FDM Collection of vehicles here:…
Introducing the FDM (Fixum Dude Motors) print in place ambulance. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
Introducing the FDM (Fixum Dude Motors) print in place fire engine. The wheels rotate right off the build plate so you can respond to any emergency right away. Find the entire FDM Vehicle Collection here:…
NOTE: Models have been updated based on feedback. New models (V3) should have less side to side movement on the wheels and on the bed and slightly more range on the tilt of the bed. Also fixed a small issue with the front windshield…
Introducing the FDM (Fixum Dude Motors) print in place ice cream truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…
Introducing the FDM (Fixum Dude Motors) print in place VW Bus. Find the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315 Prints without supports. Samples are printed in PLA with 0.2 layer…
Introducing the FDM (Fixum Dude Motors) print in place racecar. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
The Nexus 70mm fan seems to be a pretty common cooling upgrade for the original Xbox. The stock fan is a proprietary 72-ish mm job that has a specific shape and these tabs that secure it into the back of the console. However there is no…
Just another vertical laptop stand... but this one has a flexible hinge at the bottom that adjusts to the thickness of your laptop. Nothing screams "I'm a maker" louder than this simple piece of 3D printed plastic. The thin layer in the…
Introducing the FDM (Fixum Dude Motors) print in place snowplow. The wheels rotate right off the build plate so you can clear the streets right away. Find the entire FDM Vehicle Collection here:…
Introducing the FDM (Fixum Dude Motors) print in place taxi cab. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
nexus · watering can and cup this design comes in two variants, watering can (with a handle) and a smaller watering cup, in a modern minimalist style important · make sure that: your filament is dry and calibrated so that it deals…
Introducing the hardtop version of the classic FDM (Fixum Dude Motors) print in place Jeep. Find the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315 Prints without supports. Sample printed…
Install instructions and the original launch video here:
Introducing the FDM (Fixum Dude Motors) print in place package delivery truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all…
Be sure to visit and welcome the newest member of the family: a heart-shaped unfolding box. (It's almost Valentine's Day) Take also a look at the sequel: Solid storage box with origami folding lids. updates moved to bottom of page.…
Introducing the FDM (Fixum Dude Motors) print in place Jeep Gladiator. Based off of the 2 Door Jeep Gladiator Concept Vehicle. Find the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315…
I designed this mold for casting a 10 by 10 cm and 20 cm high wallmounted contrete lamp. I added a version for reusing the casing and a version for onetime use only. To be honest, I never tried the reusable one, so if it sucks or doesn't…
There is a Toyota floor mat clip out there, but that was way too big so I decided to create my own model, dimensions should be close to a stock one. I would print this one laying on its side with some tree support and 100% infill.
Presenting the classic mail truck, inspired by a mod to my package delivery truck by MillCasaMakes on MakerWorld. New 4 color MMU version added for better quality of the logo and stripes. Four color Painted/MMU Bambu Studio Project added…
Start G-Code: M211 S0 ; disable travel limits G92 E0 ;reset extruder G28 ;home M420 S1 Z10 ;use bed mesh G1 Z10.0 F4000 move Z axis G1 X-10 Y20 Z10 F5000.0 ;move to start position G92 E0 ;zero the extruded length G1 F200 E10 ;extrude ooze…
Introducing the hardtop version of the FDM (Fixum Dude Motors) print in place Jeep Gladiator. Based off of the 2 Door Jeep Gladiator Concept Vehicle. For people who wanted the Gladiator, but also wanted a stronger model without the roll…
These combs are designed to be zip-tied or hot-glued to wire shelf decking, I'm sure they will fit into other spaces as well. I'm hoping the flexure makes them work decently for cat5e as well. Design considerations/quirks The outer…
This is an XY Translation stage that uses mutually compensating flexures to create "perfect" planar translational movement. In a perfect world, no rotation or Z-Movement would sneak in (but a little does). These stages have a +- 14mm…
For use with any other collet in the ecosystem (Xshot Longshot, Unicorn) Printable with no support, if the overhang is giving some problems, you can use some. This is functional with the stock barrel. The stock barrel measures (incase you…
So way back in the day I found the Pokebox Switch case by 3D Printing World (https://www.thingiverse.com/thing:3474587) and I remixed the top of that case to be an Ultra Ball. The BEST Pokeball. More recently I found their version that…
Bring the iconic presence of a luxury SUV to your collection with this 3D printable STL model of the Mercedes-Benz G63 AMG. This powerful and stylish replica is perfect for automotive enthusiasts looking to showcase rugged elegance and…
Included are custom FPS end caps for the Adventure Force Nexus Pro; previously sold on Etsy and now shared for free. Details EDIT: Newer batches of Nexus Pros appear to be using a slightly different spring supplier, so we now recommend a…
Car key/fob combinations are notorious for becoming brittle and failing. I scanned the fob internals and designed the case to use M3 SHCS and nuts. 0.2mm, PLA, Sovol SV01
Two simple stands for keeping Perplexus puzzles from rolling around. 110mm: Perplexus Go 165mm: Perplexus Rookie 175mm: Perplexus Original 200mm: Perplexus Epic I added felt pads to keep the ball from getting scratched, but this is not…
This simple holder fits all standard angle grinder discs - no matter if its 115, 125 or 230mm - all have central hole of 22,3mm. Print with 3-4 perimeters and 20-30% infill, as some disc can be pretty heavy. Screw into some wood with…
I forgot to adjust my print purge values before printing this so some of the red leached into the white. Remember to increase the purge value for the white colour if you use white as the base colour.
This is a remix of the stellar model by fixumdude inspired by the X-34 Landerspeeder Luke pilots in Episode IV. Added a few cutouts on the top panel of the speeder to allow for easier coloring. Printed and sliced on Bambuslicer using a…
Fully printed, no assembly, print-in-place fin ray grippers, printed with plain PETG, no TPU flexible filament needed. The connectors are compatible with fischertechnik. The grippers' angle is 16°, so that you can use two Winkelsteine 7.5…
Lexus KeyFob model Best made in petg and a solid print so it will be strong and not break. Like my work ? Buy me a coffee ….. Thanks Click here
Angled Pump Grip for the Nexus Pro X dart blaster. Hardware needed: Re-use 4 Screws from Original Grip. Optional: Re-use pin and roller from Original Grip.
Toyota Lexus Screw Cover for Yaris, Auris, Corolla, Rav4 and other models I recommend black material, printed in 100% infill and support only under the long pin.
Perplexus is a 3-D ball-in-a-maze puzzle or labyrinth game enclosed in a transparent plastic sphere. By twisting and turning the sphere, players attempt to maneuver a small steel ball through an intricate maze composed of a number of…
Experience the pinnacle of automotive opulence with this 3D printable STL model of the Rolls-Royce Phantom. This ultra-luxury sedan model is perfect for automotive enthusiasts and collectors of the finest vehicles, showcasing unparalleled…
Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…
Attach 6.5 and 6.75 speakers to a 6x9 factory Toyota/Lexus mount. Category: Automotive
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
Upgrade your miniature scenes with this curated pack of luxury chair, stool, and sofa STL files. This collection features high-quality models inspired by top designer brands, ideal for dollhouses, dioramas, architectural interiors, and…
Buffer Plate Sling Mount for the Nexus Pro hardware needed: 1 5mm x 20 mm bolt, with a head no wider than 8.5mm 1 5mm nut with 8mm wrench flats don't overtighten, your buffer tube is made of plastic Update: uploaded a .step file of the…
Amateur model, not dimensionally accurate, just for display.
