82 models
These unobtrusive LED bars shine light at the print from both sides, for great visibility even on the first layer. This version uses a switch. Design features: This design adds a switch to my previous design:…
Print approx. €2.82–€3.44 excl. taxPreliminary estimate for one variant
These unobtrusive LED bars shine light at the print from both sides, for great visibility even on the first layer. Easy wiring and installation with commonly available parts. Design features: The light shines from opposing sides, to…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
Yet annother power strip holder. Designed with IKEA Koppla in mind. Works with a variety of variants from other brands.
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
I designed a simple holder for my AC remote, as I was unsure if the models available on Printables would fit. Therefore, I quickly created my own design. This holder is specifically designed to fit the YAP1F7 remote. Additionally, there…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
Bored of the stock knob from your original Prusa printer? This one is for you! A round, spiky knob that provides a better grip, and a concave part for easier pushing. Also plug & play. Use a small lever to remove the old one, snap in the…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Yet annotherPC Stand but thist time with a minimalistic touch. Want to make your own remix. No problem, *f3d file included.
Print approx. €1.95–€2.39 excl. taxPreliminary estimate for PETGSource material: PET
Both Arc's fit the front and back of the drone and can be fixed with zip-ties to it. The bars on the side fit under the X-Plate which mounts the arm's of the drone.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Here is another Raspberry Pi V2 camera bracket. The bracket mostly snaps together but requires two screws and 2 nuts to assemble. One M2 square nut and and screw to attach the Camera to the idler arm and one M3 hex nut and screw to hold…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Zrobiłem niestandardowy przedni zderzak do Babyape 2 w DarwinFPV
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
"Bringing divinity to life, one layer at a time. ✨ From the meditative grace of Lord Ayyappa to the youthful peace of Bala Murugan, our latest 3D prints are crafted with devotion and precision. 🕉 Perfect for your home mandir or a gift…
Lightweight and small front bumper for the DarwinFPV BabyApe Pro.
Bu model, Deneyap anahtarlığı olarak tasarlanmış, çift renkli filament ile basılmış bir anahtarlık tasarımıdır. Deneyap logosu ve kuruma özgü detaylarla kişiselleştirilmiştir. Gençlere ve eğitim meraklılarına uygun olup, 3D baskı deneyimi…
The infamous budget baller. V2 arms may not be fully accurate dimensionally as I only have the V1 frame, but luckily the changes are pretty minor.
A small and lightweight mount for the 2,4Ghz Happymodel antenna on the BabyApe Pro.
Bu projede, piyasadaki zayıf şarjlı el süpürgelerinden ilham alarak 10 kat daha güçlü bir versiyon tasarladık. 3D baskı gövdesiyle tamamen yeniden tasarlanan bu mini süpürge, atölyede veya arabada kullanmak için mükemmel. 👉 Tüm yapım…
A small and lightweight arm and motor protectors for the BabyApe.
Hope you enjoy my little babyApex, a scaled version of the famous impulseRC Apex. This was developed to be tiny freestyle quad to be flown in my backyard. Running either the nebula 14mm nano or the nebula 19mm pro camera. weight with the…
Some TPU-Prints for my DarwinFPV BabyApe Print Settings Printer: Artillery Genius Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 50% Filament: SainSmart TPU orange Category: R/C Vehicles
DarwinFPV BabyApe Ⅱ drone tpu protector for arms. Print 2 of them mirrored for 1 side and 2 of them directly for one side. I used TPU 95A, without support.
Yet Anathor Props Dagger. I did dual color by stoping mid print and change filament. Print 2 and glue together if used as cosplay props. To open paper mail print one. No need for support. PLA worked for me, but any filament should work.…
Kendin Yap Yardımcı El Gömme Somun Aparatı , ısı ile gömme somunları 3D baskı parçalara düzgün, hızlı ve güvenli şekilde yerleştirmenizi sağlar. Ergonomik yapısı sayesinde hizalama kolaydır, somunlar tam derinlikte ve düzgün oturur.…
After checking out several pillboxes there weren't any that fit my needs that were a single box with AM/PM slots and fit the larger, “horse” pills. One side is AM and then flip it over for PM. It also starts with Monday first. With…
A small mount for a Insta360 Go2 camera for the TinyApe Freestyle 2.5'' drone from DarwinFPV. (An improvement of my other model design https://www.printables.com/model/237689-tinyape-insta360-go-2-mount) +Much easier to take camera in an…
There must be hundreds of these so called "poop buckets" for Bambu Labs P1 and X1 3D printers. Yet, I couldn't find one that was just right. Not too big, simple magnet attachment, won't block chute, and looks good. I like this size, about…
A small mount for a Insta360 Go2 camera for the TinyApe Freestyle 2.5'' drone from DarwinFPV. -25 degrees angle -Space for battery (20,5mm x 14,5mm). Made for Tattu R-Line 550Mah, but may fit others also. -Printed with Filamentum Flexfill…
This camera mount works with all Runcam Thumb cameras and the original camera holder. The 2 screws in the back are the original screws, whereas the one in the front is a spare M2 with a self locking nut. Best to remove the top plate of…
Print in TPU 0.2mm 15% infill 2 perimeters
I looked for a good use for these small transparent pill bottles from Walgreens drug store. They are great for storing small parts, SD cards, thumb drives, pills, vitamins, screws, or any other small item that you want to organize. It is…
Bu proje, basit bir lehim fanı/duman emici sisteminin 3D yazıcı ile üretilebilen tüm parçalarını içermektedir. Standart boyutlardaki bir fan motoruyla uyumlu olarak tasarlanmış bu parçalar, lehim yaparken ortaya çıkan dumanları…
For my Octoprint project I tried to create a simple and compact holder/mount for the Raspberry Pi Zero 2 W. During the design phase I decided to create a standalone case for testing purposes resulting in this fully printable case. The…
This model is screwless, although this means that the fit isn't perfectly tight when put together and can vibrate slightly. (Not enough to make a difference or create a problem but it's worth noting.) Use this U.FL to SMA adapter:…
Deneyap Kamera Tutucu / Deneyap Kamera Holder / Deneyap Kamera Yuvası This is a custom-designed holder for the OV2640 camera module, ensuring secure mounting and alignment. It features: Mounting Holes : Two M2 screw holes to secure the…
Small TPU pigtail holder. Countersunk nut profile so the pigtail can't turn when you screw the antenna on. it took a few iterations until it fits for all my different pigtails, so v9 is my final design for now, but i inlcuded some of the…
To hold a power brick under a piece of furniture. With screw holes. Inner measurement: 58 x 34 x 8, total width with mount point: 80 Category: Organization
3D model to hold 7 test tubes with the size of 20 x 110 mm to build a nice plant propagation station. test tube example link: 20 x 110 mm https://amzn.eu/d/g2a5fZL
Information ‘YAHH Remix.fcstd’ - This is the FreeCAD file (ver 0.21.2), you can use this to change the dimensions of the model by entering your desired measurements into the table ‘Values’. (You shouldn't need to add clearance, it adds…
darwin babyape landing pad print in TPU Category: DIY
Temporary replacement for BabyApe arm.
Introducing the YAPPM (Yet another Pi Pico Macropad). I know there's a bunch of other macropads involving various microcontrollers, but this one is mine. It utilizes a Raspberry Pi Pico (of course), and a mechanical keyboard switch I had…
Added the "wings" so the battery cables cannot get caught by the rotors.
This is a token for anyone who you think talks too much. :)
Shorter (v10) and longer version (V11, best with a stubby). While small and light i wasn't to happy with the way the strain that lasted on the pigtail with my first version. This started as a prove of concept kitbash of my old part but it…
baş üstü kulaklık tutucu kendinize özel isim ekliyebilirsiniz
Yes, there had to be one more phone stand! Hahaha! This one addresses the problem of covered microphone and speaker so you can use it as speaker phone without having muffled audio. No supports required if you print on side. If you print…
07/19/2020 - Adapted size of mount bar (no overhang) YAPiC B3+NEW (Yet Another Pi Case) is light but sturdy. It's grill structure allows the Pi to breathe easily, so it won't overheat. (For Pi 3b+) Mount it on the upper lefthand side of…
Update: 28 April 2025: Recently picked up a Raspberry Pi Zero 2W kit that included a CPU heatsink. Neither of the existing lids clear the heatsink, so I created a new version of the solid lid with a cutout. Printed in white, because…
No TPU needed Layer height: 0.16mm
I use a thick clear TPU protective case on my smartphone which made it difficult to find a phone stand it would fit in, so I designed my own. To keep the phone stand from sliding around when in use, I recommend applying bumpers to the…
GoW 2018 Great Serpent Avatar CherryMX keycap Added a few fangs to make it look a bit scarier. Category: Video Games
This is my first Tinkercad project of a quick support free flower pot with tray. It is 80mm x 80mm x75 mm high. Needed a fairly quick printing pot to make several for around the house to re-pot all those tiny plastic cups everything comes…
New tail section for DarwinFPV BabyApe II to house circular polarised antenna with UFL cable. The cup is 17mm in diameter. There are three lengths of the model, one is as low as possible, and the other two are a bit higher up. With the…
A core one purge bin written in FreeCad. The model is parametric, for example the number and size of the magnets can be adjusted in FreeCad. Currently only round magnets are supported but you can edit the sketch to make them rectangular.…
*USE AT YOUR OWN RISK* High risk of getting the camera chopped up by props Putting a digital video system into the BabyApe ProV2. A great example of Just because you can doesn't mean you should. I did it anyways :) Designed for the Runcam…
Filament için gerekli ham madde ihtiyacı olan şişeyi doğru orantıda kesme aparatı
Pretty jank, I traced a picture of the arm and scaled it to measurements of mine. intended for cf
I downsized this model to fit over the stock Darwin FPV cement camera. Nice and snug.
Babyape 2 light weight arm supports.
Great gift for the yappers in your life
Printsheetholder for three printsheets for the prusa mini. To print it on the mini
This is a snow shield for the BabyApe II drone (not V2; maybe it works, but I don't have one). BabyApe II is a cool, water-resistant drone that works well in snow. But all the electronics get filled with snow. This is a small cover to…
Simple 4-sheet magnetic mount for the left side of the Prusa CORE One. Uses 15 (!) round magnets, 8mm x 4mm.
I've searched for a paint bottle rack for the Army Painter Air Starter Kit and … You know, only own creations fit best :-) Print Settings Printer: Anycubic i3 Mega S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Anycubic PLA…
Front TPU part with an action cam mount for the DarwinFPV BabyApe III Pro 3.5". Uses the smaller GoPro style mount used in Runcam Thumb 2. Replaces the GPS, so it has to be removed or moved.
Yet Another Pen Holder made with tinkercad Category: Organization
I mean, it's a tool holder, which attaches to the original prusa enclosure. Mirror it if you want it on the left side. Four hex screwdrivers, 5 small Torx drivers, 2 Allan wrenches and a hole for the magigoo tube (sung to the tune of 12…
Top plate, camera mount brace for the Babyape 2 3.5 inch, Filament type TPU.
yipady yapady get of my property sign
This is for a Babyape_2. Perfect fit nice and snug antenna mount with minimal weight.
Front TPU part with an action cam mount for the DarwinFPV BabyApe III Pro 3.5". Uses the smaller GoPro style mount used in Runcam Thumb 2. Relocates the GPS further back and the USB-C connector to the front.
Print in TPU for best results.
Preferably TPU, add support. Enjoy.
I came across quite a few print-and-fly airplanes. personally i found that they were tough to print. Especially the wings. So here I introduce a completely different form of making the wing. Instructions It is printed in vase print only…
After installing the engine, do not forget to add a vacuum cleaner or turbo fan to the end of the engine and make the - / + connections. Motoru taktıktan sonra motorun ucuna süpürge yada turbo fanı ekleyip bağlantıları - / + yapmayı…
baş üstü kulaklık tutucu kendinize özel isim ekliyebilirsiniz
"Bringing divinity to life, one layer at a time. ✨ From the meditative grace of Lord Ayyappa to the youthful peace of Bala Murugan, our latest 3D prints are crafted with devotion and precision. 🕉 Perfect for your home mandir or a gift…
After installing the engine, do not forget to add a vacuum cleaner or turbo fan to the end of the engine and make the - / + connections. Motoru taktıktan sonra motorun ucuna süpürge yada turbo fanı ekleyip bağlantıları - / + yapmayı…
This is for a Babyape_2. Perfect fit nice and snug antenna mount with minimal weight.
3D printable topographic miniature of Jayapura - 🇮🇩 Indonesia Capture the beauty of Jayapura 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates -2.539, 140.706…
Sanyappu est la fusion harmonieuse des trois esprits élémentaires : le feu, l'eau et la plante. Arborant les traits distinctifs de ses trois origines, cette créature unique possède une capacité d'adaptation exceptionnelle, capable de…
