P
Printablescclontz
Kayak Keychain
I was always losing the keys to my kayak :) So I designed a simple kayak that has a hole on the back for a key ring.
- Downloads
- 1,237
- Likes
- 115
- Rating
- 4.83
Search results: yak
Counting matching models…
P
Printablesfermit
Lego compatible kayak
A Lego mini figure can sit in the kayak. The Kayak floats, but there is also a cover to protect it from water splashes. This flips over like a real kayak, nor very stable on the water. Print Settings Printer Brand: Creality Printer: Ender…
- Downloads
- 1,091
- Likes
- 177
- Rating
- 4.9
P
PrintablesOchutnej Hory
3D Printed Sea Kayak – Full-Size / 3D tištěný sea kajak v životní velikosti
English below 🇬🇧 Vytiskněte si vlastní loď! 🚣 Tento 3D tištěný seakajak v životní velikosti měří téměř 5 metrů a je plně funkční se vším co by správný kajak měl mít. Postavili jsme ho z 23 dílů, spojili 225 šrouby a chystáme se s ním na…
- Downloads
- 838
- Likes
- 415
- Rating
- 0
P
PrintablesWojciech Kapura
Sup board / kayak can drink holder
Hi! This is Sup board drink can holder i created for my friend which you might enjoy as well! Model is inspired by some video i saw online, but i couldn't find one for my requirements so i made one myself. No supports required
- Downloads
- 648
- Likes
- 176
- Rating
- 5
P
PrintablesMarcus Makes
Paddleboard/Kayak/Canoe Can Holder
The best can holder! Has a super snug fit and prints really nicely. I made mine out of PLA but I'm sure ASA would be perfect for the UV resistantance. PRINT SETTINGS: -No supports needed -0.2mm Layer height (Not too specific. Really…
- Downloads
- 596
- Likes
- 151
- Rating
- 5
P
Printablesbuzz89
Paddle Clip for 2 Sets of ITIWIT Kayak Paddles
Everybody who owns one of these ITIWIT Inflatable Kayaks knows the Pain: Lugging around the Paddles sucks. So i designed a clip to hold it all together nice and tidy. Print with ABS/PET or PLA, at least 3 Perimeters, 35% gyroid infill. It…
- Downloads
- 505
- Likes
- 142
- Rating
- 5
P
PrintablesAaronTMG
Yak 3e Russian fighter plane
The Yakovlev Yak-3 (Russian: Яковлев Як-3) was a single-engine, single-seat World War II Soviet fighter. Robust and easy to maintain, it was much liked by both pilots and ground crew. One of the smallest and lightest combat fighters…
- Downloads
- 486
- Likes
- 38
- Rating
- 0
P
PrintablesHandsomeGreg
Kayak Fishing Tray
2 part model tray and Scotty mount base. Tool holder and bait tray. 5mm screw and lock nuts is what I used but you could glue the halves together as well. No Supports needed, but if your printer doesn't bridge well use them.
- Downloads
- 444
- Likes
- 124
- Rating
- 5
P
PrintablesIan Foulds
Kayak Can Holder
This a can holder for your Kayak, there are several options to hold it down using the cargo webbing on your kayak. Either one strap through the middle or using the attachments points as shown in the picture.
- Downloads
- 421
- Likes
- 285
- Rating
- 5
P
Printablesmchangcreative
Ketch Karbonate cradle for kayaks
This is a holder for the Ketch Karbonate (specifically plastic 26" model ) fishing ruler that attaches to standard kayak accessory tracks (specifically for my Native Watercraft Slayer Propel 10 ). Disclaimers: I cannot guarantee that the…
- Downloads
- 391
- Likes
- 34
- Rating
- 0
P
PrintablesTHop3D
Little Kayak
Little Kayak model. Scale to your preferred size. If anyone has any questions please contact me, THop3D
- Downloads
- 372
- Likes
- 31
- Rating
- 0
P
PrintablesDeifox
Kayak parts
Kayak Attachments Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: No Resolution: .100 is what I used. Infill: 65% is what I used. Notes: I made mine out of ABS. Category: Sport & Outdoors
- Downloads
- 346
- Likes
- 105
- Rating
- 5
P
PrintablesKerryO
Kayak paddle holder
Needed to hang the kayak paddles when not in use. Bracket is made for the handles to snap fit and my be a bit tight for some paddles. Designed in Fusion 360, printed with PETG in Prusa MK3 with .02 nozzle.
- Downloads
- 342
- Likes
- 86
- Rating
- 5
P
PrintablesPower Jojo
![Gundam Dummy 13 Legs [Hyaku Shiki]](https://media.printables.com/media/prints/954080/images/7277132_46e37920-f9a1-4a3e-9f49-bfbe3823089f_114923b3-3328-4ec8-80bd-644c96eba3d7/20240725_152148.jpg)
Gundam Dummy 13 Legs [Hyaku Shiki]
I am still working on it. only legs are ready at the moment. [ Ignore print quality my filament is really old and brittle ] Hope you like it. Please share your feedback!! Also check my other Gundam model Dummy 13 wears Mobile Suit Gundam…
- Downloads
- 342
- Likes
- 133
- Rating
- 0
P
PrintablesMeerkat
Kayak / Boat Gear Pocket
Keep all your fishing gear organized in your kayak or boat. Space for Pliers, hooks, lures, traces and more. Should ideally be printed using PETG but I used PLA because I haven't quite mastered PETG settings. I included holes for Bungee…
- Downloads
- 315
- Likes
- 89
- Rating
- 5
P
Printableslowrizzle
Old Town kayak Garmin Strike transducer mount
I needed a way to mount my transom-mounted garmin strike transducer to my new Old Town Sportsman 120 PDL kayak. I found a few designs here that I was able to quickly munge up to make a specific part. I used the profile of the base/mount…
- Downloads
- 305
- Likes
- 18
- Rating
- 0
P
PrintablesPower Jojo
![Gundam Dummy 13 Arms [Hyaku Shiki]](https://media.printables.com/media/prints/966689/images/7378707_eda5abb2-e035-4e2b-84d4-c52f71b8ad6c_5a38e99f-5930-49f7-9f54-f91cf4cfd3fb/1600.jpg)
Gundam Dummy 13 Arms [Hyaku Shiki]
I am still working on it. The model is almost done. [ Ignore print quality my filament is really old and brittle ] Hope you like it. Please share your feedback!!
- Downloads
- 298
- Likes
- 131
- Rating
- 0
P
PrintablesC0D3Man
Rotary Grip Kayak Paddle Holder
Big shout out to hotbrass for the original design! Remixed this with a center hole to use with the 45 degree adapter for my Kayak. ( https://www.thingiverse.com/thing:4780591 ) Printed in PETG. I did not have flexible filament so I…
- Downloads
- 294
- Likes
- 97
- Rating
- 0
P
Printableskili0
Black Myth: Wukong Dreadfire Yaksha Mask
在《黑神话：悟空》中，“恐怖之火夜叉面具”是一个具有重要背景和意义的深刻象征性物品 恶意和挑战的象征：Dreadfire Yaksha 面具可能代表游戏中的邪恶力量或挑战。夜叉在传统文化中经常被视为凶猛的恶魔或守护者，而这个面具可能象征着与这种强大力量的对抗或需要战胜。 角色和背景洞察：蒙版可能会揭示游戏中某些角色的背景或故事情节的各个方面。它可能与敌对力量或历史背景相关联，反映人物之间的冲突和关系。 文化和神话元素：…
- Downloads
- 290
- Likes
- 52
- Rating
- 5
P
PrintablesWill
Kayak Paddle T Handle
I used the original paddle T-Handle on my old paddles but I recently bought some Decathlon itiwit two-part adjustable paddles and needed a male and female.…
- Downloads
- 289
- Likes
- 40
- Rating
- 0
P
PrintablesMfann72
kayak skeg w/bracket
I remixed this from a skeg i found on another site, made the skeg taller, and created a bracket that can be glued using rubber cement, so I can remove the skeg for transport and/or storage.
- Downloads
- 278
- Likes
- 68
- Rating
- 5
P
PrintablesAbhiram Rachamadugu
Majima Goro bust from Yakuza
Bust of majima from yakuza series
- Downloads
- 273
- Likes
- 35
- Rating
- 0
P
PrintablesFliegenfisch
Kayak pliers holder
I designed a pliers holder for my kayak and installed it on my kayak. An M6 slot nut and a screw are required for installation
- Downloads
- 269
- Likes
- 55
- Rating
- 5
P
PrintablesSzymon Adamczyk
Yak-141 Freestyle print-in-place micro jet fighter
About the Yak-141 Freestyle The Yakovlev Yak-141 Freestyle, also known as the Yak-41, is a Soviet supersonic vertical takeoff/landing (VTOL) fighter aircraft designed by Yakovlev. Intended as a replacement for the subsonic Yak-38 with…
- Downloads
- 264
- Likes
- 38
- Rating
- 5
P
Printablesflol3622
Kayak propeller -
First try at making a fully 3d printed propeller for my kayak with the help of https://www.wageningen-b-series-propeller.com/ No support ofc ;-) Hold together with zip ties The end-goal is a drill powered 3d printed trolling motor for my…
- Downloads
- 260
- Likes
- 59
- Rating
- 4
P
PrintablesSergo_Kos
Yak-52 kit card plane / Як-52 набор литник
English Hello to the aircraft modellers!! I present to you a 3d model of the kit card of the Soviet Yakovlev Design Bureau Yak-52 aircraft. This aircraft is designed for pilot training and aerobatics training. ATTENTION! This model is a…
- Downloads
- 255
- Likes
- 45
- Rating
- 0
P
Printablescg.mllr100
Inflatable SUP/Kayak Halkey-Roberts Valve inflation adapter
This is a remix of the Inflatable SUP/Kayak Halkey-Roberts Valve inflation adapter posted by lieutenantglorp here: https://www.thingiverse.com/thing:2354966 . It was too small for my hose which is why I remixed it. It should fit most…
- Downloads
- 252
- Likes
- 12
- Rating
- 5
P
PrintablesSpeed
Garmin Striker Transducer Kayak Mount
Like a number of you, I'm finding that the universal transducer mounting plate is not very universal for the Old Town Kayak. So I'm making my own custom mounting plate for my Garmin Striker transducer. I've got it so that the transducer…
- Downloads
- 242
- Likes
- 27
- Rating
- 0
P
Printableshotbrass2005
SOT Fishing Kayak
Simple 8" long model of a sit-on-top fishing kayak designed to set on a desk as a decoration. I revised this model so it is closer to being ready to print. I had to remove the milk crate from the previous model as I could not get it to…
- Downloads
- 241
- Likes
- 24
- Rating
- 5
P
Printablesusername1234
Yak Attack Style kayak gear track
This is a track system that is modeled after the yak attack gear track so the screws are on the outside instead of in the track i havent printed it yet but i dont see why it wont work Print instructions Category: Sport & Outdoors
- Downloads
- 241
- Likes
- 58
- Rating
- 0
P
PrintablesPaul Aughey
Kayak Paddle Holder
Holder for resting your paddle while kayaking. This version is pretty high-profile, so best for fishing kayaks or similar (not so much for whitewater boats). I printed the holder part in TPU and the base in PETG. The holder and base is a…
- Downloads
- 231
- Likes
- 61
- Rating
- 0
P
PrintablesEd Gauthier
Modular divider system for YakAttack ShortStak
A divider system used to create sections within a YakAttack ShortStak. Consists of mounting brackets, connectors, and dividers. Brackets are secured to the inside walls of the ShortStak. Connectors are secured to the bottom of the…
- Downloads
- 227
- Likes
- 42
- Rating
- 5
P
PrintablesTyler Nielsen
Lifetime Kuna 100 Kayak Seat Clip
A replacement seat clip for the Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) A more flexible material than PLA is recommended. This part can be printed with PLA (as seen in the provided photos). It will fit and work, but it is a bit…
- Downloads
- 226
- Likes
- 18
- Rating
- 0
P
PrintablesYAKoholic
kayak rudder
this is a remix from https://www.thingiverse.com/thing:4667942 the original was not complete by the designer as it was missing files and to download the complete files you would have to purchase it from him. I used the 2 part he included…
- Downloads
- 222
- Likes
- 43
- Rating
- 0
P
PrintablesC0D3Man
Crew Kayak YakAttack Geartrac
First off, big shoutout to Macscott56 for the original! Recently purchased a Crescent Crew Kayak and wanted the accessory rails. I modified the original to print sections to get the overall lengths I needed. If you make it, post it! :)…
- Downloads
- 218
- Likes
- 52
- Rating
- 0
P
PrintablesEnDiMa_Designer
Watch Holder Kayak
Watch holder to be applied via suction cups to the Kayak. Since each boat has its own shape, I inserted various 3D models with different angles to adapt to the attachment surface. The two suction cups are 40mm in diameter and have a M4…
- Downloads
- 214
- Likes
- 12
- Rating
- 5
P
PrintablesCyclimbo
Jackson Kayak Drain Plug
Correct dimensions for a Jackson whitewater kayak drain plug prior to 2015-ish when they changed plugs. Yopsolo's plug fits, but is about 3mm too long to bottom out correctly on my kayak. Shortened the threaded portion, filled the center…
- Downloads
- 213
- Likes
- 30
- Rating
- 0
P
Printablesmathp
Paddle holder for Kayak
Firmly holds your paddle while fishing. Mounts to your kayak with two 4 mm holes. Enjoy :)
- Downloads
- 211
- Likes
- 32
- Rating
- 0
P
PrintablesEvan "Taco" Bell
Kayak T-slot mounting
Made this to rivet on to the side of my sit-on kayak. Used 3/16 x 1" marine pop rivets. Should work fine with self-tap screws and screw/nut fastening. The print is in PETG to be UV resistant. I don't think you have to use every rivet hole…
- Downloads
- 210
- Likes
- 53
- Rating
- 5
P
PrintablesGooberGulfRC
Radio Box for Mayako MX8E E-buggy with Transponder and optional Aerial mount
Radio Box for Mayako MX8E E-Buggy – includes integrated transponder mount designed for MYLaps transponders. Designed for a clean, secure install of your electronics while keeping your transponder neatly positioned and protected. Perfect…
- Downloads
- 205
- Likes
- 4
- Rating
- 0
P
PrintablesFrank Keene
KAYAK PEDAL DRIVE INSERT
This thing is a pedal drive insert for a Hobie style pedal drive kayak (in my case a Lightning Strike) that clamps around a trolling motor shaft. It is designed to fit my MinnKota 30# thrust trolling motor with a roughly 28.6mm diameter…
- Downloads
- 204
- Likes
- 23
- Rating
- 0
P
PrintablesDylanmo
Lifetime Youth Wave Kayak Fishing Rod Holder
6in from top of flange to inside of spherical end. Mirror for use on both sides. Print only the flange section to serve as a template for cutting. Installed with silicone and 3/16in long grip blind rivets.…
- Downloads
- 203
- Likes
- 31
- Rating
- 0
P
Printablesalon-zil
3D printed YAK-9
3D printed YAK-9 great soviet ww2 era fighter
- Downloads
- 198
- Likes
- 32
- Rating
- 5
P
Printablesbatman
Lucky 13 / Mini 13 Kayak Paddles
Tiny kayak paddles for Lucky 13 / Mini 13. To print Print vertically (as imported) Print with a brim (to avoid tipping over) Print 0.15mm layer height File Selection Print a “mirrored” blade Print either a feathered or a standard blade…
- Downloads
- 195
- Likes
- 77
- Rating
- 5
P
PrintablesAinon3Dtisk
Kayak with paddle 1:10 for Traxxas TRX 4 Defender
Hello, I have a Kayak with a paddle 1:10 for Traxxas TRX 4 Defender . A very nice accessory for a 1:10 RC car. The kayak is fully authentic in 1:10 scale. Including oars, it even floats. Good luck with the printing! I used PLA/PETG as the…
- Downloads
- 189
- Likes
- 19
- Rating
- 5
P
Printablesblueridgeprintco
Lifetime Teton Pro Angler 116 Kayak Seat Risers
This is a set of seat risers for the Lifetime Teton Pro Angler 116 Kayak. They were designed to fit onto the existing seat mounts for the kayak but may require a little sanding to fit. This is a V1 so it may not be perfect but I have…
- Downloads
- 189
- Likes
- 23
- Rating
- 5
P
PrintablesRADprints
Kayak Gear Track
Kayak gear track modeled after a scotty track. 45mm wide and 180mm long. 5mm screw holes with countersink. Print upside down with tree supports for the countersinks. i haven't tried without supports but I like to be safe and not have…
- Downloads
- 188
- Likes
- 21
- Rating
- 0
P
PrintablesEugene Tkachenko
3D Printed Boat Propeller – 30° Pitch, 3-Blade for Electric SUP, Kayak, and RC Boats
Find 3D-Printed RC cars here.
- Downloads
- 186
- Likes
- 37
- Rating
- 0
P
PrintablesMrPorcine
Wall mounted kayak paddle hanger
Wall mounted rack to hold four blades. Print with the big end on the bed. With my Prusha MK3S I don't need supports. If I print with a 0.6mm nozzle and a 0.4mm layer height it takes a little under 7 hours to print. I used PETg, but really…
- Downloads
- 184
- Likes
- 58
- Rating
- 5
P
PrintablesOBA
Plug for water drain of Prijon T-Canyon kayak
Spare part/replacement for water drain plug: Kayak: Prijon T-Canyon (ca. 1995) Possibly also fitting for other Prijon Kayaks. Main Slicing parameters: - Slicing parameters used for Prusamet PETG - 0.2mm layer height - perimeters: 4 -…
- Downloads
- 176
- Likes
- 20
- Rating
- 5
P
PrintablesGrimGreeble
Simple Kayak Toy Model
Following a user suggestion, here's a simple, fun kayak toy boat for desk display, bath time play, dioramas, etc. This model comes in two variants: A realistic round-bottom version which captures the classic kayak hull shape for a more…
- Downloads
- 172
- Likes
- 9
- Rating
- 5
P
PrintablesRuudimental
Kayak Paddle mount
Print standing, bolt onto the side of the kayak. Didn't have a good photo available when i published this, my kayak isn't stored where i live.
- Downloads
- 172
- Likes
- 45
- Rating
- 0
P
PrintablesEvan "Taco" Bell
Kayak Paddle holder - for 3/16" rivets.
Made this to rivet on to the side of my sit-on kayak. Used 3/16 x 1" marine pop rivets. Should work find with self-tap screws and screw/nut fastening. The print is in PETG to be UV resistant. The hold is pretty strong but it definitely…
- Downloads
- 171
- Likes
- 29
- Rating
- 0
P
Printablestobias
Garmin inReach MINI kayak holder
Holder for inReach MINI on the kayak. Attach with one of the cords in front to have it in your reach. Do not forget to secure the inReach MINI to yourself with a cord, the device will come loose if you capsize and end up in the water.…
- Downloads
- 169
- Likes
- 27
- Rating
- 1
P
PrintablesJeff Chen
Vertical Stand for PS2 Hyakushiki SCPH-55000 GU
I bought a PS2 Hyakushiki SCPH-55000 GU but it didn't come with the bundled special stand. So here's my recreation of the stand. Print Print the two decorative plates in horizontal position for best quality. * Recommended layer height:…
- Downloads
- 165
- Likes
- 27
- Rating
- 5
P
PrintablesTechRoomFun
Kayak Drain plug
Replacement drain plug for a Perception Swifty Kayak. 3 pieces 2x TPU and 1x PLA/ABS/PETG The retention Tree can be Hot-glued or adhered to the plug using the adhesive of your choice. Hot glue worked for mine. The washer can be…
- Downloads
- 165
- Likes
- 33
- Rating
- 5
P
Printablesb1tshifter
Kayak Claw Anchor Storage
UPDATE 2 - Feb 15, 2022 Added photos showing how I used custom supports when slicing. YMMV - You know your printer best. UPDATE Feb 15, 2022 I just learned that the originally uploaded file was in inches. I don't know how that happened! I…
- Downloads
- 164
- Likes
- 42
- Rating
- 5
P
PrintablesTennessee Mats
Hobie Kayak Padeye Replacement
If a padeye on your kayak breaks or is lost then this is can be a useful replacement. In addition to the printed part you will need an eye bolt to screw into the center hole; I used ¼" with 20 threads per inch in this design since that is…
- Downloads
- 161
- Likes
- 23
- Rating
- 5
P
Printablesslipangle28
Kayak Paddle Drip Stop Ring
Designed some simple kayak paddle drip stops, designed to print in a flexible filament like TPU. The bore is 1.13 inches, which fit my 1.14 inch paddle shaft with a perfect balance of grip and adjustability. Print with low infill for best…
- Downloads
- 159
- Likes
- 37
- Rating
- 5
P
PrintablesMikedebarra
Riot Kayak Fins
Fins to fit older riot kayaks 1. 2" fin 2. 2.5" Fin 3. 1.5" Knubster 4. 1" Wake fin
- Downloads
- 158
- Likes
- 21
- Rating
- 0
P
PrintablesGunnski
Pelican Kayak Plug - TPU
The solution to all your wet kayak adventures: Simple Pelican Kayak plug with 3/8" round hole. Print with TPU preferably with two perimeters and 20% infil. Happy Printing and not Sinking!
- Downloads
- 156
- Likes
- 26
- Rating
- 0
P
PrintablesTyler Nielsen
Lifetime Kuna 100 Kayak Seat Clip and Hook
A replacement seat clip and hook for Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) These also fix the problem that some of my clip/hook pairs had where the hook wasn't tight enough to securely keep them together.
- Downloads
- 152
- Likes
- 26
- Rating
- 5
P
PrintablesOMac
Yakima Roof Rack End Cap
Lost an end cap for the Yakima roof rack. Could have bought a replacement cap for $5, but where's the fun in that?!? Printed in PETG, no supports. Fits as snug as the original. Added a simple design pattern but could easily be removed if…
- Downloads
- 147
- Likes
- 13
- Rating
- 5
P
PrintablesBen Summerfield
Model Whitewater Slicing Kayak
10% scale model of a full low backed Whitewater Kayak. Message me if you would like to buy the full size shell design. Category: Hobby
- Downloads
- 146
- Likes
- 8
- Rating
- 0
P
PrintablesClay Rade
Yak Mount
Saddle up and make your way up the mountainside, you're in Yak country! Yak_Decimated.stl is the file you want, the OBJ versions were added per a request! This is a 28mm scaled miniature suitable for tabletop roleplaying games, such as…
- Downloads
- 142
- Likes
- 38
- Rating
- 0
P
Printablesthall72
Lego Compatible (29110.dat) Boat Kayak 2 x 15
This model is compatible with the lego system.
- Downloads
- 140
- Likes
- 23
- Rating
- 5
P
PrintablesNoah Olmeijer
Nut and Coupling for Intex Kayak Paddle/Oar
The two nuts and coupling are used to assemble the paddle/oar of an Intex kayak. Coupling not compatible with original nut. See original parts:…
- Downloads
- 140
- Likes
- 25
- Rating
- 0
P
PrintablesZac M
Kayak Scupper mount for Striker 4 Transducer
This is a two part model intended for mounting a Garmin Striker 4 transducer via scupper hole on a kayak. The top and bottom pieces can be attached together using zip ties that go through the provided holes. This makes it a bit more…
- Downloads
- 138
- Likes
- 19
- Rating
- 0
P
PrintablesJason
Oru Kayak Seat Retaining Bracket
print on the back side 20% Cubic perimeters: 4 to 6 Print in PETG or Nylon CF Support: yes
- Downloads
- 138
- Likes
- 8
- Rating
- 0
P
PrintablesYAKoholic
kayak/canoe outrigger stabilizer pontoon
this kayak/canoe outrigger stabilizer pontoon is expandable to whatever segments you like use ¾" pvc pipe in the center hole fill-up the cavity with expandable closed cell foam or flotation foam for buoyancy and glue the segment with…
- Downloads
- 133
- Likes
- 19
- Rating
- 0
P
PrintablesJelle
Nerf flywheel puller for Kuryaka flywheels (Daybreak, Kepler, Pulsar)
3D printable piece, designed to work with the flywheel puller metal part made by Fetteworst, to pull any Daybreak, Kepler or Pulsar wheels (or any other wheels with the same top geometry) off a motor shaft, without risking bending the…
- Downloads
- 132
- Likes
- 30
- Rating
- 5
P
PrintablesBlindMolerat
Kayak Motor Steering Handle
I designed this model because i just couldn't find the right one to work with my kayak and motor. Would recommend printing in PETG or PETG CF to make sure it can withstand the heat and sun while kayaking. Requires a ball bearing to join…
- Downloads
- 130
- Likes
- 33
- Rating
- 5
P
PrintablesGuillemot
Maroske Flush Kayak Deck Fitting
Make a clean, flush mounting point for deck lines on a sea kayak. Drill two 1/2" holes 3/4" apart in your deck, seal the edges of the holes with epoxy, spread some g-flex epoxy around the tubes and flared section of the fitting, push it…
- Downloads
- 129
- Likes
- 10
- Rating
- 5
P
PrintablesMatt Hawley
Yakima JetStream Roof Rack End Cap Replacements
Did your end caps fly off somewhere along a long country road? Don't want to spend $5 to buy replacement end caps for your Yakima JetStream roof rack? I didn't either! These are designed as a replacement based on the original model that…
- Downloads
- 129
- Likes
- 16
- Rating
- 0
P
PrintablesSteve 3D
Yak
Miniature Yak. His name was Charlie. Printed with Bambu Matte Black Design was developed from base model Makerlab project Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
- Downloads
- 128
- Likes
- 16
- Rating
- 5
P
PrintablesModel Magic
Vintage Video Games - Yakuza - Kiryu Kazuma - 2006
Vintage Video Games - Yakuza - Kiryu Kazuma - 2006 3D printable model.
- Downloads
- 128
- Likes
- 16
- Rating
- 0
P
Printablesapplepieke
Sayaka Miki Hairpiece
Model I made for a friend of Sayaka Miki's hairpiece from the show Madoka Magica. My friend just planned on gluing a clip to the back so the back is flat to accommodate for that. I modeled it to the proportions of someone who is 5'3 so…
- Downloads
- 127
- Likes
- 5
- Rating
- 0
P
PrintablesSethR1223
Latching Kayak Paddle Clip
Latching paddle clips with around a 30mm diameter handle. There are LEGO-style pegs and hollows so a pair (or more) can be attached together to keep them all in the same place for when you go to use them again. Flexible version allows for…
- Downloads
- 126
- Likes
- 25
- Rating
- 0
P
Printablessolbero
Kayak Deck Ball
The shock cord fitted to the deck of most kayaks is ideal for storing a paddle or other equipment. But getting these items into place when seated in the kayak is not always easy. A deck ball is the answer. When fitted, it’s way easier to…
- Downloads
- 123
- Likes
- 29
- Rating
- 0
P
PrintablesLoboCNC
A Better Rudder (for Inflatable Kayak)
Well, better than my previous rudder ( http://www.thingiverse.com/thing:806945 ). Rotating the worm gear both adjusts the rudder angle and also tilts the rudder fore and aft. For normal steering angles (+/-20 degrees) the tilting does not…
- Downloads
- 121
- Likes
- 54
- Rating
- 0
P
PrintablesNinomalbinho
Little Thunder (Yakari)
A new 3D figurine generated by AI, Little Thunder (Yakari's horse). Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
- Downloads
- 120
- Likes
- 11
- Rating
- 5
P
Printablesindymodz
Garmin Fish Finder mount for Perception Kayak Solo mounts
I wanted a simple Fish finder mount for my kayak. I have a Perception Outlaw and it as well as other kayaks have the threaded holes for Ram mounts, this uses the holes to mount a Garmin Striker fish finder. I have used this for several…
- Downloads
- 120
- Likes
- 23
- Rating
- 5
P
PrintablesOLEGator Screb
8 tooth valve key for kayak, supboard, inflatable boat and etc.
top part and tooth would be 100% infill in all situations, handle I printed in 25%. I recommend to print it from PETG, ABS and etc.
- Downloads
- 119
- Likes
- 17
- Rating
- 5
P
PrintablesModel Magic
The Man From U.N.C.L.E. - Napoleon Solo and Illya Kuryaki Pistols - 1964-1968
The Man From U.N.C.L.E. - Napoleon Solo (Robert Vaughn) and Illya Kuryaki (David McCallum) Pistols - 1964-1968 3D printable model.
- Downloads
- 117
- Likes
- 18
- Rating
- 0
P
PrintablesJacob
Paddle Boat / Kayak / Canoe Can & Phone Holder
This Can and Phone Holder is designed to fit a can with a koozie <85mm. The phone holder slot is also 85mm in length and 15mm in width. It fits my Samsung Galaxy A32 with the case perfectly. My print of this variant of the design was done…
- Downloads
- 116
- Likes
- 41
- Rating
- 0
P
PrintablesDeifox
Kayak modular attachments
I wanted to make a stronger pad eye attachment for my cousins kayak, but wanted it to be printed easily. So I came up with this modular design, which allows you to swap between different attachments. I wanted the feet to be printed flat,…
- Downloads
- 116
- Likes
- 57
- Rating
- 0
P
PrintablesAlexander Meyer
Kayak Paddle Extender - Aqua Marina
Extends Aqua Marina paddle (29.2 mm in diameter) with 120 mm. Surprisingly strong and friction fit. Print Settings: Printed in PLA 5 walls, 35% grid infill (I used Cura) Brim is needed, no supports are needed I printed this on SV04…
- Downloads
- 114
- Likes
- 29
- Rating
- 5
P
PrintablesNinomalbinho
Yakari
A new 3D figurine generated by AI, Yakari. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
- Downloads
- 112
- Likes
- 10
- Rating
- 0
P
Printablespv3d
bayak of siwa
his is a 3D printable figurine of Bayek of Siwa, the legendary Medjay from Assassin’s Creed Origins. The model is designed for display and collectible purposes and works great as a statue or miniature. Perfect for: • Assassin’s Creed fans…
- Downloads
- 112
- Likes
- 10
- Rating
- 0
P
PrintablesAlwaysTinkering
Kayak or Boat plug
This is a replacement boat plug that has an opening of about ¾" or about 19mm. It has a groove for grommet ¾" OD and 9/16" ID and 3/32" cross section. Since you print it handle down you will get a nice flat seat and may not need the…
- Downloads
- 110
- Likes
- 21
- Rating
- 0
P
PrintablesTheBean
Kayak Phone Mount (Scotty Mount)
Kayak phone holder mount to go in a Scotty fishing pole holder mount. Settings are set for an iPhone 13. Edit parameters in Fusion 360 file to adjust phone size, mount height, and angle. Print rod standing straight up (without supports is…
- Downloads
- 109
- Likes
- 30
- Rating
- 0
P
PrintablesMrPorcine
Kayak deck fitting for 1/2" (12mm) webbing
Attach 1/2" webbing with a single screw
- Downloads
- 104
- Likes
- 22
- Rating
- 5
P
PrintablesVerbs
Lifetime Kayak Seat Clip
Was frustrated for a long time as the mount for our Lifetime Kayak wouldn't hold the seat in place. When at the store yesterday looking at a new Kayak, discovered we were missing a clip. While this clip is not as fancy as the original,…
- Downloads
- 102
- Likes
- 17
- Rating
- 0
P
PrintablesZac Myers
Haswing Protruar Brushless 1.0 12v Trolling Motor Rudder for Kayak
This is a relatively basic rudder model I created to fit the Haswing Protruar Brushless 12v Trolling Motor. This motor is sold under other names as well, so if you have a chinese 12v brushless trolling motor chances are this will fit. The…
- Downloads
- 99
- Likes
- 21
- Rating
- 0
P
PrintablesBehndthmask
Hobie Mirage Lynx Kayak Skid plate
Protects the seam and bottom of the kayak from the ground when loading and unloading. Uses the original bolts that come with the smaller skid plates.
- Downloads
- 98
- Likes
- 1
- Rating
- 0
P
PrintablesChildsPlay3DPrints
Lifetime Kayak Plug
This fits all the lifetime kayaks. print using TPU and 100 % infill along with 2-3 walls
- Downloads
- 98
- Likes
- 24
- Rating
- 5
P
Printablesvidision
Wall Bracket for Kayak & SUP Paddles
Unlike my recent windsurf mast holder, I just went with a single screw hole. This should be enough for lightweight paddles (as long as the screw hold is solid). With the trim plug and right choice of screw (or paint), you can make very…
- Downloads
- 97
- Likes
- 24
- Rating
- 0